Investigation of the molecular causes underlying physical abnormalities in Diamond-Blackfan anemia patients with RPL5 haploinsufficiency.

Diamond-Blackfan anemia (DBA) is a genetic disorder caused by mutations in genes encoding ribosomal proteins and characterized by erythroid aplasia and various physical abnormalities. Although accumulating evidence suggests that defective ribosome biogenesis leads to p53-mediated apoptosis in erythroid progenitor cells, little is known regarding the underlying causes of the physical abnormalities. In this study, we established induced pluripotent stem cells from a DBA patient with RPL5 haploinsufficiency. These cells retained the ability to differentiate into osteoblasts and chondrocytes. However, RPL5 haploinsufficiency impaired the production of mucins and increased apoptosis in differentiated chondrocytes. Increased expression of the pro-apoptotic genes BAX and CASP9 further indicated that RPL5 haploinsufficiency triggered p53-mediated apoptosis in chondrocytes. Murine double minute 2 (MDM2), the primary negative regulator of p53, plays a crucial role in erythroid aplasia in DBA patient. We found the phosphorylation level of MDM2 was significantly decreased in RPL5 haploinsufficient chondrocytes. In stark contrast, we found no evidence that RPL5 haploinsufficiency impaired osteogenesis. Collectively, our data support a model in which RPL5 haploinsufficiency specifically induces p53-mediated apoptosis in chondrocytes through MDM2 inhibition, which leads to physical abnormalities in DBA patients.

Camouflage Treatment for Skeletal Maxillary Protrusion and Lateral Deviation with Classic-Type Ehlers-Danlos Syndrome.

We herein report the case of a 19-year-old female with a transverse discrepancy, skeletal Class II malocclusion, severe crowding with concerns of classic-type Ehlers-Danlos syndrome (EDS), aesthetics problems and functional problems. The main characteristics of classic EDS are loose-jointedness and fragile, easily bruised skin that heals with peculiar "cigarette-paper" scars. The anteroposterior and transverse skeletal discrepancies can generally be resolved by maxilla repositioning and mandibular advancement surgery following pre-surgical orthodontic treatment. However, this patient was treated with orthodontic camouflage but not orthognathic surgery because of the risks of skin bruising, poor healing and a temporomandibular disorder. A satisfactory dental appearance and occlusion were achieved after camouflage treatment with orthodontic anchor screws and the use of Class II elastics, including the preservation of the stomatognathic functions. Acceptable occlusion and dentition were maintained after a two-year retention period. This treatment strategy of orthodontic camouflage using temporary anchorage, such as anchor screws and Class II elastics, may be a viable treatment option for skeletal malocclusion patients with EDS.

Nonsurgical orthodontic treatment of a hypodivergent adult patient with bilateral posterior scissors bite and excessive overjet.

This report illustrates successful nonsurgical orthodontic treatment of a hypodivergent adult patient with bilateral posterior scissors bite (Brodie bite) and excessive overjet. A 26-year-old woman primarily reported maxillary incisor protrusion. She was diagnosed with Class ll division 1 malocclusion with skeletal Class I, short face, low mandibular plane angle and bilateral posterior scissors bite. A lingual arch with anterior bite block and posterior miniscrews with preadjusted edgewise appliances were used to improve the bilateral scissors bite. After achieving molar occlusion, the maxillary first premolars were extracted, and six miniscrews were used to improve the anterior-posterior and vertical discrepancies. After active treatment for 56 months, the convex facial profile with excessively protruded lips was improved and good interdigitation with ideal incisor relationship was achieved. Additionally, the irregular movements of the incisal path and the bilateral condyles during lateral excursion were improved. At 13 months of retention, a satisfactory facial profile, occlusion, and jaw movements were maintained. The treatment results suggest that miniscrews and fixed bite blocks were effective and efficient to facilitate correction of the bilateral scissors bite, excessive overjet, and vertical relationship correction in this nonsurgical orthodontic treatment.

The different effects of intraoral vertical ramus osteotomy (IVRO) and sagittal split ramus osteotomy (SSRO) on mandibular border movement.

