A nanocomposite competent to overcome solubility and permeation issues of capsaicin and thiocolchicoside simultaneously in gout management: Fabrication of nanocubosomes.

This study aimed to formulate nano-cubosomes (NCs) co-loaded with capsaicin (CAP) and thiocolchicoside (TCS) to enhance their bioavailability and minimize associated potential side effects through transdermal delivery alongside their synergistic activity. Twenty seven (27) nano-cubosomal dispersions were prepared according to Box-Behnken factorial design and the effect of CAP, TCS, glyceryl mono oleate (GMO) and poloxamer 407 (P407) concentrations on particle size, polydispersity index (PDI), zeta potential, and entrapment efficiency were assessed. The results revealed that the optimized formulation exhibited a mean droplet size of 503 ± 10.3 nm, PDI of 0.405 ± 0.02, zeta potential of -10.0 ± 1.70 mV and entrapment efficiency of 86.9 ± 3.56 %. The in vivo anti-inflammatory effect of optimized formulation was studied in rats by injecting carrageenan to induce edema. The results of in vivo study showed that transdermal application of nano-cubosomes co-loaded with CAP and TCS significantly (p value < 0.05) improved carrageenan induced inflammation compared with standard treatment. The analgesic activity of optimized formulation was evaluated in rats by using Eddy's hot plate method. The findings of analgesic activity illustrated that the analgesic effects exhibited by test formulation may be associated with increased licking period and inhibition of prostaglandins level. In conclusion, the transdermal application of NCs co-loaded with CAP and TCS may be a promising delivery system for enhancing their bioavailability as well as synergistic analgesic and anti-inflammatory activity in gout management.

Real-world effectiveness of GLP-1 receptor agonist-based treatment strategies on "time in range" in patients with type 2 diabetes.

Background: Diabetes affects millions of people worldwide annually, and several methods, including medications, are used for its management; glucagon-like peptide-1 receptor agonists (GLP-1RAs) are one such class of medications. The efficacy and safety of GLP-1RAs in treating type 2 diabetes mellitus (T2DM) have been assessed and have been shown to significantly improve time in range (TIR) in several clinical trials. However, presently, there is a lack of real-world evidence on the efficacy of GLP-1RAs in improving TIR. To address this, we investigated the effect of GLP-1RA-based treatment strategies on TIR among patients with T2DM in real-world clinical practice. Methods: This multicenter, retrospective, real-world study included patients with T2DM who had previously used a continuous glucose monitoring (CGM) system and received treatment with GLP-1RAs or oral antidiabetic drugs (OADs). Patients who received OADs served as controls and were matched in a 1:1 ratio to their GLP-1RA counterparts by propensity score matching. The primary endpoint was the TIR after 3-6 months of treatment. Results: According to propensity score matching, 202 patients were equally divided between the GLP-1RA and OAD groups. After 3-6 months of treatment, the TIR values for the GLP-1RA and OAD groups were 76.0% and 65.7%, respectively (p < 0.001). The GLP-1RA group displayed significantly lower time above range (TAR) and mean glucose values than the OAD group (p < 0.001). Subgroup analysis revealed that, compared with the administration of liraglutide, the administration of semaglutide and polyethylene glycol loxenatide (PEG-Loxe) significantly improved TIR over 3-6 months of treatment (p < 0.05). Conclusion: These real-world findings indicate that GLP-1RA-based treatment strategies could be superior to oral treatment strategies for improving TIR among patients with T2DM and that once-weekly GLP-1RA may be more effective than a once-daily GLP-1RA. Clinical trial registration: http://www.chinadrugtrials.org.cn/index.html, identifier number ChiCTR2300073697.

Formulation development of pharmaceutical nanoemulgel for transdermal delivery of feboxostat: Physical characterization and in vivo evaluation.

