RESUMEN
In this study, we synthesized PVA-g-poly(AMPS) nanogels with the aim of enhancing the solubility and dissolution of ticagrelor (TGR). Ticagrelor, a noncompetitive, reversible P2Y12 receptor antagonist, is prescribed to treat acute coronary syndrome. Ticagrelor has restricted oral bioavailability (≈36%) because of its poor solubility and permeability. The free radical polymerization methodology was employed to synthesize nanogels with varied concentrations of poly(vinyl alcohol) (polymer), 2-acrylamido-2-methylpropanesulfonic acid (monomer), and N,N-methylene bis(acrylamide) (crosslinker). The prepared nanogels were analyzed by swelling studies, % drug entrapment efficiency (DEE), solubility studies, in vitro drug release studies, zeta sizer, Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The optimized formulation (PA5) revealed a particle size of 45.86 nm, with a polydispersity index (PDI) of 0.41 and a %DEE of 85.1%. FTIR spectroscopy, XRD, and SEM confirmed the formation of crosslinked nanogels with amorphous and porous structures, and TGA/DSC proved their thermal stability. In vitro dissolution studies showed 99.91% drug release, and the ticagrelor solubility from the synthesized formulations was significantly improved up to 8.2-fold. All formulations followed the Korsmeyer-Peppas model with the Fickian diffusion as the release mechanism. The toxicity studies carried out on rats and the MTT assay on the Caco-2 cell line validated the biocompatibility of the nanogel formulations. The outcomes of the current study led to the conclusion that the PVA-g-poly(AMPS) nanogels synthesized by us could be used as dedicated pharmaceutical delivery systems to achieve enhanced solubility and dissolution of ticagrelor.
RESUMEN
This study investigated pH-responsive Terbinafine HCL (TBH)-loaded nanogels as a new approach to treating superficial fungal infections. Acrylic acid (AA) is a synthetic monomer that was crosslinked with a natural polymer (gelatin) using a free radical polymerization technique to fabricate gelatin-g-poly-(acrylic acid) nanogels. Ammonium persulphate (APS) and N, N'-methylene bisacrylamide (MBA) were used as the initiator and crosslinker, respectively. Developed gelatin-g-poly-(acrylic acid) nanogels were evaluated for the swelling study (pH 1.2, 5, 7.4), DEE, particle size, FTIR, thermal stability (TGA, DSC), XRD, SEM, DEE, and in vitro drug release study to obtain optimized nanogels. Optimized nanogels were incorporated into 1% HPMC gel and then evaluated in comparison with Lamisil cream 1% for TBH stratum corneum retention, skin irritation, and in vitro and in vivo antifungal activity studies. Optimized nanogels (AAG 7) demonstrated a 255 nm particle size, 82.37% DEE, pH-dependent swelling, 92.15% of drug release (pH) 7.4 within 12 h, and a larger zone of inhibition compared to Lamisil cream. HPMC-loaded nanogels significantly improved the TBH skin retention percentage, as revealed by an ex vivo skin retention study, indicating the usefulness of nanogels for topical use. In vivo studies conducted on animal models infected with a fungal infection have further confirmed the effectiveness of nanogels compared with the Lamisil cream. Hence, Gelatin-g-poly-(acrylic acid) nanogels carrying poorly soluble TBH can be a promising approach for treating superficial fungal infections.
RESUMEN
BCS class II drugs exhibit low aqueous solubility and high permeability. Such drugs often have an incomplete or erratic absorption profile. This study aimed to predict the effects of ß-cyclodextrin (ßCD) and different hydrophilic polymers (poloxamer 188 (PXM-188), polyvinyl pyrrolidone (PVP) and soluplus (SOLO)) on the saturated solubility and dissolution profile of hydrophobic model drug rivaroxaban (RIV). Binary inclusion complex with ßCD were prepared by kneading and solvent evaporation method, at drug to cyclodextrin weight molar ratios of 1:1, 1:2, and 1:4. Saturated solubility of the hydrophobic model moiety was evaluated with ßCD to explore the increment in saturated solubility. Dissolution test was carried out to assess the drug release from the produced binary inclusion complex in the aqueous medium. Solid state analysis was performed using Fourier transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) techniques. When compared to pure drug, the binary complex (Drug: ßCD at molar ratio of 1:2 w/w) demonstrated the best performance in terms of enhanced solubility and drug release. Furthermore, ternary inclusion complex was prepared with hydrophilic polymers SOLO, PVP K-30 and PXM-188 at 0.5%,1%,2.5%,5% and 10% w/w to optimized binary formulation RIV:ßCD (1:2) prepared by kneading (KN) and solvent evaporation (S.E) method. The findings demonstrated that among ternary formulations (1:2 Drug: ßCD: SOLO 10% S.E) manifested greatest improvement in saturated solubility and dissolution rate. Results of solubility enhancement and improvement in dissolution profile of model drug by ternary inclusion complexation were also supported by FTIR, DSC, XRD, and SEM analysis. So, it can be concluded that the ternary inclusion systems were more effective compared to the binary combinations in improving solubility as well as dissolution of hydrophobic model drug rivaroxaban.
