A Plant-Derived Maternal Vaccine against Porcine Epidemic Diarrhea Protects Piglets through Maternally Derived Immunity.

Newborn piglets are susceptible to a highly contagious enteritis caused by the porcine epidemic diarrhea virus (PEDV), associated with high levels of mortality worldwide. There is pressing need for a rapid, safe, and cost-effective vaccine to safeguard pigs from getting infected by PEDV. PEDV belongs to the coronavirus family and is characterized by high levels of mutability. The primary goal of a PEDV vaccine is to provide immunity to newborn piglets through vaccination of sows. Plant-based vaccines are becoming more popular because they have low manufacturing costs, are easily scalable, have high thermostability, and a long shelf life. This is in contrast to conventional vaccines which include inactivated, live, and/or recombinant types that can be expensive and have limited ability to respond to rapidly mutating viruses. The binding of the virus to host cell receptors is primarily facilitated by the N-terminal subunit of the viral spike protein (S1), which also contains several epitopes that are recognized by virus-neutralizing antibodies. As a result, we generated a recombinant S1 protein using a plant-based vaccine platform. We found that the recombinant protein was highly glycosylated, comparable to the native viral antigen. Vaccination of pregnant sows at four and two weeks before farrowing led to the development of humoral immunity specific to S1 in the suckling piglets. In addition, we noted significant viral neutralization titers in both vaccinated sows and piglets. When challenged with PEDV, piglets born from vaccinated sows displayed less severe clinical symptoms and significantly lower mortality rates compared to piglets born from non-vaccinated sows.

Efficacy of a Novel Multiepitope Vaccine Candidate against Foot-and-Mouth Disease Virus Serotype O and A.

Foot-and-mouth disease (FMD) is a highly contagious and economically devastating disease in cloven-hoofed animals. To prevent the spread of FMD virus (FMDV), traditional inactivated vaccines are used to immunize susceptible animals in disease-endemic countries. However, the inactivated FMD vaccine has several limitations, including safety concerns. To overcome these limitations, subunit proteins have been studied as alternative vaccine candidates. In this study, we designed two multiepitope recombinant proteins (OVM and AVM) containing antigenic sites (residue of VP1 132-162 and residue of VP1 192-212) of three topotypes of FMDV serotype O or three topotypes of FMDV serotype A. Each recombinant protein was efficiently expressed in Escherichia coli with high solubility, and the immunogenicity and protective efficacy of the proteins as FMD vaccine candidates were evaluated. The results showed that OVM and AVM emulsified with ISA201 adjuvant induced effective antigen-specific humoral and cell-mediated immune responses and successfully protected mice from O/Jincheon/SKR/2014, O/VET/2013, and A/Malaysia/97 viruses. In addition, intramuscular immunization of pigs with the OVM and AVM emulsified with ISA201 elicited effective levels of neutralizing antibodies to the viruses with homologous epitopes. Importantly, OVM-AVM emulsified with CAvant®SOE-X adjuvant conferred 100% protection against the O/Jincheon/SKR/2014 virus with homologous residues and 75% protection against A/SKR/GP/2018 with heterologous residues. The results presented in this study suggest that the combination of OVM and AVM protein with an effective adjuvant could yield an effective and safe vaccine candidate for the prevention and control of foot-and-mouth disease. In addition, our results provide a vaccine platform that can safely, cost-efficiently, and rapidly generate protective vaccine candidates against diverse FMDVs.

Single dose of multi-clade virus-like particle vaccine protects chickens against clade 2.3.2.1 and clade 2.3.4.4 highly pathogenic avian influenza viruses.

Virus-like particles (VLPs) are recognized as an alternative vaccine platform that provide effective protection against various highly pathogenic avian influenza viruses (HPAIVs). Here, we developed multi-clade VLPs expressing two HAs (a chimera of clade 2.3.2.1c and clade 2.3.4.4c HA) within a single vector. We then compared its protective efficacy with that of a monovalent VLP and evaluated its potency against each homologous strain. Chickens vaccinated with the multi-clade VLP shed less virus and were better protected against challenge than birds receiving monovalent vaccines. Single vaccination with a multi-clade VLP resulted in 100% survival, with no clinical symptoms and high levels of pre-challenge protective immunity (7.6-8.5 log2). Moreover, the multi-clade VLP showed high productivity (128-256 HAU) both in the laboratory and on a large scale, making it cheaper than whole inactivated vaccines produced in eggs. However, the PD50 (protective dose 50%) of the multi-clade VLP against clades 2.3.2.1c and 2.3.4.4c was < 50 PD50 (28 and 42 PD50, respectively), and effective antibody response was maintained for 2-3 months. This multi-clade VLP protects against both clades of HPAI viruses and can be produced in high amounts at low cost. Thus, the vaccine has potential as a pandemic preparedness vaccine.

