RESUMEN
The activity and durability of chemical/electrochemical catalysts are significantly influenced by their surface environments, highlighting the importance of thoroughly examining the catalyst surface. Here, Cu-substituted La0.6Sr0.4Co0.2Fe0.8O3-δ is selected, a state-of-the-art material for oxygen reduction reaction (ORR), to explore the real-time evolution of surface morphology and chemistry under a reducing atmosphere at elevated temperatures. Remarkably, in a pioneering observation, it is discovered that the perovskite surface starts to amorphize at an unusually low temperature of approximately 100 °C and multicomponent metal nanocatalysts additionally form on the amorphous surface as the temperature raises to 400 °C. Moreover, this investigation into the stability of the resulting amorphous layer under oxidizing conditions reveals that the amorphous structure can withstand a high-temperature oxidizing atmosphere (≥650 °C) only when it has undergone sufficient reduction for an extended period. Therefore, the coexistence of the active nanocatalysts and defective amorphous surface leads to a nearly 100% enhancement in the electrode resistance for the ORR over 200 h without significant degradation. These observations provide a new catalytic design strategy for using redox-dynamic perovskite oxide host materials.
RESUMEN
Exsolution generates metal nanoparticles anchored within crystalline oxide supports, ensuring efficient exposure, uniform dispersion, and strong nanoparticle-perovskite interactions. Increased doping level in the perovskite is essential for further enhancing performance in renewable energy applications; however, this is constrained by limited surface exsolution, structural instability, and sluggish charge transfer. Here, hybrid composites are fabricated by vacuum-annealing a solution containing SrTiO3 photoanode and Co cocatalyst precursors for photoelectrochemical water-splitting. In situ transmission electron microscopy identifies uniform, high-density Co particles exsolving from amorphous SrTiO3 films, followed by film-crystallization at elevated temperatures. This unique process extracts entire Co dopants with complete structural stability, even at Co doping levels exceeding 30%, and upon air exposure, the Co particles embedded in the film oxidize to CoO, forming a Schottky junction at the interface. These conditions maximize photoelectrochemical activity and stability, surpassing those achieved by Co post-deposition and Co exsolution from crystalline oxides. Theoretical calculations demonstrate in the amorphous state, dopantâO bonds become weaker while TiâO bonds remain strong, promoting selective exsolution. As expected from the calculations, nearly all of the 30% Fe dopants exsolve from SrTiO3 in an H2 environment, despite the strong FeâO bond's low exsolution tendency. These analyses unravel the mechanisms driving the amorphous exsolution.
RESUMEN
Morphological measurements of nanoparticles in electron microscopy images are tedious, laborious, and often succumb to human errors. Deep learning methods in artificial intelligence (AI) paved the way for automated image understanding. This work proposes a deep neural network (DNN) for the automated segmentation of a Au spiky nanoparticle (SNP) in electron microscopic images, and the network is trained with a spike-focused loss function. The segmented images are used for the growth measurement of the Au SNP. The auxiliary loss function captures the spikes of the nanoparticle, which prioritizes the detection of spikes in the border regions. The growth of the particles measured by the proposed DNN is as good as the measurement in manually segmented images of the particles. The proposed DNN composition with the training methodology meticulously segments the particle and consequently provides accurate morphological analysis. Furthermore, the proposed network is tested on an embedded system for integration with the microscope hardware for real-time morphological analysis.
RESUMEN
Ultralow-k materials used in high voltage devices require mechanical resilience and electrical and dielectric stability even when subjected to mechanical loads. Existing devices with organic polymers suffer from low thermal and mechanical stability while those with inorganic porous structures struggle with poor mechanical integrity. Recently, 3D hollow-beam nanolattices have emerged as promising candidates that satisfy these requirements. However, their properties are maintained for only five stress cycles at strains below 25%. Here, we demonstrate that alumina nanolattices with different relative density distributions across their height elicit a deterministic mechanical response concomitant with a 1.5-3.3 times higher electrical breakdown strength than nanolattices with uniform density. These density-variant nanolattices exhibit an ultralow-k of ≈1.2, accompanied by complete electric and dielectric stability and mechanical recoverability over 100 cyclic compressions to 62.5% strain. We explain the enhanced insulation and long-term cyclical stability by the bi-phase deformation where the lower-density region protects the higher-density region as it is compressed before the higher-density region, allowing to simultaneously possess high strength and ductility like composites. This study highlights the superior electrical performance of the bi-phase nanolattice with a single interface in providing stable conduction and maximum breakdown strength.
