RESUMEN
The implementation of photoelectrochemical water purification technology can address prevailing environmental challenges that impede the advancement and prosperity of human society. In this study, Cu, which is abundant on Earth, was fabricated using an electrochemical deposition process, in which the preferential orientation direction and carrier concentration of the Cu-based oxide semiconductor were artificially adjusted by carefully controlling the OH- and applied voltage. In particular, Cu2O grown with a sufficient supply of OH- ions exhibited the (111) preferred orientation, and the (200) surface facet was exposed, independently achieving 90% decomposition efficiency in a methyl orange (MO) solution for 100 min. This specialized method minimizes the recombination loss of electron-hole pairs by increasing the charge separation and transport efficiency of the bulk and surface of the Cu2O multifunctional absorption layer. These discoveries and comprehension not only offer valuable perspectives on mitigating self-photocorrosion in Cu2O absorbing layers but also provide a convenient and expeditious method for the mass production of water purification systems that harness unlimited solar energy. These properties enable significant energy saving and promote high-speed independent removal of organic pollutants (i.e., MO reduction) during the water purification process.
RESUMEN
Multifunctional photodetectors (PDs) with broadband responsivity (R) and specific detectivity (D*) at low light intensities are gaining significant attention. Thus, we report a bilayer PD creatively fabricated by layering two-dimensional (2D) Sb2Se3 nanoflakes (NFs) on one-dimensional (1D) ZnO nanorods (NRs) using simple thermal transfer and hydrothermal processes. The unique coupling of these two layers of materials in a nanostructured form, such as 2D-Sb2Se3 NFs/1D-ZnO NRs, provides an effective large surface area, robust charge transport paths, and light-trapping effects that enhance light harvesting. Furthermore, the combination of both layers can effectively facilitate photoactivity owing to proper band alignment. The as-fabricated device demonstrated superior overall performance in terms of a suitable bandwidth, good R, and high D* under low-intensity light, unlike the single-layered 1D-ZnO NRs and 2D-Sb2Se3 NF structures alone, which had poor detectivity or response in the measured spectral range. The PD demonstrated a spectral photoresponse ranging from ultraviolet (UV) to visible (220-628 nm) light at intensities as low as 0.15 mW·cm-2. The PD yielded a D* value of 3.15 × 1013 Jones (220 nm), which reached up to 5.95 × 1013 Jones in the visible light region (628 nm) at a 3 V bias. This study demonstrated that the 2D-Sb2Se3 NFs/1D-ZnO NRs PD has excellent potential for low-intensity light detection with a broad bandwidth, which is useful for signal communications and optoelectronic systems.
RESUMEN
Cell culture-based screening of a chemical library identified diphenoxylate as an antiviral agent against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The observed 50% effective concentrations ranged between 1.4 and 4.9 µM against the original wild-type strain and its variants. Time-of-addition experiments indicated that diphenoxylate is an entry blocker targeting a host factor involved in viral infection. Fluorescence microscopic analysis visualized that diphenoxylate prevented SARS-CoV-2 particles from penetrating the cell membrane and also impaired endo-lysosomal acidification. Diphenoxylate exhibited a synergistic inhibitory effect on SARS-CoV-2 infection in human lung epithelial Calu-3 cells when combined with a transmembrane serine protease 2 (TMPRSS2) inhibitor, nafamostat. This synergy suggested that efficient antiviral activity is achieved by blocking both TMPRSS2-mediated early and endosome-mediated late SARS-CoV-2 entry pathways. The antiviral efficacy of diphenoxylate against SARS-CoV-2 was reproducible in a human tonsil organoids system. In a transgenic mouse model expressing the obligate SARS-CoV-2 receptor, human angiotensin-converting enzyme 2, intranasal administration of diphenoxylate (10 mg/kg/day) significantly reduced the viral RNA copy number in the lungs by 70% on day 3. This study underscores that diphenoxylate represents a promising core scaffold, warranting further exploration for chemical modifications aimed at developing a new class of clinically effective antiviral drugs against SARS-CoV-2.