RESUMEN
Wound healing faces significant challenges in clinical settings. It often contains a series of dynamic and complex physiological healing processes. Instead of creams, ointments and solutions, alternative treatment approaches are needed. The main objective of the study was to formulate bacitracin zinc-loaded topical patches as a new therapeutic agent for potential wound healing. A free radical polymerization technique was optimized for synthesis. Polyethylene glycol-8000 (PEG-8000) was chemically cross-linked with acrylic acid in aqueous medium, using Carbopol 934 as a permeation enhancer and tween 80 as surfactant. Ammonium persulfate and N,N'-Methylenebisacrylamide (MBA) were utilized as initiator and cross-linker. FTIR, DSC, TGA, and SEM were performed, and patches were evaluated for swelling dynamics, sol-gel analysis, in vitro drug release in various media. A Franz diffusion cell was used for the permeation study. Irritation and wound healing with the drug-loaded patches were also studied. The characterization studies confirmed the formation of a cross-linked hydrogel network. The highest swelling and drug release were observed in formulations containing highest Polyethylene glycol-8000 and lowest N,N'-Methylenebisacrylamide concentrations. The pH-sensitive behavior of patches was also confirmed as more swelling, drug release and drug permeation across skin were observed at pH 7.4. Fabricated patches showed no sign of irritation or erythema as evaluated by the Draize scale. Faster wound healing was also observed with fabricated patches compared to marketed formulations. Therefore, such a polymeric network can be a promising technology for speeding up wound healing and minor skin injuries through enhanced drug deposition.
RESUMEN
OBJECTIVE: Ketorolac tromethamine (KT), selected as a model drug, is used in management of moderate to severe acute pain. It has a short half-life (â¼5.5 h) and requires frequent dose administration when needed for longer period of time. In our current project, we designed pH responsive hydrogel blends of chondroitin sulfate/pluronic F-127 (CS/Pl) for the controlled release of ketorolac. METHODS: Hydrogel blends were fabricated using free radical polymerization reaction technique utilizing different ratios of chondroitin sulfate (CS) (polymer) and pluronic F-127 (polymer), acrylic acid (monomer), N,N'-methyl-bisacrylamide (MBA) (cross-linker), initiator ammonium persulfate (APS) and tween-80 (surfactant). The fabricated hydrogel blends were studied and evaluated for pH responsiveness, swelling, water absorbency, in vitro drug release, and morphological characteristics such as SEM, XRD, FTIR, and TGA/DSC. Acute toxicity study was performed on rabbits. RESULTS: Maximum swelling and water absorbency were shown by CS/Pl blends being significantly greater at 7.4 (basic pH) than in 1.2 (acidic pH). In vitro dissolution demonstrated pH responsive controlled KT release following zero order at higher pH (7.4) medium up to 36 h. FTIR studies confirmed the structures of our blends; SEM results showed porous framework; thermal studies revealed higher stability of hydrogels than the individual polymers; and XRD confirmed the nature of our blends. Toxicity study revealed the nontoxic nature of the hydrogel blends. CONCLUSION: The prepared CS/Pl hydrogels demonstrated stimuli-controlled release with delivery of drug for prolonged period of time and thus can minimize dosing frequency, safe drug delivery, increased patient compliance and easiness.
