RESUMEN
BACKGROUND. MRI utility for patients 45 years old and older with hip or knee pain is not well established. OBJECTIVE. We performed this systematic review to assess whether MRI-diagnosed hip or knee pathology in patients 45 years old and older correlates with symptoms or benefits from arthroscopic surgery. EVIDENCE ACQUISITION. A literature search (PubMed, Web of Science, Embase) of articles published before October 3, 2022, was performed to identify original research pertaining to the study question. Publication information, study design, cohort size, osteoarthritis severity, age (range, mean), measured outcomes, minimum follow-up length, and MRI field strength were extracted. Study methods were appraised with NIH's study quality assessment tools. EVIDENCE SYNTHESIS. The search yielded 1125 potential studies, of which 31 met the inclusion criteria (18 knee, 13 hip). Knee studies (10 prospective, eight retrospective) included 5907 patients (age range, 45-90 years). Bone marrow edema-like lesions, joint effusions, and synovitis on MRI were associated with symptoms. In patients with osteoarthritis, meniscal tears were less likely to be symptom generators and were less likely to respond to arthroscopic surgery with osteoarthritis progression. Hip studies (11 retrospective, two prospective) included 6385 patients (age range, 50 to ≥ 85 years). Patients with Tönnis grade 2 osteoarthritis and lower with and without femoroacetabular impingement (FAI) showed improved outcomes after arthroscopy, suggesting a role for MRI in the diagnosis of labral tears, chondral lesions, and FAI. Although this group benefited from arthroscopic surgery, outcomes were inferior to those in younger patients. Variability in study characteristics, follow-up, and outcome measures precluded a meta-analysis. CONCLUSION. In patients 45 years old and older, several knee structural lesions on MRI correlated with symptoms, representing potential imaging biomarkers. Meniscal tear identification on MRI likely has diminished clinical value as osteoarthritis progresses. For the hip, MRI can play a role in the diagnosis of labral tears, chondral lesions, and FAI in patients without advanced osteoarthritis. CLINICAL IMPACT. Several structural lesions on knee MRI correlating with symptoms may represent imaging biomarkers used as treatment targets. Osteoarthritis, not age, may play the greatest role in determining the utility of MRI for patients 45 years old and older with hip or knee pain.
Asunto(s)
Artralgia , Imagen por Resonancia Magnética , Anciano , Humanos , Persona de Mediana Edad , Artralgia/diagnóstico por imagen , Artralgia/etiología , Articulación de la Cadera/diagnóstico por imagen , Articulación de la Cadera/patología , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/patología , Imagen por Resonancia Magnética/métodos , Anciano de 80 o más AñosRESUMEN
BACKGROUND. The utility of 3-T MRI for diagnosing joint disorders is established, but its performance for diagnosing abnormalities around arthroplasty implants is unclear. OBJECTIVE. The purpose of this study was to compare 1.5-T and 3-T compressed sensing slice encoding for metal artifact correction (SEMAC) MRI for diagnosing peri-prosthetic abnormalities around hip, knee, and ankle arthroplasty implants. METHODS. Forty-five participants (26 women, 19 men; mean age ± SD, 71 ± 14 years) with symptomatic lower extremity arthroplasty (hip, knee, and ankle, 15 each) prospectively underwent consecutive 1.5- and 3-T MRI examinations with intermediate-weighted (IW) and STIR compressed sensing SEMAC sequences. Using a Likert scale, three radiologists evaluated the presence or absence of periprosthetic abnormalities, including bone marrow edema-like signal, osteolysis, stress reaction/fracture, synovitis, and tendon abnormalities and collections; image quality; and visibility of anatomic structures. Statistical analysis included nonparametric comparison and interchangeability testing. RESULTS. For diagnosing periprosthetic abnormalities, 1.5-T and 3-T compressed sensing SEMAC MRI were interchangeable. Across all three joints, 3-T MRI had lower noise than 1.5-T MRI (median IW and STIR scores at 3 T vs 1.5 T, 4 and 4 [range, 2-5 and 3-5] vs 3 and 3 [range, 2-5 and 2-4]; p < .01 for both), sharper edges (median IW and STIR scores at 3 T vs 1.5 T, 4 and 4 [both ranges, 2-5] vs 