RESUMEN
While photoelectrochemical (PEC) cells show promise for solar-driven green hydrogen production, exploration of various light-absorbing multilayer coatings has yet to significantly enhance their hydrogen generation efficiency. Acidic conditions can enhance the hydrogen evolution reaction (HER) kinetics and reduce overpotential losses. However, prolonged acidic exposure deactivates noble metal electrocatalysts, hindering their long-term stability. Progress requires addressing catalyst degradation to enable stable, efficient, and acidic PEC cells. Here, we proposed a process design based on the photoilluminated redox deposition (PRoD) approach. We use this to grow crystalline Rh2P nanoparticles (NPs) with a size of 5-10 on 30 nm-thick TiO2, without annealing. Atomically precise reaction control was performed by using several cyclic voltammetry cycles coincident with light irradiation to create a system with optimal catalytic activity. The optimized photocathode, composed of Rh2P/TiO2/Al-ZnO/Cu2O/Sb-Cu2O/ITO, achieved an excellent photocurrent density of 8.2 mA cm-2 at 0 VRHE and a durable water-splitting reaction in a strong acidic solution. Specifically, the Rh2P-loaded photocathode exhibited a 5.3-fold enhancement in mass activity compared to that utilizing just a Rh catalyst. Furthermore, in situ scanning transmission electron microscopy (STEM) was performed to observe the real-time growth process of Rh2P NPs in a liquid cell.
RESUMEN
The public and society have increasingly recognized numerous grave environmental issues, including water pollution, attributed to the rapid expansion of industrialization and agriculture. Renewable energy-driven catalytic advanced oxidation processes (AOPs) represent a green, sustainable, and environmentally friendly approach to meet the demands of environmental remediation. In this context, 2D transition metal dichalcogenides (TMDCs) piezoelectric materials, with their non-centrosymmetric crystal structure, exhibit unique features. They create dipole polarization, inducing a built-in electric field that generates polarized holes and electrons and triggers redox reactions, thereby facilitating the generation of reactive oxygen species for wastewater pollutant remediation. A broad spectrum of 2D TMDCs piezoelectric materials have been explored in self-integrated Fenton-like processes and persulfate activation processes. These materials offer a more simplistic and practical method than traditional approaches. Consequently, this review highlights recent advancements in 2D TMDCs piezoelectric catalysts and their roles in wastewater pollutant remediation through piezocatalytic-driven AOPs, such as Fenton-like processes and sulfate radicals-based oxidation processes.
Asunto(s)
Contaminantes Ambientales , Contaminantes Químicos del Agua , Aguas Residuales , Contaminantes Químicos del Agua/química , Metales , Oxidación-ReducciónRESUMEN
Correction for 'Quantitative assessment of cardiomyocyte mechanobiology through high-throughput cantilever-based functional well plate systems' by Jongyun Kim et al., Analyst, 2023, 148, 5133-5143, https://doi.org/10.1039/D3AN01286G.
RESUMEN
Despite the increasing number of stents implanted each year worldwide, patients remain at high risk for developing in-stent restenosis. Various self-reporting stents have been developed to address this challenge, but their practical utility has been limited by low sensitivity and limited data collection. Herein, we propose a next-generation self-reporting stent that can monitor blood pressure and blood flow inside the blood arteries. This proposed self-reporting stent utilizes a larger inductor coil encapsulated on the entire surface of the stent strut, resulting in a 2-fold increase in the sensing resolution and coupling distance between the sensor and external antenna. The dual-pressure sensors enable the detection of blood flow in situ. The feasibility of the proposed self-reporting stent is successfully demonstrated through in vivo analysis in rats, verifying its biocompatibility and multifunctional utilities. This multifunctional self-reporting stent has the potential to greatly improve cardiovascular care by providing real-time monitoring and unprecedented insight into the functional dynamics of the heart.
Asunto(s)
Reestenosis Coronaria , Humanos , Animales , Ratas , Reestenosis Coronaria/diagnóstico , Reestenosis Coronaria/etiología , Stents/efectos adversosRESUMEN
Retraction of 'Progressive p-channel vertical transistors fabricated using electrodeposited copper oxide designed with grain boundary tunability' by Sung Hyeon Jung et al., Mater. Horiz., 2022, 9, 1010-1022, https://doi.org/10.1039/D1MH01568K.
