Psychotropic Medications Promote Time-Dependent Reduction of Suicidal Ideation in Mood Disorder: A Prospective Cohort Study.

BACKGROUND: Despite a plethora of research on the topic, there is still no solid evidence that pharmacological treatment actually reduces the risk of suicide in patients with mental illness. In this study, we aimed to assess the effect of psychotropic medications on suicidal ideation in patients with major depressive disorder (MDD) and bipolar disorder (BPD) in two age groups: less than 25 years and 25 years and older. METHODS: We analyzed 312 patients with mood disorders with current suicidal thoughts or recent suicide attempts. We followed the participants from baseline for 6 months and assessed changes in suicidal ideation with Columbia-Suicide Severity Rating Scale (C-SSRS). The effect of psychotropic drug administration on suicidal ideation over time was analyzed using a linear mixed model. RESULTS: In patients aged 25 years and older with mood disorders, suicidal ideation was more severe when using psychotropic drugs than when not using them. However, suicidal ideation decreased rapidly over time. The time-dependent reduction in suicidal ideation was accelerated when using antidepressants and sedatives/hypnotics in adult MDD, and when using mood stabilizers in adult BPD. However, this effect was not observed in participants aged less than 25 years. CONCLUSION: Adequate psychotropic medication may reduce suicidal ideation in patients with mood disorders aged 25 years and older. Additional research on psychotropic drugs is needed to effectively reduce the risk of suicide among children and adolescents with mood disorders.

Carboxylate-Based Metal-Organic Framework and Coordination Polymer Glasses: Progress and Perspectives.

ConspectusCoordination polymers (CPs) and metal-organic frameworks (MOFs) represent versatile materials with diverse structural and functional properties, making them appealing for various applications. However, their conventional forms, which are typically synthesized as powders or crystals, pose challenges due to limited processability and mechanical fragility. Recently, CP/MOF glasses have emerged as promising alternatives, offering enhanced processability while retaining some of the unique characteristics shown in the mother crystalline materials. Despite the prevalence of carboxylate ligands in CP/MOF synthesis, the development of carboxylate-based CP/MOF glasses has been limited compared to that of zeolitic-imidazole framework (ZIF)-based glasses. This is attributed to the strong metal-ligand bonds and low thermal stability of carboxylic acids, which hinder their melting in CP/MOF structures. Nonetheless, recent advancements have led to a surge in methods for synthesizing carboxylate-based CP/MOF glasses. So far, desolvation and melt-quenching have been introduced for achieving glass structures from CP/MOF precursors.The first melt-quenched MOF glass was reported in 2015 with ZIFs. However, we informally observed the melting of the MOF during thermal decomposition research of aliphatic carboxylate-based MOFs as a sacrificial template dating back to 2013. In that study, aliphatic ligands, instead of aromatic carboxylate, were employed due to their high lability, lower thermal stability, and high degree of freedom, which facilitated pyrolysis. The results were published with a focus on synthesizing hierarchically porous MgO via the pyrolysis of an aliphatic ligand-based Mg-MOF in an inert environment. A decade later, it was revisited and studied as the first melt-quenched carboxylate-based MOF glass, converted from a crystalline MOF through the liquid phase before decomposition during the heating process.This Account aims to introduce six studies, including the aforementioned example, on the synthesis of CP/MOF glasses from carboxylate-based CPs/MOFs that have been published so far. To overcome the challenges with aromatic carboxylates in CP/MOF glass formation, the metal coordination sphere should be altered and the degree of freedom in the ligands should be increased. Based on these approaches, the strategies for vitrification of carboxylate-based CPs/MOFs can be divided into two categories: desolvation and melt-quenching. Desolvation can be preceded by vapor perturbation such as hydration. Carboxylate-based CP/MOF glasses possess the potential to expand into a broader range of applications beyond those of existing CP/MOF glasses. Alongside the diversity offered by carboxylic acid ligands, these materials mirror the extensive range of applications previously explored in the existing carboxylate-based CP/MOF crystals. Moreover, their high processability, inherent to glass materials, enables their applications in various industrial fields. This versatility may extend to previously unexplored areas of utilization such as a novel class of bioactive glass.

