Dielectric Constant in Nanoscale Bubbles on MoS2.

Nanoscale bubbles form inevitably during the transfer of two-dimensional (2D) materials on a target substrate due to their van der Waals interaction. Despite a large number of studies based on nanobubble structures with localized strain, the dielectric constant (κ) in nanobubbles of MoS2 is poorly understood. Here, we report κ measurements for nanobubbles on MoS2 by probing the polarization forces based on electrostatic force microscopy. Remarkably, higher κ values of 6-8 independent of the nanobubble size are observed for the nanobubbles as compared to flat regions with a κ of ≈3. We find that the charge carrier increase owing to the strain-induced bandgap reduction is responsible for the enhanced κ of the nanobubbles, where the measured κ is in good agreement with the calculations based on the Clausius-Mossotti relation. Our results provide fundamental information about the strain-induced local dielectric properties of 2D materials and a guide for the design and fabrication of high-performance optoelectrical devices based on 2D materials.

Importance of broken geometric symmetry of single-atom Pt sites for efficient electrocatalysis.

Platinum single-atom catalysts hold promise as a new frontier in heterogeneous electrocatalysis. However, the exact chemical nature of active Pt sites is highly elusive, arousing many hypotheses to compensate for the significant discrepancies between experiments and theories. Here, we identify the stabilization of low-coordinated PtII species on carbon-based Pt single-atom catalysts, which have rarely been found as reaction intermediates of homogeneous PtII catalysts but have often been proposed as catalytic sites for Pt single-atom catalysts from theory. Advanced online spectroscopic studies reveal multiple identities of PtII moieties on the single-atom catalysts beyond ideally four-coordinated PtII-N4. Notably, decreasing Pt content to 0.15 wt.% enables the differentiation of low-coordinated PtII species from the four-coordinated ones, demonstrating their critical role in the chlorine evolution reaction. This study may afford general guidelines for achieving a high electrocatalytic performance of carbon-based single-atom catalysts based on other d8 metal ions.

Unlocking Cu(I)-Mediated Catalytic Pathways for Efficient ROS Generation by Incorporating an Oxazole-Based Histidine Surrogate into Cu(II)-ATCUN Complexes.

The catalytic redox activity of Cu(II) bound to the amino-terminal copper and nickel (ATCUN) binding motif (Xxx-Zzz-His, XZH) is stimulating the development of catalytic metallodrugs based on reactive oxygen species (ROS)-mediated biomolecule oxidation. However, low Cu(I) availability resulting from the strong Cu(II) binding affinity of the ATCUN motif is regarded as a limitation to efficient ROS generation. To address this, we replaced the imidazole moiety (pKa 7.0) of Gly-Gly-His-NH2 (GGHa, a canonical ATCUN peptide) with thiazole (pKa 2.7) and oxazole (pKa 0.8), yielding GGThia and GGOxa, respectively. A newly synthesized amino acid, Fmoc-3-(4-oxazolyl)-l-alanine, served as a histidine surrogate featuring an azole ring with the lowest pKa among known analogues. Despite similar square-planar Cu(II)-N4 geometries being observed for the three Cu(II)-ATCUN complexes by electron paramagnetic resonance spectroscopy and X-ray crystallography, the azole modification enabled the Cu(II)-ATCUN complexes to exhibit significant rate enhancement for ROS-mediated DNA cleavage. Further analyses based on Cu(I)/Cu(II) binding affinities, electrochemical measurements, density functional theory calculations, and X-ray absorption spectroscopy indicated that the azole modification enhanced the accessibility of the Cu(I) oxidation state during ROS generation. Our oxazole/thiazole-containing ATCUN motifs provide a new design strategy for peptide ligands with modulated N donor ability, with potential applications in the development of ROS-mediated metallodrugs.

Elucidation of Electrochemically Induced but Chemically Driven Pt Dissolution.

Securing the electrochemical durability of noble metal platinum is of central importance for the successful implementation of a proton exchange membrane fuel cell (PEMFC). Pt dissolution, a major cause of PEMFC degradation, is known to be a potential-dependent transient process, but its underlying mechanism is puzzling. Herein, we elucidate a chemical Pt dissolution process that can occur in various electrocatalytic conditions. This process intensively occurs during potential perturbations with a millisecond timescale, which has yet to be seriously considered. The open circuit potential profiles identify the dominant formation of metastable Pt species at such short timescales and their simultaneous dissolution. Considering on these findings, a proof-of-concept strategy for alleviating chemical Pt dissolution is further studied by tuning electric double layer charging. These results suggest that stable Pt electrocatalysis can be achieved if rational synthetic or systematic strategies are further developed.

