Comparison of morbidity-related parameters between autologous and allogeneic bone grafts for alveolar ridge augmentation from patients' perspective-A questionnaire-based cohort study.

INTRODUCTION: Alveolar ridge augmentation is often required before dental implant placement. In this context, autologous bone grafts are considered the biological gold standard. Still, bone block harvesting is accompanied by some serious potential disadvantages and possible complications, such as pain, bleeding, and nerve irritation. Several studies aimed to compare autologous to allogeneic bone grafts concerning bone quality and implant survival rates; this is the first prospective study analyzing and comparing morbidity-related parameters after alveolar ridge augmentation using autogenous and allogeneic bone blocks from patients' perspective. METHODS: Using a questionnaire, 36 patients were asked to evaluate the surgery as well as the post-operative period concerning pain, stress, sensibility deficits, satisfaction with, and consequences from the surgery as well as the preferred procedure for future alveolar ridge augmentations. RESULTS: No significant differences were shown regarding stress and pain during and after surgery, whereas the rate of nerve irritations was twice as high in the autologous group. The swelling was significantly higher in patients with autologous bone blocks (p = 0.001). Nevertheless, the overall satisfaction of patients of both groups was very high, with over 8/10 points. CONCLUSIONS: The swelling was the main reason for patients' discomfort in both groups and was significantly higher after autologous bone augmentation. Since this side effect seems to be a highly relevant factor for patients' comfort and satisfaction, it needs to be discussed during preoperative consultation to allow shared decision-making considering the anticipated morbidity.

First Clinical Case Report of a Xenograft-Allograft Combination for Alveolar Ridge Augmentation Using a Bovine Bone Substitute Material with Hyaluronate (Cerabone® Plus) Combined with Allogeneic Bone Granules (Maxgraft®).

BACKGROUND: A patient had lost the first left maxillary incisor in the esthetic zone. METHODS: The defect in the alveolar ridge was reconstructed for an implant-supported restoration using a new xenogeneic bone substitute containing hyaluronate, which was used in combination with allogeneic bone granules. RESULTS: After three years of follow-up, the dental implant was stable and showed no signs of infection. CONCLUSIONS: This is the first case report with a long-term follow-up time of three years of a successful clinical application of a xenograft-allograft combination (cerabone® plus combined with maxgraft®) for alveolar ridge augmentation before dental implantation. Cerabone® plus offers volume stability, provides reliable and efficient structural support of the oral soft tissues in the augmented region (particularly crucial in the aesthetic zone), and preserves the alveolar ridge shape.

The allogeneic shell technique for alveolar ridge augmentation: a multicenter case series and experiences of more than 300 cases.

PURPOSE: Allogeneic cortical bone plates (CP) might be used for alveolar ridge augmentation as an alternative to autogenous grafts (AG) and bone substitutes (BS). We report about a multicenter case series and our experiences of more than 300 cases using CP and the shell technique for reconstruction of the alveolar process to illustrate surgical key steps, variations, and complication management. METHODS: Different types of alveolar ridge defects were augmented using the shell technique via CP. The space between the CP and the alveolar bone was filled with either autogenous or allogeneic granules (AUG, ALG) or a mixture of both. Implants were placed after 4-6 months. Microscopic and histological assessments were performed. In addition, space filling using AUG, ALG and bovine BS was discussed. RESULTS: Scanning electron microscopy demonstrated the compact cortical structure of CP and the porous structure of ALG allowing micro-vessel ingrowth and bone remodeling. Histological assessment demonstrated sufficient bone remodeling and graft resorption after 4-6 months. In total, 372 CP cases and 656 implants were included to data analysis. The mean follow-up period was about 3.5 years. Four implants failed, while all implant failures were caused by peri-implantitis. Next, 30 CP complications were seen, while in 26 CP complications implant placement was possible. CP rehydration, stable positioning by adjusting screws, smoothing of sharp edges, and a tension-free wound closure were identified as relevant success factors. Space filling using ALG and a mixture of AUG/ALG resulted in sufficient bone remodeling, graft resorption and stability of the augmented bone. CONCLUSIONS: CP and the shell technique is appropriate for alveolar ridge augmentation with adequate bone remodeling and low complication rates. Allografts can prevent donor site morbidity and therefore may decrease discomfort for the patient.