Efficacy and Safety of Lurasidone vs. Quetiapine XR in Acutely Psychotic Patients With Schizophrenia in Korea: A Randomized, Double-Blind, Active-Controlled Trial.

OBJECTIVE: This study was performed to evaluate the efficacy and safety of lurasidone (160 mg/day) compared to quetiapine XR (QXR; 600 mg/day) in the treatment of acutely psychotic patients with schizophrenia. METHODS: Patients were randomly assigned to 6 weeks of double-blind treatment with lurasidone 160 mg/day (n=105) or QXR 600 mg/day (n=105). Primary efficacy measure was the change from baseline to week 6 in Positive and Negative Syndrome Scale (PANSS) total score and Clinical Global Impressions severity (CGI-S) score. Adverse events, body measurements, and laboratory parameters were assessed. RESULTS: Lurasidone demonstrated non-inferiority to QXR on the PANSS total score. Adjusted mean±standard error change at week 6 on the PANSS total score was -26.42±2.02 and -27.33±2.01 in the lurasidone and QXR group, respectively. The mean difference score was -0.91 (95% confidence interval -6.35-4.53). The lurasidone group showed a greater reduction in PANSS total and negative subscale on week 1 and a greater reduction in end-point CGI-S score compared to the QXR group. Body weight, body mass index, and waist circumference in the lurasidone group were reduced, with significantly lower mean change compared to QXR. Endpoint changes in glucose, cholesterol, triglycerides, and low-density lipoprotein levels were also significantly lower. The most common adverse drug reactions with lurasidone were akathisia and nausea. CONCLUSION: Lurasidone 160 mg/day was found to be non-inferior to QXR 600 mg/day in the treatment of schizophrenia with comparable efficacy and tolerability. Adverse effects of lurasidone were generally tolerable, and beneficial effects on metabolic parameters can be expected.

Childhood adversity and suicidal ideation in older Korean adults: unraveling the mediating mechanisms of mental health, physical health, and social relationships.

BACKGROUND: Suicide rates in older adults are much higher than those in younger age groups. Given the rapid increase in the proportion of older adults in Korea and the high suicide rate of this age group, it is worth investigating the mechanism of suicidal ideation for older adults. Generally, adverse childhood experiences are positively associated with suicidal ideation; however, it is not fully understood what mediating relationships are linked to the association between these experiences and current suicidal ideation. METHODS: The data from 685 older Korean adults were analyzed utilizing logistic regression, path analyses, and structural equation modeling. Based on our theoretical background and the empirical findings of previous research, we examined three separate models with mental health, physical health, and social relationship mediators. After that, we tested a combined model including all mediators. We also tested another combined model with mediation via mental health moderated by physical health and social relationships. RESULTS: The univariate logistic regression results indicated that childhood adversity was positively associated with suicidal ideation in older adults. However, multivariate logistic regression results demonstrated that the direct effect of childhood adversity became nonsignificant after accounting all variables. Three path models presented significant mediation by depression and social support in the association between childhood adversity and suicidal ideation. However, combined structural equation models demonstrated that only mediation by a latent variable of mental health problems was statistically significant. Social relationships moderated the path from mental health problems to suicidal ideation. CONCLUSIONS: Despite several limitations, this study has clinical implications for the development of effective strategies to mitigate suicidal ideation. In particular, effectively screening the exposure to adverse childhood experiences, early identification and treatment of depressive symptoms can play a crucial role in weakening the association between childhood adversity and suicidal ideation in older adults.

Development and external validation of a logistic and a penalized logistic model using machine-learning techniques to predict suicide attempts: A multicenter prospective cohort study in Korea.