OBJECTIVES: This study investigated the different effects of intraoral vertical ramus osteotomy (IVRO) and sagittal split ramus osteotomy (SSRO) on mandibular border movement. METHODS: The participants included 22 patients receiving IVRO and 22 patients receiving SSRO who were treated at Okayama University Hospital. Their mandibular border movement was evaluated in three dimensions with 6° of freedom using an optical recording system. RESULTS: A strong correlation between condylar and lower incisor movement was observed during maximum jaw protrusion and laterotrusion. Significant improvements in condylar and lower incisor movement were detected after orthognathic surgery during maximum jaw protrusion and laterotrusion in the IVRO group and during maximum jaw protrusion in the SSRO group. DISCUSSION: IVRO likely achieves greater improvement in jaw movement than SSRO. Therefore, the application of IVRO could be considered in the treatment of patients with jaw deformities featuring temporomandibular joint problems.

Changes in the distributions of fluorine-18-labelled fluoro-2-deoxy-d-glucose accumulation into tongue-related muscles after dissection in patients with tongue cancer.

OBJECTIVES: To elucidate the changes in the distributions of fluorine-18-labelled fluoro-2-deoxy-d-glucose (18F-FDG) accumulation in the tongue muscles of patients following four kinds of surgical operations for tongue cancers. METHODS: The changes in the distributions of 18F-FDG accumulations in the tongue muscles on positron emission tomography (PET)-CT, in association with imaging findings on CT and MRI, were retrospectively analyzed before and after four kinds of surgical operations for 50 patients with tongue cancers. RESULTS: 18F-FDG-PET-positive areas appeared at the back of the intrinsic muscles of the tongue after invasive surgery for tongue cancers despite the absence of abnormal findings on CT and MRI. A correlation between the standardized uptake value maximum of 18F-FDG in the intrinsic muscles and the degree of invasiveness of the surgical procedures for tongue cancers (r = 0.539, p < 0.01) was found. CONCLUSIONS: It is important to pay attention to the changes in 18F-FDG distributions in the intrinsic muscles of the tongue before and after invasive surgery despite the absence of abnormal findings on CT and MRI when evaluating the tongue on 18F-FDG-PET.

Comparative evaluation of treatment outcomes between temporary anchorage devices and Class III elastics in Class III malocclusions.

INTRODUCTION: Our objective was to elucidate the differences in treatment outcomes caused by the different mechanics of temporary anchorage devices (TADs) and Class III elastics in patients with Class III malocclusions. METHODS: Records of 23 patients with Angle Class III malocclusion were selected retrospectively. All had been treated with nonextraction comprehensive orthodontic treatment; 11 were treated with TADs and 12 with Class III elastics. Pretreatment and posttreatment lateral cephalograms were used for evaluation of the treatment outcomes. A paired t test and a Student t test were used for statistical analysis. RESULTS: In both groups, proper overjet and Class I molar relationships were achieved, and the occlusal plane was rotated counterclockwise. In the elastics group, distal tipping of the mandibular molars, extrusion of the mandibular incisors and maxillary molars, clockwise rotation of the mandibular plane angle, and increased ANB angle were observed. In the TADs group, distal tipping and intrusion of the mandibular molars, bodily movement of the mandibular incisors, and reduced mandibular plane angle were observed. CONCLUSIONS: In nonextraction treatment for Class III malocclusions, the mandibular plane angle was increased in the elastics group, whereas it was decreased in TADs group. Thus, we suggest that Class III elastics are preferred for low-angle, short-face patients, whereas TADs are preferred for high-angle, long-face patients.

A Single-center, Open-label, Randomized Controlled Clinical Trial to Evaluate the Efficacy and Safety of the Indirect Bonding Technique.

Although accurate bracket placement is essential for orthodontic treatment, many practitioners apply brackets indiscriminately with direct or indirect bonding techniques. Nonetheless, there have been few prospective clinical comparisons of the 2 techniques. We will therefore conduct a single-center, randomized control trial in 100 patients aged 12 years and diagnosed with malocclusion. All patients will receive orthodontic treatment using brackets with direct or indirect bonding techniques. The primary endpoints will be the total treatment time, occlusal index, discomfort at bonding, and oral hygiene after bonding. This study will clarify whether indirect bonding can improve the efficiency of orthodontic treatment.