3 and 3 [range, 2-4 and 2-5]; p < .02 and p < .05), and more effective metal artifact reduction (median IW and STIR scores at 3 T vs 1.5 T, 4 and 4 [range, 3-5 and 2-5] vs 4 and 4 [both ranges, 3-5]; p < .02 and p = .72). Agreement was moderate to substantial for image contrast (IW and STIR, 0.66 and 0.54 [95% CI, 0.41-0.91 and 0.29-0.80]; p = .58 and p = .16) and joint capsule visualization (IW and STIR, 0.57 and 0.70 [range, 0.32-0.81 and 0.51-0.89]; p = .16 and p = .19). The bone-implant interface was more visible at 1.5 T (median IW and STIR scores, 4 and 4 [both ranges, 2-5] at 1.5 T vs 3 and 3 [both ranges, 2-5] at 3 T; p = .08 and p = .58), but periprosthetic tissues had superior visibility at 3 T (IW and STIR, 4 and 4 [both ranges, 3-5] at 3 T vs 4 and 4 [ranges, 2-5 and 3-5] at 1.5 T; p = .07 and p = .19). CONCLUSION. Optimized 1.5-T and 3-T compressed sensing SEMAC MRI are interchangeable for diagnosing periprosthetic abnormalities, although metallic artifacts are larger at 3 T. CLINICAL IMPACT. With compressed sensing SEMAC MRI, lower extremity arthroplasty implants can be imaged at 3 T rather than 1.5 T.
RESUMEN
ABSTRACT: Magnetic resonance imaging (MRI) provides essential information for diagnosing and treating musculoskeletal disorders. Although most musculoskeletal MRI examinations are performed at 1.5 and 3.0 T, modern low-field MRI systems offer new opportunities for affordable MRI worldwide. In 2021, a 0.55 T modern low-field, whole-body MRI system with an 80-cm-wide bore was introduced for clinical use in the United States and Europe. Compared with current higher-field-strength MRI systems, the 0.55 T MRI system has a lower total ownership cost, including purchase price, installation, and maintenance. Although signal-to-noise ratios scale with field strength, modern signal transmission and receiver chains improve signal yield compared with older low-field magnetic resonance scanner generations. Advanced radiofrequency coils permit short echo spacing and overall compacter echo trains than previously possible. Deep learning-based advanced image reconstruction algorithms provide substantial improvements in perceived signal-to-noise ratios, contrast, and spatial resolution. Musculoskeletal tissue contrast evolutions behave differently at 0.55 T, which requires careful consideration when designing pulse sequences. Similar to other field strengths, parallel imaging and simultaneous multislice acquisition techniques are vital for efficient musculoskeletal MRI acquisitions. Pliable receiver coils with a more cost-effective design offer a path to more affordable surface coils and improve image quality. Whereas fat suppression is inherently more challenging at lower field strengths, chemical shift selective fat suppression is reliable and homogeneous with modern low-field MRI technology. Dixon-based gradient echo pulse sequences provide efficient and reliable multicontrast options, including postcontrast MRI. Metal artifact reduction MRI benefits substantially from the lower field strength, including slice encoding for metal artifact correction for effective metal artifact reduction of high-susceptibility metallic implants. Wide-bore scanner designs offer exciting opportunities for interventional MRI. This review provides an overview of the economical aspects, signal and image quality considerations, technological components and coils, musculoskeletal tissue relaxation times, and image contrast of modern low-field MRI and discusses the mainstream and new applications, challenges, and opportunities of musculoskeletal MRI.
Asunto(s)
Artefactos , Sistema Musculoesquelético , Imagen por Resonancia Magnética/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Relación Señal-Ruido , Sistema Musculoesquelético/diagnóstico por imagenRESUMEN
Postoperative MR imaging of joints is now commonly requested, yet artifacts caused by metallic orthopedic implants remain a significant challenge during image interpretation. Effective artifact reduction is essential to identify postsurgical complications, such as prosthesis loosening, infection, adverse local tissue reaction, and periarticular soft tissue injuries. This article reviews basic and advanced metal artifact reduction MR imaging techniques applied to various clinical protocols for successful postoperative MR imaging of small and large joints.
