Evaluation of different operating modes of an autosampler for portable capillary electrophoresis.

A compact, inexpensive sampler instrument for portable capillary electrophoresis (CE) was developed and tested to monitor common inorganic ions in drinking water samples. The sampler uses peristaltic and vacuum pumps and pinch and check valves to control liquid flows. The paper also addresses various aspects of CE associated with portability, open access instrumentation and prospects of CE for citizen science. The extensive use of items provided by the electronic and computer industry contributes to this trend.

Autosampler for portable capillary electrophoresis.

A compact, inexpensive sampler instrument for portable capillary electrophoresis was developed for monitoring illegal drugs in human body fluids and evaluated for γ-hydroxybutyric acid (GHB) in simulated saliva samples. The sampler uses peristaltic pumps and pinch and check valves to activate liquid flows. This short communication addresses aspects of CE associated with portability, open access instrumentation, and prospects of CE for citizen science. The extensive use of items provided by the electronic and computer industry contributes to this trend.

Portable fully automated oral fluid extraction device for illegal drugs.

Currently used methods for in-field determination of illegal drugs involve various test kits based mainly on the immunoassay technique, where the presence of a compound of interest is assessed by antibody-antigen reaction and manifested by observable color change. Despite being accepted and widely used by police forces to test the presence of illegal drugs in a suspect person, these tests often suffer from unreliable results (high level of false-positive and/or false-negative) due to the cross-reactivity and difficulties with quantification. Therefore, we have developed a portable capillary electrophoresis instrument to determine illegal drugs in oral fluid collected from a suspected person. However, this drug analyzer has still required manual sample preparation. Therefore, this research aimed to develop, test, and validate a fully automated sample pretreatment (purification, extraction, pre-concentration) prototype compatible with the capillary electrophoresis drug of abuse analyzer and suitable for confirmatory analysis by mass spectrometry. The cotton swab from Salivette® oral fluid collector was examined and integrated into the fully automated extractor prototype. The recoveries for the automated extractor were between 18 and 20%, with repeatabilities within 5-11% for 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxy-N-ethylamphetamine (MDEA), cocaine (COC), and cocaethylene (COET). The developed extraction device was easy to use even for unskilled persons, required minimal liquid handling, and was applicable to use in field conditions.

Capillary Electrophoresis as a Monitoring Tool for Flow Composition Determination.

Flow analysis is the science of performing quantitative analytical chemistry in flowing streams. Because of its efficiency and speed of analysis, capillary electrophoresis (CE) is a prospective method for the monitoring of a flow composition withdrawn from various processes (e.g., occurring in bioreactors, fermentations, enzymatic assays, and microdialysis samples). However, interfacing CE to a various flow of interest requires further study. In this paper, several ingenious approaches on interfacing flow from various chemical or bioprocesses to a capillary electrophoresis instrument are reviewed. Most of these interfaces can be described as computer-controlled autosamplers. Even though most of the described interfaces waste too many samples, many interesting and important applications of the devices are reported. However, the lack of commercially available devices prevents the wide application of CE for flow analysis. On the contrary, this fact opens up a potential avenue for future research in the field of flow sampling by CE.

Complete capillary electrophoresis process on a drone: towards a flying micro-lab.

Hazardous remote places exist in the world. Why should health or life be risked sending a scientist to the investigation site, as the remote analytical instrumentation exists? Different scientific fields require instruments that could be used on-site (in situ), therefore the purpose of this work was to design a fully automated chemical analysis system small enough to be mountable on a drone. Here we show an autonomous analytical system with sampling capability on a drone. The system is suited for the remote and autonomous analysis of volatile and non-volatile chemicals in the air. The designed system weighs less than 800 g. Data are transmitted wirelessly. Collected substances are separated automatically without the intervention of the operator using the method of capillary zone electrophoresis. The analytes are detected using a miniaturized contactless conductivity detector quantifying them down to less than 1 µM. In this work, we demonstrated sampling and separation of volatile amines (triethylamine and diethylamine) and organic acids (acetic and formic acids), non-volatile inorganic cations (K+, Ca2+, Na+), and protein (bovine serum albumin) in the aerosol state. It was shown that the capillary electrophoretic analysis can be performed on a hovering drone. We anticipate our work to be a starting point for more sophisticated, autonomous complex sample analysis. We believe that our designed instrument will enable the investigation of hazardous places in different research fields.