Alternation in the gap-junctional intercellular communication capacity during the maturation of osteocytes in the embryonic chick calvaria.

INTRODUCTION: The intercellular network of cell-cell communication among osteocytes is mediated by gap junctions. Gap junctional intercellular communication (GJIC) is thought to play an important role in the integration and synchronization of bone remodeling. To further understand the mechanism of bone development it is important to quantify the difference in the GJIC capacity of young and developmentally mature osteocytes. MATERIALS AND METHODS: We first established an embryonic chick calvaria growth model to show the growth of the calvaria in embryos at 13 to 21days of age. We then applied a fluorescence recovery after photobleaching (FRAP) technique to compare the difference in the GJIC capacity of young osteocytes with that of developmentally mature osteocytes. Finally, we quantified the dye (Calcein) diffusion from the FRAP data using a mathematic model of simple diffusion which was also used to identify simple diffusion GJIC pattern cells (fitted model) and accelerated diffusion GJIC pattern cells (non-fitted model). RESULTS: The relationship between the longest medial-lateral length of the calvaria (frontal bone) and the embryonic age fit a logarithmic growth model: length=5.144×ln(day)-11.340. The morphometric data during osteocyte differentiation showed that the cellular body becomes more spindle-shaped and that the cell body volume decreased by approximately 22% with an increase in the length of the processes between the cells. However, there were no significant differences in the cellular body surface area or in the distance between the mass centres of the cells. The dye-displacement rate in young osteocytes was significantly higher than that in developmentally mature osteocytes: dye displacement only occurred in 26.88% of the developmentally mature osteocytes, while it occurred in 64.38% of the young osteocytes. Additionally, in all recovered osteocytes, 36% of the developmentally mature osteocytes comprised non-fitted model cells while 53.19% of the young osteocytes were the non-fitted model, which indicates the active transduction of dye molecules. However, there were no statistically significant differences between the young and developmentally mature osteocytes with regard to the diffusion coefficient, permeability coefficient, or permeance of the osteocyte processes, which were 3.93±3.77 (×10(-8)cm(2)/s), 5.12±4.56 (×10(-5)cm(2)/s) and 2.99±2.47 (×10(-13)cm(2)/s) (mean±SD), respectively. CONCLUSIONS: These experiments comprehensively quantified the GJIC capacity in the embryonic chick calvaria and indicated that the cell-cell communication capacity of the osteocytes in the embryonic chick calvaria was related to their development.

Collagen production of osteoblasts revealed by ultra-high voltage electron microscopy.

In the bone, collagen fibrils form a lamellar structure called the "twisted plywood-like model." Because of this unique structure, bone can withstand various mechanical stresses. However, the formation of this structure has not been elucidated because of the difficulty of observing the collagen fibril production of the osteoblasts via currently available methods. This is because the formation occurs in the very limited space between the osteoblast layer and bone matrix. In this study, we used ultra-high-voltage electron microscopy (UHVEM) to observe collagen fibril production three-dimensionally. UHVEM has 3-MV acceleration voltage and enables us to use thicker sections. We observed collagen fibrils that were beneath the cell membrane of osteoblasts elongated to the outside of the cell. We also observed that osteoblasts produced collagen fibrils with polarity. By using AVIZO software, we observed collagen fibrils produced by osteoblasts along the contour of the osteoblasts toward the bone matrix area. Immediately after being released from the cell, the fibrils run randomly and sparsely. But as they recede from the osteoblast, the fibrils began to run parallel to the definite direction and became thick, and we observed a periodical stripe at that area. Furthermore, we also observed membrane structures wrapped around filamentous structures inside the osteoblasts. The filamentous structures had densities similar to the collagen fibrils and a columnar form and diameter. Our results suggested that collagen fibrils run parallel and thickly, which may be related to the lateral movement of the osteoblasts. UHVEM is a powerful tool for observing collagen fibril production.

Topical application of lithium chloride on the pulp induces dentin regeneration.