RESUMEN
Proper regulation of the in vitro cell culture environment is essential for disease modelling and drug toxicity screening. The main limitation of well plates used for cell culture is that they cannot accurately maintain energy sources and compounds needed during cell growth. Herein, to understand the importance of perfusion in cardiomyocyte culture, changes in contractile force and heart rate during cardiomyocyte growth are systematically investigated, and the results are compared with those of a perfusion-free system. The proposed perfusion system consists of a Peltier refrigerator, a peristaltic pump, and a functional well plate. A functional well plate with 12 wells is made through injection moulding, with two tubes integrated in the cover for each well to continuously circulate the culture medium. The contractile force of cardiomyocytes growing on the cantilever surface is analysed through changes in cantilever displacement. The maturation of cardiomyocytes is evaluated through fluorescence staining and western blot; cardiomyocytes cultured in the perfusion system show greater maturity than those cultured in a manually replaced culture medium. The pH of the culture medium manually replaced at intervals of 3 days decreases to 6.8, resulting in an abnormal heartbeat, while cardiomyocytes cultured in the perfusion system maintained at pH 7.4 show improved contractility and a uniform heart rate. Two well-known ion channel blockers, verapamil and quinidine, are used to measure changes in the contractile force of cardiomyocytes from the two systems. Cardiomyocytes in the perfusion system show greater stability during drug toxicity screening, proving that the perfusion system provides a better environment for cell growth.
Asunto(s)
Efectos Colaterales y Reacciones Adversas Relacionados con Medicamentos , Miocitos Cardíacos , Humanos , Efectos Colaterales y Reacciones Adversas Relacionados con Medicamentos/metabolismo , Técnicas de Cultivo de Célula , Verapamilo/farmacología , Evaluación Preclínica de Medicamentos , Células CultivadasRESUMEN
Fluorescent dyes have garnered significant attention as theranostic platforms owing to their inherent characteristics. In this study, we present the discovery of Medical Fluorophore 33 (MF33), a novel and potent theranostic agent with a phenaleno-isoquinolinium salt structure that can serve as a cancer therapeutic strategy. The synthesis of MF33 is readily achievable through a simple Rh(III)-catalyzed reaction. Moreover, MF33 displayed strong fluorescence signals, excellent microsomal stability, and high biocompatibility in vivo. It induces significant apoptosis in cancer cells via the p53/p21/caspase-3 signaling pathway, leading to selective cytotoxicity in various cancer cells. In vivo fluorescence imaging with MF33 enabled the visualization of sentinel lymph nodes in living mice. Notably, repeated intraperitoneal administration of MF33 resulted in antitumor activity in mice with colorectal cancer. Collectively, our findings suggest that phenaleno-isoquinolinium salt-based MF33 is a viable theranostic agent for biomedical imaging and cancer treatment.
Asunto(s)
Colorantes Fluorescentes , Neoplasias , Animales , Ratones , Colorantes Fluorescentes/química , Medicina de Precisión , Estudios de Factibilidad , Neoplasias/terapia , Nanomedicina Teranóstica/métodosRESUMEN
BACKGROUND: The incidence of tract seeding after the placement of indwelling pleural catheter (IPC) for malignant pleural effusion drainage has been variable in the literature. RESEARCH QUESTION: To evaluate the incidence of IPC-related cancer tract seeding and find out related demographic, clinical or imaging factors to the tract seeding. STUDY DESIGN AND METHODS: This retrospective study included 124 consecutive patients seen between January 2011 and December 2021 who underwent IPC placement for malignant pleural effusion drainage. Chest radiographs before IPC placement and serial chest CT studies were obtained. One patient was diagnosed pathologically, and the other patients were diagnosed as tract seeding radiologically. The incidence of and related factors to tract seeding were assessed by reviewing medical records and imaging studies. RESULTS: The incidence of IPC tract seeding was 21.7% (27 of 124 malignant effusions). Of 27 patients, 15 had primary lung cancer and remaining 12 had extra-thoracic malignancy. Adenocarcinoma (19 of 27, 70.3%) either from the lung (N = 12) or extra-thoracic malignancy (N = 7) was the most common cell type. Mean time elapsed until tract seeding occurrence after IPC placement was 96 days (ranges; 28-306 days). The survival in seeding group after IPC placement was 185 days (ranges, 32-457 days). On odd ratio analysis, the presence of mediastinal pleural thickening (OR [95% CI]; 9.79 (2.67-35.84), p = 0.001) was significantly related to the occurrence of tract seeding. Neither tumor volume within pleural space (p = 0.168), duration of IPC indwelling (p = 0.142), days of survival after IPC placement (p = 0.26), nor pleural effusion amount (p = 0.481) was related to the tract seeding. INTERPRETATION: IPC tract seeding is seen in 27 (21.7%) of 124 malignant pleural effusion patients, particularly with adenocarcinoma cytology. CT features of mediastinal pleural thickening are related to the occurrence of tract seeding.