Risk Factors for Complications Following Staged Alveolar Ridge Augmentation and Dental Implantation: A Retrospective Evaluation of 151 Cases with Allogeneic and 70 Cases with Autogenous Bone Blocks.

Purpose: the aim of this study was to identify potential risk factors favoring complications by assessing the number and types of complications associated with allogeneic or autogenous bone blocks applied as onlay grafts for alveolar ridge augmentation prior to implantation. Methods: A retrospective chart review on the success of 151 allogeneic and 70 autogenous bone blocks in a cohort of 164 consecutive patients, who were treated over a period of 6 years by the same surgeon, was conducted. Statistical conclusions were based on ROC curves and multiple logistic regression models. Results: Complications were observed more frequently with autogenous bone blocks (14 out of 70 cases; 20%) compared to allogeneic bone blocks (12 out of 151 cases; 7.9%; p = 0.013). However, these complications were minor and did not impact the successful dental rehabilitation. In a multiple logistic regression model, the risk of a complication was increased by the use of an autogenous bone block (OR = 3.2; p = 0.027), smoking (OR = 4.8; p = 0.007), vertical augmentation above a threshold of 2.55 mm (OR = 5.0; p = 0.002), and over-contouring (OR = 15.3; p < 0.001). Conclusions: Overall, the complication rate of ridge augmentations carried out with autogenous or allogeneic bone blocks was low. Despite previous recommendations, over-contouring and a vertical augmentation above a threshold of 2.55 mm should be avoided.

Customized allogeneic bone grafts for maxillary horizontal augmentation: A 5-year follow-up radiographic and histologic evaluation.

We report the histological evaluation of an individualized allogeneic bone block 5 years after alveolar ridge augmentation. The biopsy showed a well-vascularized lamellar bone with fatty incorporations without any avital allograft remnants. The presence of osteocytes, lining cells, macrophages, and blood vessels indicated a healthy and vital bone tissue.

Comparison of allogeneic and autogenous bone grafts for augmentation of alveolar ridge defects-A 12-month retrospective radiographic evaluation.

OBJECTIVES: The aim of this study was to compare three-dimensional alterations following the use of autogenous versus allogeneic onlay grafts for augmentation at single tooth defects. MATERIALS AND METHODS: Alveolar bone width at specific implant sites were assessed using sagittal and cross-sectional CBCT images prior grafting and at three subsequent time points. Twenty-one patients received autogenous bone blocks harvested from the retromolar region and another 21 patients received freeze-dried cancellous allogeneic bone blocks. RESULTS: The vertical and horizontal dimensions did not significantly differ between autogenous and allogeneic bone grafts at any time point. In addition, there were no statistically significant differences in graft remodeling rates between autogenous (mean shrinkage rate after 12 months: 12.5% ± 7.8%) and allogeneic onlay grafts (mean shrinkage rate after 12 months: 14.4% ± 9.8%). CONCLUSIONS: Freeze-dried cancellous allogeneic bone blocks showed equivalent volumetric shrinkage rates as autogenous bone blocks when used for treating circumscribed bone defects classified as Type-II to Type-IV according to the ITI-treatment guide categories. Therefore, it is not necessary to over-contour the alveolar ridge when using allogeneic blocks for treating single tooth defects, but to apply the same procedure as when using autogenous blocks.

Long-lived murine osteocytes are embodied by craniofacial skeleton in young and old animals whereas they decrease in number in postcranial skeletons at older ages.