We herein describe a novel procedure for dentin regeneration that mimics the biological processes of tooth development in nature. The canonical Wnt signaling pathway is an important regulator of the Dentin sialophosphoprotein (Dspp) expression. Our approach mimics the biological processes underlying tooth development in nature and focuses on the activation of canonical Wnt signaling to trigger the natural process of dentinogenesis. The coronal portion of the dentin and the underlying pulp was removed from the first molars. We applied lithium chloride (LiCl), an activator of canonical Wnt signaling, on the amputated pulp surface to achieve transdifferentiation toward odontoblasts from the surrounding pulpal cells. MicroCT and microscopic analyses demonstrated that the topical application of LiCl induced dentin repair, including the formation of a complete dentin bridge. LiCl-induced dentin is a tubular dentin in which the pulp cells are not embedded within the matrix, as in primary dentin. In contrast, a dentin bridge was not induced in the control group treated with pulp capping with material carriers alone, although osteodentin without tubular formation was induced at a comparatively deeper position from the pulp exposure site. We also evaluated the influence of LiCl on differentiation toward odontoblasts in vitro. In the mDP odontoblast cell line, LiCl activated the mRNA expression of Dspp, Axin2 and Kallikrein 4 (Klk4) and downregulated the Osteopontin (Osp) expression. These results provide a scientific basis for the biomimetic regeneration of dentin using LiCl as a new capping material to activate dentine regeneration.

Runx/Cbfb signaling regulates postnatal development of granular convoluted tubule in the mouse submandibular gland.

BACKGROUND: The rodent salivary gland is not fully developed at birth and the cellular definitive differentiation takes place postnatally. However, little is known about its molecular mechanism. RESULTS: Here we provide the loss-of-function genetic evidence that Runx signaling affects postnatal development of the submandibular gland (SMG). Core binding factor ß (Cbfb) is a cotranscription factor which forms a heterodimer with Runx proteins. Cbfb was specifically expressed in the duct epithelium, specifically in the SMG. Epithelial Cbfb deficiency resulted in decrease in the size of the SMG and in the saliva secretion on postnatal day 35. The Cbfb mutant SMG specifically exhibited involution of the granular convoluted tubules (GCT), with a down-regulated expression of its marker genes, such as Klk1, Ngf, and Egf. The induction of GCT is under the control of androgens, and the Cbfb mutant SMG demonstrated down-regulated expression of Crisp3, an androgen-dependent transcript. Because the circulating testosterone or tissue dihydrotestosterone levels were not affected in the Cbfb mutants, it appears that Runx/Cbfb signaling regulate androgen receptor pathway, but does not affect the circulating testosterone levels or the enzymatic conversion to DHT. CONCLUSIONS: Runx signaling is important in the postnatal development of androgen-dependent GCT in the SMG.

Isolation and characterization of SSEA-4-positive subpopulation of human deciduous dental pulp cells.

OBJECTIVES: It is well accepted that stage-specific embryonic antigen (SSEA)-4 is an antigen that is useful to isolate adult stem cells analogous to embryonic stem cells. Therefore, in the present study, we investigated whether SSEA-4 can also be used as a marker to identify human deciduous dental pulp (D-DP) stem cells. MATERIALS AND METHODS: Intact deciduous teeth were collected from healthy patients who were undergoing orthodontic treatment at Okayama University Hospital. Immunofluorescence analysis, flow cytometric analysis, and multilineage differentiation assay were performed to characterize SSEA-4+ D-DP cells. RESULTS: The D-DP cells had the characteristics of mesenchymal stem cells (MSCs), namely plastic adherence, specific surface antigen expression, and multipotent differentiation potential. SSEA-4 expression was detected in D-DP cells in vitro and ex vivo samples. A flow cytometric analysis demonstrated that 21.2 % of the D-DP cells were positive for SSEA-4. The SSEA-4+ clonal D-DP cells showed multilineage differentiation potential toward adipocytes, osteoblasts, and chondrocytes in vitro. In fact, 26.1 % (6/23) of the SSEA-4+ clonal D-DP cells showed adipogenic potential, 91.3 % (21/23) showed osteogenic potential, 91.3 % (21/23) showed chondrogenic potential, and 87.0 % (20/23) showed both osteogenic and chondrogenic potential. CONCLUSIONS: Thus, the majority of SSEA-4+ D-DP cells had the potential for multilineage differentiation. Hence, SSEA-4 appears to be a specific marker that can be used to identify D-DP stem cells. CLINICAL RELEVANCE: SSEA-4+ D-DP cells appear to be a promising source of stem cells for regenerative therapy.