Immunization with porcine epidemic diarrhea virus harbouring Fc domain of IgG enhances antibody production in pigs.

Background: Outbreaks of porcine epidemic diarrhea virus (PEDV) infection have re-emerged and spread rapidly worldwide, resulting in significant economic losses. Vaccination is the best way to prevent PEDV infection in young piglets.Objective: To enhance the efficacy of an inactivated vaccine against PEDV, we evaluated the adjuvant properties of Fc domain of IgG.Methods: Fifteen crossbred gilts (180 ∼ 210 days old) were used. Five pigs in group 1 were intramuscularly vaccinated twice at 4 weeks and 2 weeks prior to farrowing with 106 TCID50 of inactivated PEDV. Five pigs in group 2 were intramuscularly vaccinated twice at 4 weeks and 2 weeks prior to farrowing with 106 TCID50 of inactivated PEDV-sFc. Five pigs in group 3 were not vaccinated and served as negative controls. Serum samples were collected at farrowing and subjected to ELISA, a serum neutralizing (SN) test, and a cytokine assay. Statistical analysis was performed by a two-tailed unpaired t-test.Results: Vero cells expressing swine IgG Fc on its surface was established. When PEDV was propagated in the cells expressing the swine Fc, PEDV virion incorporated the Fc. Immunization of pigs with inactivated PEDV harbouring Fc induced significantly higher antibody production against PEDV, comparing to the immunization with normal inactivated PEDV. In addition, we observed significantly increased IFN-γ levels in sera.Conclusion: Our results indicate that Fc molecule facilitate immune responses and PEDV harbouring Fc molecule could be a possible vaccine candidate. However, a challenge experiment would be needed to investigate the protective efficacy of PEDV harbouring Fc.

The Management of Retained Rectal Foreign Body.

PURPOSE: Because insertion of a foreign body (FB) into the anus is considered a taboo practice, patients with a retained rectal FB may hesitate to obtain medical care, and attending surgeons may lack experience with removing these FBs. We performed this study to evaluate the clinical characteristics of Korean patients with a retained rectal FB and propose management guideline for such cases based on our experience. METHODS: We retrospectively investigated 14 patients between January 2006 and December 2018. We assessed demographic features, mechanism of FB insertion, clinical course between diagnosis and management, and outcomes. RESULTS: All patients were male (mean age, 43 years) and presented with low abdominal pain (n = 2), anal bleeding (n = 2), or concern about a retained rectal FB without symptoms (n = 10). FB insertion was most commonly associated with sexual gratification or anal eroticism (n = 11, 78.6%). All patients underwent general anesthesia for anal sphincter relaxation with the exception of 2 who underwent FB removal in the emergency department. FBs were retrieved transanally using a clamp (n = 2), myoma screw (n = 1), clamp application following abdominal wall compression (n = 2), or laparotomy followed by rectosigmoid colon milking (n = 2). Colotomy and primary repair were performed in four patients, and Hartmann operation was performed in one patient with fecal peritonitis. No morbidity or mortality was reported. All patients refused postextraction anorectal functional and anatomical evaluation and psychological counseling. CONCLUSION: Retained rectal FB is rare; however, colorectal surgeons should be aware of the various methods that can be used for FB retrieval and the therapeutic algorithm applicable in such cases.

Preparation of Squalene Oil-Based Emulsion Adjuvants Employing a Self-Emulsifying Drug Delivery System and Assessment of Mycoplasma hyopneumoniae-Specific Antibody Titers in BALB/c Mice.

In this study, a self-emulsifying drug delivery system (SEDDS) was employed to prepare novel squalene oil-based emulsion adjuvants. Deionized water, 0.01% and 0.02% (w/v) carbomer solutions of C-971P NF and C-940 grades were used to prepare emulsions containing 3%, 5% and 10% of squalene oil. Altogether 15 candidate emulsions were prepared and used as adjuvants for the delivery of a combination vaccine containing a porcine circovirus type 2 (PCV2) antigen and inactivated Mycoplasma hyopneumoniae (J101 strain) antigen. Most of the emulsions showed droplet sizes in the submicron range and maintained zeta potential values between -40 mV to 0 mV for six months, indicating good physical stability as a vaccine adjuvant. Emulsion-based candidate adjuvants prepared with SEDDS technology stimulated IgG, IgG1 and IgG2a like a currently commercially available adjuvant, Montanide ISATM 201, and they were safe and their Mycoplasma hyopneumoniae-specific antibody titers were considered as comparable with that of Montanide ISATM 201.