Asunto(s)
Adenocarcinoma , Enfermedades Pleurales , Derrame Pleural Maligno , Neoplasias Pleurales , Neoplasias Torácicas , Humanos , Derrame Pleural Maligno/diagnóstico por imagen , Derrame Pleural Maligno/epidemiología , Derrame Pleural Maligno/terapia , Estudios Retrospectivos , Incidencia , Resultado del Tratamiento , Catéteres de Permanencia/efectos adversos , Drenaje/métodos , Adenocarcinoma/complicacionesRESUMEN
Resistive random-access memory (RRAM) devices have significant advantages for neuromorphic computing but have fatal problems of uncontrollability and abrupt resistive switching behaviors degrading their synaptic performance. In this paper, we propose the electrochemical design of an active Cu2O layer containing a strategic sublayer of ultrafine Cu nanoparticles (U-Cu NPs) to form uniformly dispersed conducting filaments, which can effectively improve the reliability for analog switching of RRAM-based neuromorphic computing. The electrochemical pulse deposited (EPD) U-Cu NPs are linked to the bottom electrode through a semi-conductive path within the bottom Cu2O layer, since the EPD is preferentially carried out on the conductive sites. All Cu2O films with U-Cu NPs are developed in situ in the single electrolyte bath without any pause. The proposed U-Cu NPs can concentrate the external electric field and can generate conductive filament paths for analog resistive switching. The applied electric field was uniformly spread to U-Cu NPs at the center of the active layer and displays resistive switching behavior via multiple conductive filaments. This shows a strong harmony between the resistance-switching characteristics and the analog operation of the active layer. This RRAM device shows outstanding gradual analog switching, great linearity, dynamic range, endurance, precision, speed, and retention characteristics simultaneously and adequately for neuromorphic computing by realizing multiple weak filament-type operation.
RESUMEN
Applications of abundant seawater in electrochemical energy conversion are constrained due to the sluggish oxygen evolution reaction and the corrosive chlorine oxidation reaction. Hence, it is imperative to develop an efficient anodic reaction alternative suitable for coupling with the cathodic counterpart. Due to a low thermodynamic oxidation potential, hydrazine oxidation reaction (HzOR) offers a unique pathway to overcome these challenges. Herein, spontaneously in situ reduced atomic scale Pd surface-confined to electrochemically prepared layered Co(OH)2 on carbon cloth is synthesized. This study reveals the hydrazine and Pd-dependent morphological evolution of Co(OH)2 and its Pd hybrids into nanoparticulate form. Unlike various layered double hydroxides, Pd integrated Co(OH)2 benefits from the contribution of Co(OH)2 as an active HzOR catalyst and the reductive support to host Pd, resulting in synergistically improved performances. Mass activities of Pd in alkaline and alkaline saline electrolyte are 11.24 and 9.83 A mgPd -1 at 200 mV, respectively, corresponding to the highest HzOR activities among noble metals. The optimized Pd hybrid demonstrates ≈6.5 times the current density relative to PtC (14.91 mA cm-2 at 200 mV) in alkaline saline water with hydrazine. These findings would be beneficial to realize high overpotential anodic alternatives and reduce over-dependence on freshwater for electrocatalysis.