Nondestructive and local mapping photoresponse of WSe2 by electrostatic force microscopy.

We report a local mapping photoresponse of WSe2 using a second-harmonic (2w) channel based on nondestructive electrostatic force microscopy (EFM). The 2w signals resulting from interaction between WSe2 and EFM tip are intrinsically related to the electrical conductivity of WSe2. The photoresponse images and rise/decay time constants of WSe2 are obtained by local mapping 2w signals under illumination. We observe that the local photoresponse signals of WSe2 increase with the positive tip gate voltage while the WSe2 shows a p-type behavior in dark conditions We find that the reduced mobility of the photogenerated charge carriers resulting from the enhanced carrier scattering in the accumulation regime of WSe2 is responsible for the gate-dependent photoresponse behavior. Our results provide a deep understanding the intrinsic optoelectrical properties of WSe2 and contribute to the developments in the optoelectronic devices based on van der Waals layered materials.

Quantification of Active Site Density and Turnover Frequency: From Single-Atom Metal to Nanoparticle Electrocatalysts.

Single-atom catalysts (SACs) featuring atomically dispersed metal cations covalently embedded in a carbon matrix show significant potential to achieve high catalytic performance in various electrocatalytic reactions. Although considerable advances have been achieved in their syntheses and electrochemical applications, further development and fundamental understanding are limited by a lack of strategies that can allow the quantitative analyses of their intrinsic catalytic characteristics, that is, active site density (SD) and turnover frequency (TOF). Here we show an in situ SD quantification method using a cyanide anion as a probe molecule. The decrease in cyanide concentration triggered by irreversible adsorption on metal-based active sites of a model Fe-N-C catalyst is precisely measured by spectrophotometry, and it is correlated to the relative decrease in electrocatalytic activity in the model reaction of oxygen reduction reaction. The linear correlation verifies the surface-sensitive and metal-specific adsorption of cyanide on Fe-N x sites, based on which the values of SD and TOF can be determined. Notably, this analytical strategy shows versatile applicability to a series of transition/noble metal SACs and Pt nanoparticles in a broad pH range (1-13). The SD and TOF quantification can afford an improved understanding of the structure-activity relationship for a broad range of electrocatalysts, in particular, the SACs, for which no general electrochemical method to determine the intrinsic catalytic characteristics is available.

Selective electrochemical reduction of nitric oxide to hydroxylamine by atomically dispersed iron catalyst.

Electrocatalytic conversion of nitrogen oxides to value-added chemicals is a promising strategy for mitigating the human-caused unbalance of the global nitrogen-cycle, but controlling product selectivity remains a great challenge. Here we show iron-nitrogen-doped carbon as an efficient and durable electrocatalyst for selective nitric oxide reduction into hydroxylamine. Using in operando spectroscopic techniques, the catalytic site is identified as isolated ferrous moieties, at which the rate for hydroxylamine production increases in a super-Nernstian way upon pH decrease. Computational multiscale modelling attributes the origin of unconventional pH dependence to the redox active (non-innocent) property of NO. This makes the rate-limiting NO adsorbate state more sensitive to surface charge which varies with the pH-dependent overpotential. Guided by these fundamental insights, we achieve a Faradaic efficiency of 71% and an unprecedented production rate of 215 µmol cm-2 h-1 at a short-circuit mode in a flow-type fuel cell without significant catalytic deactivation over 50 h operation.

Identification of Single-Atom Ni Site Active toward Electrochemical CO2 Conversion to CO.

Electrocatalytic conversion of CO2 into value-added products offers a new paradigm for a sustainable carbon economy. For active CO2 electrolysis, the single-atom Ni catalyst has been proposed as promising from experiments, but an idealized Ni-N4 site shows an unfavorable energetics from theory, leading to many debates on the chemical nature responsible for high activity. To resolve this conundrum, here we investigated CO2 electrolysis of Ni sites with well-defined coordination, tetraphenylporphyrin (N4-TPP) and 21-oxatetraphenylporphyrin (N3O-TPP). Advanced spectroscopic and computational studies revealed that the broken ligand-field symmetry is the key for active CO2 electrolysis, which subordinates an increase in the Ni redox potential yielding NiI. Along with their importance in activity, ligand-field symmetry and strength are directly related to the stability of the Ni center. This suggests the next quest for an activity-stability map in the domain of ligand-field strength, toward a rational ligand-field engineering of single-atom Ni catalysts for efficient CO2 electrolysis.