Asunto(s)
Ketorolaco , Poloxámero , Animales , Conejos , Preparaciones de Acción Retardada , Sulfatos de Condroitina , Hidrogeles/química , Polímeros/química , Concentración de Iones de Hidrógeno , AguaRESUMEN
The aim of this study was to improve the solubility and prevent the ulcerogenic effect of flurbiprofen. Initially, binary and ternary solid dispersions (BSDs and TSDs) of flurbiprofen were prepared by using non-ordered mesoporous silica and gelucire. After preformulation testing (solubility, flow properties, % yield, and entrapment efficiency), four formulations were selected for further detailed studies. Solid-state characterization of optimized formulations (S1, S6, S7, and S12) showed successful drug incorporation in the solid dispersion at the molecular state without any noticeable interactions. The in vitro solubility and release study showed an increase in solubility and 98-100% of drug release in 30-45 min. The in vivo gastro-protective effect of the optimized formulations containing flurbiprofen and silica (1:1) with 25% w/w gelucire (S6 and S12) showed a reduction in the gastric lesion index (GLI) after four days of treatment. Moreover, histological images of the stomach lining (S6 and S12) illustrated normal epithelial cells and a partially protected mucosal membrane. Thus, TSD exhibited a significant increase in solubility and the dissolution rate and reduced the gastric ulceration. Therefore, TSDs are dubbed as efficacious carriers to enhance the bioavailability of flurbiprofen while simultaneously reducing its side effects.
RESUMEN
The objective of this study was to fabricate and evaluate a pH sensitive cross-linked polymeric network through the free radical polymerization technique for the model drug, cyclophosphamide, used in the treatment of non-Hodgkin's lymphoma. The Hydrogels were prepared using a polymeric blend of agarose, Pluronic acid, glutaraldehyde, and methacrylic acid. The prepared hydrogels were characterized for drug loading (%), swelling pattern, release behavior, the ingredient's compatibility, structural evaluation, thermal integrity, and toxicity evaluation in rabbits. The new polymer formation was evident from FTIR findings. The percentage loaded into the hydrogels was in the range of 58.65-75.32%. The developed hydrogels showed significant differences in swelling dynamics and drug release behavior in simulated intestinal fluid (SIF) when compared with simulated gastric fluid (SGF). The drug release was persistent and performed in a controlled manner for up to 24 h. A toxicity study was conducted on white albino rabbits. The developed hydrogels did not show any signs of ocular, skin, or oral toxicity; therefore, these hydrogels can be regarded as safe and potential carriers for controlled drug delivery in biomedical applications.
RESUMEN
Research aimed to develop and evaluate biodegradable, pH-responsive chemically cross-linked Pluronic F127 co-poly- (acrylic acid) nanogels for dermal delivery of Terbinafine HCL (TBH) to increase its permeability and as a new approach to treat skin fungal infections. TBH-loaded nanogels were successfully synthesized from acrylic acid (AA) and Pluronic F127 by free-radical copolymerization technique using N,N'-methylene bisacrylamide (MBA) as crosslinker and ammonium persulphate (APS) as initiator. Prepared nanogels exhibited 93.51% drug entrapment efficiency (DEE), 45 nm particle size, pH-dependent swelling and release behavior. Nanogels were characterized using different physicochemical techniques. The ex-vivo skin retention studies through rat skin showed about 42.34% drug retention from nanogels while 1% Lamisil cream (marketed product) showed about 26.56% drug retention. Moreover, skin irritation studies showed that nanogels were not irritating. Nanogels showed improved in-vitro antifungal activity against Candida albicans compared to commercial product. In-vivo studies on rats infected with Candida albicans confirmed superiority of nanogels over 1% Lamisil for eradication of fungal infection. This confirms that TBH loaded in Pluronic F127 co-poly-(acrylic acid) nanogels provided greater targetibility and cure rates of poorly soluble TBH in animal model and hence nanogels could be a potential carrier for effective topical delivery of TBH for skin fungal infection treatment.