Asunto(s)
Imagen por Resonancia Magnética , Metales , Artefactos , Humanos , Imagen por Resonancia Magnética/métodos , Prótesis e ImplantesRESUMEN
Flexible radiofrequency coils for magnetic resonance imaging (MRI) have garnered attention in research and industrial communities because they provide improved accessibility and performance and can accommodate a range of anatomic postures. Most recent flexible coil developments involve customized conductors or substrate materials and/or target applications at 3 T or above. In contrast, we set out to design a flexible coil based on an off-the-shelf conductor that is suitable for operation at 0.55 T (23.55 MHz). Signal-to-noise ratio (SNR) degradation can occur in such an environment because the resistance of the coil conductor can be significant with respect to the sample. We found that resonating a commercially available RG-223 coaxial cable shield with a lumped capacitor while the inner conductor remained electrically floating gave rise to a highly effective "cable coil." A 10-cm diameter cable coil was flexible enough to wrap around the knee, an application that can benefit from flexible coils, and had similar conductor loss and SNR as a standard-of-reference rigid copper coil. A two-channel cable coil array also provided good SNR robustness against geometric variability, outperforming a two-channel coaxial coil array by 26 and 16% when the elements were overlapped by 20-40% or gapped by 30-50%, respectively. A 6-channel cable coil array was constructed for 0.55 T knee imaging. Incidental cartilage and bone pathologies were clearly delineated in T1- and T2-weighted turbo spin echo images acquired in 3-4 min with the proposed coil, suggesting that clinical quality knee imaging is feasible in an acceptable examination timeframe. Correcting for T1, the SNR measured with the cable coil was approximately threefold lower than that measured with a 1.5 T state-of-the-art 18-channel coil, which is expected given the threefold difference in main magnetic field strength. This result suggests that the 0.55 T cable coil conductor loss does not deleteriously impact SNR, which might be anticipated at low field.
Asunto(s)
Articulación de la Rodilla , Imagen por Resonancia Magnética , Diseño de Equipo , Articulación de la Rodilla/diagnóstico por imagen , Imagen por Resonancia Magnética/métodos , Fantasmas de Imagen , Ondas de Radio , Relación Señal-RuidoRESUMEN
Total hip arthroplasty and hip preservation surgeries have substantially increased over the past few decades. Musculoskeletal imaging and interventions are cornerstones of comprehensive postoperative care and surveillance in patients undergoing established and more recently introduced hip surgeries. Hence the radiologist's role continues to evolve and expand. A strong understanding of hip joint anatomy and biomechanics, surgical procedures, expected normal postoperative imaging appearances, and postoperative complications ensures accurate imaging interpretation, intervention, and optimal patient care. This article presents surgical principles and procedural details pertinent to postoperative imaging evaluation strategies after common hip surgeries, such as radiography, ultrasonography, computed tomography, and magnetic resonance imaging. We review and illustrate the expected postoperative imaging appearances and complications following chondrolabral repair, acetabuloplasty, osteochondroplasty, periacetabular osteotomy, realigning and derotational femoral osteotomies, and hip arthroplasty.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Articulación de la Cadera/diagnóstico por imagen , Articulación de la Cadera/patología , Articulación de la Cadera/cirugía , Humanos , Osteotomía/métodos , Periodo Posoperatorio , CintigrafíaRESUMEN
The posteromedial and posterolateral corners of the knee are important areas to consider when assessing the patient with a possible knee injury. An understanding of the anatomy, associated biomechanics, and typical injury patterns in these regions will improve the value that the radiologist interpreting the MRIs brings to this patient population.