RESUMEN
OBJECTIVES: To compare the efficacy and safety of high-intensity focused ultrasound (HIFU) therapy with coblation for the treatment of inferior turbinate hypertrophy (ITH). METHODS: In this randomized controlled clinical trial, 20 patients underwent inferior turbinate surgery, which consisted of either HIFU or coblation therapy. Efficacy, safety, and tolerability were evaluated by subjective symptom scores, acoustic rhinometry, and nasal endoscopy. RESULTS: The modified nasal obstruction symptom evaluation (NOSE) score and nasal obstruction visual analog scale (NO-VAS) significantly decreased in both groups 12 weeks postoperatively. The between-group differences in the evaluation scores were not statistically significant. On nasal endoscopy, the HIFU patients showed improvements in mucosal swelling sooner than the patients undergoing coblation therapy. Nasal crusting significantly increased in the patients undergoing coblation compared to the patients undergoing HIFU therapy until postoperative week 4. Mucosal preservation was superior in the HIFU patients. Although HIFU was less painful than coblation therapy during the procedure, the difference was not significant (4.9 vs. 6.3, P=0.143). The difference in global satisfaction between the two groups was not statistically significant, although satisfaction was slightly higher among the HIFU patients than among the coblation patients (4.6 vs. 4.1, P=0.393). CONCLUSION: HIFU provided results similar to those of coblation therapy for patients with nasal obstruction due to ITH, but HIFU therapy caused less discomfort during the procedure. HIFU therapy appears to be a good noninvasive alternative to the current surgical modalities for ITH.
RESUMEN
In this study, we used a simple and low-toxicity chemical treatment to make a carboxylate-functionalized dragon fruit peel powder (CF-DFPP) from dragon fruit peel to improve its capacity for adsorbing Rhodamine B (RhB) from an aqueous medium. Field Emission-Scanning Electron Microscopy/Energy-Dispersive X-ray (FE-SEM/EDX), point of zero charges (pHPZC), Brunauer-Emmett-Teller (BET), and Fourier Transform Infrared (FT-IR) analyses were performed to characterize the adsorbent materials. The adsorption performance and mechanism for the removal of RhB were examined. The kinetic, isotherm and thermodynamic parameters were employed to evaluate the adsorption mechanism. Compared to other models, the Langmuir isotherm and PSO kinetic models better defined the experimental data. CF-DFPP adsorbent exhibited a maximum adsorption efficiency of 228.7 mg/g at 298 K for RhB adsorption. Thermodynamic analysis revealed that the adsorption of RhB by CF-DFPP was spontaneous (ΔGo < 0) and exothermic (ΔHo < 0) nature of the process. Different eluting agents were used in desorption tests, and NaOH was revealed to have greater desorption efficiency (96.8%). Furthermore, regeneration examinations revealed that the biosorbent could effectively retain RhB, even after six adsorption/desorption cycles. These findings demonstrated that the CF-DFPP might be a novel material for removing RhB from an aqueous medium.
Asunto(s)
Frutas , Contaminantes Químicos del Agua , Polvos/análisis , Frutas/química , Adsorción , Espectroscopía Infrarroja por Transformada de Fourier , Biodegradación Ambiental , Termodinámica , Cinética , Contaminantes Químicos del Agua/química , Concentración de Iones de HidrógenoRESUMEN
To date, several smart stents have been proposed to continuously detect biological cues, which is essential for tracking patients' critical vital signs and therapy. However, the proposed smart stent fabrication techniques rely on conventional laser micro-cutting or 3D printing technologies. The sensors are then integrated into the stent structure using an adhesive, conductive epoxy, or laser micro-welding process. The sensor packaging method using additional fabrication processes can cause electrical noise, and there is a possibility of sensor detachment from the sent structure after implantation, which may pose a significant risk to patients. Herein, we are demonstrating for the first time a single-step fabrication method to develop a smart stent with an integrated sensor for detecting in-stent restenosis and assessing the functional dynamics of the heart. The smart stent is fabricated using a microelectromechanical system (MEMS)-based micromachining technology. The proposed smart stent can detect biological cues without additional power and wirelessly transmit the signal to the network analyzer. The cytocompatibility of the smart stent is confirmed through a cytotoxicity test by monitoring the cell growth, proliferation, and viability of the cultured cardiomyocytes. The capacitance of the smart stent exhibits an excellent linear relationship with the applied pressure. The exceptional sensitivity of the pressure sensor enabled the proposed smart stent to detect biological cues during in vivo analysis. The preliminary findings confirmed the proposed smart stent's higher level of structural integrity, durability and repeatability. Finally, the practical feasibility of the smart stent is demonstrated by monitoring diastole and systole at various beat rates using a phantom. The results of the phantom study showed a similar pattern to the human model, indicating the potential use of the proposed multifunctional smart stent for real-time applications.
