RESUMEN
Designing solid electrolyte is deemed as an effective approach to suppress the side reaction of zinc anode and active material dissolution of cathodes in liquid electrolytes for zinc metal batteries (ZMBs). Herein, kaolin is comprehensively investigated as raw material to prepare solid electrolyte (KL-Zn) for ZMBs. As demonstrated, KL-Zn electrolyte is an excellent electronic insulator and zinc ionic conductor, which presents wide voltage window of 2.73 V, high ionic conductivity of 5.08 mS cm-1, and high Zn2+ transference number of 0.79. For the Zn//Zn cells, superior cyclic stability lasting for 2200 h can be achieved at 0.2 mA cm-2. For the Zn//NH4V4O10 batteries, stable capacity of 245.8 mAh g-1 can be maintained at 0.2 A g-1 after 200 cycles along with high retention ratio of 81%, manifesting KL-Zn electrolyte contributes to stabilize the crystal structure of NH4V4O10 cathode. These satisfying performances can be attributed to the enlarged interlayer spacing, zinc (de)solvation-free mechanism and fast diffusion kinetics of KL-Zn electrolyte, availably guaranteeing uniform zinc deposition for zinc anode and reversible zinc (de)intercalation for NH4V4O10 cathode. Additionally, this work also verifies the application possibility of KL-Zn electrolyte for Zn//MnO2 batteries and Zn//I2 batteries, suggesting the universality of mineral-based solid electrolyte.
RESUMEN
Zinc dendrite, active iodine dissolution, and polyiodide shuttle caused by the strong interaction between liquid electrolyte and solid electrode are the chief culprits for the capacity attenuation of aqueous zinc-iodine batteries (ZIBs). Herein, mullite is adopted as raw material to prepare Zn-based solid-state electrolyte (Zn-ML) for ZIBs through zinc ion exchange strategy. Owing to the merits of low electronic conductivity, low zinc diffusion energy barrier, and strong polyiodide adsorption capability, Zn-ML electrolyte can effectively isolate the redox reactions of zinc anode and AC@I2 cathode, guide the reversible zinc deposition behavior, and inhibit the active iodine dissolution as well as polyiodide shuttle during cycling process. As expected, wide operating voltage window of 2.7 V (vs Zn2+/Zn), high Zn2+ transference number of 0.51, and low activation energy barrier of 29.7 kJ mol-1 can be achieved for the solid-state Zn//Zn cells. Meanwhile, high reversible capacity of 127.4 and 107.6 mAh g-1 can be maintained at 0.5 and 1 A g-1 after 3 000 and 2 100 cycles for the solid-state Zn//AC@I2 batteries, corresponding to high-capacity retention ratio of 85.2% and 80.7%, respectively. This study will inspire the development of mineral-derived solid electrolyte, and facilitate its application in Zn-based secondary batteries.
RESUMEN
The sluggish kinetics of oxygen evolution reaction (OER) and high iridium loading in catalyst coated membrane (CCM) are the key challenges for practical proton exchange membrane water electrolyzer (PEMWE). Herein, we demonstrate high-surface-area nano-metal diborides as promising supports of iridium-based OER nanocatalysts for realizing efficient, low-iridium-loading PEMWE. Nano-metal diborides are prepared by a novel disulphide-to-diboride transition route, in which the entropy contribution to the Gibbs free energy by generation of gaseous sulfur-containing products plays a crucial role. The nano-metal diborides, TaB2 in particular, are investigated as the support of IrO2 nanocatalysts, which finally forms a TaOx/IrO2 heterojunction catalytic layer on TaB2 surface. Multiple advantageous properties are achieved simultaneously by the resulting composite material (denoted as IrO2@TaB2), including high electrical conductivity, improved iridium mass activity and enhanced corrosion resistance. As a consequence, the IrO2@TaB2 can be used to fabricate the membrane electrode with a low iridium loading of 0.15 mg cm-2, and to give an excellent catalytic performance (3.06 A cm-2@2.0 V@80 oC) in PEMWE-the one that is usually inaccessible by unsupported Ir-based nanocatalysts and the vast majority of existing supported Ir-based catalysts at such a low iridium loading.
RESUMEN
Proton exchange membrane (PEM) water electrolysis, which is one of methods of hydrogen production with the most potential, has attracted more attention due to its energy conversion and storage potential. In this paper, a steady state, three-dimensional mathematical model coupled with the electrochemical and mass transfer physical fields for a PEM water electrolyzer was established. The influence of the different operation parameters on the cell performance was discussed. Moreover, the different patterns of the flow field, such as parallel, serpentine, multi-serpentine, and interdigitate flow fields, were simulated to reveal their influence on the mass transfer and current distribution and how they consequently affected the cell performance. The results of the numerical modeling were in good agreement with the experimental data. The results demonstrated that a higher temperature led to a better mass transfer, current distribution, and cell performance. By comparing the polarization curve, current, velocity, and pressure distribution, the results also indicated that the PEM water electrolyzer with a parallel flow field had the best performance. The results in this study can help in optimizing the design of PEM water electrolyzers.
RESUMEN
The electrode, as one of the most critical components in a proton exchange membrane water electrolysis (PEMWE) cell for hydrogen production, has a significant impact on cell performance. Electrodes that are fabricated via various techniques may exhibit different morphologies or properties, which might change the kinetics and resistances of the PEMWE. In this study, we have successfully fabricated several electrodes by different techniques, and the effects of electrode coating methods (ultrasonic spray, blade coating, and rod coating), hot press, and decal transfer processes are comprehensively investigated. The performance differences between various electrodes are due to kinetic or high frequency resistance changes, while the influences are not significant, with the biggest deviation of about 26 mV at 2.0 A cm-2. In addition, the effects of catalyst ink compositions, including ionomer to catalyst ratio (0.1 to 0.3), water to alcohol ratio (1:1 to 3:1), and catalyst weight percentage (10% to 30%), are also studied, and the electrodes' performance variations are less than 10 mV at 2.0 A cm-2. The results show that the PEMWE electrode has superior compatibility and redundancy, which demonstrates the high flexibility of the electrode and its applicability for large-scale manufacturing.
