Thermal Equation of State of Cubic Silicon Carbide at High Pressures.

We have performed in situ X-ray diffraction measurements of cubic silicon carbide (SiC) with a zinc-blende crystal structure (B3) at high pressures and temperatures using multi-anvil apparatus. The ambient volume inferred from the compression curves is smaller than that of the starting material. Using the 3rd-order Birch-Murnaghan equation of state and the Mie-Grüneisen-Debye model, we have determined the thermoelastic parameters of the B3-SiC to be K0=228±3 GPa, K0',=4.4±0.4, q=0.27±0.37, where K0, K0' and q are the isothermal bulk modulus, its pressure derivative and logarithmic volume dependence of the Grüneisen parameter, respectively. Using the 3rd-order Birch-Murnaghan EOS with the thermal expansion coefficient, the thermoelastic parameters have been found as K0=221±3 GPa, K0',=5.2±0.4, α0=0.90±0.02 ⋅ 10-5 ⋅ K-1, where α0 is the thermal expansion coefficient at room pressure and temperature. We have determined that paired B3-SiC - MgO calibrants can be used to estimate pressure and temperature simultaneously in ultrahigh-pressure experiments up to 60 GPa.

Toughening oxide glasses through paracrystallization.

Glasses, unlike crystals, are intrinsically brittle due to the absence of microstructure-controlled toughening, creating fundamental constraints for their technological applications. Consequently, strategies for toughening glasses without compromising their other advantageous properties have been long sought after but elusive. Here we report exceptional toughening in oxide glasses via paracrystallization, using aluminosilicate glass as an example. By combining experiments and computational modelling, we demonstrate the uniform formation of crystal-like medium-range order clusters pervading the glass structure as a result of paracrystallization under high-pressure and high-temperature conditions. The paracrystalline oxide glasses display superior toughness, reaching up to 1.99 ± 0.06 MPa m1/2, surpassing any other reported bulk oxide glasses, to the best of our knowledge. We attribute this exceptional toughening to the excitation of multiple shear bands caused by a stress-induced inverse transformation from the paracrystalline to amorphous states, revealing plastic deformation characteristics. This discovery presents a potent strategy for designing highly damage-tolerant glass materials and emphasizes the substantial influence of atomic-level structural variation on the properties of oxide glasses.

Variation in bridgmanite grain size accounts for the mid-mantle viscosity jump.

A viscosity jump of one to two orders of magnitude in the lower mantle of Earth at 800-1,200-km depth is inferred from geoid inversions and slab-subducting speeds. This jump is known as the mid-mantle viscosity jump1,2. The mid-mantle viscosity jump is a key component of lower-mantle dynamics and evolution because it decelerates slab subduction3, accelerates plume ascent4 and inhibits chemical mixing5. However, because phase transitions of the main lower-mantle minerals do not occur at this depth, the origin of the viscosity jump remains unknown. Here we show that bridgmanite-enriched rocks in the deep lower mantle have a grain size that is more than one order of magnitude larger and a viscosity that is at least one order of magnitude higher than those of the overlying pyrolitic rocks. This contrast is sufficient to explain the mid-mantle viscosity jump1,2. The rapid growth in bridgmanite-enriched rocks at the early stage of the history of Earth and the resulting high viscosity account for their preservation against mantle convection5-7. The high Mg:Si ratio of the upper mantle relative to chondrites8, the anomalous 142Nd:144Nd, 182W:184W and 3He:4He isotopic ratios in hot-spot magmas9,10, the plume deflection4 and slab stagnation in the mid-mantle3 as well as the sparse observations of seismic anisotropy11,12 can be explained by the long-term preservation of bridgmanite-enriched rocks in the deep lower mantle as promoted by their fast grain growth.

Superhydrous aluminous silica phases as major water hosts in high-temperature lower mantle.