RESUMEN
Solar-to-chemical energy conversion is a potential alternative to fossil fuels. A promising approach is the electrochemical (EC) reduction of CO2 to value-added chemicals, particularly hydrocarbons. Here, we report on the selective EC reduction of CO2 to CO on a porous Au nanostructure (pAu) cathode in 0.1 M KHCO3. The pAu cathode anodized at 2.6 V exhibited maximum Faradaic efficiency (FE) for conversion of CO2 to CO (up to 100% at -0.75 V vs reversible hydrogen electrode (RHE)). Furthermore, commercial Si photovoltaic cells were combined with EC systems (PV-EC) consisting of pAu cathodes and IrO2 anodes. The triple-junction cell and EC system resulted in a solar-to-CO conversion efficiency (SCE) of 5.3% under 1 sun illumination and was operated for 100 h. This study provides a PV-EC CO2 reduction system for CO production and indicates the potential of the PV-EC system for the EC reduction of CO2 to value-added chemicals.
RESUMEN
The ex-solution phenomenon has received attention as a promising technique to prepare highly durable heterogeneous catalysts. Perovskite materials have been mainly used as host oxides for ex-solution, but their small surface areas have limited their practical use. Here, Rh was ex-solved by reducing Rh-doped ceria solid solution, and nanosized Rh catalysts with a high surface area of 70.7 m2/g were prepared. The Rh nanoparticles ex-solved from the ceria nanodomains were directly monitored by in situ transmission electron microscopy. The Rh nanoparticles whose sizes are 2-3 nm were not coarsened during the propane steam reforming process carried out at 700 °C for 65 h, leading to high resistance against sintering and coke formation. On the contrary, the Rh catalyst simply deposited on CeO2 was significantly sintered after the reaction, and the size of Rh nanoparticles increased to 25 nm, resulting in severe coke formation. Our work shows that ex-solution from a ceria-based nanodomain can be a good way to prepare metal nanoparticle catalysts with a large surface area and excellent durability for gas-phase reactions at high temperatures.
RESUMEN
[This corrects the article DOI: 10.1021/acscentsci.0c00385.].
RESUMEN
The ex-solution phenomenon, a central platform for growing metal nanoparticles on the surface of host oxides in real time with high durability and a fine distribution, has recently been applied to various scientific and industrial fields, such as catalysis, sensing, and renewable energy. However, the high-temperature processing required for ex-solutions (>700 °C) limits the applicable material compositions and has hindered advances in this technique. Here, an unprecedented approach is reported for low-temperature particle ex-solution on important nanoscale binary oxides. WO3 with a nanosheet structure is selected as the parent oxide, and Ir serves as the active metal species that produces the ex-solved metallic particles. Importantly, Ir doping facilitates a phase transition in the WO3 bulk lattice, which further promotes Ir ex-solution at the oxide surface and eventually enables the formation of Ir particles (<3 nm) at temperatures as low as 300 °C. Low-temperature ex-solution effectively inhibits the agglomeration of WO3 sheets while maintaining well-dispersed ex-solved particles. Furthermore, the Ir-decorated WO3 sheets show excellent durability and H2 S selectivity when used as sensing materials, suggesting that this is a generalizable synthetic strategy for preparing highly robust heterogeneous catalysts for a variety of applications.