Use of a newly-developed portable capillary electrophoresis analyser to detect drugs of abuse in oral fluid: A case study.

The aim of the current study was to develop and validate an analytical method to determine whether drugs of abuse (DOA) were present in oral fluid (OF) using a newly-developed, portable capillary electrophoresis (CE) instrument coupled to a deep ultra-violet fluorescence detector (FD). The performance of this portable CE-FD DOA analyser was tested at the Weekend Festival Baltic (Pärnu, Estonia) between 2016 and 2018 as well as on the roadside OF samples collected by the police. The study reported 128 analysed cases in which persons were allegedly found to have been under the influence of DOA. The samples were analysed for amphetamine (AMP), methamphetamine (METH), 3,4-methylenedioxy-methamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxy-N-ethylamphetamine (MDEA), cocaine (COC) and cocaethylene (COET). Subsequent toxicological reports revealed that 26% cases were negative, and 74% were positive. The most frequently detected and quantified DOA was MDMA (68 cases, 62%). A comparative study was conducted to validate the accuracy of using the CE-FD DOA analyser versus classic high-performance liquid chromatography coupled to mass spectrometry (HPLC-ESI-MS). Diagnostic statistics for CE-FD DOA were also evaluated and were higher than 99.5%. In addition, all zeta-scores were lower than 2 when both methods were compared, showing that the CE-FD analyser can be implemented as a reliable, sensitive and convenient tool for roadside and workplace testing for DOA.

Rapid and sensitive capillary electrophoresis method for the analysis of Ecstasy in an oral fluid.

In the present study, a capillary electrophoresis method, with a native fluorescence detection for the quantification of three amphetamine derivatives, methylenedioxyamphetamine (MDA), 3,4-methylenedioxy-methamphetamine (MDMA), methylenedioxyethylamphetamine (MDEA) in an oral fluid is described. The reported CE method has made it possible to assess Ecstasy abuse in approximately 15 min, including a saliva sample collection, pretreatment procedures and capillary electrophoresis (CE) analysis. The proof of the principle that was demonstrated on a home-made lab scale instrument has had the potential to be easily translated onto a truly portable instrument for on-site measurements. The baseline CE separation of the three illegal drugs was achieved in 10 min, by applying an aqueous background electrolyte (BGE) that was composed of 40 mM phosphoric acid and 10 mM triethanolamine. The amphetamine derivatives were detected at their λex/λem maximum (280/326 nm) with LOD values of about 3 ng/mL for each amphetamine. The recovery of the compounds from the collection pad was about 40% of the LOQ concentrations and the inter-day precision was less than 6% for all of the analytes. The procedure was applied to a quantitation of oral fluid (OF) samples that were collected during the Baltic Weekend Music Festival that was held in Estonia.

Compensation of the baseline temperature fluctuations for autonomous CE-C4D instrument working in harsh environments.

One of the main problems of the remote complex sample analysis instrumentation is that such systems are susceptible to temperature fluctuations. Temperature regulation is energetically ineffective, and it is not used in most of the field portable analytical systems. Separations performed in a changing temperature environment provide electropherograms with considerable baseline fluctuations, resulting in significant errors in detection and integration of the peaks. This paper describes electropherogram baseline compensation that is suitable for the capillary electrophoresis-contactless conductivity detection analytical method. The baseline compensation utilizes linear or polynomial data processing methods, and can be programmed in-line using simple microcontroller, or on-line and off-line in data acquisition software. This method is targeted for field portable and autonomous analytical systems that are utilized in a fluctuating environment.