Despite previous efforts to build statistical models for predicting the risk of suicidal behavior using machine-learning analysis, a high-accuracy model can lead to overfitting. Furthermore, internal validation cannot completely address this problem. In this study, we created models for predicting the occurrence of suicide attempts among Koreans at high risk of suicide, and we verified these models in an independent cohort. We performed logistic and penalized regression for suicide attempts within 6 months among suicidal ideators and attempters in The Korean Cohort for the Model Predicting a Suicide and Suicide-related Behavior (K-COMPASS). We then validated the models in a test cohort. Our findings indicated that several factors significantly predicted suicide attempts in the models, including young age, suicidal ideation, previous suicidal attempts, anxiety, alcohol abuse, stress, and impulsivity. The area under the curve and positive predictive values were 0.941 and 0.484 after variable selection and 0.751 and 0.084 in the test cohort. The corresponding values for the penalized regression model were 0.943 and 0.524 in the original training cohort and 0.794 and 0.115 in the test cohort. The prediction model constructed through a prospective cohort study of the suicide high-risk group showed satisfactory accuracy even in the test cohort. The accuracy with penalized regression was greater than that with the "classical" logistic model.

Developing prediction algorithms for late-life depression using wearable devices: a cohort study protocol.

INTRODUCTION: Despite the high prevalence of major depressive disorder (MDD) among the elderly population, the rate of treatment is low due to stigmas and barriers to medical access. Wearable devices such as smartphones and smartwatches can help to screen MDD symptoms earlier in a natural setting while forgoing these concerns. However, previous research using wearable devices has mostly targeted the younger population. By collecting longitudinal data using wearable devices from the elderly population, this research aims to produce prediction algorithms for late-life depression and to develop strategies that strengthen medical access in community care systems. METHODS AND ANALYSIS: The current cohort study recruited a subsample of 685 elderly people from the Korean Genome and Epidemiology Study-Cardiovascular Disease Association Study, a national large cohort established in 2004. The current study has been conducted over a 3-year period to explore the development patterns of late-life depression. Participants have completed three annual face-to-face interviews (baseline, the first follow-up and the second follow-up) and 2 years of app-based surveys and passive sensing data collection. All the data collection will end at the second follow-up interview. The collected self-report, observational and passive sensing data will be primarily analysed by machine learning. ETHICS AND DISSEMINATION: This study protocol has been reviewed and approved by the Yonsei University Mirae Campus Institutional Review Board (1041849-2 02 111 SB-180-06) in South Korea. All participants provided written informed consent. The findings of this research will be disseminated by academic publications and conference presentations.

Safety assessment of cocamidopropyl betaine, a cosmetic ingredient.

Cocamidopropyl betaine (CAPB) is a surfactant derived from coconut oil that is widely used in cosmetics and personal products for several purposes, such as a surfactant, foam booster, mildness, and viscosity control. Cocamidopropyl betaine is used at concentrations up to 30% in cosmetics. The acute toxicity, skin irritation, eye irritation, skin sensitization, repeated dose toxicity, genotoxicity, carcinogenicity, and phototoxicity of cocamidopropyl betaine were evaluated. Cocamidopropyl betaine was observed to induce mild skin irritation, eye irritation and skin sensitization. The NOAEL of cocamidopropyl betaine was determined to be 250 mg/kg/day based on the results of a 92-day repeated-dose oral toxicity study in rats. The systemic exposure dose of cocamidopropyl betaine was estimated to range from 0.00120 to 0.93195 mg/kg/day when used in cosmetic products. The margin of safety of cocamidopropyl betaine was calculated to be greater than 100 when used at a maximum concentration of 6% in leave-on products and 30% in rinse-off products, suggesting that its use in cosmetic products is safe under current usage conditions.

Effects of Neuromuscular Electrical Stimulation with Gastrocnemius Strengthening on Foot Morphology in Stroke Patients: A Randomized Controlled Trial.