Asunto(s)
Traumatismos de la Rodilla , Imagen por Resonancia Magnética , Fenómenos Biomecánicos , Humanos , Rodilla/diagnóstico por imagen , Traumatismos de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/anatomía & histología , Articulación de la Rodilla/diagnóstico por imagen , Imagen por Resonancia Magnética/métodosRESUMEN
The purpose of this article is to present algorithms for the diagnostic management of solitary bone lesions incidentally encountered on computed tomography (CT) and magnetic resonance (MRI) in adults. Based on review of the current literature and expert opinion, the Practice Guidelines and Technical Standards Committee of the Society of Skeletal Radiology (SSR) proposes a bone reporting and data system (Bone-RADS) for incidentally encountered solitary bone lesions on CT and MRI with four possible diagnostic management recommendations (Bone-RADS1, leave alone; Bone-RADS2, perform different imaging modality; Bone-RADS3, perform follow-up imaging; Bone-RADS4, biopsy and/or oncologic referral). Two algorithms for CT based on lesion density (lucent or sclerotic/mixed) and two for MRI allow the user to arrive at a specific Bone-RADS management recommendation. Representative cases are provided to illustrate the usability of the algorithms.
Asunto(s)
Radiología , Tomografía Computarizada por Rayos X , Adulto , Algoritmos , Humanos , Imagen por Resonancia Magnética/métodos , Tomografía Computarizada por Rayos X/métodosRESUMEN
OBJECTIVES: Despite significant progress, artifact-free visualization of the bone and soft tissues around hip arthroplasty implants remains an unmet clinical need. New-generation low-field magnetic resonance imaging (MRI) systems now include slice encoding for metal artifact correction (SEMAC), which may result in smaller metallic artifacts and better image quality than standard-of-care 1.5 T MRI. This study aims to assess the feasibility of SEMAC on a new-generation 0.55 T system, optimize the pulse protocol parameters, and compare the results with those of a standard-of-care 1.5 T MRI. MATERIALS AND METHODS: Titanium (Ti) and cobalt-chromium total hip arthroplasty implants embedded in a tissue-mimicking American Society for Testing and Materials gel phantom were evaluated using turbo spin echo, view angle tilting (VAT), and combined VAT and SEMAC (VAT + SEMAC) pulse sequences. To refine an MRI protocol at 0.55 T, the type of metal artifact reduction techniques and the effect of various pulse sequence parameters on metal artifacts were assessed through qualitative ranking of the images by 3 expert readers while taking measured spatial resolution, signal-to-noise ratios, and acquisition times into consideration. Signal-to-noise ratio efficiency and artifact size of the optimized 0.55 T protocols were compared with the 1.5 T standard and compressed-sensing SEMAC sequences. RESULTS: Overall, the VAT + SEMAC sequence with at least 6 SEMAC encoding steps for Ti and 9 for cobalt-chromium implants was ranked higher than other sequences for metal reduction ( P < 0.05). Additional SEMAC encoding partitions did not result in further metal artifact reductions. Permitting minimal residual artifacts, low magnetic susceptibility Ti constructs may be sufficiently imaged with optimized turbo spin echo sequences obviating the need for SEMAC. In cross-platform comparison, 0.55 T acquisitions using the optimized protocols are associated with 45% to 64% smaller artifacts than 1.5 T VAT + SEMAC and VAT + compressed-sensing/SEMAC protocols at the expense of a 17% to 28% reduction in signal-to-noise ratio efficiency. B 1 -related artifacts are invariably smaller at 0.55 T than 1.5 T; however, artifacts related to B 0 distortion, although frequently smaller, may appear as signal pileups at 0.55 T. CONCLUSIONS: Our results suggest that new-generation low-field SEMAC MRI reduces metal artifacts around hip arthroplasty implants to better advantage than current 1.5 T MRI standard of care. While the appearance of B 0 -related artifacts changes, reduction in B 1 -related artifacts plays a major role in the overall benefit of 0.55 T.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Artefactos , Cromo , Cobalto , Aumento de la Imagen/métodos , Imagen por Resonancia Magnética/métodos , TitanioRESUMEN
Numerous primary and metastatic osseous lesions and incidental osseous findings are encountered at fluorine 18 (18F) fluorodeoxyglucose (FDG) PET/CT. These lesions show varying degrees of FDG uptake. Malignancies are generally more FDG avid than are benign lesions, but many exceptions exist. Although aggressive lesions tend to be more FDG avid than nonaggressive lesions, this concept holds true particularly for lesions of the same histologic subtype. In addition, some benign osseous processes such as Paget disease have variable degrees of FDG avidity on the basis of disease metabolic activity. This creates a diagnostic dilemma for radiologists and clinicians, especially in patients with known malignancies, and can result in unnecessary diagnostic imaging or interventions for incidental osseous lesions. Evaluation of morphologic CT characteristics of osseous lesions at FDG PET/CT can be a valuable adjunct to metabolic analysis to further characterize lesions, enhance diagnostic and staging accuracy, and avoid unnecessary invasive biopsy procedures. The authors review the common primary and metastatic bone lesions at FDG PET/CT, with an emphasis on morphologic CT assessment of lesions to help narrow the differential diagnosis. Imaging manifestations of common incidental nonneoplastic bone lesions at FDG PET/CT are discussed to provide information on differentiation of these lesions from osseous neoplasms. The guidelines of the National Comprehensive Cancer Network (NCCN) for common primary osseous malignancies are also summarized. Online supplemental material is available for this article. ©RSNA, 2021.