Water transported by subducted oceanic plates changes mineral and rock properties at high pressures and temperatures, affecting the dynamics and evolution of the Earth's interior. Although geochemical observations imply that water should be stored in the lower mantle, the limited amounts of water incorporation in pyrolitic lower-mantle minerals suggest that water in the lower mantle may be stored in the basaltic fragments of subducted slabs. Here, we performed multianvil experiments to investigate the stability and water solubility of aluminous stishovite and CaCl2-structured silica, referred to as poststishovite, in the SiO2-Al2O3-H2O systems at 24 to 28 GPa and 1,000 to 2,000 °C, representing the pressure-temperature conditions of cold subducting slabs to hot upwelling plumes in the top lower mantle. The results indicate that both alumina and water contents in these silica minerals increase with increasing temperature under hydrous conditions due to the strong Al3+-H+ charge coupling substitution, resulting in the storage of water up to 1.1 wt %. The increase of water solubility in these hydrous aluminous silica phases at high temperatures is opposite of that of other nominally anhydrous minerals and of the stability of the hydrous minerals. This feature prevents the releasing of water from the subducting slabs and enhances the transport water into the deep lower mantle, allowing significant amounts of water storage in the high-temperature lower mantle and circulating water between the upper mantle and the lower mantle through subduction and plume upwelling. The shallower depths of midmantle seismic scatterers than expected from the pure SiO2 stishovite-poststishovite transition pressure support this scenario.

Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B2 Dumbbells.

Transition metal borides are known due to their attractive mechanical, electronic, refractive, and other properties. A new class of rhenium borides was identified by synchrotron single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells between 26 and 75 GPa. Recoverable to ambient conditions, compounds rhenium triboride (ReB3) and rhenium tetraboride (ReB4) consist of close-packed single layers of rhenium atoms alternating with boron networks built from puckered hexagonal layers, which link short bonded (∼1.7 Å) axially oriented B2 dumbbells. The short and incompressible Re-B and B-B bonds oriented along the hexagonal c-axis contribute to low axial compressibility comparable with the linear compressibility of diamond. Sub-millimeter samples of ReB3 and ReB4 were synthesized in a large-volume press at pressures as low as 33 GPa and used for material characterization. Crystals of both compounds are metallic and hard (Vickers hardness, H V = 34(3) GPa). Geometrical, crystal-chemical, and theoretical analysis considerations suggest that potential ReB x compounds with x > 4 can be based on the same principle of structural organization as in ReB3 and ReB4 and possess similar mechanical and electronic properties.

Extreme conditions research using the large-volume press at the P61B endstation, PETRA III.

Penetrating, high-energy synchrotron X-rays are in strong demand, particularly for high-pressure research in physics, chemistry and geosciences, and for materials engineering research under less extreme conditions. A new high-energy wiggler beamline P61 has been constructed to meet this need at PETRA III in Hamburg, Germany. The first part of the paper offers an overview of the beamline front-end components and beam characteristics. The second part describes the performance of the instrumentation and the latest developments at the P61B endstation. Particular attention is given to the unprecedented high-energy photon flux delivered by the ten wigglers of the PETRA III storage ring and the challenges faced in harnessing this amount of flux and heat load in the beam. Furthermore, the distinctiveness of the world's first six-ram Hall-type large-volume press, Aster-15, at a synchrotron facility is described for research with synchrotron X-rays. Additionally, detection schemes, experimental strategies and preliminary data acquired using energy-dispersive X-ray diffraction and radiography techniques are presented.

Depressed 660-km discontinuity caused by akimotoite-bridgmanite transition.

The 660-kilometre seismic discontinuity is the boundary between the Earth's lower mantle and transition zone and is commonly interpreted as being due to the dissociation of ringwoodite to bridgmanite plus ferropericlase (post-spinel transition)1-3. A distinct feature of the 660-kilometre discontinuity is its depression to 750 kilometres beneath subduction zones4-10. However, in situ X-ray diffraction studies using multi-anvil techniques have demonstrated negative but gentle Clapeyron slopes (that is,  the ratio between pressure and temperature changes) of the post-spinel transition that do not allow a significant depression11-13. On the other hand, conventional high-pressure experiments face difficulties in accurate phase identification due to inevitable pressure changes during heating and the persistent presence of metastable phases1,3. Here we determine the post-spinel and akimotoite-bridgmanite transition boundaries by multi-anvil experiments using in situ X-ray diffraction, with the boundaries strictly based on the definition of phase equilibrium. The post-spinel boundary has almost no temperature dependence, whereas the akimotoite-bridgmanite transition has a very steep negative boundary slope at temperatures lower than ambient mantle geotherms. The large depressions of the 660-kilometre discontinuity in cold subduction zones are thus interpreted as the akimotoite-bridgmanite transition. The steep negative boundary of the akimotoite-bridgmanite transition will cause slab stagnation (a stalling of the slab's descent) due to significant upward buoyancy14,15.