This study aimed to investigate the effects of neuromuscular electrical stimulation (NMES) with gastrocnemius (GCM) strength exercise on foot morphology in patients with stroke. Herein, 31 patients with chronic stroke meeting the study criteria were enrolled and divided into two groups; 16 patients were randomized to the gastrocnemius neuromuscular electrical stimulation (GCMNMES) group, and 15 patients to the conventional neuromuscular electrical stimulation (CNMES) group. The GCMNMES group conducted GCM-strengthening exercise with NMES. CNMES group conducted NMES at paretic tibialis anterior muscle with ankle dorsiflexion movement. These patients underwent therapeutic interventions lasting 30 min/session, five times a week for 4 weeks. To analyze changes in foot morphology, 3D foot scanning was used, while a foot-pressure measurement device was used to evaluate foot pressure and weight-bearing area. In an intra-group comparison of 3D-foot-scanning results, the experimental group showed significant changes in longitudinal arch angle (p < 0.05), medial longitudinal arch angle (MLAA) (p < 0.01), transverse arch angle (TAA) (p < 0.01), rearfoot angle (RA) (p < 0.05), foot length (FL) (p < 0.05), foot width (FW) (p < 0.05), and arch height index (AHI) (p < 0.01) of the paretic side and in TAA (p < 0.05) and AHI (p < 0.05) of the non-paretic side. The CNMES group showed significant changes in TAA (p < 0.05) and FW (p < 0.05) of the paretic side and TAA (p < 0.05) and AHI (p < 0.05) of the non-paretic side. An inter-group comparison showed significant differences in MLAA (p < 0.05) and RA (p < 0.05) of the paretic side. In an intra-group comparison of foot pressure assessment, the experimental group showed significant differences in footprint area (FPA) (p < 0.05) of the paretic side and FPA symmetry (p < 0.05). The CNMES group showed a significant difference in only FPA symmetry (p < 0.05). An inter-group comparison showed no significant difference between the two groups (p < 0.05). Thus, NMES with GCM-strengthening exercises yielded positive effects on foot morphology in patients with stroke.

Melt-quenched carboxylate metal-organic framework glasses.

Although carboxylate-based frameworks are commonly used architectures in metal-organic frameworks (MOFs), liquid/glass MOFs have thus far mainly been obtained from azole- or weakly coordinating ligand-based frameworks. This is because strong coordination bonds of carboxylate ligands to metals block the thermal vitrification pathways of carboxylate-based MOFs. In this study, we present the example of carboxylate-based melt-quenched MOF glasses comprising Mg2+ or Mn2+ with an aliphatic carboxylate ligand, adipate. These MOFs have a low melting temperature (Tm) of 284 °C and 238 °C, respectively, compared to zeolitic-imidazolate framework (ZIF) glasses, and superior mechanical properties in terms of hardness and elastic modulus. The low Tm may be attributed to the flexibility and low symmetry of the aliphatic carboxylate ligand, which raises the entropy of fusion (ΔSfus), and the lack of crystal field stabilization energy on metal ions, reducing enthalpy of fusion (ΔHfus). This research will serve as a cornerstone for the integration of numerous carboxylate-based MOFs into MOF glasses.

Predicting Receiver Characteristics without Sensors in an LC-LC Tuned Wireless Power Transfer System Using Machine Learning.

Improvement of wireless power transfer (WPT) systems is necessary to tackle issues of power transfer efficiency, high costs due to sensor and communication requirements between the transmitter (Tx) and receiver (Rx), and maintenance problems. Analytical techniques and hardware-based synchronization research for Rx-sensorless WPT may not always have been available or accurate. To address these limitations, researchers have recently employed machine learning (ML) to improve efficiency and accuracy. The objective of this work was to replace Tx-Rx communication with ML, utilizing Tx-side parameters to predict the load and coupling coefficients on an LC-LC tuned WPT system. Based on current and voltage features collected on the Tx-side for various load and coupling coefficient values, we developed two models for each load and coupling prediction. This study demonstrated that the extra trees regressor effectively predicted the characteristics of LC-LC tuned WPT systems, with coefficients of determination of 0.967 and 0.996 for load and coupling, respectively. Additionally, the mean absolute percentage errors were 0.11% and 0.017%.

Quantum computing dataset of maximum independent set problem on king lattice of over hundred Rydberg atoms.