Asunto(s)
Reestenosis Coronaria , Sistemas Microelectromecánicos , Humanos , Reestenosis Coronaria/etiología , StentsRESUMEN
Biocatalysts, including live microbial cells/enzymes, have been considered a predominant and advantageous tool for effectively transforming biomass into biofuels and valued biochemicals. However, high production costs, separation, and reusability limit its practical application. Immobilization of single and multi-enzymes by employing different nano-supports have gained massive attention because of its elevated exterior domain and high enzymatic performance. Application of nanobiocatalyst can overcome the drawbacks mainly, stability and reusability, thus reflecting the importance of biomass-based biorefinery to make it profitable and sustainable. This review provides an in-depth, comprehensive analysis of nanobiocatalysts systems concerning nano supports and biocatalytic performance characteristics. Furthermore, the effects of nanobiocatalyst on waste biomass to biofuel and valued bioproducts in the biorefinery approach and their critical assessment are discussed. Lastly, this review elaborates commercialization and market outlooks of the bioconversion process using nanobiocatalyst, followed by different strategies to overcome the limitations and future research directions on nanobiocatalytic-based industrial bioprocesses.
Asunto(s)
Biocombustibles , Industrias , Biocatálisis , BiomasaRESUMEN
To utilize continuous ultralow intensity signals from oxide synaptic transistors as artificial synapses that mimic human visual perception, we propose strategic oxide channels that optimally utilize their advantageous functions by stacking two oxide semiconductors with different conductivities. The bottom amorphous indium-gallium-zinc oxide (a-IGZO) layer with a relatively low conductivity was designed for an extremely low initial postsynaptic current (PSCi) by achieving full depletion at a low negative gate voltage, and the stacked top amorphous indium-zinc oxide (a-IZO) layer improved the amplitude of the synaptic current and memory retention owing to the enhancement in the persistent photoconductivity characteristics. We demonstrated an excellent photonic synapse thin-film transistor (TFT) with a precise synaptic weight change even in the range of ultralow light intensity by adapting this stacking IGZO/IZO channel. The proposed device exhibited distinct ∆PSC values of 3.1 and 18.1 nA under ultralow ultraviolet light (350 nm, 50 ms) of 1.6 and 8.0 µW/cm2. In addition, while the lowest light input exhibited short-term plasticity characteristics similar to the "volatile-like" behavior of the human brain with a current recovery close to the initial value, the increase in light intensity caused long-term plasticity characteristics, thus achieving synaptic memory transition in the IGZO/IZO TFTs.
RESUMEN
This study explored the potential of abundantly available sodium lignosulfonate (LS) as a reducer and fabricating agent in preparing silver nanoparticles (LS-Ag NPs). The operational conditions were optimized to make the synthesis process simpler, rapid, and eco-friendly. The prepared LS-Ag NPs were analyzed via UV-Vis spectroscopy, X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, and high-resolution transmission electron microscopy. Results demonstrated that LS-Ag NPs were of crystalline structure, capped with LS constituents, and spherical in shape with a size of approximately 20 nm. Under optimized conditions, LS-Ag NPs exhibited significant photocatalytic activity in Reactive Yellow 4G degradation. The effects of photocatalyst (LS-Ag NPs) dosage, dye concentration, and its reusability for dye degradation were studied to make the process practically applicable in textile wastewater treatment. Additionally, the synthesized LS-Ag NPs displayed significant free radical scavenging against 2-diphenyl-1-picrylhydrazyl (DPPH) with an IC50 value of (50.2 ± 0.70 µg/mL) and also exhibited antidiabetic activity in terms of inhibition in the activity of carbohydrate-degrading marker enzyme α-glucosidase with an IC50 value of (58.1 ± 0.65 µg/mL). LS-Ag NPs showed substantial antibacterial potential against pathogenic strains, namely E. coli and S. aureus. In conclusion, LS-Ag NPs can be a reliable and eco-friendly material for their possible application in the treatment of dye-containing wastewater and have a great perspective in the biomedical and pharmaceutical sectors.