Asunto(s)
Neoplasias Óseas , Fluorodesoxiglucosa F18 , Neoplasias Óseas/diagnóstico por imagen , Neoplasias Óseas/patología , Huesos , Humanos , Tomografía Computarizada por Tomografía de Emisión de Positrones/métodos , Tomografía de Emisión de Positrones , Radiofármacos , Estudios RetrospectivosRESUMEN
Ankle sprain is the most common injury in athletic populations. Ligament and tendon pathologies of the ankle are common, ranging from traumatic injuries to degeneration leading to chronic pain and acquired foot deformities. MRI is the imaging modality of choice to evaluate tendon and ligament pathology of the ankle, specifically derangements of tendons and ligaments. 3-T MRI offers improved imaging characteristics relative to 1.5-T MRI, allowing for better delineation of anatomic detail and pathology. This article provides a review of the anatomy and common pathologies of the ankle ligaments and tendons using high-resolution 3-T MRI.
Asunto(s)
Tobillo , Traumatismos de los Tendones , Tobillo/diagnóstico por imagen , Humanos , Ligamentos Articulares/diagnóstico por imagen , Imagen por Resonancia Magnética , Traumatismos de los Tendones/diagnóstico por imagen , Tendones/diagnóstico por imagenRESUMEN
Calvarial abnormalities are usually discovered incidentally on radiologic studies or less commonly manifest with symptoms. This narrative review describes the imaging spectrum of the abnormal calvaria. The extent, multiplicity, and other imaging features of calvarial abnormalities can be combined with the clinical information to establish a final diagnosis or at least narrow the differential considerations. Prior trauma (congenital depression, leptomeningeal cysts, posttraumatic osteolysis), surgical intervention (flap osteonecrosis and burr holes), infection, and inflammatory processes (sarcoidosis) can result in focal bone loss, which may also be seen with idiopathic disorders without (bilateral parietal thinning and Gorham disease) or with (Parry-Romberg syndrome) atrophy of the overlying soft tissues. Anatomic variants (arachnoid granulations, venous lakes, parietal foramina) and certain congenital lesions (epidermoid and dermoid cysts, atretic encephalocele, sinus pericranii, and aplasia cutis congenita) manifest as solitary lytic lesions. Other congenital entities (lacunar skull and dysplasia) display a diffuse pattern of skull involvement. Several benign and malignant primary bone tumors involve the calvaria and manifest as lytic, sclerotic, mixed lytic and sclerotic, or thinning lesions, whereas multifocal disease is mainly due to hematologic or secondary malignancies. Metabolic disorders such as rickets, hyperparathyroidism, renal osteodystrophy, acromegaly, and Paget disease involve the calvaria in a more diffuse pattern. Online supplemental material is available for this article. ©RSNA, 2021.