This study aimed to fabricate and characterize feboxostat (FXT) loaded nanoemulgel (NEG) for transdermal delivery. NEG was prepared by high sheared homogenization technique and characterized for thermodynamic stability, pH analysis, drug content, zeta analysis, viscosity, spreadability, FTIR, in-vitro drug release and ex-vivo permeation. In vivo anti-inflammatory activity was evaluated in albino rats by inducing edema in hind paws using carrageenan. The formulations showed optimum thermodynamic stability, having no phase separation and color change. The pH was in the range of human skin range i.e. 5.5-6.5. The drug content of F3 and F4 formulations were 97.56 ± 3.45 % and 83.88 ± 3.12 % respectively which were in official limit of USP i.e. 90 ± 10 %. No interaction was found between the FXT and various components after FTIR analysis. The viscosity of NEG was 4587 cp at 6 rpm and 2681 cp at 12 rpm. The droplet sizes of F1 (Blank NE), F2 (Blank NEG), F3 (Drug loaded NE) and F4 (Drug loaded NEG) were 148.6 nm, 153.4 nm, 402.1 nm and 498.3 nm respectively. The percent drug release of F3 was 82 ± 0.97 %, while F4 released 78 ± 0.91 % after 24 h. The drug permeation was 77 ± 1.28 % and 74 ± 1.10 % for F3 and F4 respectively. The optimized formulation significantly (p < 0.05; ANOVA) inhibited the paw edema in albino rats as compared to the control and standard group. It has been concluded that FXT loaded NEG can be a safe and effective alternative to the oral therapy of FXT.

Nitazoxanide and quercetin co-loaded nanotransfersomal gel for topical treatment of cutaneous leishmaniasis with macrophage targeting and enhanced anti-leishmanial effect.

Purpose: Anti-leishmanial medications administered by oral and parenteral routes are less effective for treatment of cutaneous leishmaniasis (CL) and cause toxicity, hence targeted drug delivery is an efficient way to improve drug availability for CL with reduced toxicity. This study aimed to develop, characterize and evaluate nitazoxanide and quercetin co-loaded nanotransfersomal gel (NTZ-QUR-NTG) for the treatment of CL. Methods: NTZ-QUR-NT were prepared by thin film hydration method and were statistically optimized using Box-Behnken design. To ease the topical delivery and enhance the retention time, the NTZ-QUR-NT were dispersed in 2 % chitosan gel. Moreover, in-vitro drug release, ex-vivo permeation, macrophage uptake, cytotoxicity and anti-leishmanial assays were performed. Results: The optimized formulation indicated mean particle size 210 nm, poly dispersity index (PDI) 0.16, zeta potential (ZP) -15.1 mV and entrapment efficiency (EE) of NTZ and QUR was 88 % and 85 %, respectively. NTZ-QUR-NT and NTZ-QUR-NTG showed sustained release of the incorporated drugs as compared to the drug dispersions. Skin permeation of NTZ and QUR in NTZ-QUR-NTG was 4 times higher in comparison to the plain gels. The NTZ-QUR-NT cell internalization was almost 10-folds higher than NTZ-QUR dispersion. The cytotoxicity potential (CC50) of NTZ-QUR-NT (71.95 ± 3.32 µg/mL) was reduced as compared to NTZ-QUR dispersion (49.77 ± 2.15 µg/mL. A synergistic interaction was found between NTZ and QUR. Moreover, in-vitro anti-leishmanial assay presented a lower IC50 value of NTZ-QUR-NT as compared to NTZ-QUR dispersion. Additionally, a significantly reduced lesion size was observed in NTZ-QUR-NTG treated BALB/c mice, indicating its antileishmanial potential. Conclusion: It can be concluded that nanotransfersomal gel has the capability to retain and permeate the incorporated drugs through stratum corneum and induce synergetic anti-leishmanial effect of NTZ and QUR against cutaneous leishmaniasis.

Synthesis and Characterization of Calcium Alginate-Based Microspheres Entrapped with TiO2 Nanoparticles and Cinnamon Essential Oil Targeting Clinical Staphylococcus aureus.