RESUMEN
BACKGROUND: Chronic wound healing is a major challenge for the health care system around the globe. The current study was conducted to develop and characterize chemically cross-linked polyethylene glycol-co-poly (AMPS) hydrogel membranes to enhance the wound healing efficiency of antibiotic mupirocin (MP). METHODS: Free radical polymerization technique was used to develop hydrogel membranes. In an aqueous medium, polymer PEG-4000 was cross-linked with the monomer 2-acrylamido-2-methylpropane sulfonic acid (AMPS) in the presence of initiators ammonium peroxide sulfate (APS) and sodium hydrogen sulfite (SHS). N, N-Methylene-bis-acrylamide (MBA) was used as a cross-linker in preparing hydrogel membranes. Developed membranes were spherical, transparent, and had elasticity. FTIR, TGA/DSC, and SEM were used to characterize the polymeric system. Swelling behavior, drug loading, and release pattern at pH of 5.5 and 7.4, irritation study, ex vivo drug permeation, and deposition study were also evaluated. RESULTS: Formed membranes were spherical, transparent, and had elasticity. The formation of a stable polymeric network was confirmed by structural and thermal analysis. Evaluation of the drug permeability in the skin showed good permeation and retention capabilities. No irritancy to the skin was observed. CONCLUSION: Based on the results obtained, the present study concluded that the formulated stable network might be an ideal network for the delivery of mupirocin in skin infections.
Asunto(s)
Hidrogeles , Mupirocina , Preparaciones de Acción Retardada/química , Hidrogeles/química , Polietilenglicoles , Polímeros/química , Cicatrización de HeridasRESUMEN
[This corrects the article DOI: 10.3389/fchem.2020.00050.].
RESUMEN
In this study, the interpenetrating polymeric network (IPN) were fabricated via free radical polymerization using polymers hydroxypropyl methylcellulose (HPMC), Polyvinylpyrrolidone (PVP) and monomer Methacrylic acid (MAA) and also investigated their influence by changing their concentrations. The developed polymeric network is crosslinked via N' N' -methylene bis-acrylamide (MBA). Different characterizations have been performed to analyze fabricated interpenetrating polymeric network structure i.e., Scanning Electron Microscopy (SEM), X-ray Powder Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FT-IR), Thermo-gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Letrozole (LTZ) was loaded as a model drug in the developed system. Swelling dynamics as well as drug release behavior were thoroughly examined. FTIR studies corroborated the formation of interpenetrating polymeric network. SEM uncovered porous structure while TGA depicted enhanced thermal stability of polymeric network. PXRD depicted amorphous dispersion of LTZ. Swelling dynamics as well as LTZ release behavior from developed interpenetrating polymeric network hydrogels were dependent upon pH of the medium and concentration of pure reactants employed. Higuchi model was best fit to regression coefficient which indicated diffusion controlled mechanism of drug release. Acute oral toxicity study depicted no mortality or any signs relating to acute toxicity throughout the whole observed period. Hence, the designed interpenetrating polymeric network might turn out to be a safe and a potential carrier system for the delivery of LTZ in the treatment of breast cancer (BC).
Asunto(s)
Hidrogeles/química , Derivados de la Hipromelosa/química , Polímeros/química , Povidona/química , Animales , Reactivos de Enlaces Cruzados , Preparaciones de Acción Retardada , Portadores de Fármacos , Composición de Medicamentos , Liberación de Fármacos , Estabilidad de Medicamentos , Hidrogeles/toxicidad , Concentración de Iones de Hidrógeno , Derivados de la Hipromelosa/toxicidad , Letrozol/administración & dosificación , Letrozol/química , Metacrilatos , Polímeros/toxicidad , Povidona/toxicidad , ConejosRESUMEN
The present study aimed to formulate 5-fluorouracil loaded cross linked chitosan nanoparticles based on chemical cross-linking of low molecular weight chitosan with glutaraldehyde by reverse micelles technique as 5-FU is less hydrophobic, relatively potent, has a shorter half-life, is rapidly metabolized, less tolerated, and has low oral bioavailability; therefore, we aimed to formulate potential nanocarriers of 5-FU for efficient drug delivery to specific targeted areas of action, reduce oral toxicity, improve tolerability and therapeutic outcomes of 5-FU, in a restricted fashion to enhance the bioavailability of 5-FU. Nanoparticles were formulated by the reverse micelle method based on the chemical cross-linking of glutaraldehyde (25% aqueous solution) into a w/o emulsion in different ratios. LMWCH-NPs were characterized for post-formulation parameters by mean particle size, zeta potential, %age yield, loading/entrapment efficiency, Fourier transform infrared spectroscopy (FTIR), DSC/TGA, TEM, PXRD, drug release at pH 1.2, and pH 7.4. 5-FU loaded NPs showed a size range (198 nm-200 nm) and zeta potential (-39mV to -41mV), which ensured mechanical stability and increased retention time in blood vessels by the sustained release properties of biodegradable nanocarrier drug delivery systems. % age yield showed the range 92% to 96% while % LC ranged 2.0% to 3.4% and %EE ranged 40% to 43%. The TEM images showed spherical nanoparticles. FTIR revealed the compatibility between the drug and the cross-linked polymer. DSC/TGA ensured the thermal stability of the drug, while the solid-state stability of the drug-loaded cross-linked chitosan nanoparticles was evaluated by powder X-ray diffraction (PXRD) analysis. Drug release studies were performed using the dialysis bag technique at both pH (1.2 and 7.4) to mimic the gastrointestinal tract. Highly stable NPs displayed targeted release in phosphate buffer pH 7.4 at 37°C. Fickian diffusion was the predominant release with an R2 value of 0.9975-0.9973-and an N value 0.45-0.53. Prepared nanoparticles are inert, biodegradable, and biocompatible drug delivery systems for sustained release of 5-FU with maximum therapeutic efficacy and bioavailability.