RESUMEN
For a proton exchange membrane electrolyzer cell (PEMEC), conditioning is an essential process to enhance its performance, reproducibility, and economic efficiency. To get more insights into conditioning, a PEMEC with Ir-coated gas diffusion electrode (IrGDE) was investigated by electrochemistry and in situ visualization characterization techniques. The changes of polarization curves, electrochemical impedance spectra (EIS), and bubble dynamics before and after conditioning are analyzed. The polarization curves show that the cell efficiency increased by 9.15% at 0.4 A/cm2, and the EIS and Tafel slope results indicate that both the ohmic and activation overpotential losses decrease after conditioning. The visualization of bubble formation unveils that the number of bubble sites increased greatly from 14 to 29 per pore after conditioning, at the same voltage of 1.6 V. Under the same current density of 0.2 A/cm2; the average bubble detachment size decreased obviously from 35 to 25 µm. The electrochemistry and visualization characterization results jointly unveiled the increase of reaction sites and the surface oxidation on the IrGDE during conditioning, which provides more insights into the conditioning and benefits for the future GDE design and optimization.
RESUMEN
An anode electrode concept of thin catalyst-coated liquid/gas diffusion layers (CCLGDLs), by integrating Ir catalysts with Ti thin tunable LGDLs with facile electroplating in proton exchange membrane electrolyzer cells (PEMECs), is proposed. The CCLGDL design with only 0.08 mgIr cm-2 can achieve comparative cell performances to the conventional commercial electrode design, saving ≈97% Ir catalyst and augmenting a catalyst utilization to ≈24 times. CCLGDLs with regulated patterns enable insight into how pattern morphology impacts reaction kinetics and catalyst utilization in PEMECs. A specially designed two-sided transparent reaction-visible cell assists the in situ visualization of the PEM/electrode reaction interface for the first time. Oxygen gas is observed accumulating at the reaction interface, limiting the active area and increasing the cell impedances. It is demonstrated that mass transport in PEMECs can be modified by tuning CCLGDL patterns, thus improving the catalyst activation and utilization. The CCLGDL concept promises a future electrode design strategy with a simplified fabrication process and enhanced catalyst utilization. Furthermore, the CCLGDL concept also shows great potential in being a powerful tool for in situ reaction interface research in PEMECs and other energy conversion devices with solid polymer electrolytes.
RESUMEN
Proton-exchange membrane water electrolysis (PEMWE) produces hydrogen with high efficiency and purity but uses high-loading platinum-group metal (PGM) catalysts. Such concerns call for the development of novel electrode architectures to improve catalyst utilization and mass activity, thus promoting PEMWE cost competitiveness for large-scale implementation. In this study, we demonstrated, for the first time, a novel two-dimensional (2D)-patterned electrode with edge effects to address these challenges. The edge effect was induced by membrane properties, potential distribution, and counter electrode coverage and could be optimized by tuning the catalyst layer dimensions. To achieve identical PEMWE performance, the optimal pattern saved the 21% anode PGM catalyst compared with the conventional catalyst fully covered electrode. The PGM catalyst could be further reduced by 61% to boost mass activity with no significant performance loss. The results also indicated that the electrode uniformity in PEMWE cells might not be as critical as that in PEM fuel cells. The novel 2D-patterned electrode could effectively reduce PGM catalyst loading, accelerating affordable and large-scale production of hydrogen and other value-added chemicals via electrolysis.
RESUMEN
The investigation of highly effective, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. To establish a new hydrogen energy system and gradually replace the traditional fossil-based energy, electrochemical water-splitting is considered the most promising, environmentally friendly, and efficient way to produce pure hydrogen. Compared with the commonly used platinum (Pt)-based catalysts, ruthenium (Ru) is expected to be a good alternative because of its similar hydrogen bonding energy, lower water decomposition barrier, and considerably lower price. Analyzing and revealing the HER mechanisms, as well as identifying a rational design of Ru-based HER catalysts with desirable activity and stability is indispensable. In this review, the research progress on HER electrocatalysts and the relevant describing parameters for HER performance are briefly introduced. Moreover, four major strategies to improve the performance of Ru-based electrocatalysts, including electronic effect modulation, support engineering, structure design, and maximum utilization (single atom) are discussed. Finally, the challenges, solutions and prospects are highlighted to prompt the practical applications of Ru-based electrocatalysts for HER.
RESUMEN
Better understanding of true electrochemical reaction behaviors in electrochemical energy devices has long been desired. It has been assumed so far that the reactions occur across the entire catalyst layer (CL), which is designed and fabricated uniformly with catalysts, conductors of protons and electrons, and pathways for reactants and products. By introducing a state-of-the-art characterization system, a thin, highly tunable liquid/gas diffusion layer (LGDL), and an innovative design of electrochemical proton exchange membrane electrolyzer cells (PEMECs), the electrochemical reactions on both microspatial and microtemporal scales are revealed for the first time. Surprisingly, reactions occur only on the CL adjacent to good electrical conductors. On the basis of these findings, new CL fabrications on the novel LGDLs exhibit more than 50 times higher mass activity than conventional catalyst-coated membranes in PEMECs. This discovery presents an opportunity to enhance the multiphase interfacial effects, maximizing the use of the catalysts and significantly reducing the cost of these devices.