Capillary Electrophoresis Sensitivity Enhancement Based on Adaptive Moving Average Method.

In the present work, we demonstrate a novel approach to improve the sensitivity of the "out of lab" portable capillary electrophoretic measurements. Nowadays, many signal enhancement methods are (i) underused (nonoptimal), (ii) overused (distorts the data), or (iii) inapplicable in field-portable instrumentation because of a lack of computational power. The described innovative migration velocity-adaptive moving average method uses an optimal averaging window size and can be easily implemented with a microcontroller. The contactless conductivity detection was used as a model for the development of a signal processing method and the demonstration of its impact on the sensitivity. The frequency characteristics of the recorded electropherograms and peaks were clarified. Higher electrophoretic mobility analytes exhibit higher-frequency peaks, whereas lower electrophoretic mobility analytes exhibit lower-frequency peaks. On the basis of the obtained data, a migration velocity-adaptive moving average algorithm was created, adapted, and programmed into capillary electrophoresis data-processing software. Employing the developed algorithm, each data point is processed depending on a certain migration time of the analyte. Because of the implemented migration velocity-adaptive moving average method, the signal-to-noise ratio improved up to 11 times for sampling frequency of 4.6 Hz and up to 22 times for sampling frequency of 25 Hz. This paper could potentially be used as a methodological guideline for the development of new smoothing algorithms that require adaptive conditions in capillary electrophoresis and other separation methods.

In Situ Determination of Illegal Drugs in Oral Fluid by Portable Capillary Electrophoresis with Deep UV Excited Fluorescence Detection.

The present study demonstrates the potential of a portable capillary electrophoresis (CE) instrument, coupled to deep UV fluorescence detector (FD) with a 230-255 nm excitation wavelength range, for the determination of the abuse of illegal drugs in oral fluids in situ. CE was introduced in this study due its exceptional power of separation and resolution, short analysis time, and ability for miniaturization for on-site assessment of different substances. The deep UV fluorescence detector was equipped with five interchangeable emission filters, in the emission wavelength range from 278 to 600 nm, and was successfully employed for determination of natively fluorescing illegal drugs, such as cocaine, cocaethylene, 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxeamphetamine (MDA), 3,4-methylenedioxy- N-ethylamphetamine (MDEA), para-methoxyamphetamine (PMA), para-methoxy- N-methylamphetamine (PMMA), amphetamine (AMP), methamphetamine (METH), tetrahydrocannabinol (THC) and cannabidiol (CBD). The developed FD showed impressive sensitivity. The instrumental detection limit was 0.5 µg/L for MDMA. It also showed broad linearity, up to 50 mg/L for MDMA. The noise CV% was 1.1% for an empty capillary and 0.6% for a capillary filled with acetonitrile. The portable CE-FD with developed electrophoretic methodologies was successfully utilized for the determination of illegal abuse of drugs during "Weekend" 2016 and 2017 Music Festivals (Estonia). Moreover, CE-FD can be employed for detection of other natively fluorescing compounds in the proposed range (e.g., for different phenolic compounds, BTEX, naphthalene derivatives, and others), significantly widening the applicability of developed CE-FD instrument.

Development and comparison of HPLC and MEKC methods for the analysis of cyclic sulfur mustard degradation products.

In this study, novel, fast, and simple methods based on RP-HPLC and MEKC with DAD are developed and validated for the qualitative and quantitative determination of five cyclic sulfur mustard (HD) degradation products (1,4-thioxane, 1,3-dithiolane, 1,4-dithiane, 1,2,5-trithiepane, and 1,4,5-oxadithiepane) in water samples. The HPLC method employs a C18 column and an isocratic water-ACN (55:45, v/v) mobile phase. This method enables separation of all five cyclic compounds within 8 min. With the CE method, the baseline separation of five compounds was achieved in less than 11 min by applying a simple BGE composed of a 10 mM borate buffer and 90 mM SDS (pH 9.15). Both methods showed good linear correlation (R2 > 0.9904). The detection limits were in the range of 0.08-0.1 µM for the HPLC method and 10-20 µM for MEKC. The precision tests resulted in RSDs for migration times and peak areas less than 0.9 and 5.5%, respectively, for the HPLC method, and less than 1.1 and 7.7% for the MEKC method, respectively. The developed methods were successfully applied to the analysis of five cyclic HD degradation products in water samples. With the HPLC method, the LODs were lowered using the SPE for sample purification and concentration.

