New insights into surface behavior of dimethylated arsenicals on montmorillonite using X-ray absorption spectroscopy.

Although recent studies have revealed the occurrence of dimethylated arsenicals, little is known about their behavior in environment. This study investigates the adsorption behavior of dimethylarsinic acid (DMAV), dimethyldithioarsinic acid (DMDTAV), and dimethylmonothioarsinic acid (DMMTAV) on montmorillonite. Complicated transformations among arsenicals under normal environmental conditions were also considered. Our results clearly demonstrate that DMDTAV was oxidized to DMMTAV, which was relatively stable but partially transformed to DMAV when exposed to air during adsorption. The transformed DMAV exhibited high adsorption affinities for montmorillonite, while DMMTAV and DMDTAV were not appreciably retained by montmorillonite for 48 h. This is the first study to provide insights into DMDTAV oxidation under environmental conditions. X-ray absorption near edge structure and extended X-ray absorption fine structure studies confirmed that most of the adsorbed arsenicals on montmorillonite were DMAV. The significantly different bonding characteristics of each adsorbed DMAV provide direct evidence for the transformation of DMAV from DMDTAV and DMMTAV. Our study suggests the importance of incorporating the DMMTAV in the realistic risk management for soil environments because it is highly toxic, easily transformed from DMDTAV, and stable in the environment.

Strain Development of Selective Adsorption of Hydrocarbons in a Cu-ZSM-5 Crystal.

Zeolites are 3D aluminosilicate materials having subnanometer pore channels. The Lewis basic pores have charge-balancing cations, easily tuned to metallic ions as more chemically active sites. Among the ion-exchanged zeolites, Cu2+ ion-exchanged ZSM-5 (Cu-ZSM-5) is one of the most active zeolites with chemical interactions of Lewis basic compounds. Even though the chemical interactions of hydrocarbons with Cu2+ sites in Cu-ZSM-5 have been tremendously studied in the category of zeolite catalysts, it is not yet thoroughly investigated how such interactions affect the structural lattice of the zeolite. Hydrocarbons with different chemical properties and their relative size can induce lattice strain by different chemical adsorption effects on the Cu2+ sites. In this work, we investigate the internal deformation of the Cu-ZSM-5 crystal using Bragg coherent X-ray diffraction imaging during the adsorption of four hydrocarbons depending on the alkyl chain length, the existence of a double bond in the molecule, linear structure versus benzene ring structure, and so forth. In the three-carbon system (propane and propene), relatively weak chemical adsorption occurred at room temperature and 100 °C, whereas strong adsorption was observed over 150 °C. For the six-carbon system (n-hexane and benzene), strong strains evolved in the crystal by active chemical adsorption from 150 °C. The observations suggest that propene and propane adsorb at the Cu2+ sites from the outer shell to the center with increasing temperature. In comparison, n-hexane and benzene adsorb at both parts at the same temperature. The results provide the internal structural information for the lattice with the chemical interactions of hydrocarbons in the Cu-ZSM-5 zeolite and help to understand zeolite-based chemisorption or catalysis research.

Time-resolved in situ visualization of the structural response of zeolites during catalysis.

Zeolites are three-dimensional aluminosilicates having unique properties from the size and connectivity of their sub-nanometer pores, the Si/Al ratio of the anionic framework, and the charge-balancing cations. The inhomogeneous distribution of the cations affects their catalytic performances because it influences the intra-crystalline diffusion rates of the reactants and products. However, the structural deformation regarding inhomogeneous active regions during the catalysis is not yet observed by conventional analytical tools. Here we employ in situ X-ray free electron laser-based time-resolved coherent X-ray diffraction imaging to investigate the internal deformations originating from the inhomogeneous Cu ion distributions in Cu-exchanged ZSM-5 zeolite crystals during the deoxygenation of nitrogen oxides with propene. We show that the interactions between the reactants and the active sites lead to an unusual strain distribution, confirmed by density functional theory simulations. These observations provide insights into the role of structural inhomogeneity in zeolites during catalysis and will assist the future design of zeolites for their applications.

Active site localization of methane oxidation on Pt nanocrystals.

High catalytic efficiency in metal nanocatalysts is attributed to large surface area to volume ratios and an abundance of under-coordinated atoms that can decrease kinetic barriers. Although overall shape or size changes of nanocatalysts have been observed as a result of catalytic processes, structural changes at low-coordination sites such as edges, remain poorly understood. Here, we report high-lattice distortion at edges of Pt nanocrystals during heterogeneous catalytic methane oxidation based on in situ 3D Bragg coherent X-ray diffraction imaging. We directly observe contraction at edges owing to adsorption of oxygen. This strain increases during methane oxidation and it returns to the original state after completing the reaction process. The results are in good agreement with finite element models that incorporate forces, as determined by reactive molecular dynamics simulations. Reaction mechanisms obtained from in situ strain imaging thus provide important insights for improving catalysts and designing future nanostructured catalytic materials.