It is important to create new generations of materials that can destroy multidrug-resistant bacterial strains, which are a serious public health concern. This study focused on the biosynthesis of an essential oil entrapped in titanium dioxide (TiO2) calcium alginate-based microspheres. In this research, calcium alginate-based microspheres with entrapped TiO2 nanoparticles and cinnamon essential oil (CI-TiO2-MSs) were synthesized, using an aqueous extract of Nigella sativa seeds for TiO2 nanoparticle preparation, and the ionotropic gelation method for microsphere preparation. The microspheres obtained were spherical, uniformly sized, microporous, and rough surfaced, and they were fully loaded with cinnamon essential oil and TiO2 nanoparticles. The synthesized microspheres were analyzed for antibacterial activity against the clinical multidrug-resistant strain of Staphylococcus aureus. Disc diffusion and flow cytometry analysis revealed strong antibacterial activity by CI-TiO2-MSs. The synthesized CI-TiO2-MSs were characterized by the SEM/EDX, X-ray diffraction, and FTIR techniques. Results showed that the TiO2 nanoparticles were spherical and 99 to 150 nm in size, whereas the CI-TiO2-MSs were spherical and rough surfaced. Apoptosis analysis and SEM micrography revealed that the CI-TiO2-MSs had strong bactericidal activity against S. aureus. The in vitro antibacterial experiments proved that the encapsulated CI-TiO2-MSs had strong potential for use as a prolonged controlled release system against multidrug-resistant clinical S. aureus.

Pharmacological effects (gastrointestinal, respiratory and vascular) of Calligonum polygonoides: Animal model based studies.

The aim of this study was to analyze gastrointestinal, respiratory and vascular pharmacological effects of 70% hydro-alcoholic extract of Calligonum polygonoides (Cp. Cr) in animal models. All the procedures were carried-out as per previous literature with slight modification where necessary. It was found that Cp. Cr affected significant relaxation of spontaneous and K+ (80 mM) induced contractions. The results showed a corresponding shift of calcium concentration response curves. Similarly Cp. Cr showed relaxant effect on trachea in carbachol (Cch) induced tracheal contractions. Moreover, contractions induced by phenylephrine (1µM) in quarantine rabbit aortic preparations causes Cp. Cr induced relaxation of aortal contractions. Verapamil was used as a standard calcium channel blocker. The findings of this study suggested vasodilator, bronchodilator and spasmolytic effects of Cp. Cr.

Fabrication and Characterizations of Pharmaceutical Emulgel Co-Loaded with Naproxen-Eugenol for Improved Analgesic and Anti-Inflammatory Effects.

The aim of this study was to fabricate and characterize a pharmaceutical emulgel co-loaded with naproxen/eugenol for transdermal delivery to improve the analgesic and anti-inflammatory effects and to eliminate GIT adverse reactions. Emulgel was prepared using a slow emulsification method and evaluated for physical appearance, thermodynamic stability, viscosity, pH, spreadability, extrudability, in-vitro drug release, drug content, ex-vivo permeation, drug retention studies and in-vivo studies. The emulgel exhibited good physical attributes, being thermodynamically stable with no phase separation, having excellent homogeneity, and pH 5.5 to 6.5. Slight changes in viscosity, spreadability and extrudability with respect to high temperature were observed (p > 0.05). The drug content was 96.69 ± 1.18% and 97.24 ± 1.27% for naproxen and eugenol, respectively. The maximum release of naproxen after 12 h was 85.14 ± 1.11%, whereas eugenol was 86.67 ± 1.23% from emulgel following anomalous non-Fickian mechanism. The maximum % permeation of naproxen across skin was 78.5 ± 1.30, whereas maximum % permeation of eugenol was 83.7 ± 1.33 after 12 h. The skin retention of eugenol and naproxen was 8.52 ± 0.22% and 6.98 ± 0.24%, respectively. The optimized emulgel inhibited the carrageenan induced paw edema. The pain reaction times of optimized emulgel and standard marketed product (Voltral®) were 11.16 ± 0.17 and 10.36 ± 0.47, respectively, with no statistically significant difference (p > 0.05). This study concluded that transdermal delivery of naproxen-eugenol emulgel synergized the anti-inflammatory and analgesic effects of naproxen and eugenol.

Polycaprolactone based pharmaceutical nanoemulsion loaded with acriflavine: optimization and in vivo burn wound healing activity.