RESUMEN
BACKGROUND: In recent era, pH sensitive polymeric carriers that combines the materials engineering and medicine is gaining researcher's attention as they maximizes drug concentration at site of absorption and reduces side effects for e.g. orally administered cetirizine HCl (CTZ HCl) upsets the stomach and furthermore shows high intestinal absorption. Thus, development of pH sensitive hydrogels with sufficient mechanical strength will be good candidate to address this issue. METHODS: Here, we developed pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum (IA-g-poly(AM)/sterculia gum) semi-interpenetrating network (semi-IPN) by free radical polymerization technique for intestinal delivery of CTZ HCL. RESULTS: Optimized formulation (I5) with 6% w/w IA showed negligible swelling at pH 1.2, and maximum swelling at pH 7.4. Solid state characterization of optimized formulation showed successful development of semi-IPN structure and incorporation of drug without any noticeable drug-carrier interaction. In vitro release study showed biphasic pH dependent release of CTZ HCl, where initial burst release was observed at acidic pH followed by sustained release at basic pH. Acute oral toxicity and histopathological studies confirmed the non-toxic nature of IA-g-poly(AM)/sterculia gum. CONCLUSION: Conclusively, developed biocompatible semi-IPN hydrogels with sufficient pH sensitivity and mechanical strength could serve as a potential carrier for intestinal delivery of CTZ HCL to maximize its absorption and reduce side effects.
Asunto(s)
Resinas Acrílicas , Portadores de Fármacos , Hidrogeles , Gomas de Plantas , Sterculia , Succinatos , Resinas Acrílicas/química , Resinas Acrílicas/toxicidad , Animales , Portadores de Fármacos/química , Portadores de Fármacos/toxicidad , Composición de Medicamentos , Liberación de Fármacos , Hidrogeles/química , Hidrogeles/toxicidad , Concentración de Iones de Hidrógeno , Gomas de Plantas/química , Gomas de Plantas/toxicidad , Polimerizacion , Conejos , Succinatos/química , Succinatos/toxicidad , Pruebas de Toxicidad AgudaRESUMEN
OBJECTIVE: Purpose of the current study was to improve the oral effectiveness of 5-fluorouracil (5-FU) by developing novel controlled, combinatorial drug delivery system (nCDDS) for co-delivery of 5-FU and leucovorin calcium (LC) for colon targeting. SIGNIFICANCE: On the basis of results obtained, novel controlled, combinatorial drug delivery system could be an effective strategy for the colon targeting of 5-FU and LC. METHODS: Free radical polymerization method was tuned and used to fabricate this nCDDS. The nCDDS is synthesized in two steps, first synthesis of 5-FU/LC calcium loaded nanogels and second, pre-synthesized 5-FU and LC loaded nanogels were dispersed in pectin based polymerized matrix hard gel. The nanogels and nCDDS gels were characterized for network structure, thermal stability, and surface morphology. Swelling and in vitro release studies were carried out at different pH 1.2 and 7.4 both for naive nanogels and combined matrix gels. In vivo study of combinatorial gel was performed on rabbits by using HPLC method to estimate plasma drug concentration and pharmacokinetics parameters. RESULTS: Structure and thermal analysis confirmed the formation of stable polymeric network. SEM of nanogels and combinatorial gels showed that the spongy and rough edges particles and uniformly distributed in the combinatorial gel. The prepared nCDDS showed excellent water loving capacity and pH responsiveness. Combinatorial gel showed excellent characteristic for colonic delivery of drugs, which were confirmed by various in vitro and in vivo characterizations. Acute oral toxicity study of combinatorial gel confirmed the biocompatible and nontoxic characteristics of developed formulation. CONCLUSION: Conclusively, it can be found that nCDDS showed excellent properties regarding drug targeting in a controllable manner as compared to naive PEGylated nanogels.