Asunto(s)
Enfermedades Óseas Metabólicas , Osteólisis , Diagnóstico por Imagen , Encefalocele , Humanos , Cráneo/diagnóstico por imagenRESUMEN
ABSTRACT: Musculoskeletal magnetic resonance imaging (MRI) is a careful negotiation between spatial, temporal, and contrast resolution, which builds the foundation for diagnostic performance and value. Many aspects of musculoskeletal MRI can improve the image quality and increase the acquisition speed; however, 3.0-T field strength has the highest impact within the current diagnostic range. In addition to the favorable attributes of 3.0-T field strength translating into high temporal, spatial, and contrast resolution, many 3.0-T MRI systems yield additional gains through high-performance gradients systems and radiofrequency pulse transmission technology, advanced multichannel receiver technology, and high-end surface coils. Compared with 1.5 T, 3.0-T MRI systems yield approximately 2-fold higher signal-to-noise ratios, enabling 4 times faster data acquisition or double the matrix size. Clinically, 3.0-T field strength translates into markedly higher scan efficiency, better image quality, more accurate visualization of small anatomic structures and abnormalities, and the ability to offer high-end applications, such as quantitative MRI and magnetic resonance neurography. Challenges of 3.0-T MRI include higher magnetic susceptibility, chemical shift, dielectric effects, and higher radiofrequency energy deposition, which can be managed successfully. The higher total cost of ownership of 3.0-T MRI systems can be offset by shorter musculoskeletal MRI examinations, higher-quality examinations, and utilization of advanced MRI techniques, which then can achieve higher gains and value than lower field systems. We provide a practice-focused review of the value of 3.0-T field strength for musculoskeletal MRI, practical solutions to challenges, and illustrations of a wide spectrum of gainful clinical applications.
Asunto(s)
Aumento de la Imagen , Imagen por Resonancia Magnética , Espectroscopía de Resonancia Magnética , Magnetismo , Relación Señal-RuidoRESUMEN
OBJECTIVES: The aim of this study was to quantify the spatial temperature rises that occur during 1.5- and 3.0-T magnetic resonance imaging (MRI) of different types of hip arthroplasty implants using different metal artifact reduction techniques. MATERIALS AND METHODS: Using a prospective in vitro study design, we evaluated the spatial temperature rises of 4 different total hip arthroplasty constructs using clinical metal artifact reduction techniques including high-bandwidth turbo spin echo (HBW-TSE), slice encoding for metal artifact correction (SEMAC), and compressed sensing SEMAC at 1.5 and 3.0 T. Each MRI protocol included 6 pulse sequences, with imaging planes, parameters, and coverage identical to those in patients. Implants were immersed in standard American Society for Testing and Materials phantoms, and fiber optic sensors were used for temperature measurement. Effects of field strength, radiofrequency pulse polarization at 3.0 T, pulse protocol, and gradient coil switching on heating were assessed using nonparametric Friedman and Wilcoxon signed-rank tests. RESULTS: Across all implant constructs and MRI protocols, the maximum heating at any single point reached 13.1°C at 1.5 T and 1.9°C at 3.0 T. The temperature rises at 3.0 T were similar to that of background in the absence of implants (P = 1). Higher temperature rises occurred at 1.5 T compared with 3.0 T (P < 0.0001), and circular compared with elliptical radiofrequency pulse polarization (P < 0.0001). Compressed sensing SEMAC generated equal or lower degrees of heating compared with HBW-TSE at both field strengths (P < 0.0001). CONCLUSIONS: Magnetic resonance imaging of commonly used total hip arthroplasty implants is associated with variable degrees of periprosthetic tissue heating. In the absence of any perfusion effects, the maximum temperature rises fall within the physiological range at 3.0 T and within the supraphysiologic range at 1.5 T. However, with the simulation of tissue perfusion effects, the heating at 1.5 T also reduces to the upper physiologic range. Compressed sensing SEMAC metal artifact reduction MRI is not associated with higher degrees of heating than the HBW-TSE technique.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Artefactos , Calefacción , Humanos , Imagen por Resonancia Magnética , Estudios ProspectivosRESUMEN