Cutaneous burn wounds are a common and troublesome critical issue of public health. Over the last decade, many researchers have investigated the development of novel therapeutic modalities which are capable of fully regeneration and reinstatement of structure and function of the skin with no or limited scar formation. Novel pharmaceutical carriers are offering a potential platform to deliver the drug effectively and to overcome the limitation associated with conventional wound dressings. The aim of this study was to investigate a pharmaceutical acriflavine-loaded polycaprolactone nanoemulsion (ACR-PCL-NE) for burn wound healing. Nanoemulsion was prepared by using the double emulsion solvent evaporation technique and it was subjected to thermodynamic stability testing, droplet size, polydispersity, zeta potential, pH, and surface morphology analysis. The in vivo study was performed to evaluate the efficacy of nanoemulsion using Sprague-Dawley rats as an animal model. The results of this study revealed that the optimized nanoemulsion was stable and had desirable physicochemical properties. The pH was about 4.02 at 25 °C and the particle size was found to be in the range of 302 ± 4.62 nm while the zeta potential was -7.8 ± 1.22 mV and the polydispersity index of 0.221 ± 0.017. The wound regeneration process was evaluated in vivo by different techniques, the formulation group (FG) showed high wound healing potential as compared to the standard group (SD) and control group (CG). These findings reveal that this nanoemulsion formulation can be used effectively for wound healing.

Biodegradable Polymers-Based Smart Nanocrystals for Loxoprofen Delivery with Enhanced Solubility: Design, Fabrication and Physical Characterizations.

Nanocrystals are carrier-free, submicron-sized, colloidal drug delivery systems with particle sizes in the mean nanometer range. Nanocrystals have high bioavailability and fast absorption because of their high dissolution velocity and enhanced adhesiveness to cell membranes. Loxoprofen, a nonsteroidal anti-inflammatory drug belonging to the Biopharmaceutical Classification System (BCS) II drug class, was selected as the model drug. The aim of this study was to formulate nanocrystals of loxoprofen. A total of 12 formulations (F1 to F12) were prepared. An antisolvent technique was used to determine the effects of various stabilizers and processing conditions on the optimization of formulations. The various stabilizers used were hydroxypropyl methylcellulose (0.5%), polyvinylpyrrolidone (0.5%), and sodium lauryl sulfate (0.1%). The various characterizations conducted for this research included stability studies at 25 °C and 4 °C, scanning electron microscopy, transmission electron microscopy (TEM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), zeta potentials, polydispersity indexes, and dissolution studies. F10 was the optimized formulation that showed stability at room temperature, as well as at a refrigerated temperature, for 30 days. A high dissolution rate (100% within the first 10 min) was shown by comparative dissolution studies of nano-suspensions with the micro-suspension and raw loxoprofen. F10 formulation had a non-porous and crystalline morphology on evaluation by TEM and XRPD, respectively, and the average particle size was 300 ± 0.3 nm as confirmed by TEM. DSC recorded a reduction in the melting point (180 °C processed and 200 °C unprocessed melting points). The dissolution rate and solubility of the formulated loxoprofen nanocrystals were significantly enhanced. It can be concluded that selecting suitable stabilizers (i.e., polymers and surfactants) can produce stable nanocrystals, and this can potentially lead to a scaling up of the process for commercialization.

Moringa concanensis-Mediated Synthesis and Characterizations of Ciprofloxacin Encapsulated into Ag/TiO2/Fe2O3/CS Nanocomposite: A Therapeutic Solution against Multidrug Resistant E. coli Strains of Livestock Infectious Diseases.

