Enhancing high-density microalgae cultivation via exogenous supplementation of biostimulant derived from onion peel waste for sustainable biodiesel production.

Microalgae demonstrate significant potential as a source of liquid-based biofuels. However, increasing biomass productivity in existing cultivation systems is a critical prerequisite for their successful integration into large-scale operations. Thus, the current work aimed to accelerate the growth of C. vulgaris via exogenous supplementation of biostimulant derived from onion peel waste. Under the optimal growth conditions, which entailed a biostimulant dosage of 37.5% v/v, a pH of 3, an air flow rate of 0.4 L/min, and a 2% v/v inoculum harvested during the mid-log phase, yielded a maximum biomass concentration of 1.865 g/L. Under the arbitrarily optimized parameters, a comparable growth pattern was evident in the upscaled cultivation of C. vulgaris, underscoring the potential commercial viability of the biostimulant. The biostimulant, characterized through gas chromatography-mass spectrometry (GC-MS) analysis, revealed a composition rich in polyphenolic and organo-sulphur compounds, notably including allyl trisulfide (28.13%), methyl allyl trisulfide (23.04%), and allyl disulfide (20.78%), showcasing potent antioxidant properties. Additionally, microalgae treated with the biostimulant consistently retained their lipid content at 18.44% without any significant reduction. Furthermore, a significant rise in saturated fatty acid (SFA) content was observed, with C16:0 and C18:1 dominating both bench-scale (44.08% and 14.01%) and upscaled (51.12% and 13.07%) microalgae cultures, in contrast to the control group where C18:2 was prevalent. Consequently, SFA contents reached 54.35% and 65.43% in bench-scale and upscaled samples respectively, compared to 33.73% in the control culture. These compositional characteristics align well with the requirements for producing high-quality crude biodiesel.

Functionalized magnetic lipase/Cu3(PO4)2 hybrid nanoflower: Synthesis, characterization, and enzymatic evaluation.

This paper reports the synthesis of magnetic lipase/Cu3(PO4)2 hybrid nanoflowers via a rapid ultrasonication method. The enzyme immobilization and nanoflower growth mechanism can be described as the (a) Fe2+, Cu2+, and phosphate "binding", (b) metal phosphate crystals formation, (c) formation and growth of metal phosphate crystals to form plate-like structures, and (d) self-assembly of plate structures that forms a flower-like structure. Some factors contributing to the morphology of the hybrid nanoflowers structure includes the time and concentration of lipase were studied. The effect of temperature, pH, and duration on the enzyme immobilization yield were also studied. In addition, the strong magnetic property (9.73 emu g-1) of the nanoflowers resulted in higher retrievability and reusability after repeated usage. Furthermore, the catalytic activity of lipase/Cu3(PO4)2 hybrid nanoflowers was investigated and the ideal conditions were determined whereby, the maximum activity was calculated to be 1511 ± 44 U g-1, showing a catalytic enhancement of 89% in comparison to free lipase. The reusability study showed that, after 5 cycles, the magnetic lipase/Cu3(PO4)2 nanoflowers successfully retained 60% of its initial activity. From the results obtained, it is worth noting that, the magnetic lipase/Cu3(PO4)2 hybrid nanoflowers are highly efficient in industrial biocatalytic applications.

Life cycle assessment of biodiesel production by using impregnated magnetic biochar derived from waste palm kernel shell.

Biodiesel is renewable, biodegradable, biocompatible (non-toxic) and environmentally friendly, which emits less pollution than traditional fossil-based diesel, making it the most promising and ideal option. However, biodiesel is facing many current issues, mostly related to the utilisation of homogeneous catalytic technology, and this circumstance obstructs its potential development and advancement. Therefore, new pathways for biodiesel production need to be explored, and the aforementioned issues need to be addressed. Recently, a study was conducted on the impregnated magnetic biochar derived from a waste palm kernel shell (PKS) catalyst that can replace conventional catalysts due to its reusability property. Nevertheless, the environmental impacts of impregnated magnetic biochar derived from waste PKS catalyst for biodiesel production are yet to be studied. This study focuses on the evaluation of the life cycle assessment (LCA) of palm-based cooking oil for biodiesel production catalysed by impregnated magnetic biochar derived from waste PKS. Simapro was used in this study to evaluate the impact assessment methodologies. Case 1 (6.64 × 102 Pt) has contributed less to environmental impacts than Case 2 (1.83 × 103 Pt). This indicates purchasing refined palm oil for biodiesel production may reduce environmental impacts by 64% compared to producing biodiesel from raw fruit bunches. In the midpoint assessment, the transesterification process was identified as the hotspot and marine aquatic ecotoxicity as the highest impact category with a value of 1.00 × 106 kg 1,4-DB eq for 1 tonne of biodiesel produced. The endpoint results showed that Case 1 revealed the greatest impact on the transesterification process, with cumulative damage of 461 Pt. Scenario without processing the raw palm fruit bunches to obtained palm oil was better than Case 2. Further research should be conducted on life cycle cost and sensitivity analysis to evaluate the economic feasibility and promote sustainable biodiesel production.