Finding the maximum independent set (MIS) of a large-size graph is a nondeterministic polynomial-time (NP)-complete problem not efficiently solvable with classical computations. Here, we present a set of quantum adiabatic computing data of Rydberg-atom experiments performed to solve the MIS problem of up to 141 atoms randomly arranged on the king lattice. A total of 582,916 events of Rydberg-atom measurements are collected for experimental MIS solutions of 733,853 different graphs. We provide the raw image data along with the entire binary determinations of the measured many-body ground states and the classified graph data, to offer bench-mark testing and advanced data-driven analyses for validation of the performance and system improvements of the Rydberg-atom approach.

The short-term effect of ambient particulate matter on suicide death.

BACKGROUND: Air pollution can cause various respiratory and neurological diseases and continuous exposure can lead to death. Previous studies have reported that particulate matter (PM) exposure increases the risk of depression, suicidal thoughts, and suicidal death; however, the results are inconsistent and limited. This study aimed to examine the relationship between short-term PM exposure and suicide deaths, as well as investigate the short-term effects of PM on suicide death within vulnerable groups based on factors such as sex, age group, suicide-related information (note, method, and cause), psychiatric disorders, and physical diseases. METHODS: Data on a total of 28,670 suicide deaths from 2013 to 2017, provided by the Korea Foundation for Suicide Prevention, were analyzed. The study design employed a time-series analysis with a two-stage approach. In the first step, a generalized additive model combined with a distributed lag nonlinear model was used to estimate the short-term effect of PM exposure on suicide risk specific to each city. In the second step, the estimated results from each city were pooled through a meta-analysis to derive the overall effect. We determined the effects of single lag, cumulative lag, and moving average PM concentrations from days 0-7 before suicide. RESULTS: We confirmed an association between exposure to PM10 (≤ 10 µm in diameter) and deaths due to suicide. In particular, among individuals with psychiatric disorders and those who employed non-violent suicide methods, increased exposure to PM10 was associated with a higher risk of death by suicide, with percentage changes of 5.92 (95% confidence interval [CI]: 3.95-7.92) and 11.47 (95% CI: 7.95-15.11), respectively. Furthermore, in the group with psychiatric disorders, there was an observed tendency of increasing suicide risk as PM10 levels increased up to 120 µg/m3, whereas in the group with non-violent suicide deaths, there was a pronounced trend of rapid increase in suicide risk with an increase in PM10 up to 100 µg/m3. CONCLUSIONS: These results show an association between short-term exposure to PM and suicide. Our study adds evidence for the benefits of reducing PM in preventing diseases and improving mental health.

Sex differences in the factors that affect medical lethality in elderly suicide attempters.

Objectives: This study aimed to identify sex differences in the factors that affect medical lethality in elderly suicide attempters. Methods: A total of 253 elderly suicide attempters and 351 middle-aged attempters (comparison group) who visited the emergency room at a general hospital were included. The sociodemographic and clinical characteristics of the patients were investigated. The Chi-squared test and logistic regression analysis were performed. And Spearman's correlation coefficient was calculated. Results: In older males, the risk of high lethality was lower when attempting suicide due to the loss of family members [adjusted odds ratio (AOR): 0.08]. The risk increased as the intent to die became more certain (some AOR: 11.31, certain AOR: 28.75), and this association became more pronounced with age (rho middle-aged: 0.329; young-old: 0.387; old-old: 0.415). In older females, the risk was lower when employed (AOR: 0.28). The method of suicide attempt also affected lethality (agricultural chemicals AOR: 3.71; psychiatric medication AOR: 0.31). Conclusion: Sex differences in the factors that affect medical lethality were identified among elderly suicide attempters. In particular, medical lethality can be predicted by the degree of suicide intention in older males. These findings will help to establish more efficient preventive strategies with specific targets.

3D microprinting of inorganic porous materials by chemical linking-induced solidification of nanocrystals.