Background: Multidrug resistant MDR bacterial strains are causing fatal infections, such as mastitis. Thus, there is a need for the development of new target-oriented antimicrobials. Nanomaterials have many advantages over traditional antibiotics, including improved stability, controlled antibiotic release, targeted administration, enhanced bioavailability, and the use of antibiotic-loaded nanomaterials, such as the one herein reported for the first time, appear to be a promising strategy to combat antibiotic-resistant bacteria. The use of rationally designed metallic nanocomposites, rather than the use of single metallic nanoparticles (NPs), should further minimize the bacterial resistance. Aim: Green synthesis of a multimetallic/ternary nanocomposite formed of silver (Ag), titanium dioxide (TiO2), and iron(III) oxide (Fe2O3), conjugated to chitosan (CS), in which the large spectrum fluoroquinolone antibiotic ciprofloxacin (CIP) has been encapsulated. Methods: The metallic nanoparticles (NPs) Ag NPs, TiO2 NPs, and Fe2O3 NPs were synthesized by reduction of Moringa concanensis leaf aqueous extract. The ternary junction was obtained by wet chemical impregnation technique. CIP was encapsulated into the ternary nanocomposite Ag/TiO2/Fe2O3, followed by chitosan (CS) conjugation using the ionic gelation method. The resulting CS-based nanoparticulate drug delivery system (NDDS), i.e., CIP-Ag/TiO2/Fe2O3/CS, was characterized in vitro by gold standard physical techniques such as X-ray diffractometry (XRD), field emission scanning electron microscopy (FESEM), Fourier-transform infrared (FTIR) spectroscopy. Pharmacological analyses (i.e., LC, EE, ex-vivo drug release behavior) were also assessed. Further, biological studies were carried out both ex vivo (i.e., by disk diffusion method (DDM), fluorescence-activated single cell sorting (FACS), MTT assay) and in vivo (i.e., antibacterial activity in a rabbit model, colony-forming unit (CFU) on blood agar, histopathological analysis using H&E staining). Results: The encapsulation efficiency (EE) and the loading capacity (LC) of the NDDS were as high as 94% ± 1.26 and 57% ± 3.5, respectively. XRD analysis confirmed the crystalline nature of the prepared formulation. FESEM revealed nanorods with an average diameter of 50−70 ± 12 nm. FTIR confirmed the Fe-O-Ti-CS linkages as well as the successful encapsulation of CIP into the NDDS. The zeta potential (ZP) of the NDDS was determined as 85.26 ± 0.12 mV. The antimicrobial potential of the NDDS was elicited by prominent ZIs against MDR E. coli (33 ± 1.40 mm) at the low MIC of 0.112 µg/mL. Morphological alterations (e.g., deformed shape and structural damages) of MDR pathogens were clearly visible overtime by FESEM after treatment with the NDDS at MIC value, which led to the cytolysis ultimately. FACS analysis confirmed late apoptotic of the MDR E. coli (80.85%) after 6 h incubation of the NDDS at MIC (p < 0.05 compared to untreated MDR E. coli used as negative control). The highest drug release (89% ± 0.57) was observed after 8 h using PBS medium at pH 7.4. The viability of bovine mammary gland epithelial cells (BMGE) treated with the NDDS remained superior to 90%, indicating a negligible cytotoxicity (p < 0.05). In the rabbit model, in which infection was caused by injecting MDR E. coli intraperitoneally (IP), no colonies were detected after 72 h of treatment. Importantly, the histopathological analysis showed no changes in the vital rabbit organs in the treated group compared to the untreated group. Conclusions: Taken together, the newly prepared CIP-Ag/TiO2/Fe2O3/CS nanoformulation appears safe, biocompatible, and therapeutically active to fight MDR E. coli strains-causing mastitis.

Fecal microbiota transplantation treatment of autoimmune-mediated type 1 diabetes mellitus.

Type 1 diabetes mellitus (T1DM) is an autoimmune-mediated disease characterized by a reduced or absolute lack of insulin secretion and often associated with a range of vascular and neurological complications for which there is a lack of effective treatment other than lifestyle interventions and pharmacological treatments such as insulin injections. Studies have shown that the gut microbiota is involved in mediating the onset and development of many fecal and extrafecal diseases, including autoimmune T1DM. In recent years, many cases of gut microbiota transplantation for diseases of the bowel and beyond have been reported worldwide, and this approach has been shown to be safe and effective. Here, we conducted an experimental treatment study in two adolescent patients diagnosed with autoimmune T1DM for one year. Patients received one to three rounds of normal fecal microbiota transplants (FMT) and were followed for up to 30 weeks. Clinical outcomes were measured, including biochemical indices, medication regimen, and dosage adjustment. Fecal microbiota metagenomic sequencing after transplantation provides a reference for more reasonable and effective microbiota transplantation protocols to treat autoimmune T1DM. Our results suggest that FMT is an effective treatment for autoimmune T1DM. Clinical Trial Registration: http://www.chictr.org.cn, identifier ChiCTR2100045789.

Technologies for Solubility, Dissolution and Permeation Enhancement of Natural Compounds.

The current review is based on the advancements in the field of natural therapeutic agents which could be utilized for a variety of biomedical applications and against various diseases and ailments. In addition, several obstacles have to be circumvented to achieve the desired therapeutic effectiveness, among which limited dissolution and/or solubility and permeability are included. To counteract these issues, several advancements in the field of natural therapeutic substances needed to be addressed. Therefore, in this review, the possible techniques for the dissolution/solubility and permeability improvements have been addressed which could enhance the dissolution and permeability up to several times. In addition, the conventional and modern isolation and purification techniques have been emphasized to achieve the isolation and purification of single or multiple therapeutic constituents with convenience and smarter approaches. Moreover, a brief overview of advanced natural compounds with multiple therapeutic effectiveness have also been anticipated. In brief, enough advancements have been carried out to achieve safe, effective and economic use of natural medicinal agents with improved stability, handling and storage.