A simplified rapid-quench multi-anvil technique.

We report a new rapid-quench technique for the Kawai-type multi-anvil press: several important improvements were made to our previous design. As a result, we are able to routinely quench melts with low glass-forming ability and form glasses. Owing to the use of 3D-printed parts to supply the coolant, the new design is easier to assemble and demonstrates better temperature stability and cooling rate. It was also found that the cooling rate is both pressure- and temperature-dependent. The cooling rate increases with increasing pressure from 6700 °C/s at 1 GPa to 8200 °C/s at 5.5 GPa and decreases with increasing temperature at a rate of 550 °C s-1/100 °C. Taking these dependencies into account, the new rapid-quench design produces more than 15% higher cooling rate compared to the previous design. Moreover, enhancing coolant circulation, which was achieved by using tapered inner anvils with holes, additionally increases the cooling rate by about 4%. As the structure of the rapid-quench assembly differs dramatically from other existing designs, pressure calibration and temperature distribution in the experimental cell and sample capsule were determined for the first time. It was found that the first 0.6 MN of press load is not used to generate pressure due to the hard tungsten components in the assembly. At the current state-of-the-art, it is possible to routinely reach a pressure of 9 GPa and a temperature of 2200 K with the temperature variation not exceeding 70 K within the sample capsule.

Synthesis of paracrystalline diamond.

Solids in nature can be generally classified into crystalline and non-crystalline states1-7, depending on whether long-range lattice periodicity is present in the material. The differentiation of the two states, however, could face fundamental challenges if the degree of long-range order in crystals is significantly reduced. Here we report a paracrystalline state of diamond that is distinct from either crystalline or amorphous diamond8-10. The paracrystalline diamond reported in this work, consisting of sub-nanometre-sized paracrystallites that possess a well-defined crystalline medium-range order up to a few atomic shells4,5,11-13, was synthesized in high-pressure high-temperature conditions (for example, 30 GPa and 1,600 K) employing face-centred cubic C60 as a precursor. The structural characteristics of the paracrystalline diamond were identified through a combination of X-ray diffraction, high-resolution transmission microscopy and advanced molecular dynamics simulation. The formation of paracrystalline diamond is a result of densely distributed nucleation sites developed in compressed C60 as well as pronounced second-nearest-neighbour short-range order in amorphous diamond due to strong sp3 bonding. The discovery of paracrystalline diamond adds an unusual diamond form to the enriched carbon family14-16, which exhibits distinguishing physical properties and can be furthered exploited to develop new materials. Furthermore, this work reveals the missing link in the length scale between amorphous and crystalline states across the structural landscape, having profound implications for recognizing complex structures arising from amorphous materials.

Asthenosphere dynamics based on the H2O dependence of element diffusivity in olivine.

The oceanic asthenosphere shows two enigmatic features: low viscosity and high electrical conductivity. Their origins gather wide attention, but remain unsolved. Recent self-diffusivity measurements as a function of H2O content in olivine demonstrated that the H2O-incorporation in olivine cannot soften the asthenosphere, but it enhances the ionic conductivity, and causes the high-conductivity anomaly.

Simultaneous generation of ultrahigh pressure and temperature to 50 GPa and 3300 K in multi-anvil apparatus.

We attempted to generate ultrahigh pressure and temperature simultaneously using a multi-anvil apparatus by combining the technologies of ultrahigh-pressure generation using sintered diamond (SD) anvils, which can reach 120 GPa, and ultrahigh-temperature generation using a boron-doped diamond (BDD) heater, which can reach 4000 K. Along with this strategy, we successfully generated a temperature of 3300 K and a pressure of above 50 GPa simultaneously. Although the high hardness of BDD significantly prevents high-pressure generation at low temperatures, its high-temperature softening allows for effective pressure generation at temperatures above 1200 K. High temperature also enhances high-pressure generation because of the thermal pressure. We expect to generate even higher pressure in the future by combining SD anvils and a BDD heater with advanced multi-anvil technology.

A strip-type boron-doped diamond heater synthesized by chemical vapor deposition for large-volume presses.

