RESUMEN
The controversy surrounding whether serum total cholesterol is a risk factor for the graded progression of knee osteoarthritis (KOA) has prompted this study to develop an authentic prediction model using a machine learning (ML) algorithm. The objective was to investigate whether serum total cholesterol plays a significant role in the progression of KOA. This cross-sectional study utilized data from the public database DRYAD. LASSO regression was employed to identify risk factors associated with the graded progression of KOA. Additionally, six ML algorithms were utilized in conjunction with clinical features and relevant variables to construct a prediction model. The significance and ranking of variables were carefully analyzed. The variables incorporated in the model include JBS3, Diabetes, Hypertension, HDL, TC, BMI, SES, and AGE. Serum total cholesterol emerged as a significant risk factor for the graded progression of KOA in all six ML algorithms used for importance ranking. XGBoost algorithm was based on the combined best performance of the training and validation sets. The ML algorithm enables predictive modeling of risk factors for the progression of the KOA K-L classification and confirms that serum total cholesterol is an important risk factor for the progression of KOA.
Asunto(s)
Colesterol , Progresión de la Enfermedad , Aprendizaje Automático , Osteoartritis de la Rodilla , Humanos , Colesterol/sangre , Osteoartritis de la Rodilla/sangre , Masculino , Femenino , Factores de Riesgo , Persona de Mediana Edad , Estudios Transversales , Anciano , AlgoritmosRESUMEN
RATIONALE: Streptococcus gordonii is a rare cause of finger suppurative infection. Very few cases have been reported of its treatment. PATIENT CONCERNS: A 68-year-old male of severe finger infection. Bacterial culture of synovial fluid revealed S gordonii.According to the patient's history and auxiliary examination, the patient was diagnosed with S gordonii infection. Here, we review the diagnosis and treatment of this patient and describe the clinical and epidemiological characteristics of the patient. DIAGNOSES: Streptococcus gordonii finger infection.Interventions: In the case of ineffective oral antibiotics, this patient chose to pursue an abscess incision, but in the course of treatment,the flexor digitorum tendon dissolved and eventually ruptured. OUTCOMES: The infection was controlled after intravenous injection of vancomycin. The incision was sutured 2 weeks later. No recurrence of infection was found after 3 months of follow-up. LESSONS: The treatment included antibacterial and abscess treatments. In the absence of drug sensitivity results, antibiotics can be used empirically. If empirical anti-microbial treatment fails, the antibiotic regimen should be changed in a timely manner, Vancomycin may be an antibiotic choice.
Asunto(s)
Absceso , Streptococcus gordonii , Masculino , Humanos , Anciano , Absceso/microbiología , Vancomicina/uso terapéutico , Vancomicina/farmacología , Antibacterianos/uso terapéutico , Antibacterianos/farmacologíaRESUMEN
Micro-milling is a precision manufacturing process with broad applications across the biomedical, electronics, aerospace, and aeronautical industries owing to its versatility, capability, economy, and efficiency in a wide range of materials. In particular, the micro-milling process is highly suitable for very precise and accurate machining of mold prototypes with high aspect ratios in the microdomain, as well as for rapid micro-texturing and micro-patterning, which will have great importance in the near future in bio-implant manufacturing. This is particularly true for machining of typical difficult-to-machine materials commonly found in both the mold and orthopedic implant industries. However, inherent physical process constraints of machining arise as macro-milling is scaled down to the microdomain. This leads to some physical phenomena during micro-milling such as chip formation, size effect, and process instabilities. These dynamic physical process phenomena are introduced and discussed in detail. It is important to remember that these phenomena have multifactor effects during micro-milling, which must be taken into consideration to maximize the performance of the process. The most recent research on the micro-milling process inputs is discussed in detail from a process output perspective to determine how the process as a whole can be improved. Additionally, newly developed processes that combine conventional micro-milling with other technologies, which have great prospects in reducing the issues related to the physical process phenomena, are also introduced. Finally, the major applications of this versatile precision machining process are discussed with important insights into how the application range may be further broadened.
RESUMEN
PURPOSE: To observe the morphology of the transverse geniculate ligament of the knee (TGL) by magnetic resonance imaging (MRI) and to analyze the cause of the pseudotear sign of the anterior horn of the meniscus caused by the TGL. METHODS: Patients who underwent MRI examination of the knee joint in the orthopaedics department of our hospital from July 2016 to August 2019 were identified. The occurrence rate, length, width, thickness, cross-sectional shape, pattern, appearance, and position relative to the anterior horn of the lateral and medial meniscus and anatomical variations were observed by multiplane and multisequence MRI. The frequency and cause of the pseudotear sign also were observed. RESULTS: The data of 101 patients were analyzed. Among them, 60 were male, and 41 were female. The average age was 42.01 (18-75) years. The occurrence rate of the TGL was 67.3% (68/101), the average length was 38.75 ± 3.56 mm, the median coronal diameter was 1.79 ± 0.60 mm, the median sagittal diameter was 1.88 ± 0.35 mm, and the cross-sectional morphology was mostly oval and round. There were 5 types of TGL connection to the anterior horn of the medial meniscus: type 1, located at the front edge; type 2, located at the upper front edge; type 3, located at the upper edge; type 4, located at the back upper edge; and type 5, was located at the back edge of the anterior horn of the medial meniscus. There was only one type of TGL insertion into the anterior horn of the lateral meniscus, located at the anterior superior edge of the anterior horn of the lateral meniscus. There were 4 cases of the pseudotear sign in the anterior horn of the meniscus, 3 in the lateral meniscus and 1 in the medial meniscus. The pseudotear sign of the anterior horn of the meniscus caused by the TGL was observed at a rate of 5.88% (4/68). CONCLUSIONS: In MRI examination of the knee, the anterior horn of the meniscus sometimes shows a pseudotear sign. According to the shape and route of the TGL on MRI and the direction and position of the pseudotear sign of the anterior horn of the meniscus, true and false tears of the anterior horn of the meniscus can be identified. LEVEL OF EVIDENCE: Level III, diagnostic study (retrospective, noncomparative, observational case series without a consistently applied reference "gold" standard).