OBJECTIVE: To evaluate the effect of circular polarization (CP) and elliptical polarization (EP) of the B1 field on metal implant-induced artifacts of titanium (Ti) and cobalt-chromium (CoCr) hip arthroplasty implants at 1.5-T and 3.0-T field strengths. MATERIAL AND METHODS: In vitro Ti and CoCr total hip arthroplasty implants were evaluated using high transmit and receive bandwidth turbo spin echo (HBW-TSE) and slice encoding for metal artifact correction (SEMAC) metal artifact reduction techniques. Each technique was implemented at 1.5-T, which only allows for CP of B1 field as the system default, as well as 3.0-T, which permitted CP and EP. Manual segmentation quantified the size of the metal artifacts at the level of the acetabular cup, femoral neck, and femoral shaft. RESULTS: In the acetabular cup and femoral neck, 1.5-T CP achieved smaller artifact sizes than 3.0-T CP (28-29% on HBW-TSE, p = 0.002-0.005; 17-34% on SEMAC, p = 0.019-0.102) and 3.0-T EP (25-28% on HBW-TSE, p = 0.010-0.011; 14-36% on SEMAC, p = 0.058-0.135) techniques. In the femoral stem region, 3.0-T EP achieved more efficient artifact suppression than 3.0-T CP (HBW-TSE 44-45%, p < 0.001-0.022; SEMAC 76-104%, p < 0.001-0.022) and 1.5-T CP (HBW-TSE 76-96%, p < 0.001-0.003; SEMAC 138-173%, p = 0.003-0.005) techniques. CONCLUSION: Despite slightly superior metal reduction ability of the 1.5-T in the region of the acetabular cup and prosthesis neck, 3.0-T MRI of hip arthroplasty implants using elliptically polarized RF pulses may overall be more effective in reducing metal artifacts than the current standard 1.5-T MRI techniques, which by default implements circularly polarized RF pulses.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Artefactos , Humanos , Imagen por Resonancia Magnética , Metales , Prótesis e ImplantesRESUMEN
OBJECTIVES: The aim of this study was to test the hypothesis that clinically used magnetic resonance (MR)-conditional needles of varying lengths, orientations, locations, and pulse sequences can result in excessive heating during MR imaging (MRI)-guided interventions that can be minimized to physiological ranges with proper selection of the needle length, needle position, and modification of pulse sequence parameters. MATERIALS AND METHODS: We simulated a clinical interventional MRI setting with 2 standard American Society for Testing and Materials F2182-11A phantoms and measured temperatures with fiber optic sensors. Temperature profiles were monitored for commercial 10, 15 and 20 cm MR-conditional cobalt-chromium needles in clinically relevant perpendicular, 45-degree oblique, and parallel orientations relative to the static magnetic field (B0) and center, right off-center, and left off-center needle tip locations in the z = 0 plane. Clinically available interventional MRI pulse sequences including turbo spin echo (TSE), fast TSE, slice encoding for metal artifact correction, compressed sensing slice encoding for metal artifact correction, half-Fourier acquisition single-shot TSE (HASTE), HASTE inversion recovery, fluoroscopic steady-state gradient echo (3.0 T only), fast low-angle shot gradient echo, and volumetric interpolated breath-hold examination gradient echo pulse sequences were tested at 1.5 and 3.0 T field strengths. Acquired temperature data were analyzed using Friedman and Wilcoxon signed-rank tests with Bonferroni correction. RESULTS: After 5-minute of continuous MRI, less than 2.5°C heating occurred when needles were oriented perpendicular and 45-degree oblique to B0, regardless of field strengths. Higher temperature rises capable of causing permanent tissue damage were observed when needles were oriented in parallel to B0 (1.5 T: 22°C with 20 cm needles, 3.0 T: 8°C with 10 and 15 cm needles) using higher radiofrequency energy pulse sequences, such as TSE and HASTE. Left off-center location, parallel orientation, and needle lengths close to half of the radiofrequency pulse wavelength were positively associated with higher temperature rises. CONCLUSIONS: Under the herein used experimental conditions, clinically used MR-conditional needles can heat to supraphysiologic temperatures during prolonged MRI at 1.5 and 3.0 T field strengths; however, the temperature rise can be balanced to physiological ranges with proper selection of needle length, needle orientation, and pulse sequence parameters. Caution must be exercised when using different MRI systems, as results may not directly translate.
