RESUMEN
The O3-type Na[Ni1-x-yCoxMny]O2 cathodes have received significant attention in sodium-ion batteries (SIBs) due to their high energy density. However, challenges such as structural instability and interfacial instability against an electrolyte solution limit their practical use in SIBs. In this study, the single-crystalline O3-type Na[Ni0.6Co0.2Mn0.2]O2 (SC-NCM) cathode has been designed and synthesized to effectively relieve the degradation pathways of the polycrystalline O3-type Na[Ni0.6Co0.2Mn0.2]O2 (PC-NCM) cathode for SIBs. The mechanically robust SC-NCM due to the absence of pores in the particles enhances tolerance to particle cracking, resulting in stable cycling performance with a cycle retention of 73% over 350 cycles. Moreover, the proposed SC-NCM is synthesized using a simple and cost-effective molten-salt synthetic route without the complex quenching process typically associated with PC-NCM synthesis methods, showing good practical applicability. This study will provide an innovative direction for the development of advanced cathode materials for practical SIBs.
RESUMEN
Alloying-type metallic tin is perceived as a potential anode material for K-ion batteries owing to its high theoretical capacity and reasonable working potential. However, pure Sn still face intractable issues of inferior K+ storage capability owing to the mechanical degradation of electrode against large volume changes and formation of intermediary insulating phases K4 Sn9 and KSn during alloying reaction. Herein, the TiC/C-carbon nanotubes (CNTs) is prepared as an effective buffer matrix and composited with Sn particles (Sn-TiC/C-CNTs) through the high-energy ball-milling method. Owing to the conductive and rigid properties, the TiC/C-CNTs matrix enhances the electrical conductivity as well as mechanical integrity of Sn in the composite material and thus ultimately contributes to performance supremacy in terms of electrochemical K+ storage properties. During potassiation process, the TiC/C-CNTs matrix not only dissipates the internal stress toward random radial orientations within the Sn particle but also provides electrical pathways for the intermediate insulating phases; this tends to reduce microcracking and prevent considerable electrode degradation.
RESUMEN
Among lithium-sulfur (Li-S) battery materials, sulfurized polyacrylonitrile (SPAN) has attracted substantial attention as a cathode material owing to its potential to bypass the problematic polysulfide formation and shuttling effect. Carbonate-based electrolytes have been eschewed compared with ether-based electrolytes because of their poor compatibility with Li metal anodes. In this work, we design and study an electrolyte comprising 0.8 M of lithium bis(trifluoromethanesulfonyl)imide, 0.2 M of lithium difluoro(oxalate)borate, and 0.05 M of lithium hexafluorophosphate in ethyl methyl carbonate/fluoroethylene carbonate = 3:1 v/v solution in the Li-S battery coupled with a Li metal anode and SPAN cathode. The well-designed carbonate-based electrolyte effectively stabilizes both electrodes, delivering high Coulombic efficiencies with stable cyclability. Studies using operando optical microscopy and atomic force microscopy demonstrate that dense, uniform Li deposition is promoted to suppress dendrite growth even at a high current density. Operando Raman spectroscopy reveals a reversible Li+ storage behavior in the SPAN structure through the cleavage of disulfide bonds and their redimerization during lithiation and delithiation. As a result, the proposed Li-S battery delivers an overall capacity retention of 73.5% over 1000 cycles, with high Coulombic efficiencies over 99.9%.
RESUMEN
PURPOSE: This study aimed to investigate the parameters with a significant impact on delivery quality assurance (DQA) failure and analyze the planning parameters as possible predictors of DQA failure for helical tomotherapy. METHODS: In total, 212 patients who passed or failed DQA measurements were retrospectively included in this study. Brain (n = 43), head and neck (n = 37), spinal (n = 12), prostate (n = 36), rectal (n = 36), pelvis (n = 13), cranial spinal irradiation and a treatment field including lymph nodes (n = 24), and other types of cancer (n = 11) were selected. The correlation between DQA results and treatment planning parameters were analyzed using logistic regression analysis. Receiver operating characteristic (ROC) curves, areas under the curves (AUCs), and the Classification and Regression Tree (CART) algorithm were used to analyze treatment planning parameters as possible predictors for DQA failure. RESULTS: The AUC for leaf open time (LOT) was 0.70, and its cut-off point was approximately 30%. The ROC curve for the predicted probability calculated when the multivariate variable model was applied showed an AUC of 0.815. We confirmed that total monitor units, total dose, and LOT were significant predictors for DQA failure using the CART. CONCLUSIONS: The probability of DQA failure was higher when the percentage of LOT below 100 ms was higher than 30%. The percentage of LOT below 100 ms should be considered in the treatment planning process. The findings from this study may assist in the prediction of DQA failure in the future.