An optimized capillary electrophoresis method for the simultaneous analysis of biomass degradation products in ionic liquid containing samples.

An indirect capillary electrophoresis method for a quantitative determination of mono-, di- and oligosaccharides was developed to investigate biomass degradation, the isomerization of glucose into fructose and conversion of fructose to 5-hydroxymethylfurfural (5-HMF) in ionic liquids (ILs). Three chromophores, namely 2,6-pyridinedicarboxylic acid (PDC), maleic acid and phthalic acid, were used to perform indirect detection. The electroosmotic flow (EOF) was reversed to reduce analysis time, using 1-tetradecyl-3-methylimidazolium chloride (C14MImCl). The simultaneous separation of the underivatized mono-, di- and oligosaccharides was performed using four cellodextrin oligomers (cellotriose, cellotetraose, cellopentaose, cellohexaose), eight carbohydrates (xylose, fructose, glucose, galactose, lactose, cellobiose, raffinose, sucrose), two organic acids (acetic acid, levulinic acid) and 5-HMF. The best performance was obtained using background electrolyte (BGE) composed of 138.2mM NaOH, 40mM maleic acid and 5mMC14MImCl, the applied voltage was -21.7kV. The linear ranges for analyzed compounds were following: organic acids, raffinose and sucrose from 0.20 to 7mM, cellodextrin oligomers from 0.25 to 5mM, other analyzed carbohydrates from 0.25 to 7mM and 5-HMF from 0.05 to 7mM. The relative standard deviations (RSD) of peak areas varied from 3.47 to 9.62% during a 5-day analysis period and 0.58-5.29% during one day.

Digital microfluidics platform for interfacing solid-liquid extraction column with portable capillary electropherograph for analysis of soil amino acids.

In this work, the concept of a field-portable analyzer is proposed that operates with milliliter amounts of solvents and samples. The need to develop such an analyzer is not only driven by specific extraterrestrial analysis but also, for example, by forensics applications where the amount of liquid that can be taken to the field is severely limited. The prototype of the proposed analyzer consists of a solid-liquid extractor, the output of which is connected to the micropump, which delivers droplets of extracts to digital microfluidic platform (DMFP). In this way, world-to-chip interfacing is established. Further, the sample droplets are transported to CE capillary inlet port, separated and detected via a contactless conductivity detector. Working buffers and other solvents needed to perform CE analysis are also delivered as droplets to the DMFP and transported through the CE capillary. The performance of the analyzer is demonstrated by analysis of amino acids in sand matrices. The recovery of the spiked amino acids from the inert sand sample was from 34 to 51% with analysis LOD from 0.2 to 0.6 ppm and migration time RSD from 0.2 to 6.0%.

Determination of γ-hydroxybutyric acid in saliva by capillary electrophoresis coupled with contactless conductivity and indirect UV absorbance detectors.