Class II malocclusion with complex problems treated with a novel combination of lingual orthodontic appliances and lingual arches.

This case report describes a novel method of combining lingual appliances and lingual arches to control horizontal problems. The patient, who was 25 years of age at her first visit to our hospital with a chief complaint of crooked anterior teeth, was diagnosed with skeletal Class II and Angle Class II malocclusion with anterior deep bite, lateral open bite, premolar crossbite, and severe crowding in both arches. She was treated with premolar extractions and temporary anchorage devices. Conventionally, it is ideal to use labial brackets simultaneously with appliances, such as a lingual arch, a quad-helix, or a rapid expansion appliance, in patients with complex problems requiring horizontal, anteroposterior, and vertical control; however, this patient strongly requested orthodontic treatment with lingual appliances. A limitation of lingual appliances is that they cannot be used with other conventional appliances. In this report, we present the successful orthodontic treatment of a complex problem using modified lingual appliances that enabled combined use of a conventional lingual arch.

Relationship between orthodontic expertise and perception of need for orthodontic treatment for mandibular protrusion in Japan.

The aims of this study were to investigate how the Peer Assessment Rating (PAR index) predicts the perceived need for orthodontic treatment of mandibular protrusion in Japanese subjects, and to elucidate whether the perceived need for treatment was affected by the raters' orthodontic expertise. The subjects were 110 dental students and 32 orthodontists. We showed them casts of 10 untreated mandibular protrusion cases and gave them a questionnaire in which they had to describe their perceptions of the orthodontic treatment needs using a 10-point visual analog scale (VAS). The PAR index was used for cast evaluation. The PAR index scores showed significant correlations with the VAS scores. In casts with a low PAR score, there were no differences in the VAS scores between orthodontists and students. In casts with a PAR score greater than 23, the orthodontists perceived a significantly greater treatment need than did the students;for scores of 22, 28, and 29, students who had received orthodontic treatment themselves were more likely to perceive the treatment need. The PAR index is a good clinical predictor for assessing the perceived treatment needs for mandibular protrusion. Perception of the need for orthodontic treatment for mandibular protrusion depended on the degree of orthodontic expertise in Japanese subjects.

The influence of craniofacial morphology on mandibular border movements.

Although they are widely used as diagnostic signs of temporomandibular disorders, mandibular border movements reflect not only condylar movement, but also other factors. In the present study, the authors investigated the effect of craniofacial morphology on three different mandibular border movements: maximum jaw opening, maximum jaw protrusion, and maximum jaw laterotrusion. One hundred female subjects were selected from outpatients visiting the orthodontic clinic of Okayama University Hospital. The mandibular border movements were measured using an optical recording system in three dimensions as six degrees of freedom. The craniofacial morphology was evaluated using lateral cephalograms. The results suggest that craniofacial morphology had different influences on each mandibular border movement. In particular, during maximum jaw laterotrusion, lower incisor movement strongly reflected condylar movement, and the influence of craniofacial morphology on mandibular border movement was minimal. Therefore, lower incisor movement during maximum jaw laterotrusion appears suitable to evaluate condylar movement.

The early mouse 3D osteocyte network in the presence and absence of mechanical loading.

