Construction of Ultrathin Layer-by-Layer Films of Oligothiophene Derivatives on an Electrode.

Oligothiophene derivatives, which are known as p-type materials, have been synthesized, and their ultrathin layer-by-layer films have been constructed on an electrode using a simple and convenient dipping method. The stepwise deposition behavior of quaterthiophene and sexithiophene derivatives on the electrode via hydrogen bonding was monitored by electronic spectra measurement, and the constructed films were evaluated by X-ray photoelectron spectroscopy, grazing-incidence small-angle X-ray scattering, and cyclic voltammetry. It has been clarified that the constructed layer-by-layer films were electroactive and photoelectroactive.

Ion transportation by Prussian blue nanoparticles embedded in a giant liposome.

A new type of artificial giant liposome incorporating ion transport channels and using nanoparticles of metal organic frameworks was demonstrated. The micropores of Prussian blue nanoparticles served as ion transport channels between the outer and inner phases of liposomes.

Preparation of Hierarchically Assembled Silver Nanostructures based on the Morphologies of Crystalline Peptide-Silver(I) Complexes.

The preparation of a hierarchically assembled Ag nanostructures based on a nanocrystalline assembly was demonstrated using an Ag(I) complex of a dipeptide (AspDap). By heating under N2 gas, a spherical assembly of a nanocrystalline dipeptide-Ag(I) complex (diameter 4-5 µm), which has a morphology similar to the assembled structure of the dipeptide, was transformed to an assembly of Ag nanostructures, where the micrometre-order crystalline morphology was maintained. In addition, detailed scanning electron microscopy studies revealed that Ag nanoparticles (diameter ca. 10 nm) were formed on the surface of the Ag nanostructure. When the Ag(I) ions were reduced to Ag(0), this phenomenon exhibited surface dependence due to the anisotropic two-dimensional Ag(I) arrangement in the crystals. Thermogravimetric measurements and X-ray photoelectron spectroscopy revealed that the reduction proceeds in a stepwise manner around 200-250 °C, together with the removal of primary and secondary carboxylic groups in the dipeptide. Comparison with the heating process of the crystalline Ag(I) complex of ß-alanine indicated that stepwise reduction is key for maintaining the original micrometre-order morphology.

Solvent-free synthesis of monodisperse Cu nanoparticles by thermal decomposition of an oleylamine-coordinated Cu oxalate complex.

Cu nanoparticles (NPs) are widely used in numerous applications because of their unique optical, catalytic, and electrical properties. However, the synthesis of monodisperse Cu NPs often involves harmful reducing agents under an inert atmosphere in a solution with low Cu ion concentrations. In this study, monodisperse Cu NPs were synthesized by the thermal decomposition of an oleylamine-coordinated Cu oxalate (Cu(ox)) complex (OA-Cu(ox)) in oleylamine in air with no reducing agent. The structure of OA-Cu(ox) was analyzed using Fourier-transform infrared spectroscopy. The decomposition temperature of the oxalate ion was reduced to 130 °C from that of Cu(ox) (300 °C) because of the coordination of the primary amino group of oleylamine with the Cu ion of Cu(ox). Furthermore, the decomposition temperature of OA-Cu(ox) strongly affected the size distribution of the synthesized Cu NPs. Monodisperse Cu NPs were successfully synthesized by the thermal decomposition of OA-Cu(ox) at temperatures higher than 240 °C with high yield (∼90%). The synthesized Cu NPs were readily dispersed in toluene.

Wisely Designed Phthalocyanine Derivative for Convenient Molecular Fabrication on a Substrate.

An axial-substituted silicon phthalocyanine derivative, SiPc(OR)2 (R = C4H9), that is soluble in organic solvent is conveniently synthesized. This silicon phthalocyanine derivative reacts with a hydroxyl group on a substrate and then with another phthalocyanine derivative under mild conditions. The accumulation number of the phthalocyanine molecules on the substrates is easily controlled by the immersion time. On the basis of AFM (atomic force microscopy) images, the surface of the phthalocyanine-modified glass substrate has uneven structures on the nanometer scale. ITO electrodes modified with the composition of the phthalocyanine derivative and PCBM show stable cathodic photocurrent generation upon light irradiation.