Fabrication and Evaluation of W/O Emulsion Loaded with Linum usitatissimum Seeds Extract for Anti-Leishmaniasis Efficacy.

Leishmaniasis, remains a serious health problem in many developing countries with thousands of new cases recorded annually. Novel therapies are required as existing treatment regimens are limited by their high cost, high toxicity, increased parasite resistance, patient's intolerance, and invasive means of long-duration administration. With several studies reporting the anti-leishmaniasis promise of medicinal plants, interest in plants and herbal drugs is attracting much attention worldwide. In this pilot study, we analysed extracts of Linum usitatissimum seeds (LU) to identify essential phytochemicals and test their activity against cutaneous leishmaniasis both in-vitro and in-vivo. We performed phytochemical screening of LU seeds extract as well as its in-vitro leishmanicidal and anti-amastigote assays. Water-in-oil cream containing 10% LU crude extract (10 mg/mL) was then prepared. The stability of the cream was evaluated for 28 days at 8 °C, 25 °C and 40 °C. In-vivo efficacy and safety of the cream was performed in 26 patients with cutaneous leishmaniasis who agreed to participate voluntarily in the study. The active treatment period lasted for 3 weeks, while the follow-up period was extended to 4 months. During the active study period, images of skin lesions were taken before and after treatment. Analyses of LU seeds extract confirmed the presence of terpenoids, flavonoids, tannins, alkaloids, and polyphenols. In-vitro studies showed significant activity against promastigote and intracellular amastigote forms of Leishmaniamajor. The cream was pharmaceutically stable, although some minor changes were noticed in relation to its physical characteristics. In-vivo assessment of the cream showed a 69.23% cure rate with no side effects, allergy, or irritation. We conclude that our newly developed water in oil cream containing 10% LU seeds extract could be an effective and safe topical anti-leishmanial medication for patients with CL.

Formulation and Characterization of Carbopol-934 Based Kojic Acid-Loaded Smart Nanocrystals: A Solubility Enhancement Approach.

Kojic acid (KA) is a BCS class II drug having low solubility and high permeability. This study was designed to enhance the aqueous solubility of KA, as well as its dissolution rate and, in turn, bioavailability, by formulating its smart nanocrystals. Nanocrystals of pure KA were formulated by the top-down method under high-pressure homogenization followed by freeze drying. The nanocrystals were evaluated for stability and other physical characteristics, including zeta sizer analysis, DSC, surface morphology, XRD, drug content, solubility, FTIR and in vitro drug release. The KA nanocrystals were found to be stable when kept at exaggerated conditions. The particle size of the nanocrystals was 137.5 ± 1.7, 150 ± 2.8, and 110 ± 3.0 nm for the F1, F2 and F3 formulations, respectively. There was negative zeta potential for all the formulations. The dispersity index was 0.45 ± 0.2, 0.36 ± 0.4 and 0.41 ± 1.5 for the F1, F2 and F3, respectively. The DSC studies showed that there was no interaction between the KA and the excipients of the nanocrystals. The morphological studies confirmed the presence of rough crystalline surfaces on the nanosized particles. XRD studies showed the successful preparation of nanocrystals. The drug content was in the official range of 90 ± 10%. The solubility of KA was significantly (p < 0.05) enhanced in the formulations of its nanocrystals as compared with pure KA powder. The ATR-FTIR studies revealed the presence of functional groups in both KA and KA-loaded nanocrystals, and no interaction was found between them. The nanocrystals released 83.93 ± 1.22% of KA in 24 h. The study concluded that the nanocrystals were successfully formulated using the top-down method followed by high-pressure homogenization. The solubility, as well as the dissolution, of the KA was enhanced, and this could improve the therapeutic effects of KA.

Formulation and Evaluation of Topical Linezolid Nanoemulsion for Open Incision Wound in Diabetic Animal Model.