We have developed a high-pressure furnace assembly with a commercially available chemical-vapor-deposition synthesized boron-doped diamond heater consisting of four strips for large-volume multi-anvil presses (LVPs). This assembly successfully generated temperatures up to 2990 K at 15 GPa. It also has highly reproducible power-temperature relations, enabling us to estimate temperature from power reliably. It can be used for experiments above 9 GPa and is particularly useful for synchrotron x-ray experiments because of the x-ray transparency. It is also competitive in price. This technique is, thus, practical in various LVP experiments in the diamond-stability field.

A rapid-quench technique for multi-anvil high-pressure-temperature experiments.

In order to extend the pressure and compositional range where silicate melts can be quenched to form glass in a multi-anvil high-pressure and high-temperature apparatus, a rapid-quench technique, which includes an external cooling system and a low thermal-inertia assembly, was developed. This technique allows much higher cooling rates (6000-7000 °C/s) than regular piston-cylinder (130 °C/s) apparatus and multi-anvil (650 °C/s) apparatus, which are widely used in solid Earth science. Such high cooling rates are critical to avoid unwanted changes in a sample, such as melt crystallization and volatile loss, during quenching.

Discovery of Ternary Silicon Titanium Nitride with Spinel-Type Structure.

Here we report on the discovery of a ternary silicon titanium nitride with the general composition (Si1-x,Tix)3N4 with x = 0 < x < 1 and spinel-type crystal structure. The novel nitride is formed from an amorphous silicon titanium nitride (SiTiN) precursor under high-pressure/high-temperature conditions in a large volume high-pressure device. Under the conditions of 15-20 GPa and 1800-2000 °C, spinel-type γ-Si3N4 and rock salt-type c-TiN are formed. In addition, crystals of the discovered nano-sized ternary phase (Si1-x,Tix)3N4 embedded in γ-Si3N4 are identified. The ternary compound is formed due to kinetically-controlled synthesis conditions and is analyzed to exhibit the spinel-type structure with ca. 8 atom% of Ti. The Ti atoms occur in both Ti3+ and Ti4+ oxidation states and are located on the Si sites. The ternary nano-crystals have to be described as (Si,Ti)3N4 with N-vacancies resulting in the general composition (Si4+1-x Ti4+x-δTi3+δ)3N4-δ.

A Novel High-Pressure Tin Oxynitride Sn2 N2 O.

We report the first oxynitride of tin, Sn2 N2 O (SNO), exhibiting a Rh2 S3 -type crystal structure with space group Pbcn. All Sn atoms are in six-fold coordination, in contrast to Si in silicon oxynitride (Si2 N2 O) and Ge in the isostructural germanium oxynitride (Ge2 N2 O), which appear in four-fold coordination. SNO was synthesized at 20 GPa and 1200-1500 °C in a large volume press. The recovered samples were characterized by synchrotron powder X-ray diffraction and single-crystal electron diffraction in the TEM using the automated diffraction tomography (ADT) technique. The isothermal bulk modulus was determined as Bo =193(5) GPa by using in-situ synchrotron X-ray diffraction in a diamond anvil cell. The structure model is supported by DFT calculations. The enthalpy of formation, the bulk modulus, and the band structure have been calculated.

Pressure-Induced Emission Enhancement and Multicolor Emission for 1,2,3,4-Tetraphenyl-1,3-cyclopentadiene: Controlled Structure Evolution.

Mechanoresponsive luminescent (MRL) materials have attracted considerable attention because of their potential applications in mechanical sensors, memory chips, and security inks; MRL materials possessing high efficiency and multicolor emission qualities are especially interesting. In this Letter, we found 1,2,3,4-tetraphenyl-1,3-cyclopentadiene (TPC) crystal exhibited both pressure-induced emission enhancement (PIEE) and multicolor behavior. In addition, infrared spectroscopy analysis indicated that the ring-opening reaction of the phenyl ring occurred when pressure was beyond 24.7 GPa. The reaction was promoted from 24.7 to 35.9 GPa, which resulted in the redder irreversible color change for the sample released from 35.9 GPa than from 24.7 GPa. The results regarding the mechanoresponsive behavior of TPC offered a deep insight into PIEE and multicolor properties from the structural point of view and inspired the idea of capturing different colors by hydrostatic pressure, which will facilitate the design of and search for high-performance MRL materials.