Atomistic Insights into the Stability of Pt Single-Atom Electrocatalysts.

Single-atom catalysts (SACs) have quickly emerged as a new class of catalytic materials. When confronted with classical carbon-supported nanoparticulated catalysts (Pt/C), SACs are often claimed to have superior electrocatalytic properties, e.g., stability. In this study, we critically assess this statement by investigating S-doped carbon-supported Pt SACs as a representative example of noble-metal-based SACs. We use a set of complementary techniques, which includes online inductively coupled plasma mass spectrometry (online ICP-MS), identical location transmission electron microscopy (IL-TEM), and X-ray photoelectron spectroscopy (XPS). It is shown by online ICP-MS that the dissolution behavior of as-synthesized Pt SACs is significantly different from that of metallic Pt/C. Moreover, Pt SACs are, indeed, confirmed to be more stable toward Pt dissolution. When cycled to potentials of up to 1.5 VRHE, however, the dissolution profiles of Pt SACs and Pt/C become similar. IL-TEM and XPS show that this transition is due to morphological and chemical changes caused by cycling. The latter, in turn, is a consequence of the relatively poor stability of S ligands. As monitored by online ICP-MS and XPS, significant amounts of sulfur leave the catalyst during oxidation. Hence, in case catalysts with improved stability in the anodic potential region are desired, more robust supports and ligands must be developed.

Validation of analytical methods for heterocyclic amines in seven food matrices using high-performance liquid chromatography-tandem mass spectrometry.

Heterocyclic amines (HCAs) are potent mutagens generated by the high temperatures of the cooking process. The purpose of this study was to develop and validate analytical methods for HCAs determination using high-performance liquid chromatography-tandem mass spectrometry in seven food matrices: corn oil, milk, 20% ethanol, pork, flat fish, sea mustard (Undaria pinnatifida), and radish. Six isotopically labelled internal standards were used for quantitation, and Chem Elut and Oasis hydrphilic-liphophilic balance cartridges were applied for sample preparation to remove interferences. Calibration curves showed good linearity (R2 > 0.99) in all matrices. The ranges of the method detection limit and method quantitation limit were 0.009-2.35 ng g-1 and 0.025-7.13 ng g-1, respectively. The recoveries ranged from 67.5% to 119.6%. The coefficients of variation ranged from 0.3% to 15.1% for intra-day and ranged from 0.8% to 19.1% for inter-day. The methods were applied to 24 total diet study samples for HCAs quantitation. These results indicate that the established methods are reliable for determining HCAs in various foods.

Theoretical and Experimental Understanding of Hydrogen Evolution Reaction Kinetics in Alkaline Electrolytes with Pt-Based Core-Shell Nanocrystals.

The free energy of H adsorption (ΔGH) on a metallic catalyst has been taken as a descriptor to predict the hydrogen evolution reaction (HER) kinetics but has not been well applied in alkaline media. To assess this, we prepare Pd@Pt and PdH@Pt core-shell octahedra enclosed by Pt(111) facets as model catalysts for controlling the ΔGH affected by the ligand, the strain, and their ensemble effects. The Pt shell thickness is adjusted from 1 to 5 atomic layers by varying the amount of Pt precursor added during synthesis. In an alkaline electrolyte, the HER activity of core-shell models is improved either by the construction of core-shell structures or by the increased number of Pt shells. These experimental results are in good agreement with the ΔGH values calculated by the first-principles density functional theory with a complex surface strained core-shell slab model. However, enhanced HER activities of Pd@Pt and PdH@Pt core-shell nanocrystals over the Pt catalyst are inconsistent with the thermodynamic ΔGH scaling relationship only but can be explained by the work function and apparent ΔGH models that predict the interfacial electric field for the HER.

Carbon Monoxide as a Promoter of Atomically Dispersed Platinum Catalyst in Electrochemical Hydrogen Evolution Reaction.