Enhancement of charge transport properties of small molecule semiconductors by controlling fluorine substitution and effects on photovoltaic properties of organic solar cells and perovskite solar cells.

We prepared a series of small molecules based on 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole) with different fluorine substitution patterns (0F-4F). Depending on symmetricity and numbers of fluorine atoms incorporated in the benzo[c][1,2,5]thiadiazole unit, they show very different optical and morphological properties in a film. 2F and 4F, which featured symmetric and even-numbered fluorine substitution patterns, display improved molecular packing structures and higher crystalline properties in a film compared with 1F and 3F and thus, 2F achieved the highest OTFT mobility, which is followed by 4F. In the bulk heterojunction solar cell fabricated with PC71BM, 2F achieves the highest photovoltaic performance with an 8.14% efficiency and 0F shows the lowest efficiency of 1.28%. Moreover, the planar-type perovskite solar cell (PSC) prepared with 2F as a dopant-free hole transport material shows a high power conversion efficiency of 14.5% due to its high charge transporting properties, which were significantly improved compared with the corresponding PSC device obtained from 0F (8.5%). From the studies, it is demonstrated that low variation in the local dipole moment and the narrow distribution of 2F conformers make intermolecular interactions favorable, which may effectively drive crystal formations in the solid state and thus, higher charge transport properties compared with 1F and 3F.

Demonstration of feasibility of X-ray free electron laser studies of dynamics of nanoparticles in entangled polymer melts.

The recent advent of hard x-ray free electron lasers (XFELs) opens new areas of science due to their exceptional brightness, coherence, and time structure. In principle, such sources enable studies of dynamics of condensed matter systems over times ranging from femtoseconds to seconds. However, the studies of "slow" dynamics in polymeric materials still remain in question due to the characteristics of the XFEL beam and concerns about sample damage. Here we demonstrate the feasibility of measuring the relaxation dynamics of gold nanoparticles suspended in polymer melts using X-ray photon correlation spectroscopy (XPCS), while also monitoring eventual X-ray induced damage. In spite of inherently large pulse-to-pulse intensity and position variations of the XFEL beam, measurements can be realized at slow time scales. The X-ray induced damage and heating are less than initially expected for soft matter materials.

Nanoscopic management of molecular packing and orientation of small molecules by a combination of linear and branched alkyl side chains.

We synthesized a series of acceptor-donor-acceptor-type small molecules (SIDPP-EE, SIDPP-EO, SIDPP-OE, and SIDPP-OO) consisting of a dithienosilole (SI) electron-donating moiety and two diketopyrrolopyrrole (DPP) electron-withdrawing moieties each bearing linear n-octyl (O) and/or branched 2-ethylhexyl (E) alkyl side chains. X-ray diffraction patterns revealed that SIDPP-EE and SIDPP-EO films were highly crystalline with pronounced edge-on orientation, whereas SIDPP-OE and SIDPP-OO films were less crystalline with a radial distribution of molecular orientations. Near-edge X-ray absorption fine structure spectroscopy disclosed an edge-on orientation with a molecular backbone tilt angle of ∼22° for both SIDPP-EE and SIDPP-EO. Our analysis of the molecular packing and orientation indicated that the shorter 2-ethylhexyl groups on the SI core promote tight π-π stacking of the molecular backbone, whereas n-octyl groups on the SI core hinder close π-π stacking to some degree. Conversely, the longer linear n-octyl groups on the DPP arms facilitate close intermolecular packing via octyl-octyl interdigitation. Quantum mechanics/molecular mechanics molecular dynamics simulations determined the optimal three-dimensional positions of the flexible alkyl side chains of the SI and DPP units, which elucidates the structural cause of the molecular packing and orientation explicitly. The alkyl-chain-dependent molecular stacking significantly affected the electrical properties of the molecular films. The edge-on oriented molecules showed high hole mobilities in organic field-effect transistors, while the radially oriented molecules exhibited high photovoltaic properties in organic photovoltaic cells. These results demonstrate that appropriate positioning of alkyl side chains can modulate crystallinity and molecular orientation in SIDPP films, which ultimately have a profound impact on carrier transport and photovoltaic performance.