High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re2(N2)(N)2 stable at ambient conditions.

High-pressure synthesis in diamond anvil cells can yield unique compounds with advanced properties, but often they are either unrecoverable at ambient conditions or produced in quantity insufficient for properties characterization. Here we report the synthesis of metallic, ultraincompressible (K0 = 428(10) GPa), and very hard (nanoindentation hardness 36.7(8) GPa) rhenium nitride pernitride Re2(N2)(N)2. Unlike known transition metals pernitrides Re2(N2)(N)2 contains both pernitride N24- and discrete N3- anions, which explains its exceptional properties. Re2(N2)(N)2 can be obtained via a reaction between rhenium and nitrogen in a diamond anvil cell at pressures from 40 to 90 GPa and is recoverable at ambient conditions. We develop a route to scale up its synthesis through a reaction between rhenium and ammonium azide, NH4N3, in a large-volume press at 33 GPa. Although metallic bonding is typically seen incompatible with intrinsic hardness, Re2(N2)(N)2 turned to be at a threshold for superhard materials.

Complete agreement of the post-spinel transition with the 660-km seismic discontinuity.

The 660-km seismic discontinuity, which is a significant structure in the Earth's mantle, is generally interpreted as the post-spinel transition, as indicated by the decomposition of ringwoodite to bridgmanite + ferropericlase. All precise high-pressure and high-temperature experiments nevertheless report 0.5-2 GPa lower transition pressures than those expected at the discontinuity depth (i.e. 23.4 GPa). These results are inconsistent with the post-spinel transition hypothesis and, therefore, do not support widely accepted models of mantle composition such as the pyrolite and CI chondrite models. Here, we present new experimental data showing post-spinel transition pressures in complete agreement with the 660-km discontinuity depth obtained by high-resolution in situ X-ray diffraction in a large-volume high-pressure apparatus with a tightly controlled sample pressure. These data affirm the applicability of the prevailing mantle models. We infer that the apparently lower pressures reported by previous studies are experimental artefacts due to the pressure drop upon heating. The present results indicate the necessity of reinvestigating the position of mantle mineral phase boundaries previously obtained by in situ X-ray diffraction in high-pressure-temperature apparatuses.

A nearly water-saturated mantle transition zone inferred from mineral viscosity.

An open question for solid-earth scientists is the amount of water in Earth's interior. The uppermost mantle and lower mantle contain little water because their dominant minerals, olivine and bridgmanite, have limited water storage capacity. In contrast, the mantle transition zone (MTZ) at a depth of 410 to 660 km is considered to be a potential water reservoir because its dominant minerals, wadsleyite and ringwoodite, can contain large amounts of water [up to 3 weight % (wt %)]. However, the actual amount of water in the MTZ is unknown. Given that water incorporated into mantle minerals can lower their viscosity, we evaluate the water content of the MTZ by measuring dislocation mobility, a property that is inversely proportional to viscosity, as a function of temperature and water content in ringwoodite and bridgmanite. We find that dislocation mobility in bridgmanite is faster by two orders of magnitude than in anhydrous ringwoodite but 1.5 orders of magnitude slower than in water-saturated ringwoodite. To fit the observed mantle viscosity profiles, ringwoodite in the MTZ should contain 1 to 2 wt % water. The MTZ should thus be nearly water-saturated globally.

Pressure dependence of transverse acoustic phonon energy in ferropericlase across the spin transition.

We investigated transverse acoustic (TA) phonons in iron-bearing magnesium oxide (ferropericlase) up to 56 GPa using inelastic x-ray scattering (IXS). The results show that the energy of the TA phonon far from the Brillouin zone center suddenly increases with increasing pressure above the spin transition pressure of ferropericlase. Ab initio calculations revealed that the TA phonon energy far from the Brillouin zone center is higher in the low-spin state than in the high spin state; that the TA phonon energy depend weakly on pressure; and that the energy gap between the TA and the lowest-energy-optic phonons is much narrower in the low-spin state than in the high-spin state. This allows us to conclude that the anomalous behavior of the TA mode in the present experiments is the result of gap narrowing due to the spin transition and explains contradictory results in previous experimental studies.