Three-dimensional (3D) microprinting is considered a next-generation manufacturing process for the production of microscale components; however, the narrow range of suitable materials, which include mainly polymers, is a critical issue that limits the application of this process to functional inorganic materials. Herein, we develop a generalised microscale 3D printing method for the production of purely inorganic nanocrystal-based porous materials. Our process is designed to solidify all-inorganic nanocrystals via immediate dispersibility control and surface linking-induced interconnection in the nonsolvent linker bath and thereby creates multibranched gel networks. The process works with various inorganic materials, including metals, semiconductors, magnets, oxides, and multi-materials, not requiring organic binders or stereolithographic equipment. Filaments with a diameter of sub-10 µm are printed into designed complex 3D microarchitectures, which exhibit full nanocrystal functionality and high specific surface areas as well as hierarchical porous structures. This approach provides the platform technology for designing functional inorganics-based porous materials.

Impact of Parental Mental Health and Help-Seeking on Adolescents' Suicidal Ideations and Help-Seeking Behaviors.

This study aimed to evaluate the impact of parental mental health on adolescent offspring. Data regarding 6512 families from the 2010-2021 Korean National Health and Nutrition Examination Survey were analyzed; among them, 428 were placed in the suicidal ideation (SI) group and 421 were placed in the matched control (MC) group. This number was selected for the use of the propensity score matching method. The findings highlighted significant associations between parental mental health and adolescent suicidal ideation, with mothers in the SI group having higher odds of Diagnosed Depression (OR 2.109, 1.023-4.350 95% CI), Depressive Mood (OR 2.155, 1.224-3.793 95% CI), and Suicidal Ideation (OR 2.532, 1.322-4.851 95% CI) compared to the MC group. Regarding the fathers, paternal Suicidal Ideation (OR 4.295, 1.747-10.599 95% CI) was the only significant factor for adolescent suicidal ideation. In contrast, maternal depressive symptoms and help-seeking behavior significantly impacted adolescent help-seeking; Maternal Depressive Mood increased with adolescent Help-Seeking (OR 4.486, 1.312-15.340 95% CI) while Maternal Suicidal Ideation reduced the probability of Help-Seeking in the SI group (OR 0.15, 0.031-0.721, 95% CI). Chronic and severe depressive symptoms in mothers could make adolescents less likely to seek help for their suicidal ideations. Therefore, clinicians working with adolescents should prioritize a family-oriented approach.

Monitoring arsenic species concentration in rice-based processed products distributed in South Korean markets and related risk assessment.

Rice is an important grain as a major source of carbohydrates in Asia but contains more arsenic (As) than other grains. A total of 239 rice-based processed foods (rice, n = 30; rice cake, n = 30; porridge, n = 39; noodles, n = 33; bread, n = 20; snack, n = 59; powder, n = 28) were purchased in 2019 from domestic markets to measure total As (tAs) and As species. The average tAs and inorganic As (iAs) in each sample group ranged from 20 to 180 µg/kg (porridge for baby to noodle) and 4.4-85 µg/kg (porridge for baby to powder), respectively. The correlation between the iAs and tAs was affected by the variety of ingredients, such as the presence of seaweed (tAs) and the milling type of rice (iAs). Although rice cakes and baby rice-based powders are a source of concern for both adults and children, respectively, risk assessments indicate that most rice-based foods are generally safe to consume in South Korea. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-023-01270-9.

Computational Prediction of Stacking Mode in Conductive Two-Dimensional Metal-Organic Frameworks: An Exploration of Chemical and Electrical Property Changes.

Conductive two-dimensional metal-organic frameworks (2D MOFs) have attracted interest as they induce strong charge delocalization and improve charge carrier mobility and concentration. However, characterizing their stacking mode depends on expensive and time-consuming experimental measurements. Here, we construct a potential energy surface (PES) map database for 36 2D MOFs using density functional theory (DFT) for the experimentally synthesized and non-synthesized 2D MOFs to predict their stacking mode. The DFT PES results successfully predict the experimentally synthesized stacking mode with an accuracy of 92.9% and explain the coexistence mechanism of dual stacking modes in a single compound. Furthermore, we analyze the chemical (i.e., host-guest interaction) and electrical (i.e., electronic structure) property changes affected by stacking mode. The DFT results show that the host-guest interaction can be enhanced by the transition from AA to AB stacking, taking H2S gas as a case study. The electronic band structure calculation confirms that as AB stacking displacement increases, the in-plane charge transport pathway is reduced while the out-of-plane charge transport pathway is maintained or even increased. These results indicate that there is a trade-off between chemical and electrical properties in accordance with the stacking mode.