The aim of the current study was to optimise and validate the methodology for determination of γ-hydroxybutyric acid (GHB) in saliva by CE combined with a contactless conductivity detector (C(4)D) and indirect UV absorbance detection (λ(ABS) = 210 nm). The optimized BGE, consisting of 8.5 mM maleic acid, 17 mM arginine, 255 µM cetyltrimethylammonium bromide (CTAB), and 15% acetonitrile, was evaluated for the separation of GHB in saliva within 6 min. The performance characteristics of the CE-C(4)D-indirect UV methodology was validated. The instrument detection and quantification limits were 0.49 and 1.6 mg/L for C(4)D, and 5.1 mg/L and 17.0 mg/L for indirect UV, respectively. The linearity was obtained over the range from 2.5 to 400 mg/L for C(4)D and from 12.5 to 400 mg/L for indirect UV. The interday precisions were within 2.3-5.7% and intraday precisions were within 1.6-9.0% for C(4)D as well as 2.1-9.3%, 5.6-10.1% for indirect UV in spiked saliva, respectively. The recoveries were within 87.2-104.4%. The matrix effects were +53.2% for small concentrations up to 25 mg/L for C(4)D and +23.6% for concentrations up to 75 for mg/L for indirect UV detection. No matrix effects were observed for higher concentration levels. In conclusion, CE-C4D-indirect UV can offer a rapid, accurate, sensitive, and definitive method for the determination of GHB abuse in saliva samples as a forensic screening tool.

Investigation of the surfactant type and concentration effect on the retention factors of glutathione and its analogues by micellar electrokinetic chromatography.

In the present study, a micellar electrokinetic chromatographic method was used to determine the retention factors of hydrophilic monomeric and homodimeric forms of glutathione analogues. Ionic-liquid-based surfactant, 1-tetradecyl-3-methylimidazolium chloride, as well as cetyltrimethylammonium bromide and phosphate buffer (pH 7.4) were employed in the experiments. Since the studied peptides possess a negative charge under physiological conditions, it is expected that the peptides interact with the oppositely charged 1-tetradecyl-3-methylimidazolium chloride and cetyltrimethylammonium bromide micelles via hydrophobically assisted electrostatic forces. The dependence of the retention factor on the micellar concentration of 1-tetradecyl-3-methylimidazolium chloride and cetyltrimethylammonium bromide is nonlinear and the obtained curves converge to a limiting value. The retention factor values of GSH analogues were in the range of 0.36-2.22 for glutathione analogues and -1.21 to 0.37 for glutathione when 1-tetradecyl-3-methylimidazolium chloride was used. When cetyltrimethylammonium bromide was employed, the retention factor values were in the range of 0.27-2.17 for glutathione analogues and -1.22 to 0.06 for glutathione. If sodium dodecyl sulfate was used, the retention factor values of glutathione analogues with carnosine moiety were in the range of -1.54 to 0.38.

Fluorescence, electrophoretic and chromatographic fingerprints of herbal medicines and their comparative chemometric analysis.

The aim of the present study was to compare the polyphenolic compositions of 47 medicinal herbs (HM) and four herbal tea mixtures from Central Estonia by rapid, reliable and sensitive Spectral Fluorescence Signature (SFS) method in a front face mode. The SFS method was validated for the main identified HM representatives including detection limits (0.037mgL(-1) for catechin, 0.052mgL(-1) for protocatechuic acid, 0.136mgL(-1) for chlorogenic acid, 0.058mgL(-1) for syringic acid and 0.256mgL(-1) for ferulic acid), linearity (up to 5.0-15mgL(-1)), intra-day precision (RSDs=6.6-10.6%), inter-day precision (RSDs=6.4-13.8%), matrix effect (-15.8 to +5.5) and recovery (85-107%). The phytochemical fingerprints were differentiated by parallel factor analysis (PARAFAC) combined with hierarchical cluster analysis (CA) and principal component analysis (PCA). HM were clustered into four main clusters (catechin-like, hydroxycinnamic acid-like, dihydrobenzoic acid-like derivatives containing HM and HM with low/very low content of fluorescent constituents) and 14 subclusters (rich, medium, low/very low contents). The average accuracy and precision of CA for validation HM set were 97.4% (within 85.2-100%) and 89.6%, (within 66.7-100%), respectively. PARAFAC-PCA/CA has improved the analysis of HM by the SFS method. The results were verified by two separation methods CE-DAD and HPLC-DAD-MS also combined with PARAFAC-PCA/CA. The SFS-PARAFAC-PCA/CA method has potential as a rapid and reliable tool for investigating the fingerprints and predicting the composition of HM or evaluating the quality and authenticity of different standardised formulas. Moreover, SFS-PARAFAC-PCA/CA can be implemented as a laboratory and/or an onsite method.