Carbon monoxide is widely known to poison Pt during heterogeneous catalysis owing to its strong donor-acceptor binding ability. Herein, we report a counterintuitive phenomenon of this general paradigm when the size of Pt decreases to an atomic level, namely, the CO-promoting Pt electrocatalysis toward hydrogen evolution reactions (HER). Compared to pristine atomic Pt catalyst, reduction current on a CO-modified catalyst increases significantly. Operando mass spectroscopy and electrochemical analyses demonstrate that the increased current arises due to enhanced H2 evolution, not additional CO reduction. Through structural identification of catalytic sites and computational analysis, we conclude that CO-ligation on the atomic Pt facilitates Hads formation via water dissociation. This counterintuitive effect exemplifies the fully distinct characteristics of atomic Pt catalysts from those of bulk Pt, and offers new insights for tuning the activity of similar classes of catalysts.

The Optimal Energy Level of Virtual Monochromatic Images From Spectral CT for Reducing Beam-Hardening Artifacts Due to Contrast Media in the Thorax.

OBJECTIVE: The purpose of this study is to determine the optimal energy level of virtual monochromatic images from spectral CT compared with conventional polychromatic images for reducing beam-hardening artifacts caused by contrast media in the thorax. MATERIALS AND METHODS: A total of 101 consecutive patients who underwent chest CT with contrast enhancement were retrospectively included in this study. The same contrast media and injection protocols were applied to the whole study population. Virtual monochromatic image datasets ranging from 70 to 200 keV and conventional polychromatic images were obtained. Readers' subjective image quality scores were recorded for conventional polychromatic and virtual monochromatic images obtained at 70, 100, 130, and 200 keV. Image noise, CT attenuation difference, contrast-to-noise ratio (CNR), and signal-to-noise ratio (SNR) were also obtained in each algorithm. Comparisons of parameters between algorithms were performed. RESULTS: The best subjective image quality score and significantly lower image noise were observed for 130-keV virtual monochromatic images compared with conventional polychromatic images (all p < 0.001). Also, CT attenuation differences were significantly lower for both 100- and 130-keV virtual monochromatic images than for conventional polychromatic images (all p < 0.001). Meanwhile, the lowest differences in CT attenuation were observed for 100-keV virtual monochromatic images compared with conventional polychromatic images. However, there were no significant differences in CT attenuation between 100- and 130-keV virtual monochromatic images. SNR was similar between 130-keV virtual monochromatic images and conventional polychromatic images, although both SNR and CNR decreased as the energy level increased. CONCLUSION: Virtual monochromatic imaging reduced beam-hardening artifacts and improved image quality, and optimal evaluation of chest CT was best achieved at 100 and 130 keV.

Determination of Heterocyclic Amines and Acrylamide in Agricultural Products with Liquid Chromatography-Tandem Mass Spectrometry.

Heterocyclic amines (HCAs) and acrylamide are unintended hazardous substances generated by heating or processing of foods and are known as carcinogenic and mutagenic agents by the animal experiments. A simple method was established for a rapid and accurate determination of 12 types of HCAs (IQ, MeIQ, Glu-P-1, Glu-P-2, MeIQx, Trp-P-1, Trp-P-2, PhIP, AαC, MeAαC, Harman and Norharman) and acrylamide in three food matrices (non-fat liquid, non-fat solid and fat solid) by isotope dilution liquid chromatography-tandem mass spectrometry (LC-MS/MS). In every sample, a mixture of internal standards including IQ-d3, MeIQx-d3, PhIP-d3, Trp-P-2-(13)C2-(15)N and MeAαC-d3 was spiked for quantification of HCAs and (13)C3-acrylamide was also spiked for the analysis of acrylamide. HCAs and acrylamide in sample were extracted with acetonitrile and water, respectively, and then two solid-phase extraction cartridges, ChemElut: HLB for HCAs and Accucat: HLB for acrylamide, were used for efficiently removing interferences such as pigment, lipid, polar, nonpolar and ionic compounds. Established method was validated in terms of recovery, accuracy, precision, limit of detection, limit of quantitation, and linearity. This method showed good precision (RSD < 20%), accuracy (71.8~119.1%) and recovery (66.0~118.9%). The detection limits were < 3.1 ng/g for all analytes. The correlation coefficients for all the HCAs and acrylamide were > 0.995, showing excellent linearity. These methods for the detection of HCAs and acrylamide by LC-MS/MS were applied to real samples and were successfully used for quantitative monitoring in the total diet study and this can be applied to risk assessment in various food matrices.