Childhood adversity and late-life depression: moderated mediation model of stress and social support.

Background: As life expectancy increases, understanding the mechanism for late-life depression and finding a crucial moderator becomes more important for mental health in older adults. Childhood adversity increases the risk of clinical depression even in old age. Based on the stress sensitivity theory and stress-buffering effects, stress would be a significant mediator, while social support can be a key moderator in the mediation pathways. However, few studies have tested this moderated mediation model with a sample of older adults. This study aims to reveal the association between childhood adversity and late-life depression in older adults, taking into consideration the effects of stress and social support. Methods: This study used several path models to analyze the data from 622 elderly participants who were never diagnosed with clinical depression. Results: We found that childhood adversity increases the odds ratio of depression by approximately 20% in older adults. Path model with mediation demonstrates that stress fully mediates the pathway from childhood adversity to late-life depression. Path model with moderated mediation also illustrates that social support significantly weakens the association between childhood adversity and perceived stress. Conclusion: This study provides empirical evidence to reveal a more detailed mechanism for late-life depression. Specifically, this study identifies one crucial risk factor and one protective factor, stress and social support, respectively. This brings insight into prevention of late-life depression among those who have experienced childhood adversity.

Beyond DNA sensing: expanding the role of cGAS/STING in immunity and diseases.

Cyclic guanosine monophosphate-adenosine monophosphate (cGAMP) synthase (cGAS) is a DNA sensor that elicits a robust type I interferon response by recognizing ubiquitous danger-associated molecules. The cGAS/stimulator of interferon genes (cGAS/STING) is activated by endogenous DNA, including DNA released from mitochondria and extranuclear chromatin, as well as exogenous DNA derived from pathogenic microorganisms. cGAS/STING is positioned as a key axis of autoimmunity, the inflammatory response, and cancer progression, suggesting that the cGAS/STING signaling pathway represents an efficient therapeutic target. Based on the accumulated evidence, we present insights into the prevention and treatment of cGAS/STING-related chronic immune and inflammatory diseases. This review presents the current state of clinical and nonclinical development of modulators targeting cGAS/STING, providing useful information on the design of therapeutic strategies.

Systemic Lupus Erythematosus and Lung Involvement: A Comprehensive Review.

Systemic lupus erythematosus (SLE) is a complex autoimmune disease with multiorgan manifestations, including pleuropulmonary involvement (20-90%). The precise mechanism of pleuropulmonary involvement in SLE is not well-understood; however, systemic type 1 interferons, circulating immune complexes, and neutrophils seem to play essential roles. There are eight types of pleuropulmonary involvement: lupus pleuritis, pleural effusion, acute lupus pneumonitis, shrinking lung syndrome, interstitial lung disease, diffuse alveolar hemorrhage (DAH), pulmonary arterial hypertension, and pulmonary embolism. DAH has a high mortality rate (68-75%). The diagnostic tools for pleuropulmonary involvement in SLE include chest X-ray (CXR), computed tomography (CT), pulmonary function tests (PFT), bronchoalveolar lavage, biopsy, technetium-99m hexamethylprophylene amine oxime perfusion scan, and (18)F-fluorodeoxyglucose positron emission tomography. An approach for detecting pleuropulmonary involvement in SLE includes high-resolution CT, CXR, and PFT. Little is known about specific therapies for pleuropulmonary involvement in SLE. However, immunosuppressive therapies such as corticosteroids and cyclophosphamide are generally used. Rituximab has also been successfully used in three of the eight pleuropulmonary involvement forms: lupus pleuritis, acute lupus pneumonitis, and shrinking lung syndrome. Pleuropulmonary manifestations are part of the clinical criteria for SLE diagnosis. However, no review article has focused on the involvement of pleuropulmonary disease in SLE. Therefore, this article summarizes the literature on the epidemiology, pathogenesis, diagnosis, and management of pleuropulmonary involvement in SLE.