Development of a capillary electrophoresis method with direct UV detection for the analysis of thiodiglycol and its oxidation products.

A novel method based on CE with precolumn derivatization and direct UV detection for the determination of thiodiglycol (TDG), TDG sulfoxide, and TDG sulfone in water samples was developed. The lack of a UV chromophore of target analytes was overcome by derivatization with phthalic anhydride. The reactant concentrations, as well as the derivatization dependence on heating temperature and time, were carefully investigated. The baseline separation of three derivatives was achieved in less than 8 min by applying a simple BGE composed of a 30 mM borate buffer at pH 8.5. Several parameters affecting the separation efficiency (buffer pH and concentration, capillary temperature, and applied voltage) were evaluated. Calibration curves of all compounds showed good linear correlations (R(2) > 0.9994). The LODs of the TDG and its oxidation products were in the range of 98-154 ng/mL. The precision tests resulted in RSDs for migration times and peak areas of less than 1.2 and 3.6%, respectively. The developed method was successfully applied for the analysis of TDG and oxidation products in seawater, utilizing the carbon aerogel-based adsorbents for sample purification and concentration. Additionally, the method has the potential to be transformed into a portable CE format.

Aggregation of phosphate and 1-tetradecyl-3-methylimidazolium chloride background electrolytes during micellar electrokinetic chromatography.

We report the possible aggregation of phosphate and ionic liquid (1-tetradecyl-3-methylimidazolium chloride) based BGEs during MEKC. After a certain transit period, the aggregates appear as a random sequence of spikes on a UV detector signal. Root mean square values of the spikes and aggregation time (Ta ) were plotted against BGE concentrations. The observation suggests that MEKC is a simple and easy technique for micelle aggregation studies.

Determination of metal content in superoxide dismutase enzymes by capillary electrophoresis†.

Superoxide dismutases are antioxidant scavenger enzymes that contain a metal cofactor (copper, zinc, iron, and manganese) in their active site. Metal content measurement is one of the essential steps to characterize enzyme biological activity. We have developed a capillary electrophoretic protocol for the determination of the metal content in superoxide dismutase enzymes. The background electrolyte containing 10 mM pyridine-2,6-dicarboxylic acid and 1 mM 1-methyl-3-tetradecylimidazolium chloride at pH 3.8 was optimized for on-column complexation of the above-mentioned metals. The minimum detectable levels of metals ranged from 0.3 to 1.2 µg/mL. The reliability of the method was checked by parallel quantitative determination of the metal content in superoxide dismutase enzymes by graphite furnace or flame atomic absorption spectrophotometry methods.

Capacitance-to-digital: a single chip detector for capillary electrophoresis.

A capacitance-to-digital converter integrated circuit was implemented in an automated CE device as a single chip detector. In this paper, design and hardware issues related to the fabrication and application of a miniature detector for contactless measurement of complex impedance are discussed. The capacitance-to-digital converter integrated circuit was used as the whole detector. The advantage of this setup is that the single integrated circuit provides digital data and neither additional signal conditioning nor analog-to-digital converter is required. Different separation conditions were used to evaluate the detection characteristics of the constructed detection unit. A 1 µM LOD for sodium and a 1.6 µM LOD for potassium ions were revealed for the detector. The detection system designed is competitive with miniaturized contactless conductivity detectors or UV absorbance detectors with respect to overall parameters (sensitivity, resolution, power consumption properties, and size). The obtained separation and detection results show that such detection technique can be used as an extremely low power consuming and space saving solution for CE detection with potential applications in environmental monitoring, process control, and various analytical measurements.