Asunto(s)
Artefactos , Calefacción/métodos , Imagen por Resonancia Magnética Intervencional/métodos , Fantasmas de Imagen , Humanos , Reproducibilidad de los ResultadosRESUMEN
Osteoarthritis (OA) is the most common joint disease in the United States. The prevalence of OA is rising due to an aging population and increasing rates of obesity. Magnetic resonance imaging (MRI) allows an incomparable noninvasive assessment of all joint structures. Irreversible and progressive degradation of the articular cartilage remains the hallmark feature of OA. To date, attempts at developing disease-modifying drugs or biomechanical interventions for treating OA have proven unsuccessful. MRI-based cartilage imaging techniques have continued to advance, however, and will likely play a central role in the development of these joint preservation methods of the future. In this narrative review, we describe clinical MR image acquisition and assessment of cartilage. We discuss the semiquantitative cartilage scoring methods used in research. Lastly, we review the quantitative MRI techniques that allow assessment of changes in the biochemical composition of cartilage, even before the morphological changes are evident.
Asunto(s)
Cartílago Articular/diagnóstico por imagen , Articulaciones/diagnóstico por imagen , Imagen por Resonancia Magnética/métodos , Osteoartritis/diagnóstico por imagen , HumanosRESUMEN
Promising outcomes of hip replacement interventions in this era of aging populations have led to higher demands for hip arthroplasty procedures. These require effective methods and techniques for the detection of postoperative outcomes and complications. Based on the presence or absence of radiographic findings, magnetic resonance imaging (MRI) and computed tomography (CT) may be required to detect and further characterize different causes of failing implants. Yet metal-related artifacts degrade image quality and pose significant challenges for adequate image quality. To mitigate such artifacts in MRI, a set of techniques, collectively known as metal artifact reduction sequence (MARS) MRI, were developed that optimize the framework of the conventional pulse sequences and exploit novel multispectral and multispatial imaging methods such as Slice Encoding for Metal Artifact Correction (SEMAC) and Multi-Acquisition Variable-Resonance Image Combination (MAVRIC). Metal-induced artifacts on CT can be effectively reduced with virtual monochromatic reconstruction of dual-energy CT data sets, metal artifact reduction reconstruction algorithms, and postprocessing image visualization techniques.
Asunto(s)
Artefactos , Articulación de la Cadera/diagnóstico por imagen , Interpretación de Imagen Asistida por Computador/métodos , Imagen por Resonancia Magnética/métodos , Metales , Tomografía Computarizada por Rayos X/métodos , Artroplastia de Reemplazo de Cadera , HumanosRESUMEN
Lower extremity superficial venous aneurysms are occasionally encountered by clinicians and are almost always located above the knee. Very few cases of aneurysm of the medial marginal vein in the most distal part, near the origin of the great saphenous vein, have been reported. We present a case of partially thrombosed aneurysm of the medial marginal vein, and briefly review the imaging characteristics and treatment options of this entity. Being aware of the existence of superficial venous aneurysms may help clinicians in their differential diagnosis of foot masses and choice of appropriate treatment.
Asunto(s)
Aneurisma/diagnóstico por imagen , Trombosis/diagnóstico por imagen , Aneurisma/patología , Tobillo/diagnóstico por imagen , Diagnóstico Diferencial , Femenino , Enfermedades del Pie/diagnóstico por imagen , Humanos , Pierna/irrigación sanguínea , Masculino , Persona de Mediana Edad , Vena Safena/diagnóstico por imagen , Vena Safena/patología , Trombosis/patologíaRESUMEN
BACKGROUND: To investigate the reliability and reproducibility of syndesmosis measurements on weightbearing (WB) cone-beam computed tomography (CBCT) images and compare them with measurements obtained using non-weightbearing (NWB) images. METHODS: In this IRB-approved, retrospective study of 5 men and 9 women with prior ankle injuries, simultaneous WB and NWB CBCT scans were taken. A set of 21 syndesmosis measurements using WB and NWB images were performed by 3 independent observers. Pearson/Spearman correlation and intra-class correlation (ICC) were used to assess intra- and inter-observer reliability, respectively. RESULTS: We observed substantial to perfect intra-observer reliability (ICC=0.72-0.99) in 20 measurements. Moderate to perfect agreement (ICC=0.45-0.97) between observers was noted in 19 measurements. CONCLUSION: Measurements evaluating the distance between tibia and fibula in the axial plane 10mm above the plafond had high intra- and inter-observer reliability. Mean posterior tibio-fibular distance, diastasis, and angular measurement were significantly different between WB and NWB images.