N,N-Diethyl-diaminopropane-copper(ii) oxalate self-reducible complex for the solution-based synthesis of copper nanocrystals.

Metal oxalates (C2O42-, ox) have been explored as promising precursors for the direct transformation of their oxalate moieties into metallic or metal oxide crystals via thermal decomposition without the formation of any byproducts due to releasing CO2 gas. The copper(ii) oxalate (Cu(ox)) crystal is a coordination polymer composed of an infinite coordination network with a thermal decomposition temperature around 300 °C; however, their insoluble nature in any solvents and relatively high decomposition temperature do not allow the solution-based syntheses of surface-modified metallic Cu nanocrystals (NCs) in the presence of various surfactants such as long-chain alkylamines and alkylcarboxylates which have been used for increasing the dispersibility of NCs in organic solvents. In this study, the insoluble nature of Cu(ox) is overcome by mixing Cu(ox) crystals and N,N-diethyl-1,3-diaminopropane (dedap) to form a discrete complex, [Cu(ox)(dedap)2], whose structure is determined by X-ray crystallographic analysis. The obtained complex is well soluble in polar solvents and miscible with surfactants. Furthermore, it is decomposed at a moderate temperature of <170 °C with the evolution of CO2 gas; as a result, Cu NCs dispersible in organic solvents have been synthesized in suitable surfactants, such as the mixture of oleic acid, dodecylamine, and octylamine utilized as a reaction solvent. In addition, their potential application of the surface-modified Cu NCs as a conductive-ink has been preliminarily tested. The Cu film sintered at 280 °C exhibits a resistivity of 40 µΩ cm.

Grain-Boundary-Free Super-Proton Conduction of a Solution-Processed Prussian-Blue Nanoparticle Film.

A porous crystal family has been explored as alternatives of Nafion films exhibiting super-proton conductivities of ≥10-2  S cm-1 . Here, the proton-conduction natures of a solution-processed film of nanoparticles (NPs) have been studied and compared to those of a Nafion film. A mono-particle film of Prussian-blue NPs is spontaneously formed on a self-assembled monolayer substrate by a one-step solution process. A low-temperature heating process of the densely packed, pinhole-free mono-particle NP film enables a maximum 105 -fold enhancement of proton conductivity, reaching ca. 10-1  S cm-1 . The apparent highest conductivity, compared to previously reported data of the porous crystal family, remains constant against humidity changes by an improved water-retention ability of the film. In our proposed mechanism, the high-performing solution-processed NP film suggests that heating leads to the self-restoration of hydrogen-bonding networks throughout their innumerable grain boundaries.

Stepwise fabrication of donor/acceptor thin films with a charge-transfer molecular wire motif.

Novel thin films composed of a donor (D)/acceptor (A) charge-transfer chain compound were fabricated by a layer-by-layer technique using complexation of a paddlewheel-type diruthenium(ii, ii) complex with an N,N'-dicyanoquinonediimine derivative on an ITO substrate with a pyridine-substituted phosphonate anchor. The stepwise growth of an electron-transfer D+A--chain thin film was confirmed.

Photoresponsive Molecular Memory Films Composed of Sequentially Assembled Heterolayers Containing Ruthenium Complexes.

Photoresponsive molecular memory films were fabricated by a layer-by-layer (LbL) assembling of two dinuclear Ru complexes with tetrapodal phosphonate anchors, containing either 2,3,5,6-tetra(2-pyridyl)pyrazine or 1,2,4,5-tetra(2-pyridyl)benzene as a bridging ligand (Ru-NP and Ru-CP, respectively), using zirconium phosphonate to link the layers. Various types of multilayer homo- and heterostructures were constructed. In the multilayer heterofilms such as ITO||(Ru-NP)m |(Ru-CP)n , the difference in redox potentials between Ru-NP and Ru-CP layers was approximately 0.7 V, which induced a potential gradient determined by the sequence of the layers. In the ITO||(Ru-NP)m |(Ru-CP)n multilayer heterofilms, the direct electron transfer (ET) from the outer Ru-CP layers to the ITO were observed to be blocked for m>2, and charge trapping in the outer Ru-CP layers became evident from the appearance of an intervalence charge transfer (IVCT) band at 1140 nm from the formation of the mixed-valent state of Ru-CP units, resulting from the reductive ET mediation of the inner Ru-NP layers. Therefore, the charging/discharging ("1"and "0") states in the outer Ru-CP layers could be addressed and interconverted by applying potential pulses between -0.5 and +0.7 V. The two states could be read out by the direction of the photocurrent (anodic or cathodic). The molecular heterolayer films thus represent a typical example of a photoresponsive memory device; that is, the writing process may be achieved by the applied potential (-0.5 or +0.7 V), while the readout process is achieved by measuring the direction of the photocurrent (anodic or cathodic). Sequence-sensitive multilayer heterofilms, using redox-active complexes as building blocks, thus demonstrate great potential for the design of molecular functional devices.

