RESUMEN
Wavelength-tunable spiral-phase-contrast (SPC) imaging was experimentally accomplished in the visible wavelengths spanning a broad bandwidth of â¼200 nm based on a single off-axis spiral phase mirror (OSPM). By the rotation of an OSPM, which was designed with an integer orbital angular momentum (OAM) of l = 1 at a wavelength of 561 nm and incidence angle of 45°, high-quality SPC imaging was obtained at different wavelengths. For the comparison with wavelength-tunable SPC imaging using an OSPM, SPC imaging using a spiral phase plate (manufactured to generate an OAM of l = 1 at 561 nm) was performed at three wavelengths (473, 561, and 660 nm), resulting in clear differences. Theoretically, based on field tracing simulations, high-quality wavelength-tunable SPC imaging could be demonstrated in a very broad bandwidth of â¼400 nm, which is beyond the bandwidth of â¼200 nm obtained experimentally. This technique contribute to developing high-performance wavelength-tunable SPC imaging by simply integrating an OSPM into the current optical imaging technologies.
RESUMEN
This publisher's note contains corrections to Opt. Lett.46, 4216 (2021)OPLEDP0146-959210.1364/OL.432413.
RESUMEN
Wavelength-tunable optical vortices with a topological charge equal to l=1 of orbital angular momentum (OAM) were experimentally realized using a single off-axis spiral phase mirror (OSPM) with lasers of various visible-light wavelengths. Using an OSPM designed for 561 nm and an incidence angle of 45°, circular doughnut-shaped l=1 optical vortices were obtained at 561, 473, and 660 nm by rotating the OSPM to modify the laser incidence angle. Wavelength-tunable l=1 optical vortices were obtained at the respective incidence angles of 45°, 53.4°, and 33.7°, because the effective geometrical thickness of the OSPM, which determines the order of OAM, was identical at each wavelength. This flexible OSPM which operates over a wide wavelength range will provide continuously wavelength-tunable optical vortices for applications in the fields of advanced optics and photonics in which optical vortices with wide wavelength tunability are in demand.
RESUMEN
The periodic structure on the optical surface affects the beam shape and its propagation. As the size of the optical elements becomes larger and its shape becomes complicated, the quantitative analysis of the effect of the periodic structure on the optical surface becomes indispensable given that it is very difficult to completely eliminate the microscopic periodic structures. Herein, we have experimentally investigated Bragg scattering from an optical surface with extremely small aspect ratios (~10-5) and groove densities (0.5 lines/mm). We observed the period of the constructive interference formed due to the propagation of the 0th, 1st, and -1st beam modes caused by Bragg scattering. When the periodic structure has a modulation depth of ± 50 nm, the intensity increase of constructive interference between the beam modes formed by Bragg scattering was > 10 times greater than the intensity of a flat surface at the propagation distance at which constructive interference was most pronounced. This study is envisaged to open new avenues for the quantification of the effect of periodic structures based on the observation of the interference on the beam profile formed by Bragg scattering during the beam propagation.
RESUMEN
A double layered plasmonic device based on transferring technique with polystyrene nano-beads is analyzed and demonstrated to increase the sensing characteristics of plasmonic sensor system. The double layered plasmonic devices are calculated using the three-dimensional finite-difference time-domain method for the width and thickness of the nano-hole structures. The double layered plasmonic devices with different diameters of the Au nano-hole are fabricated by transferring method with commercially available chloromethyl latex with a diameter of 0.42 µm. The optimum sensing characteristic of the proposed plasmonic device is obtained with the film and the hole thickness of 15 and 15 nm in the 246 nm wide nano-hole size. The best sensitivity of the proposed plasmonic sensor is 67.7 degree/RIU when the sensitivity of the conventional plasmonic sensor is 42.2 degree/RIU.