RESUMEN
ABO3 perovskite materials and their derivatives have inherent structural flexibility due to the corner sharing network of the BO6 octahedron, and the large variety of possible structural distortions and strong coupling between lattice and charge/spin degrees of freedom have led to the emergence of intriguing properties, such as high-temperature superconductivity, colossal magnetoresistance, and improper ferroelectricity. Here, an unprecedented polar ferromagnetic metal phase in SrRuO3 (SRO) thin films is presented, arising from the strain-controlled oxygen octahedral rotation (OOR) pattern. For compressively strained SRO films grown on SrTiO3 substrate, oxygen octahedral network relaxation is accompanied by structural phase separation into strained tetragonal and bulk-like orthorhombic phases, and the asymmetric OOR evolution across the phase boundary allows formation of the polar phase, while bulk metallic and ferromagnetic properties are maintained. From the results, it is expected that other oxide perovskite thin films will also yield similar structural environments with variation of OOR patterns, and thereby provide promising opportunities for atomic scale control of material properties through strain engineering.
RESUMEN
Catalysis with single-atom catalysts (SACs) exhibits outstanding reactivity and selectivity. However, fabrication of supports for the single atoms with structural versatility remains a challenge to be overcome, for further steps toward catalytic activity augmentation. Here, we demonstrate an effective synthetic approach for a Pt SAC stabilized on a controllable one-dimensional (1D) metal oxide nano-heterostructure support, by trapping the single atoms at heterojunctions of a carbon nitride/SnO2 heterostructure. With the ultrahigh specific surface area (54.29 m2 g-1) of the nanostructure, we obtained maximized catalytic active sites, as well as further catalytic enhancement achieved with the heterojunction between carbon nitride and SnO2. X-ray absorption fine structure analysis and HAADF-STEM analysis reveal a homogeneous atomic dispersion of Pt species between carbon nitride and SnO2 nanograins. This Pt SAC system with the 1D nano-heterostructure support exhibits high sensitivity and selectivity toward detection of formaldehyde gas among state-of-the-art gas sensors. Further ex situ TEM analysis confirms excellent thermal stability and sinter resistance of the heterojunction-immobilized Pt single atoms.
RESUMEN
Perovskite solar cells offer remarkable performance, but further advances will require deeper understanding and control of the materials and processing. Here, we fabricate the first single crystal nanorods of intermediate phase (MAI-PbI2-DMSO), allowing us to directly observe the phase evolution while annealing in situ in a high-vacuum transmission electron microscope, which lets up separate thermal effects from other environmental conditions such as oxygen and moisture. We attain the first full determination of the crystal structures and orientations of the intermediate phase, evolving perovskite, precipitating PbI2, and e-beam induced PbI2 during phase conversion and decomposition. Surprisingly, the perovskite decomposition to PbI2 is reversible upon cooling, critical for long-term device endurance due to the formation of MAI-rich MAPbI3 and PbI2 upon heating. Quantitative measurements with a thermodynamic model suggest the decomposition is entropically driven. The single crystal MAPbI3 nanorods obtained via thermal cycling exhibit excellent mobility and trap density, with full reversibility up to 100 °C (above the maximum temperature for solar cell operation) under high vacuum, offering unique potential for high-performance flexible solar cells.
RESUMEN
Organic photosensitizers have been investigated as effective light-sensing elements that can promote strong absorption with high field-effect mobility in organic phototransistors (OPTs). In this study, a novel organic photosensitizer is synthesized to demonstrate broad-band photoresponse with enhanced electrical performance. An unsymmetrical small molecule of a solubilizing donor (Dsol)-acceptor (A)-dye donor (Ddye) type connected with a twisted conjugation system is designed for broad-band detection (ranging from 250 to 700 nm). This molecule has high solubility, thereby facilitating the formation of uniformly dispersed nanoparticles in an insulating polymer matrix, which is deposited on top of OPT semiconductors by a simple solution process. The broad-band photodetection shown by the organic photosensitizer is realized with improved mobility close to an order of magnitude and high on/off current ratio (â¼105) of the organic semiconductor. Furthermore, p-type charge transport behavior in the channel of the OPT is enhanced through the intrinsic electron-accepting ability of the organic photosensitizer caused by the unique molecular configuration. These structural properties of organic photosensitizers contribute to an improvement in broad-band photosensing systems with new optoelectronic properties and functionalities.