Determination of Mycoplasma hyopneumoniae-Specific IgG, IgG1, and IgG2a Titers in BALB/c Mice Induced by Mineral Oil-Based Oil-in-Water Emulsion Adjuvants Prepared Using a Self-Emulsifying Drug Delivery System.

We prepared mineral oil-based emulsion adjuvants by employing simple self-emulsifying drug delivery system (SEDDS). Mineral oil emulsions (3%, 5%, and 7%) were prepared using deionized water and C-971P NF and C-940 grade carbomer solutions with concentrations 0.01% (w/v) and 0.02% (w/v). In total, 15 emulsions were prepared and mixed with a solution containing inactivated Mycoplasma hyopneumoniae (J101 strain) antigen and porcine circovirus type 2 antigen to prepare vaccines. Droplet sizes in the submicron range and zeta potential values between - 40 and 0 mV were maintained by most emulsion adjuvants for a period of 6 months. Emulsion adjuvants were regarded safe, and their M. hyopneumoniae-specific IgG, IgG1, and IgG2a titers were either better or comparable to those of aluminum gel.

Ultrafast fabrication of highly active BiVO4 photoanodes by hybrid microwave annealing for unbiased solar water splitting.

Hybrid microwave annealing (HMA) with a silicon susceptor in a household microwave oven produces BiVO4-based photoanodes of much improved performance in photoelectrochemical water oxidation in only 6 min relative to conventional thermal annealing in a traditional muffle furnace (FA) that needs a much longer time, 300 min. This technique can apply equally effectively to bare as well as modified BiVO4 by Mo-doping, heterojunction formation with WO3, and an oxygen evolution co-catalyst. Relative to FA, HMA forms BiVO4 films of smaller feature sizes, higher porosity, and increased three dimensional roughness, which decrease the diffusion distance of holes to the surface and thereby increase mainly the bulk charge separation efficiency (ηbulk) of the photoanodes. Thus, the HMA-treated BiVO4/WO3 film achieves the state-of-the art ηbulk of ∼90% for water oxidation. Combination of a photoanode of NiOOH/FeOOH/BiVO4/WO3 (HMA, 6 min) with a 2p c-Si solar cell allows a solar to hydrogen conversion efficiency of ∼5.0% in unbiased overall water splitting, which is also comparable to the state-of-the-art for a similar material combination.

Synthesis of high-purity, layered structured K2Ta4O11 intermediate phase nanocrystals for photocatalytic water splitting.

High-purity K2Ta4O11 (kalitantite) intermediate phase with a layered structure, as a new family member of alkali-metal tantalate semiconductors, was successfully prepared via a simple and cost-effective flux growth technique using potassium chloride (KCl) at a low temperature of 800 °C for only 4 h. The as-synthesized K2Ta4O11 was characterized by XRD, SEM, TEM, STEM/EDS, and UV-Vis DRS, etc. It was found that the K2Ta4O11 single nanocrystals were non-stoichiometric in the size range of 100-500 nm, and the indirect band gap of K2Ta4O11 was correctly determined to be 4.15 eV. The K2Ta4O11 not only exhibited a high and stable photocatalytic H2 generation rate of ∼45.3 µmol h(-1) g(-1) in an aqueous methanolic solution with the photodeposition of Pt as co-catalysts, but also possessed the photocatalytic ability for simultaneous evolution of H2 and O2 in a stoichiometric ratio, with loading of NiO particles as cocatalysts. Thus, it can be mainly attributed to the benefits of KCl flux lowing the reaction temperature, and increasing the surface area and crystallinity of K2Ta4O11, that the charge efficiency and enhancement of the photoreactivity for water splitting are improved.

Photoelectrochemical, impedance and optical data for self Sn-diffusion doped Fe2O3 photoanodes fabricated at high temperature by one and two-step annealing methods.

The optical, morphological and photoelectrochemical (PEC) properties of transition metal oxide semiconductors are important to understand their influence on water oxidation performance. Herein, we provide experimental evidences for a better understanding of the factors that dictate the interactions of Sn-diffusion doping on the PEC properties of Fe2O3 photoanodes fabricated at high temperature by one- and two-step annealing methods. The synthesis, characterization methods and other experimental details are provided. Limited previous information on the PEC and electrochemical impedance spectroscopic studies has been published. This data article contains , figures and methods related to the research article by Shinde et al. (2015) [1]. Here, we provide a further set of the obtained experimental data results.

Defective ZnFe2O4 nanorods with oxygen vacancy for photoelectrochemical water splitting.