RESUMEN
In this study, a half-circled cavity based microdisk laser diode is proposed and demonstrated experimentally for an integrated photonic biochemical sensor. Conventional microdisk sensors have limitations in optical coupling and reproducibility. In order to overcome these drawbacks, we design a novel half-circled micro disk laser (HC-MDL) which is easy to manufacture and has optical output directionality. The Q-factor of the fabricated HC-MDL was measured as 7.72 × 106 using the self-heterodyne method and the side mode suppression ratio was measured as 23 dB. Moreover, gas sensing experiments were performed using the HC-MDL sensor. A wavelength shift response of 14.21 pm was obtained for 100 ppb dimethyl methylphosphonate (DMMP) gas and that of 14.70 pm was obtained for 1 ppm ethanol gas. These results indicate the possibility of highly sensitive gas detection at ppb levels using HC-MDL. This attractive feature of the HC-MDL sensor is believed to be very useful for a wide variety of optical biochemical sensor applications.
RESUMEN
Chirality of a resonance localized on an islands chain is studied in a deformed Reuleaux triangular-shaped microcavity, where clockwise and counter clockwise traveling rays are classically separated. A resonance localized on a period-5 islands chain exhibits chiral emission due to the asymmetric cavity shape. Chirality is experimentally proved in a InGaAsP multi-quantum-well semiconductor laser by showing that the experimental emission characteristics well coincide with the wave dynamical ones.
RESUMEN
We propose a novel structure that includes two compact, simply structured, and lossy waveguides for reducing back reflection in MMI combiners. The preferred lossy waveguide consists of a bend section and a tapered section. Theoretical calculations and 2D FDTD analysis were used to confirm the properties of our proposed structure. Significantly and interestingly, for TE modes, the optimized bend radius is about 7.5 µm and the specific back reflectance depends on taper end width. For TM modes, to achieve a back reflection value smaller than -30 dB, the taper length of 30 µm is desired regardless of bend radius. Moreover, the introduction of the lossy waveguide influences neither the MMI design nor its operation.
Asunto(s)
Luz , Refractometría/instrumentación , Dispersión de Radiación , Silicio/química , Diseño de EquipoRESUMEN
We propose and analyze a compact polarizing beam splitter (PBS) based on a metal-insulator-metal (MIM) structure inserted into a multimode interference coupler (MMI). Owing to the MIM structure, the TE polarized state is reflected by the cut-off condition while the TM polarized state is transmitted by the surface plasmon polariton, and the two polarized states can thus be separated. In this paper, the dependence of the reflected TE and transmitted TM field intensities on the MIM length and the gap thickness has been studied systematically. The proposed PBS structure, with a total size of 4 × 0.7 × 44 µm(3) is designed with MIM length, gap thickness, and metal thickness of 0.6 µm, 0.5 µm, and 0.05 µm, respectively. In the designed PBS, the transmittance for the TM polarized light, reflectance for the TE polarized light, extinction ratio, and insertion losses of the TE and TM modes are obtained using a 3D finite-difference time-domain method to be 0.9, 0.88, 12.55 dB, and 1.1 dB and 0.9 dB, respectively. The designed PBS has a much shorter length, 44 µm, compared to previous PBS devices.
RESUMEN
We propose an ultra-sensitive integrated photonic sensor structure using an InP-based triangular resonator, in which a surface plasmon resonance (SPR) gold film is applied on a total internal reflection mirror. We have analyzed and optimized the triangular resonator sensor structure with an extremely small SPR mirror sensing area of 3.3 × 0.35 µm2. Due to the large phase shift in the SPR mirror, a significantly enhanced sensitivity of 930 nm/RIU (refractive index unit) and the maximum peak shift of half free spectral range have been obtained at the SPR angle of 24.125° with Au thickness of 33.4 nm for the change of the refractive index Δn = 1x10(-3). This value is larger than the previous largest value in micro resonator-type biosensors. Moreover, the proposed triangular resonator sensor can be easily made in a micro structure with optical source integration.