BACKGROUND: Osteocytes are engaged in life-enduring processes such as bone remodelling, fracture healing or osseointegration of implants. Over age, ossification processes and regenerative capacity can greatly differ in mandible and femur. OBJECTIVE: Mesenchymal stem cells from cranial and postcranial bones are of different embryologic origin. This may be the reason why the regenerative capacity differs between cranial and postcranial bones in old patients. It was hypothesised that different ageing patterns, reflected by osteocyte density, lacunar density and osteoid formation, exist between murine mandibles and femurs. MATERIAL AND METHODS: Mandible and femur of young (4 months) and old (34-36 months old) male C57Bl/6 mice were histologically investigated to determine the number of lacunae occupied with osteocytes. Osteoid formation was revealed by Masson-Goldner staining, and the spatial distribution of BMP-2 synthesis was examined. RESULTS: Over lifetime, the number of lacunae occupied with osteocytes only showed a modest decrease in mandibular bone (old 85.63%/young 91.12%) while greatly diverging in the femur (old 55.99%/young 93.28%). In equal measure, old femur exhibited less osteoid formation and decreased BMP-2 expression. CONCLUSION: Tissue-specific conduct of bone ageing is moulded by osteocytic activities, which was found to vary between postcranial and craniofacial skeleton. The latter harbours long-lived osteocytes also in old animals which assures lifelong bone integrity. Preliminary concurring findings from a human cadaver, also presented in this contribution, provided a rationale for recommending the translatability to humans.

A comparative in vivo study of strontium-functionalized and SLActive™ implant surfaces in early bone healing.

PURPOSE: Studies have shown that strontium-doped medical applications benefit bone metabolism leading to improved bone healing and osseointegration. Based on this knowledge, the aim of the study was to evaluate the performance of an implant surface, functionalized by a physical vapor deposition (PVD) coating (Ti-Sr-O), designed to yield predictable release of strontium. The Ti-Sr-O functionalized surface is compared to a routinely used, commercially available surface (SLActive™) with respect to bone-to-implant contact (BIC%) and new bone formation (BF%) in two defined regions of interest (ROI-I and ROI-II, respectively). MATERIALS AND METHODS: Ti-Sr-O functionalized, SLActive, and Grade 4 titanium implants were inserted in the femoral condyle of adult male New Zealand White rabbits. The PVD magnetron-sputtered Ti-Sr-O surface coating was characterized using scanning electron microscopy (SEM) for morphology and coating thickness. Strontium release and mechanical stability of the coating, under simulated insertion conditions, were evaluated. Furthermore, histomorphometrical BIC and BF were carried out 2 weeks after insertion. RESULTS: Histomorphometry revealed increased bone formation of Ti-Sr-O with significant differences compared to SLActive and Grade 4 titanium in both regions of interest, ROI-I and ROI-II, at 0-250 µm and 250-500 µm distance from the implant surfaces. Analogous results of bone-to-implant contact were observed for the two modified surfaces. CONCLUSION: The results show that a nanopatterned Ti-Sr-O functionalized titanium surface, with sustained release of strontium, increases peri-implant bone volume and could potentially contribute to enhancement of bone anchorage of osseointegrated implants.

Comparing the effect of strontium-functionalized and fluoride-modified surfaces on early osseointegration.

BACKGROUND: Studies have shown that medical devices comprising strontium contribute to bone healing and osseointegration. The aim of this study was to evaluate the in vivo performance of surface-functionalized implants (Ti-Sr-O) showing predictable release characteristics of strontium and compare it to performance a commercially available fluoride-modified surface. METHODS: Ti-Sr-O functionalized, fluoride-modified,  Grade 4 titanium implants were inserted in the femoral condyle of adult male New Zealand white rabbits. Atomic absorption spectrometry (AAS) was utilized to monitor strontium blood serum levels. Two weeks after insertion, histomorphometric evaluation was performed with respect to bone-to-implant contact (BIC%) and bone formation (BF%) using defined regions of interest. RESULTS: Mean values for BIC% showed a comparable degree of osseointegration for Ti-Sr-O and the fluoride-modified surface, while BF% revealed a significant difference in increased BF with Ti-Sr-O. AAS measurements did not indicate any influence of the Ti-Sr-O modified implants on the strontium blood serum concentrations. CONCLUSIONS: Within the limitations of this study, it was shown that the Ti-Sr-O coating, with sustained release characteristics of strontium, enhanced bone apposition and, thus, could find practical applications, e.g., within the field of medical implantology.