RESUMEN
The ex-solution process, in which metal nanoparticles are grown on a host oxide, can be used to synthesize nanocatalysts with excellent thermal and chemical durability via spontaneous heterogeneous nucleation. However, this technique lacks a means to control the particle size and density because the amounts of ex-solved metal elements vary with the reduction conditions. Here, we devise a strategy to achieve small particle sizes and high particle densities concurrently by controlling the temperature (T), oxygen partial pressure (pO2) and ramping rate of the temperature. Quantitative analyses of Co particles ex-solved on Sr0.98Ti0.95Co0.05O3-δ thin films using ex situ SEM and in situ TEM reveal that the increasing T and decreasing the pO2 lead to smaller particle sizes with higher density levels and vice versa, contrary to common ex-solution examples. We find that nucleation thermodynamics dictates such counterintuitive behaviors of particle characteristics, which are attributed to our specific ex-solution conditions in which particle interactions are minimized and all the Co atoms are ex-solved under highly reducible conditions. We also demonstrated the feasibility of our strategy via CO oxidation with typical powder-based catalysts, suggesting that this method can be extended to various chemical/electrochemical applications.
RESUMEN
Infrared photodetectors are sought for diverse applications and their performance relies on photoactive materials and photocurrent generation mechanisms. Here, we fabricate IR photodetectors with heavily hydrogen-doped VO2 (i.e., HVO2) single-crystalline nanoparticles which show two orders greater resistivities than pure VO2. The I-V plots obtained under IR light irradiation are expressed by space charge limited current mechanism and the increase in photocurrent occurs due to the increase in the number of photoinduced trap sites. This phenomenon remarkably improves the key parameters at λ = 780 nm of high responsivity of 35280 A/W, high detectivity of 1.12 × 1013 Jones, and strikingly fast response times of 0.6-2.5 ns, that is, 3 orders of magnitude faster than the best records of two-dimensional structures and heterostructures. Density functional theory calculations illustrate that the generation of photoinduced trap sites is attributed to the movement of hydrogen atoms to less stable interstitial sites in VO2 under light exposure.
RESUMEN
Organic semiconductors (OSCs) are highly susceptible to the formation of metastable polymorphs that are often transformed by external stimuli. However, thermally reversible transformations in OSCs with stability have not been achieved due to weak van der Waals forces, and poor phase homogeneity and crystallinity. Here, a polymorph of a single crystalline 2,7-dioctyl[1] benzothieno[3,2-b][1]benzothio-phene rod on a low molecular weight poly(methyl methacrylate) (≈120k) that limits crystal coarsening during solvent vapor annealing is fabricated. Molecules in the polymorph lie down slightly toward the substrate compared to the equilibrium state, inducing an order of greater resistivity. During thermal cycling, the polymorph exhibits a reversible change in resistivity by 5.5 orders with hysteresis; this transition is stable toward bias and thermal cycling. Remarkably, varying cycling temperatures leads to diverse resistivities near room temperature, important for nonvolatile multivalue memories. These trends persist in the carrier mobility and on/off ratio of the polymorph field-effect transistor. A combination of in situ grazing incident wide angle X-ray scattering analyses, visualization for electronic and structural analysis simulations, and density functional theory calculations reveals that molecular tilt governs the charge transport characteristics; the polymorph transforms as molecules tilt, and thereby, only a homogeneous single-crystalline phase appears at each temperature.
RESUMEN
Plasmonic metal nanostructures with nanogaps have attracted great interest owing to their controllable optical properties and intense electromagnetic fields that can be useful for a variety of applications, but precise and reliable control of nanogaps in three-dimensional nanostructures remains a great challenge. Here, we report the control of nanojunctions of hollow porous gold nanoshell (HPAuNS) structures by a facile oxygen plasma-etching process and the influence of changes in nanocrevices of the interparticle junction on the optical and sensing characteristics of HPAuNSs. We demonstrate a high tunability of the localized surface plasmon resonance (LSPR) peaks and surface-enhanced Raman scattering (SERS) detection of rhodamine 6G (R6G) using HPAuNS structures with different nanojunctions by varying the degree of gold sintering. As the neck region of the nanojunction is further sintered, the main LSPR peak shifts from 785 to 1350 nm with broadening because the charge transfer plasmon mode becomes more dominant than the dipolar plasmon mode, resulting from the increase of conductance at the interparticle junctions. In addition, it is demonstrated that an increase in the sharpness of the nanojunction neck can enhance the SERS enhancement factor of the HPAuNS by up to 4.8-fold. This enhancement can be ascribed to the more intense local electromagnetic fields at the sharper nanocrevices of interparticle junctions. The delicate change of nanojunction structures in HPAuNSs can significantly affect their optical spectrum and electromagnetic field intensity, which are critical for their practical use in a SERS-based analytical sensor as well as multiple-wavelength compatible applications.