Observation of an Orientation Change in Highly Oriented Layer-by-Layer Films of a Ruthenium Complex upon Oxidation Reaction.

Layer-by-layer films composed of redox-active ruthenium dimer and Zr(IV) ions were fabricated on an indium tin oxide electrode. The fabricating behavior was monitored by cyclic voltammetry and UV-vis absorption spectral measurements. The orientation of the film was also monitored by grazing-incidence small-angle and wide-angle X-ray scattering (GISAXS) measurements, and it has been clarified that this film has a crystalline structure. The peaks obtained by GISAXS were changed upon oxidation reaction, which indicates that a change in the orientation of the ruthenium dimer occurred in the film.

Potential Tuning of Nanoarchitectures Based on Phthalocyanine Nanopillars: Construction of Effective Photocurrent Generation Systems.

Nanopillars composed of a photoresponsive phthalocyanine derivative have been conveniently fabricated using a continuous silane coupling reaction on a substrate. The chemical potentials of phthalocyanine nanopillars (PNs) are precisely controlled by changing the number of phthalocyanine derivatives on the substrate. In addition, photocurrent generation efficiencies have been strongly influenced by the number of phthalocyanine derivatives. High photocurrent conversion cells in a solid state have been obtained by the combination of PNs and a fullerene derivative.

Construction of hybrid films of silver nanoparticles and polypyridine ruthenium complexes on substrates.

Hybrid films of functional molecules and metal nanoparticles have been considered to be novel photo-functional devices. Here we have successfully constructed hybrid films of silver nanoparticles and ruthenium polypyridine derivatives on substrates. In order to hybridise them on a surface, a self-assembled monolayer method via chemical bond formation and electro-reductive polymerisation (thick layers) via physical attachment have been employed. These methods have the advantage of convenient and reproducible fabrication of complicated hybrid films. Furthermore, it has been clarified that these hybrid films show unique photo-functional behaviours, such as enhanced photocurrent generation.

Plasmon-assisted photocurrent generation from silver nanoparticle monolayers combined with porphyrins via their different chain-length alkylcarboxylates.

Three-typed porphyrin derivatives with a different chain-length alkylcarboxylic acid as their peripheral anchor group have been prepared. Anodic photocurrents were observed in a simple system where the porphyrin derivatives were directly anchored on an indium tin oxide (ITO) electrode. Cathodic photocurrents and their plasmon-assisted enhancement appeared from an Ag nanoparticle (Ag NP) composite monolayer combined with the porphyrin derivatives on the ITO electrode. In the photocurrent generation mechanism, Ag NPs played both the roles as photon- and energy-transfer to the porphyrin derivatives. The plasmon-assisted enhancement was affected by the chain-lengths of the peripheral anchor groups.

Synthesis of water-dispersible silver nanoparticles by thermal decomposition of water-soluble silver oxalate precursors.

Silver oxalate, one of the coordination polymer crystals, is a promising synthetic precursor for transformation into Ag nanoparticles without any reducing chemicals via thermal decomposition of the oxalate ions. However, its insoluble nature in solvents has been a great disadvantage, especially for systematic control of crystal growth of the Ag nanoparticles, while such control of inorganic nanoparticles has been generally performed using soluble precursors in homogeneous solutions. In this paper, we document our discovery of water-soluble species from the reaction between the insoluble silver oxalate and N,N-dimethyl-1,3-diaminopropane. The water-soluble species underwent low-temperature thermal decomposition of the oxalate ions at 30 °C with evolution of CO2 to reduce Ag+ to Ag0. Water-dispersible Ag nanoparticles have been successfully synthesized from the water-soluble species in the presence of gelatin via similar thermal decomposition at 100 °C. The gelatin-protected and water-dispersible Ag nanoparticles with a mean diameter of 25.1 nm appeared. In addition, antibacterial activity of the prepared water-dispersible Ag nanoparticles has been preliminarily investigated.