A one-dimensional zinc ferrite (ZnFe2O4) nanorod photoanode was prepared by a simple solution method on the F-doped tin oxide glass substrate. Thermal treatment under a hydrogen or vacuum atmosphere improved the photoelectrochemical water oxidation activity up to 20 times. The various physical characterization techniques used revealed that oxygen vacancies were created by the treatments in the near surface region, which increased the donor density and passivated the surface states. Hydrogen treatment was more effective and it was important to find optimum treatment conditions to take advantage of the positive role of oxygen vacancy as a source of electron donors and avoid its negative effect as electron trap sites.

Wireless Solar Water Splitting Device with Robust Cobalt-Catalyzed, Dual-Doped BiVO4 Photoanode and Perovskite Solar Cell in Tandem: A Dual Absorber Artificial Leaf.

A stand-alone, wireless solar water splitting device without external energy supply has been realized by combining in tandem a CH3NH3PbI3 perovskite single junction solar cell with a cobalt carbonate (Co-Ci)-catalyzed, extrinsic/intrinsic dual-doped BiVO4 (hydrogen-treated and 3 at% Mo-doped). The photoanode recorded one of the highest photoelectrochemical water oxidation activity (4.8 mA/cm(2) at 1.23 VRHE) under simulated 1 sun illumination. The oxygen evolution Co-Ci co-catalyst showed similar performance to best known cobalt phosphate (Co-Pi) (5.0 mA/cm(2) at 1.23 VRHE) on the same dual-doped BiVO4 photoanode, but with significantly better stability. A tandem artificial-leaf-type device produced stoichiometric hydrogen and oxygen with an average solar-to-hydrogen efficiency of 4.3% (wired), 3.0% (wireless) under simulated 1 sun illumination. Hence, our device based on a D4 tandem photoelectrochemical cell represents a meaningful advancement in performance and cost over the device based on a triple-junction solar cell-electrocatalyst combination.

Nanostructure-Preserved Hematite Thin Film for Efficient Solar Water Splitting.

High-temperature annealing above 700 °C improves the activity of photoelectrochemical water oxidation by hematite photoanodes by increasing its crystallinity. Yet, it brings severe agglomeration of nanostructured hematite thin films and deteriorates electrical conductivity of the transparent conducting oxide (TCO) substrate. We report here that the nanostructure of the hematite and the conductivity of TCO could be preserved, while the high crystallinity is attained, by hybrid microwave annealing (HMA) utilizing a graphite susceptor for efficient microwave absorption. Thus, the hematite thin-film photoanodes treated by HMA record 2 times higher water oxidation photocurrents compared to a conventional thermal-annealed photoanode. The enhanced performance can be attributed to the synergistic effect of a smaller feature size of nanostructure-preserved hematite and a good electrical conductivity of TCO. The method could be generally applied to the fabrication of efficient photoelectrodes with small feature sizes and high crystallinity, which have been mutually conflicting requirements with conventional thermal annealing processes.

Tree branch-shaped cupric oxide for highly effective photoelectrochemical water reduction.

Highly efficient tree branch-shaped CuO photocathodes are fabricated using the hybrid microwave annealing process with a silicon susceptor within 10 minutes. The unique hierarchical, one-dimensional structure provides more facile charge transport, larger surface areas, and increased crystallinity and crystal ordering with less defects compared to irregular-shaped CuO prepared by conventional thermal annealing. As a result, the photocathode fabricated with the tree branch-shaped CuO produces an unprecedently high photocurrent density of -4.4 mA cm(-2) at 0 VRHE under AM 1.5 G simulated sunlight compared to -1.44 mA cm(-2) observed for a photocathode fabricated by thermal annealing. It is also confirmed that stoichiometric hydrogen and oxygen are produced from photoelectrochemical water splitting on the tree branch-shaped CuO photocathode and a platinum anode.

The roles of wetting liquid in the transfer process of single layer graphene onto arbitrary substrates.

Wet transfer is crucial for most device structures of the proposed applications employing single layer graphene in order to take advantage of the unique physical, chemical, bio-chemical and electrical properties of the graphene. However, transfer methodologies that can be used to obtain continuous film without voids, wrinkles and cracks are limited although film perfectness critically depends on the relative surface tension of wetting liquids on the substrate. We report the importance of wetting liquid in the transfer process with a systematic study on the parameters governing film integrity in single layer graphene grown via chemical vapor deposition. Two different suspension liquids (in terms of polar character) are tested for adequacy of transfer onto SiO2 and hexamethyldisiloxane (HMDS). We found that the relative surface tension of the wetting liquid on the surfaces of the substrate is related to transfer quality. In addition, dimethyl sulfoxide (DMSO) is introduced as a good suspension liquid to HMDS, a mechanically flexible substrate.