Asunto(s)
Calcio , Fluorouracilo , Animales , Colon , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos/métodos , Liberación de Fármacos , Fluorouracilo/química , Geles/química , Leucovorina , Nanogeles , ConejosRESUMEN
Herein, we report co-encapsulation of ofloxacin with tea tree or lavender oil in gellan gum based hydrogel films by solvent casting ionotropic gelation method as wound dressing. Prepared films were transparent, flexible, and displayed antioxidant activity with superior antibacterial response against common inhabitants of wound i.e. gram positive and negative bacteria. Solid-state characterization of optimized formulation (OL3 and OT3) revealed successful incorporation of drug and oils in hydrogel structure without any noticeable interaction. In vitro release studies showed an initial burst release but remaining portion released in controlled manner over 48 h from the films and furthermore, presence of oils did not affected the ofloxacin release. Optimized formulation containing ofloxacin and 25% w/w lavender/tea tree oil showed 98% wound contraction in rats after ten days of treatment. Histological images displayed completely healed epidermis. Taken together, our prepared hydrogel films demonstrated favorable features with appreciable antibacterial, wound healing activity and could be useful for the treatment of full thickness wounds.
Asunto(s)
Metilgalactósidos/química , Ofloxacino/farmacología , Aceites Volátiles/farmacología , Aceites de Plantas/farmacología , Polisacáridos Bacterianos/química , Aceite de Árbol de Té/farmacología , Cicatrización de Heridas/efectos de los fármacos , Animales , Antioxidantes/farmacología , Rastreo Diferencial de Calorimetría , Liberación de Fármacos , Escherichia coli/efectos de los fármacos , Cinética , Lavandula , Pruebas de Sensibilidad Microbiana , Ratas , Espectroscopía Infrarroja por Transformada de Fourier , Staphylococcus aureus/efectos de los fármacos , Termogravimetría , Difracción de Rayos XRESUMEN
In the present study, we synthesized silver (Ag) nanoparticles using aqueous extracts of clove (Syzygium aromaticum) (SAE). This synthesis of green silver nanoparticles (AgNP) was a novel and effectual tool against the Newcastle Viral Disease (NDV). Syzygium aromaticum extract was used as reducing and stabilizing agent for synthesis of silver nanoparticles. AgNP were characterized using diversity of biophysical methods inclusive of Fourier transform infrared spectroscopy (FTIR), UV-VIS spectroscopy and Transmission electron microscopy (TEM) for morphology and size. Furthermore, XRD analysis confirmed the crystalline nature of the particles. In current investigations, the antiviral activity of clove buds silver nanoparticles was inspected in-vitro and in-ovo. Embryonated chicken eggs were used to perform the cytotoxicity assay of the clove extract silver nanoparticles (CESN). CESN showed in vitro antiviral activity against NDV in embryonated eggs.
Asunto(s)
Antivirales/farmacología , Nanopartículas del Metal/administración & dosificación , Extractos Vegetales/farmacología , Plata/farmacología , Syzygium/química , Animales , Pollos , Tecnología Química Verde/métodos , Enfermedad de Newcastle/tratamiento farmacológico , Virus de la Enfermedad de Newcastle/efectos de los fármacos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Agua/químicaRESUMEN
The effects of three hydrophilic polymers, namely, carboxymethyl cellulose sodium (CMC-Na), polyvinyl alcohol (PVA) and poloxamer-188 (PXM-188) on the solubility and dissolution of diflunisal (DIF) in complexation with ß-cyclodextrin (ßCD) or hydroxypropyl ß-cyclodextrin (HPßCD), were investigated. The kneading method was used at different drug to cyclodextrin weight ratios. Increases in solubility and drug release were observed with the DIF/ßCD and DIF/HPßCD complexes. The addition of hydrophilic polymers at 2.5, 5.0 and 10.0% w/w markedly improved the complexation and solubilizing efficiency of ßCD and HPßCD. Fourier-transform infrared (FTIR) showed that DIF was successfully included into the cyclodextrin cavity. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) confirmed stronger drug amorphization and entrapment in the molecular cage of cyclodextrins. The addition of PVA, CMC-Na or PXM-188 reduced further the intensity of the DIF endothermic peak. Most of the sharp and intense peaks of DIF disappeared with the addition of hydrophilic polymers. In conclusion, PXM-188 at a weight ratio of 10.0% w/w was the best candidate in enhancing the solubility, stability and release of DIF.