RESUMEN
Nonequilibrium deposition is a remarkable method for the in situ growth of unique nanostructures and phases for the functionalization of thin films. We introduce a distinctive structure of a mixed-phase, composed of BiVO4 and ß-Bi2O3, for photoelectrochemical water splitting. The mixed-phase is fabricated via nonequilibrium deposition by adjusted oxygen partial pressure. According to density functional theory calculations, we find that vanadium exsolution can be facilitated by introducing oxygen vacancies, enabling the fabrication of a nanostructured mixed-phase. These unique structures enhance charge migration by increasing the interfacial area and properly aligning the band offset between two crystalline phases. Consequently, the photocurrent density of the nanostructured mixed-phase thin films is about twice that of pristine BiVO4 thin films at 1.23 VRHE. Our work suggests that nonequilibrium deposition provides an innovative route for the structural engineering of photoelectrodes for the understanding of fundamental properties and improving the photocatalytic performance for solar water splitting.
RESUMEN
Precise control over the size and morphology of the Au spiky nanoparticle (SNP) is essential to obtain narrow and tunable surface plasmon resonance (SPR). However, these challenges require a fundamental understanding of the particle growth mechanism and kinetics as well as its morphological transition, which can only be achieved by real-time observation at nanometer resolution. Here, we report in situ liquid cell transmission electron microscopy studies of single and multiple Au SNP growth at various conditions of such parameters as size and dose rate of electron beam and HAuCl4 solution concentration. The particle evolves via a mixture of reaction and Au formation-limited growth, followed by Au formation-limited growth-a transition from faceted to roughened surfaces, confirmed by the analysis with different beam sizes and the UV-vis spectra that feature a unique trend of short- and long-wavelength plasmon band shift. Quantitative analyses combined with a theoretical model determine the transition time (tc) of the two regimes and estimate the surface concentration (ci) of the particle with time. Interestingly, tc can be manipulated by the particle density, which alters the surface roughening rate, and the density is modulated by tuning the aforementioned parameters based on DLVO theory. These results suggest a new method for synthesizing a Au SNP whose size, morphology, SPR, and density can be sensibly manipulated without adding reducing or capping agents.
RESUMEN
The dielectric reliability of low-k materials during mechanical deformation attracts tremendous attention, owing to the increasing demand for thin electronics to meet the ever-shrinking form factor of consumer products. However, the strong coupling between dielectric/electric and mechanical properties limits the use of low-k dielectrics in industrial applications. We report the leakage current and dielectric properties of a nanolattice capacitor during compressive stress cycling. Electrical breakdown measurements during the stress cycling, combined with a theoretical model and in situ mechanical experiments, provide insights to key breakdown mechanisms. Electrical breakdown occurs at nearly 50% strain, featuring a switch-like binary character, correlated with a transition from beam bending and buckling to collapse. Breakdown strength appears to recover after each cycle, concomitant with nanolattice's shape recovery. The compressive displacement at breakdown decreases with cycling due to permanently buckled beams, transforming the conduction mechanism from Schottky to Poole-Frankel emission. Remarkably, our capacitor with 99% porosity, k â¼ 1.09, is operative up to 200 V, whereas devices with 17% porous alumina films breakdown upon biasing based on a percolation model. Similarly with electrical breakdown, the dielectric constant of the capacitor is recoverable with five strain cycles and is stable under 25% compression. These outstanding capabilities of the nanolattice are essential for revolutionizing future flexible electronics.