Osteocytes are considered to act as mechanosensory cells in bone. They form a functional synctia in which their processes become interconnected to constitute a three-dimensional (3D) network. Previous studies reported that in mice, the two-dimensional osteocyte network becomes progressively more regular as they grow, although the key factors governing the arrangement of the osteocyte network during bone growth remain unknown. In this study, we characterized the 3D formation of the osteocyte network during bone growth. Morphological skeletal changes have been reported to occur in response to mechanical loading and unloading. In order to evaluate the effect of mechanical unloading on osteocyte network formation, we subjected newborn mice to sciatic neurectomy in order to immobilize their left hind limb as an unloading model. The osteocyte network was visualized by staining osteocyte cell bodies and processes with fluorescently labeled phalloidin. First, we compared the osteocyte network in the femora of embryonic and 6-week-old mice in order to understand the morphological changes that occur with normal growth and mechanical loading. In embryonic mice, the osteocyte network in the femur cortical bone displayed a random cell body distribution, non-directional orientation of cell processes, and irregularly shaped cells. In 6-week-old mice, the 3D network contained spindle-shaped osteocytes, which were arranged parallel to the longitudinal axis of the femur. In addition, more and longer cell processes radiated from each osteocyte. Second, we compared the cortical osteocyte networks of 6-week-old mice that had or had not undergone sciatic neurectomy in order to evaluate the effect of unloading on osteocyte network formation. The osteocyte network formation in both cortical bone and cancellous bone was affected by mechanical loading. However, there were differences in the extent of network formation between cortical bone and cancellous bone in response to mechanical loading with regard to the orientation, nuclear shape and branch formation.

Ex vivo real-time observation of Ca(2+) signaling in living bone in response to shear stress applied on the bone surface.

Bone cells respond to mechanical stimuli by producing a variety of biological signals, and one of the earliest events is intracellular calcium ([Ca(2+)](i)) mobilization. Our recently developed ex vivo live [Ca(2+)](i) imaging system revealed that bone cells in intact bone explants showed autonomous [Ca(2+)](i) oscillations, and osteocytes specifically modulated these oscillations through gap junctions. However, the behavior and connectivity of the [Ca(2+)](i) signaling networks in mechanotransduction have not been investigated in intact bone. We herein introduce a novel fluid-flow platform for probing cellular signaling networks in live intact bone, which allows the application of capillary-driven flow just on the bone explant surface while performing real-time fluorogenic monitoring of the [Ca(2+)](i) changes. In response to the flow, the percentage of responsive cells was increased in both osteoblasts and osteocytes, together with upregulation of c-fos expression in the explants. However, enhancement of the peak relative fluorescence intensity was not evident. Treatment with 18 α-GA, a reversible inhibitor of gap junction, significantly blocked the [Ca(2+)](i) responsiveness in osteocytes without exerting any major effect in osteoblasts. On the contrary, such treatment significantly decreased the flow-activated oscillatory response frequency in both osteoblasts and osteocytes. The stretch-activated membrane channel, when blocked by Gd(3+), is less affected in the flow-induced [Ca(2+)](i) response. These findings indicated that flow-induced mechanical stimuli accompanied the activation of the autonomous [Ca(2+)](i) oscillations in both osteoblasts and osteocytes via gap junction-mediated cell-cell communication and hemichannel. Although how the bone sense the mechanical stimuli in vivo still needs to be elucidated, the present study suggests that cell-cell signaling via augmented gap junction and hemichannel-mediated [Ca(2+)](i) mobilization could be involved as an early signaling event in mechanotransduction.

Roles of heparan sulfate sulfation in dentinogenesis.

Cell surface heparan sulfate (HS) is an essential regulator of cell signaling and development. HS traps signaling molecules, like Wnt in the glycosaminoglycan side chains of HS proteoglycans (HSPGs), and regulates their functions. Endosulfatases Sulf1 and Sulf2 are secreted at the cell surface to selectively remove 6-O-sulfate groups from HSPGs, thereby modifying the affinity of cell surface HSPGs for its ligands. This study provides molecular evidence for the functional roles of HSPG sulfation and desulfation in dentinogenesis. We show that odontogenic cells are highly sulfated on the cell surface and become desulfated during their differentiation to odontoblasts, which produce tooth dentin. Sulf1/Sulf2 double null mutant mice exhibit a thin dentin matrix and short roots combined with reduced expression of dentin sialophosphoprotein (Dspp) mRNA, encoding a dentin-specific extracellular matrix precursor protein, whereas single Sulf mutants do not show such defective phenotypes. In odontoblast cell lines, Dspp mRNA expression is potentiated by the activation of the Wnt canonical signaling pathway. In addition, pharmacological interference with HS sulfation promotes Dspp mRNA expression through activation of Wnt signaling. On the contrary, the silencing of Sulf suppresses the Wnt signaling pathway and subsequently Dspp mRNA expression. We also show that Wnt10a protein binds to cell surface HSPGs in odontoblasts, and interference with HS sulfation decreases the binding affinity of Wnt10a for HSPGs, which facilitates the binding of Wnt10a to its receptor and potentiates the Wnt signaling pathway, thereby up-regulating Dspp mRNA expression. These results demonstrate that Sulf-mediated desulfation of cellular HSPGs is an important modification that is critical for the activation of the Wnt signaling in odontoblasts and for production of the dentin matrix.