RESUMEN
The limited aqueous solubility of many active pharmaceutical ingredients (APIs) is responsible for their poor performance and low drug levels in blood and at target sites. Various approaches have been adopted to tackle this issue. Most recently, mesoporous silica nanoparticles (MSN) have gained attention of pharmaceutical scientists for bio-imaging, bio-sensing, gene delivery, drug solubility enhancement, and controlled and targeted drug release. Here, we have successfully incorporated the poorly water soluble antiviral drug velpatasvir (VLP) in MSN. These spherical particles were 186 nm in diameter with polydispersity index of 0.244. Blank MSN have specific surface area and pore diameter of 602.5 ± 0.7 m2/g and 5.9 nm, respectively, which reduced after successful incorporation of drug. Drug was in amorphous form in synthesized VLP-loaded silica particles (VLP-MSN) with no significant interaction with carrier. Pure VLP showed poor dissolution with progressive increment in pH of dissolution media which could limit its availability in systemic circulation after oral administration. After VLP loading in silica carriers, drug released rapidly over a wide range of pH values, i.e., 1.2 to 6.8, thus indicating an improvement in the solubility profile of VLP. These particles were biocompatible, with an LD50 of 448 µg/mL, and in-vivo pharmacokinetic results demonstrated that VLP-MSN significantly enhanced the bioavailability as compared to pure drug. The above results clearly demonstrate satisfactory in-vitro performance, biocompatibility, non-toxicity and in-vivo bioavailability enhancement with VLP-MSN.
RESUMEN
This study investigated the use of pure polymer chitosan (CS), xanthan gum (XG), monomer 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and initiator potassium persulfate (KPS) as drug carrier system crosslinked through N' N'-methylene bis-acrylamide (MBA) for controlled drug delivery of acyclovir (ACV). ACV is highly effective and selective antiviral drugs used for prophylaxis and treatment against herpes simplex viruses (HSV) infections. Present oral marketed formulations are associated with number of side effects and shortcomings which hampered its clinical effectiveness. Hydrogels (FCX1-FCX9) composed of CS, XG, AMPS, MBA, and KPS were prepared by free radical polymerization technique and characterized through FTIR, PXRD, thermal analysis and SEM. Swelling dynamics and drug release behavior was also investigated. FTIR studies confirmed that ACV was successfully encapsulated into hydrogel polymeric network. SEM revealed porous structure whereas thermal analysis showed enhanced thermal stability of polymeric network. PXRD indicated amorphous dispersion of ACV during preparation process. Swelling dynamics and ACV release behavior from developed hydrogels was dependent on pH of the medium and concentration of pure reactants used. Korsmeyer-Peppas model was best fit to regression coefficient. The present work demonstrated a potential for developing a pH sensitive hydrogel for an antiviral drug ACV by using pure polymers CS, XG, and monomer AMPS.
RESUMEN
A stability indicating reverse phase-HPLC method was designed for determination of dexibuprofen in drug solution and in nanocream formulation. Chromatographic conditions were optimized simply by adjusting the content and different compositions of reverse phase associated with mobile phases. Different parameters like specificity, limit of quantification (LOQ), limit of detection, linearity, range, system suitability, precision and accuracy were determined. Stability studies of dexibuprofen in nanocream were taken under the stressed situations of alkali, acid, oxidation process, UV and heat degradation. Tailing factor and % RSD were found >2000 and <2% respectively. The method was identified linear over the range of 0.2-1.6mg/ml having co-efficient of correlation 0.9995. Intra-day and inter- day precision and accuracy values for dexibuprofen were < 0.6% and <1.1032 and < 0.3% and 1.10% respectively. Stability studies showed that dexibuprofen was stable in nanocream against alkali, acid, oxidation, UV light and heat. The developed validated method was precise and accurate for the evaluation of dexibuprofen in solution as well as in nanocream formulation.