The present study aimed to investigate the role of topical nanoemulsion of linezolid in attenuating diabetic wound by delivering the drug to the target tissue. The nanoemulsions (NEs) were prepared by high-pressure homogenization and subjected to thermodynamic stability, pH, droplet size, viscosity, surface charge, polydispersity index (PDI), entrapment efficiency, drug content, and in vitro drug release. All formulations were thermodynamically stable. The pH was in the range of 5 to 6. The viscosities of LZD-0, LZD-1, LZD-2, and LZD-3 were recorded as 68.75 ± 2.23 mPas, 69.56 ± 2.11 mPas, 96.45 ± 3.39 mPas, and 45.5 ± 1.12 mPas respectively. LZD-1 exhibited droplet size of 376.5 nm ± 0.98, surface charge - 22.5mV, and PDI 0.387. Drug content and entrapment efficiency of LZD-1 were found to be 93 ± 3.31 % and 72 ± 1.67 %, respectively. LZD-1 released 80 ± 2.87% of drug. Due to significant (P < 0.05) in vitro results, LZD-1 formulation was selected for in vivo evaluation. Diabetes was induced in Sprague-Dawley rats using intraperitoneal streptozotocin injection at dose of 50 mg/kg. Open-incision wounds were inflicted among all diabetic rats at dorsal shaved area. Randomly, all rats were divided into positive control (blank formulation), negative control (no formulation), and test group (LZD-1). Wound healing occurred in order of test group > positive control > negative control. Skin histology and tensile strength also revealed significant results. The study concluded that topical nanoemulsion of linezolid may open new horizon in treating diabetic wounds.

Two Promising Anti-Cancer Compounds, 2-Hydroxycinnaldehyde and 2- Benzoyloxycinnamaldehyde: Where do we stand?

Natural bioactive compounds with anti-carcinogenic activity are gaining tremendous interest in the field of oncology. Cinnamon, an aromatic condiment commonly used in tropical regions, appeared incredibly promising as an adjuvant for cancer therapy. Indeed, its whole or active parts (e.g., bark, leaf) exhibited significant anti-carcinogenic activity, which is mainly due to two cinnamaldehyde derivatives, namely 2-hydroxycinnaldehyde (HCA) and 2- benzoyloxycinnamaldehyde (BCA). In addition to their anti-cancer activity, HCA and BCA exert immunomodulatory, anti-platelets, and anti-inflammatory activities. The highly reactive α,ßunsaturated carbonyl pharmacophore, called Michael acceptor, contributes to their therapeutic effects. The molecular mechanisms underlying their anti-tumoral and anti-metastatic effects are miscellaneous, strongly suggesting that these compounds are multi-targeting compounds. Nevertheless, unravelling the exact molecular mechanisms of HCA and BCA remains a challenging matter which is necessary for optimal controlled-drug targeting delivery, safety, and efficiency. Eventually, their poor pharmacological properties (e.g., systemic bioavailability and solubility) represent a limitation and depend both on their administration route (e.g., per os, intravenously) and the nature of the formulation (e.g., free, smart nano-). This concise review focused on the potential of HCA and BCA as adjuvants in cancer. We describe their medicinal effects as well as provide an update about their molecular mechanisms reported either in-vitro, ex-vivo, or in animal models.

Carbopol emulgel loaded with ebastine for urticaria: development, characterization, in vitro and in vivo evaluation.

Urticaria affects all age groups of a population. It is triggered by allergens in foods, insect bites, medications, and environmental conditions. Urticaria is characterized by itching, a burning sensation, wheals and flares, erythema, and localized edema. The aim of this study was to develop a polymeric dosage form of ebastine using Carbopol 940 and mixture of span and tween. The emulsion was prepared, the gelling agent was added and the desired emulgel loaded with active drug was formulated. The formulations were subjected to physical stability, pH, viscosity, spreadability, drug content analysis, thermal analysis, in vitro drug release, and in vivo anti-allergic activity in animal model. The formulated emulgel exhibited good physical stability. The pH of the formulation was in the range of 5.2 ± 0.17 to 5.5 ± 0.20 which is suitable for topical application. Insignificant changes (p > .05) were observed in viscosity and spreadability of stored emulgels. The drug content was in the official limit of Pharmacopeia (i.e. 100 ± 10%). DSC measurements predicted that there is no interaction between the active moiety and excipients in emulgel formulation. The optimized formulation (ES3) released 74.25 ± 1.8% of ebastine after 12 h. The ebastine emulgel showed significant (p < .05; ANOVA) in vivo anti-allergic activity as compared to commercial product Benadryl® in histamine-induced allergy in rabbits. This study concluded that a topical drug delivery of ebastine-loaded emulgel could be well tolerated and safe for the treatment of urticaria/hives.