In situ imaging of the autonomous intracellular Ca(2+) oscillations of osteoblasts and osteocytes in bone.

Bone cells form a complex three-dimensional network consisting of osteoblasts and osteocytes embedded in a mineralized extracellular matrix. Ca(2+) acts as a ubiquitous secondary messenger in various physiological cellular processes and transduces numerous signals to the cell interior and between cells. However, the intracellular Ca(2+) dynamics of bone cells have not been evaluated in living bone. In the present study, we developed a novel ex-vivo live Ca(2+) imaging system that allows the dynamic intracellular Ca(2+) concentration ([Ca(2+)](i)) responses of intact chick calvaria explants to be observed without damaging the bone network. Our live imaging analysis revealed for the first time that both osteoblasts and osteocytes display repetitive and autonomic [Ca(2+)](i) oscillations ex vivo. Thapsigargin, an inhibitor of the endoplasmic reticulum that induces the emptying of intracellular Ca(2+) stores, abolished these [Ca(2+)](i) responses in both osteoblasts and osteocytes, indicating that Ca(2+) release from intracellular stores plays a key role in the [Ca(2+)](i) oscillations of these bone cells in intact bone explants. Another possible [Ca(2+)](i) transient system to be considered is gap junctional communication through which Ca(2+) and other messenger molecules move, at least in part, across cell-cell junctions; therefore, we also investigated the role of gap junctions in the maintenance of the autonomic [Ca(2+)](i) oscillations observed in the intact bone. Treatment with three distinct gap junction inhibitors, 18α-glycyrrhetinic acid, oleamide, and octanol, significantly reduced the proportion of responsive osteocytes, indicating that gap junctions are important for the maintenance of [Ca(2+)](i) oscillations in osteocytes, but less in osteoblasts. Taken together, we found that the bone cells in intact bone explants showed autonomous [Ca(2+)](i) oscillations that required the release of intracellular Ca(2+) stores. In addition, osteocytes specifically modulated these oscillations via cell-cell communication through gap junctions, which maintains the observed [Ca(2+)](i) oscillations of bone cells.

Stage-specific embryonic antigen-4 identifies human dental pulp stem cells.

Embryonic stem cell-associated antigens are expressed in a variety of adult stem cells as well as embryonic stem cells. In the present study, we investigated whether stage-specific embryonic antigen (SSEA)-4 can be used to isolate dental pulp (DP) stem cells. DP cells showed plastic adherence, specific surface antigen expression, and multipotent differentiation potential, similar to mesenchymal stem cells (MSC). SSEA-4+ cells were found in cultured DP cells in vitro as well as in DP tissue in vivo. Flow cytometric analysis demonstrated that 45.5% of the DP cells were SSEA-4+. When the DP cells were cultured in the presence of all-trans-retinoic acid, marked downregulation of SSEA-3 and SSEA-4 and the upregulation of SSEA-1 were observed. SSEA-4+ DP cells showed a greater telomere length and a higher growth rate compared to ungated and SSEA-4- cells. A clonal assay demonstrated that 65.5% of the SSEA-4+ DP cells had osteogenic potential, and the SSEA-4+ clonal DP cells showed multilineage differentiation potential toward osteoblasts, chondrocytes, and neurons in vitro. In addition, the SSEA-4+ DP cells had the capacity to form ectopic bone in vivo. Thus, our results suggest that SSEA-4 is a specific cell surface antigen that can be used to identify DP stem cells.