Environmental and economic performance evaluation of municipal wastewater treatment plants in India: a life cycle approach.

Life cycle assessment (LCA) was used to evaluate the environmental impacts associated with wastewater treatment plants (WWTPs). Moreover, an economic evaluation was also addressed using life cycle cost (LCC) approach. Emissions associated with electricity production for operating the WWTPs, emissions from the treated effluent and hazardous heavy metals emissions have been identified as the main contributors to the overall environmental impact. Among the WWTPs considered, soil biotechnology (SBT) obtained the lowest environmental impact in all the evaluated impact categories, except for eutrophication potential. While the aerated lagoons (AL) system presented the worst results due to the high electricity and chemicals consumption. Moreover, the results obtained from the evaluation of benefit from treated effluent reuse clearly indicate that there is a drop in the toxicity potential when the rate of effluent reuse is increased. On the other hand, the present worth of SBT was estimated to be Rs. 40 million/millions of litres per day (MLD) which is the highest as compared to other technologies. Membrane bioreactor (MBR) is the second highest (Rs. 24.7 million/MLD), which is mainly contributed by civil, electro-mechanical and membrane cost. The results of LCA and LCC provide specific insights about the factors which play a major role during the life cycle of wastewater treatment technology and its associated impacts.

Performance evaluation of a decentralized wastewater treatment system in India.

A Decentralized Wastewater Treatment System (DEWATS) provides an economically feasible and efficient wastewater treatment solution especially in developing countries. It has an enormous potential for developing a sustainable environmental sanitation system. In this study, the treatment efficiency of eight DEWATS plants was evaluated in the state of Maharashtra, India, for their performance in terms of selected physico-chemical parameters of the wastewater. Although the efficiency of some of the plants was lower than that reported in literature, the effluent quality of all the plants was within the permissible discharge limits of the Central Pollution Control Board for all the parameters. Comprehensive assessment of Plant I was carried in terms of its technical and socio-economic aspects. Moreover, LCA tool has been utilized to evaluate the environmental impacts of the operation stage of DEWATS. The midpoint, CML 2001 (April 2015) methodology was adopted, in which 11 impact categories were considered. From the life cycle impact assessment and interpretation, the main impacts are identified as releases of COD, P-PO43-, and N-NH4+ to water bodies and disposal of sludge. Due to negligible energy consumption, the operation stage was found to be less damaging to the environment. It was concluded that DEWATS can be a good alternative for treating wastewater with negligible energy and chemical consumption.

Technical, hygiene, economic, and life cycle assessment of full-scale moving bed biofilm reactors for wastewater treatment in India.

Moving bed biofilm reactor (MBBR) is a highly effective biological treatment process applied to treat both urban and industrial wastewaters in developing countries. The present study investigated the technical performance of ten full-scale MBBR systems located across India. The biochemical oxygen demand, chemical oxygen demand, total suspended solid, pathogens, and nutrient removal efficiencies were low as compared to the values claimed in literature. Plant 1 was considered for evaluation of environmental impacts using life cycle assessment approach. CML 2 baseline 2000 methodology was adopted, in which 11 impact categories were considered. The life cycle impact assessment results revealed that the main environmental hot spot of this system was energy consumption. Additionally, two scenarios were compared: scenario 1 (direct discharge of treated effluent, i.e., no reuse) and scenario 2 (effluent reuse and tap water replacement). The results showed that scenario 2 significantly reduce the environmental impact in all the categories ultimately decreasing the environmental burden. Moreover, significant economic and environmental benefits can be obtained in scenario 2 by replacing the freshwater demand for non-potable uses. To enhance the performance of wastewater treatment plant (WWTP), there is a need to optimize energy consumption and increase wastewater collection efficiency to maximize the operating capacity of plant and minimize overall environmental footprint. It was concluded that MBBR can be a good alternative for upgrading and optimizing existing municipal wastewater treatment plants with appropriate tertiary treatment. Graphical abstract ᅟ.

A soil biotechnology system for wastewater treatment: technical, hygiene, environmental LCA and economic aspects.

Soil biotechnology (SBT) is a green engineering approach for wastewater treatment and recycling. Five SBT units located in the Mumbai region were under consideration of which holistic assessment of two SBT plants was carried out considering its technical, environmental and economic aspects and was compared with published research of other three. LCA has been done to evaluate the environmental impacts of construction and operation phase of SBT. Chemical oxygen demand (COD) and biochemical oxygen demand (BOD) removal of more than 90% can be achieved using this technology. Also, the nutrient removal proficiency (nitrate, nitrite, ammoniacal nitrogen, TKN, total nitrogen and phosphates) of this technique is good. On the other hand, SBT has low annual operation and maintenance cost, comparable to land-based systems and lower than conventional or advanced technologies. From the life cycle impact assessment, the main contributors for overall impact from the plant were identified as electricity consumption, discharges of COD, P-PO43- and N-NH4+ and disposal of sludge. The construction phase was found to have significantly more impact than the operation phase of the plant. This study suggests plant I is not relatively as efficient enough regarding sanitation. SBT provides several benefits over other conventional technologies for wastewater treatment. It is based on a bio-conversion process and is practically maintenance free. It does not produce any odorous bio-sludge and consumes the least energy.