Development of Chitosan-Based Nanoemulsion Gel Containing Microbial Secondary Metabolite with Effective Antifungal Activity: In vitro and in vivo Characterizations.

PURPOSE: Microbial resistance to antibiotics is one of the most important public health concerns of the 21st century. We isolated, purified, and structurally elucidated antifungal secondary metabolites from red soil microbes and encapsulated them into chitosan (CS)-based nanoemulsion (NE) gel (NEG). METHODS: Three compounds were isolated and purified of which only one compound (Pure 2) showed potent antifungal activity (MFC: 8-132 µg/mL), which was also significantly (P<0.05) more efficient than fluconazole (MFC: 32-132 µg/mL). Pure 2 was structurally elucidated using 1D- and 2D-NMR before its incorporation into NEG. The formulations were prepared by high-speed homogenization technique. Physicochemical and pharmacological characterizations of formulations (ie, droplet size, PDI, zeta potential, drug content, viscosity, SEM, FTIR, spreadability, in vitro drug release, ex vivo permeation, in vitro antifungal and in vivo antifungal activities) were assessed. RESULTS: NMR analyses identified the compound as a derivative of phthalic acid ester (PAE). The optimized formulations displayed a droplet size <100 nm, -ve zeta potential, and PDI <0.45. The drug content was within the official limit of pharmacopeia (ie, 100±10%). Insignificant changes (P>0.05) in the viscosity of the formulations stored were observed. The morphology of the formulations indicated mesh-like structure. The FTIR study indicated that there were no interactions between the drug and other ingredients of the formulations. Optimum spreadability was observed in all formulations. NEG released 75.3±1.12% of Pure 2 after 12 hrs while NE released 85.33±1.88% of the compound. The skin permeation of F2 (71.15±1.28%) was significantly different (P<0.05) from F3 (81.80±1.91%) in rabbits. Complete and apparently safe recovery from the fungal infection was achieved in rabbits treated topically with Pure 2-loaded NEGs. CONCLUSION: Hence, the NEG-loaded PAE isolated from Pseudomonas fluorescens represents a possible alternative for the treatment of fungal infections as compared to available therapies.

Fabrication and Characterization of Polymeric Pharmaceutical Emulgel Co-Loaded with Eugenol and Linalool for the Treatment of Trichophyton rubrum Infections.

Trichophyton rubrum (T. rubrum) is the main cause of chronic dermatophytosis which is highly prevalent worldwide. This study was aimed to fabricate and characterize polymeric emulgel of eugenol and linalool for the treatment of T. rubrum infections. Using the slow emulsification method, the emulgel was prepared and characterized for thermodynamic stability, pH analysis, viscosity, spreadability, swelling behavior, %drug content, surface morphology, globules size, polydispersity index, surface charge (mV), thermal behavior, in vitro drug release and XRD studies. Biological activities of emulgel were conducted against T. rubrum in vitro and in vivo. Results indicated that emulgel formulations were thermodynamically stable. The pH of the formulations was within an acceptable range for skin. The viscosity and spreadability were optimum for the better patient compliance. The swelling behavior was 111.10 ± 1.25% after 90 min. The drug content was within the official pharmacopeia limit i.e., 100 ± 10%. The surface morphology revealed by scanning electron microscopy showed a spherical-shaped structure with characteristic larger cracks and wrinkles. The droplet size, PDI, and surface charge of the optimized emulgel were 888.45 ± 8.78 nm, 0.44 and -20.30 mV, respectively. The emulgel released 84.32% of eugenol and 76.93% of linalool after 12 h. There was complete disappearance of the diffraction peaks corresponding to the drugs after XRD analysis. In rabbits, the infection was safely and completely recovered after 12 days and the emulgel produced significant effects (p < 0.05) similar to the standard product Clotrim®. It is concluded that the eugenol-linalool emulgel best described all its physical properties and can be applied topically for the treatment of T. rubrum infections.