Development and Verification of a 480 nm Blue Light Enhanced/Reduced Human-Centric LED for Light-Induced Melatonin Concentration Control.

With the inherent sleep and wake cycle regulated by natural sunlight, the human body has evolved over millennia to be active during the day and to rest at night. However, maintaining an optimal 24 h cycle has become increasingly problematic in modern society as more people spend the majority of the day indoors. Many research groups have reported that inadequate artificial lighting interferes with melatonin production and disrupts the circadian rhythm. This study considered biological functions for light-emitting diodes (LEDs) of next-generation illumination, and LED packages and spectra suitable for both daytime and nighttime applications were designed. The prepared daytime human-centric (HC)-LEDs had a melanopic/photopic (M/P) ratio that was up to 26% higher than that of conventional (c)-LEDs, whereas the nighttime HC-LEDs exhibited up to a 26% lower M/P ratio compared to the c-LEDs. Nevertheless, because the HC-LED is designed to have almost the same color coordinates as the c-LED having the same correlated-color temperature (CCT), there is no change in the perceived color. To substantiate the biological effect, melatonin level data were obtained from 22 voluntary participants in c- and HC-LED lighting environments. In the HC-LED lighting environment, melatonin was suppressed by 21.9% after waking, and nocturnal melatonin secretion was increased by up to 12.2%. As human-centric lighting, our HC-LEDs are expected to become an essential element for modern life, where people spend most of their time indoors.

Reduced graphene oxide/carbon double-coated 3-D porous ZnO aggregates as high-performance Li-ion anode materials.

The reduced graphene oxide (RGO)/carbon double-coated 3-D porous ZnO aggregates (RGO/C/ZnO) have been successfully synthesized as anode materials for Li-ion batteries with excellent cyclability and rate capability. The mesoporous ZnO aggregates prepared by a simple solvothermal method are sequentially modified through distinct carbon-based double coating. These novel architectures take unique advantages of mesopores acting as space to accommodate volume expansion during cycling, while the conformal carbon layer on each nanoparticle buffering volume changes, and conductive RGO sheets connect the aggregates to each other. Consequently, the RGO/C/ZnO exhibits superior electrochemical performance, including remarkably prolonged cycle life and excellent rate capability. Such improved performance of RGO/C/ZnO may be attributed to synergistic effects of both the 3-D porous nanostructures and RGO/C double coating.

Improving scattering layer through mixture of nanoporous spheres and nanoparticles in ZnO-based dye-sensitized solar cells.

A scattering layer is utilized by mixing nanoporous spheres and nanoparticles in ZnO-based dye-sensitized solar cells. Hundred-nanometer-sized ZnO spheres consisting of approximately 35-nm-sized nanoparticles provide not only effective light scattering but also a large surface area. Furthermore, ZnO nanoparticles are added to the scattering layer to facilitate charge transport and increase the surface area as filling up large voids. The mixed scattering layer of nanoparticles and nanoporous spheres on top of the nanoparticle-based electrode (bilayer geometry) improves solar cell efficiency by enhancing both the short-circuit current (J sc) and fill factor (FF), compared to the layer consisting of only nanoparticles or nanoporous spheres.