Asunto(s)
Meniscos Tibiales/patología , Lesiones de Menisco Tibial/patología , Adolescente , Adulto , Anciano , Simulación por Computador , Estudios Transversales , Femenino , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/patología , Ligamentos/patología , Imagen por Resonancia Magnética , Masculino , Meniscos Tibiales/diagnóstico por imagen , Persona de Mediana Edad , Estudios Retrospectivos , Lesiones de Menisco Tibial/diagnóstico por imagen , Adulto JovenRESUMEN
Soft tissue leiomyosarcoma (STLMS) is a major histological subtype of adult sarcoma. Although the molecular mechanisms ofLMS have been gradually revealed, no valid therapeutic targets have been identified. In this study, we performed a systematic screening to explore relapse-associated genes in STLMS, using data from The Cancer Genome Atlas-Sarcoma (TCGA-SARC). Then, we investigated the functional role of the gene with the best relapse-prediction value in STLMS by both in-vitro and in-vivo studies. Results showed that AMH and PLA2G10 were two genes with area under curve (AUC) values higher than 0.80 in ROC analysis when detecting relapse. Patients in the high AMH or PLA2G10 expression group had significantly worse relapse-free survival (RFS) compared to the respective low expression group. PLA2G10 was highly expressed in STLMS, but not in other sarcoma subtypes. PLA2G10 overexpression promoted SK-LMS-1 cell growth and G1/S transition, while PLA2G10 knockdown slowed the growth and resulted in G1 phase arrest. PLA2G10 overexpression markedly increased the expression of CDK2 and cyclin E1, but did not influence CDK4, CDK6, cyclin D1, CDK1 or cyclin A expression. PLA2G10 overexpression enhanced SK-LMS-1 cell-derived xenograft tumor growth in nude mice, while PLA2G10 inhibition slowed the growth. Mutation of two critical catalyzing amino acid residues (p.H88A and p.D89A) abrogated the capability of PLA2G10 to catalyze the production of arachidonic acid (AA), and also canceled the regulatory effects on cyclin E1 and CDK2 expression, as well as G1/S transition. In conclusion, PLA2G10 was a specific relapse-associated gene in STLMS. It facilitated the cell-cycle progression of STLMS cells at least by elevating the expression of cyclin E1 and CDK2. The hydrolytic activity was crucial for its oncogenic properties.
Asunto(s)
Ciclina E/genética , Quinasa 2 Dependiente de la Ciclina/genética , Regulación Neoplásica de la Expresión Génica , Fosfolipasas A2 Grupo X/genética , Leiomiosarcoma/genética , Proteínas Oncogénicas/genética , Animales , Ciclo Celular , Línea Celular Tumoral , Femenino , Humanos , Leiomiosarcoma/patología , Ratones Endogámicos BALB C , Ratones Desnudos , Recurrencia Local de Neoplasia/genética , Recurrencia Local de Neoplasia/patologíaRESUMEN
Despite many treatment options, cancer remains a growing problem and has become the second leading cause of death globally. Here, we present fluorescence molecular tomography (FMT) data regarding the reversion of third generation co-cultured U87+DBTRG and patient-derived GBM tumor model after treatment with novel IL17A inhibitor named FLVM and FLVZ (organic derivatives of caffeic acid). FMT was used to determine tumor angiogenesis volume (assessment of number of blood vessel; the expression of angiogenic factors CD34 and other angiogenic cancer bio-markers) in U87+DBTRG and patient-derived gliomas. Immunohistochemistry was used to determine microvessel density [CD34], and cell proliferation [Ki67]. Western blot was used to assess the interleukin 17A [IL17A], vascular endothelial growth factor [VEGF] and hypoxia-inducible factor-1α [HIF-1α]. Antibody array was used to assess the cancer bio-markers in co-cultured U87+DBTRG gliomas. Animal survival was found to be significantly increased (P<0.0001) after FLVM treatment compared with control-IL17A. After FMT detection, FLVM, administered orally, was found to decrease tumor growth (P<0.0001). FLVM and FLVZ administration resulted in significant decreases in tumor hypoxia [HIF-1α (P<0.05)], angiogenesis [CD34 (P<0.05)], VEGF, IL17A and cell proliferation [Ki67 (P<0.05)] and caused a significant increase of Bax, caspase and FasL (P<0.05), compared with untreated animals. Additionally, Leptin, LPL (P<0.01), FFA (P<0.05) and adipogenesis were downregulated and no additive toxicity was found in mice except calorie-restriction like effect. Use of FLVM can be considered as a novel inhibitor of IL17A for the treatment of human gliomas.