RESUMEN
Laboratory tests were conducted to characterize the composition of emissions from sanding Corian®, a solid-surface composite material mainly composed of alumina trihydrate (ATH) and acrylic polymer. Three sandpaper materials (ceramic, silicon carbide, and aluminum oxide) were tested to distinguish the contribution of aluminum-containing dust in the emission from Corian® and sandpaper itself. The result can help identify the main cause of the pulmonary fibrosis from exposure to aluminum-containing dust while sanding Corian®. Airborne dust samples were measured using direct-reading instruments and collected using a Micro-Orifice Uniform Deposit Impactor (MOUDI) for estimating the normalized dust generation rate. The size-classified dust samples from MOUDI were analyzed for elemental aluminum content. Additionally, air samples were analyzed for characterizing methyl methacrylate (MMA). The results from the direct-reading instruments reveal that the size distribution of particulate from sanding Corian® differs from that of sawing Corian®, showing that the size distribution of dust is affected by the fabrication process. The normalized respirable dust generation rate indicates that more respirable dust was generated during sanding Corian® board. However, the use of aluminum oxide sandpaper does not result in a higher aluminum content in the respirable dust from sanding Corian®, suggesting that the aluminum content of the respirable dust is primarily originated from Corian® itself. The generation rates of MMA from sanding did not vary much among all types of sandpapers, and they were much lower than that of sawing, likely due to the higher temperature in the sawing process.
RESUMEN
Solid surface composites (SSCs) are a class of popular construction materials composed of aluminum trihydrate and acrylic polymers. Previous investigations have demonstrated that sawing SSC releases substantial airborne dusts, with a number-based geometric mean diameter of 1.05 µm. We reported that in mice, aspiration exposure to airborne SSC dusts induced symptoms of pulmonary inflammation at 24-h postexposure: neutrophilic influx, alveolitis, and increased lactate dehydrogenase (LDH) and pro-inflammatory cytokine levels in lavage fluid. The particles appeared to be poorly cleared, with 81% remaining at 14-day postexposure. The objective of this study was to determine the toxicity specifically of respirable particles on a model of human alveolar macrophages (THP-1). The relative toxicities of subfractions (0.07, 0.66, 1.58, 5.0, and 13.42 µm diameter) of the airborne particles were also determined. THP-1 macrophages were exposed for 24 h to respirable particles from sawing SSC (0, 12.5, 25, 50, or 100 µg/ml) or size-specific fractions (100 µg/ml). Exposure to respirable SSC particles induced THP-1 macrophage toxicity in a dose-dependent manner. Viability was decreased by 15% and 19% after exposure to 50 and 100 µg/ml SSC, respectively, which correlated with increased cell culture supernatant LDH activity by 40% and 70% when compared to control. Reactive oxygen species (ROS) production and inflammatory cytokines were increased in a dose-dependent manner. A size-dependent cytotoxic effect was observed in the cells exposed to subfractions of SSC particles. SSC particles of 0.07, 0.66, and 1.58 µm diameter killed 36%, 17%, and 22% of cells, respectively. These results indicate a potential for cytotoxicity of respirable SSC particles and a relationship between particle size and toxicity, with the smallest fractions appearing to exhibit the greatest toxicity.
Asunto(s)
Materiales de Construcción/toxicidad , Macrófagos Alveolares/efectos de los fármacos , Animales , Polvo , Humanos , Técnicas In Vitro , Exposición por Inhalación , Macrófagos Alveolares/patología , Ratones , Tamaño de la Partícula , Pruebas de ToxicidadRESUMEN
We conducted detailed analyses of the composition of emissions from sawing Corian®, a solid surface composite material, in a laboratory testing system. The analyses included the aluminum content of size-selective dust samples, semivolatile organic compounds (SVOCs) in respirable dust samples, and volatile organic compounds (VOCs). The normalized respirable dust generation rate found using a Micro-Orifice Uniform Deposit Impactor was 5.9 milligrams per gram (mg g-1) suggesting that 0.59% of the mass removed from sawing Corian® becomes respirable dust. The alumina trihydrate content of the dust was consistently above 85% in most parts of the respirable size range, verifying an earlier finding that it is the dominant composition of the airborne particles of all sizes, including ultrafine particles. VOC analyses revealed that methyl methacrylate (MMA) was the most abundant compound, with a generation rate of 6.9 mg g-1 (0.69% of the mass removed from sawing Corian® became MMA vapor). The SVOC analysis only found a small amount of MMA (0.55%) in the bulk dust.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Aluminio/análisis , Polvo/análisis , Exposición Profesional/análisis , Compuestos Orgánicos Volátiles/análisis , Aluminio/química , Humanos , Material Particulado/análisisRESUMEN
The production of metal nanoclusters composed of less than 10(3) atoms is important for applications in energy conversion and medicine, and for fundamental studies of nanomaterial nucleation and growth. Unfortunately, existing synthesis methods do not enable adequate control of cluster formation, particularly at atmospheric pressure wherein formation typically occurs on sub-millisecond timescales. Here, we demonstrate that ligand-free, unagglomerated nickel nanoclusters can be continuously synthesized at atmospheric pressure via the decomposition of bis(cyclopentadienyl)nickel(II) (nickelocene) in a spatially-confined microplasma process that rapidly quenches particle growth and agglomeration. The clusters were measured on line by ion mobility spectrometry (IMS) and further analyzed by atomic force microscopy (AFM). Our results reveal that stable clusters with spherical equivalent mean diameters below 10 Åare produced, and by controlling the nickelocene concentration, the mean diameter can be tuned up to â¼50 Å. Although diameter is often the sole metric used in nanocluster and nanoparticle characterization, to infer the number of atoms in AFM and IMS detected clusters, we compare measured AFM heights and IMS inferred collision cross sections to theoretical predictions based on both bulk matter approximations and density functional theory and Hartree-Fock calculated Ni nanocluster structures (composed of 2-15 atoms for the latter). The calculations suggest that Ni nanoclusters composed of less than 10(2) atoms can be produced repeatably with simple microplasma reactors.