Recent advancements in enzyme-incorporated nanomaterials: Synthesis, mechanistic formation, and applications.

Over the past decade, nanotechnology has been developed and employed across various entities. Among the numerous nanostructured material types, enzyme-incorporated nanomaterials have shown great potential in various fields, as an alternative to biologically derived as well as synthetically developed hybrid structures. The mechanism of incorporating enzyme onto a nanostructure depends on several factors including the method of immobilization, type of nanomaterial, as well as operational and environmental conditions. The prospects of enzyme-incorporated nanomaterials have shown promising results across various applications, such as biocatalysts, biosensors, drug therapy, and wastewater treatment. This is due to their excellent ability to exhibit chemical and physical properties such as high surface-to-volume ratio, recovery and/or reusability rates, sensitivity, response scale, and stable catalytic activity across wide operating conditions. In this review, the evolution of enzyme-incorporated nanomaterials along with their impact on our society due to its state-of-the-art properties, and its significance across different industrial applications are discussed. In addition, the weakness and future prospects of enzyme-incorporated nanomaterials were also discussed to guide scientists for futuristic research and development in this field.

Magnetic biochar derived from waste palm kernel shell for biodiesel production via sulfonation.

Due to its environment-friendly and replenishable characteristics, biodiesel has the potential to substitute fossil fuels as an alternative source of energy. Although biodiesel has many benefits to offer, manufacturing biodiesel on an industrial scale is uneconomical as a high cost of feedstock is required. A novel sulfonated and magnetic catalyst synthesised from a palm kernel shell (PMB-SO3H) was first introduced in this study for methyl ester or biodiesel production to reduce capital costs. The wasted palm kernel shell (PKS) biochar impregnated with ferrite Fe3O4 was synthesised with concentrated sulphuric acid through the sulfonation process. The SEM, EDX, FTIR, VSM and TGA characterization of the catalysts were presented. Then, the optimisation of biodiesel synthesis was catalysed by PMB-SO3H via the Response Surface Methodology (RSM). It was found that the maximum biodiesel yield of 90.2% was achieved under these optimum operating conditions: 65 °C, 102 min, methanol to oil ratio of 13:1 and the catalyst loading of 3.66 wt%. Overall, PMB-SO3H demonstrated acceptable catalysing capability on its first cycle, which subsequently showed a reduction of the reusability performance after 4 cycles. An important practical implication is that PMB-SO3H can be established as a promising heterogeneous catalyst by incorporating an iron layer which can substantially improve the catalyst separation performance in biodiesel production.

Croton megalocarpus oil: a feasible non-edible oil source for biodiesel production.

This study presents the feasibility of converting a non-edible oil source native to the Africa region -croton megalocarpus oil to methyl esters (biodiesel) using sulfated tin oxide enhanced with SiO(2) (SO(4)(2-)/SnO(2)-SiO(2)) as super acid solid catalyst. This study was conducted using design of experiment (DoE), specifically, response surface methodology based on three-variable central composite design (CCD) with alpha (alpha)=2. The reaction parameters studied are: reaction temperature (60-180 degrees C), reaction period (1-3h) and methanol to oil ratio (1:6-1:24). Although the oil was found to contain high free fatty acid, however, yield up to 95% was obtained without any pre-treatment step with the following reaction conditions: 180 degrees C, 2h and 15:1 methanol to oil molar ratio, while keeping constant catalyst concentration and stirring speed at 3 wt.% and 350-360 rpm, respectively.