Asunto(s)
Técnicas Biosensibles/instrumentación , Lentes , Resonancia por Plasmón de Superficie/instrumentación , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
Atmospheric plasma (AP) treatment was carried out on TiO2 nanorods (NRs) that were hydrothermally grown on F-doped SnO2 (FTO)/glass. The effects of AP treatment on the surface of the TiO2 NRs were investigated, where the treatment involved the use of the reactive gases H2, N2, and O2. The surface energy of AP-treated TiO2 NRs was about 1.5 times higher than that of untreated TiO2 NRs (364.3 mJ/m2). After AP treatment, the increase of the peak area ratios of the Ti2O3 and TiO2 peaks in the XPS spectra resulted in a decrease in the number of oxygen vacancies in the TiO2 NRs. The efficiency of a dye-sensitized solar cell (DSSC) based on the N2-plasma-treated TiO2 NRs, which was approximately 1.11%, was about 79% higher than that of a DSSC based on the untreated TiO2 NRs.
RESUMEN
We investigated the effects of surface pattern size and shape on the characteristics of hydrothermally grown ZnO nanorods. For this purpose, the structural characteristics of ZnO nanorods were examined using X-ray diffraction and scanning electron microscopy. The sputtered ZnO seed layer was patterned using photolithography techniques on a Si substrate. ZnO nanorods with a [0001] texturing structure were successfully grown on selective areas by hydrothermal processes. In our experiments, however, it was observed that the diameter and the texture of the ZnO nanorods were strongly influenced by the size of the surface pattern.
RESUMEN
We studied the effect of Zn2+ source concentration on the structural and optical properties of hydrothermally grown ZnO nanorods. The nanorods were grown on ZnO/p-Si(111) substrate using by a hydrothermal process in various concentrations of reagent at a low temperature (approximately 95 degrees C) and the structural and optical characteristics of ZnO nanorods were subsequently investigated by X-ray diffraction, field-emission scanning electron microscopy, and room temperature photoluminescence. The results demonstrate that the morphology and crystallinity of ZnO nanorods are influenced by the overall concentration of the precursor. The density and diameter of ZnO nanorods with a hexagonal structure are especially sensitivite to concentration of reactants. Furthermore, the structural transition is shown by increasing concentration. At the lowest concentration of Zn2+, the ZnO nanorods grow as single crystals with a low density and variable orientations. On the contrary, at the highest concentration, the nanorods grow as polycrystas due to the supersaturated Zn2+ source.
RESUMEN
We investigated the effect of ZnO buffer layer thickness on the growth of hydrothermally grown ZnO nanorods. A series of ZnO buffer layers with different thicknesses was deposited on a p-Si (111) substrate using a co-sputtering system. After annealing the ZnO buffer layer, ZnO nanorods grown were grown hydrothermally at 95 degrees C. Unlike ZnO nanorods grown on as-deposited ZnO buffer layer, the diameter and length of ZnO nanorods grown on annealed ZnO buffer layers can be controlled. The structural and optical properties of ZnO nanorods grown on annealed ZnO buffer layers were analyzed by field-emission scanning electron microscopy, X-ray diffraction, and photoluminescence. The influence of ZnO buffer layer thickness on ZnO nanorods growth is discussed.
RESUMEN
In this paper, we have investigated the size effect of nano scale PRAM using three-dimensional finite element analysis tool. The reset current and temperature profile of PRAM cells with top and bottom electrode contact hole size were calculated by the numerical method. And temperature profile of PRAM unit cell with size and thickness of GST thin film was simulated. As top electrode contact size was smaller, reset current decreased. But these variations couldn't affect to operate memory. On the other hand, as bottom electrode contact size was smaller, reset current abruptly decreased.
RESUMEN
In this paper, we have investigated the phase change memory device with U-shaped bottom electrode using three-dimensional finite element analysis tool. From the simulation, the reset current of PRAM with U-shaped bottom electrode is greatly reduced, compared with the conventional device. And the experimental result clearly shows that the PRAM with U-shaped bottom electrode has 35% smaller RESET current, compared with the conventional PRAM device.