Molecular nanostamp based on one-dimensional porphyrin polymers.

Surface design with unique functional molecules by a convenient one-pot treatment is an attractive project for the creation of smart molecular devices. We have employed a silane coupling reaction of porphyrin derivatives that form one-dimensional polymer wires on substrates. Our simple one-pot treatment of a substrate with porphyrin has successfully achieved the construction of nanoscale bamboo shoot structures. The nanoscale bamboo shoots on the substrates were characterized by atomic force microscopy (AFM), UV-vis spectra, and X-ray diffraction (XRD) measurements. The uneven and rigid nanoscale structure has been used as a stamp for constructing bamboo shoot structures of fullerene.

Photoresponse enhancement by mixing of an alcohol-soluble C60 derivative into a ruthenium complex monolayer.

We have investigated the effect of mixing an alcohol-soluble C60 derivative into a self-assembled monolayer (SAM), which consisted of a redox-active Ru-complex with multipoint anchoring groups, on an indium tin oxide surface. Angle-resolved X-ray photoelectron spectroscopy of the mixed SAM revealed that the C60 derivative was well incorporated into the redox-active Ru-complex SAM. In addition, some of the C60 derivatives were present on the mixed SAM surface. In the presence of a sacrificial reagent, the action spectra of the mixed molecular layer exhibited a broad spectral response due to the presence of the C60 derivative, whereas a sharp response was observed for the monocomponent Ru-complex SAM. We propose that an efficient charge separation arising from the combination of the C60 derivative and the Ru-complex enhanced the spectral response of the mixed SAM.

Long-range electron transport of ruthenium-centered multilayer films via a stepping-stone mechanism.

We studied electron transport of Ru complex multilayer films, whose structure resembles redox-active complex films known in the literature to have long-range electron transport abilities. Hydrogen bond formation in terms of pH control was used to induce spontaneous growth of a Ru complex multilayer. We made a cross-check between electrochemical measurements and I-V measurements using PEDOT:PSS to eliminate the risk of pinhole contributions to the mechanism and have found small ß values of 0.012-0.021 Å(-1). Our Ru complex layers exhibit long-range electron transport but with low conductance. On the basis of the results of our theoretical-experimental collaboration, we propose a modified tunneling mechanism named the "stepping-stone mechanism", where the alignment of site potentials forms a narrow band around E(F), making resonant tunneling possible. Our observations may support Tuccito et al.'s proposed mechanism.

Glycine crystallization in solution by CW laser-induced microbubble on gold thin film surface.

We have developed a novel laser-induced crystallization method utilizing local heat-induced bubble/water interface. Continuous laser beam of 1064 nm is focused on a gold nanoparticles thin film surface covered with glycine supersaturated aqueous solution. Light absorption of the film due to localized plasmon resonance caused local heating at the focal position and produced a single thermal vapor microbubble, which generated thermal gradient followed by convection flow around the bubble and eventually induced glycine crystallization and growth. The crystallization mechanism is discussed by considering gathering and accumulating molecules around the bubble/water interface assisted by convection flow and temperature jump.

Fabrication and placement of a ring structure of nanoparticles by a laser-induced micronanobubble on a gold surface.

We have developed a new fabrication method for a ring structure of assembled nanoparticles on a gold surface by the use of continuous Nd:YAG laser light. A micronanobubble on a gold surface, created by laser local heating, acts as a template for the formation of the ring structure. Both Marangoni convection flow and capillary flow around the micronanobubble are responsible for the driving force to assemble nanoparticles such as CdSe Q-dots into the ring structure from the solution. Because a single micronanobubble was generated by the Nd:YAG laser focusing point, the precise positioning of the ring structure was feasible directly on the gold surface, which makes it possible to fabricate various patterns of rings such as arrays and letters and even a double-ring structure without any photomasks or any templates.