Effect of strontium surface-functionalized implants on early and late osseointegration: A histological, spectrometric and tomographic evaluation.

Numerous in vivo, in vitro and clinical studies report on beneficial effects of strontium with respect to increased bone growth. Based on this knowledge the aim of this study was to evaluate early and late osseointegration stages of functionalized titanium implants showing sustained release of strontium (Sr) and further investigate its potential systemic effect. Strontium functionalized (Ti-Sr-O) and Grade 4 (Control) titanium implants were inserted in the femoral condyle of New Zealand White rabbits. The Ti-Sr-O coating was characterized using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDX) for structure, coating thickness and chemical composition. Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) was used to evaluate released strontium in vitro while Atomic Absorption Spectrometry (AAS) was utilized to monitor serum levels of strontium and calcium. Additionally, histological and tomographic analysis of bone-to-implant contact (BIC%) and bone formation (BF%) was performed, following implantation periods of two or twelve weeks, respectively. Median values for BIC% for Ti-Sr-O revealed significant differences within the two- and twelve-week observation periods, while exceeding BF% was discovered especially after twelve weeks when performing the histological evaluation. The results from the micro-computed tomography (µ-CT) showed no significant differences, when comparing the experimental groups. AAS measurements did not indicate a systemic effect by the local strontium release. Within the limitations of the study, it was shown that a Ti-Sr-O coating with sustained release characteristics of strontium, accelerates bone apposition and represents a potential potent surface modification for endosseous medical implant devices. STATEMENT OF SIGNIFICANCE: This study presents first data with respect to early and late in vivo response on a strontium functionalized titanium surface comprising a nanotopography manufactured by a magnetron sputtering process. We investigated different osseointegration stages of screw-shaped implants with dental implant geometries in a rabbit femur model observing beneficial effects of the functionalized surface on bone-to-implant contact and bone formation caused by tailored release of the bone anabolic strontium. Histomorphometrical data revealed that a functionalized titanium surface with controlled liberation of strontium accelerates osseointegration while spectrometry measurements did not indicate a potential systemic effect of this osteoinductive agent and could thus have impact on modifications of medical implant devices.

A domestic porcine model for studying the effects of radiation on head and neck cancers.

BACKGROUND: Radiation therapy (RT) of the head and neck region is often accompanied by serious side effects. Research in this area is needed to improve treatment outcomes and ameliorate therapy tolerance. Laboratory rodents are barely matching today's clinical standards in RT research. Yet domestic swine (Sus scrofa domestica) have previously proved suitable for various advanced tests in clinical research and training. We therefore investigated whether S. scrofa domestica is also appropriate for irradiation of the mandible. STUDY DESIGN: A common scheme for irradiation treatment of S. scrofa domestica mandibles in a split-mouth design was acquired by applying computed tomography (CT) scanning under sedation. Basing on close anatomic resemblance, a standard treatment plan comprising 2 opposed irradiation fields could be accomplished. RESULTS: RT was carried out in a clinical environment with 2 × 9 Gy. The resulting operating procedure facilitated complication-free sedation, transport, positioning, CT scanning, and effective irradiation. CONCLUSION: Based on common standards applied for RT in humans, domestic pigs can be employed to progress RT clinical research. Due to their human-like anatomy, physiology, size, and weight, the swine model is expedient for advancing experimental RT of the head and neck area.

Impact of Dental Implant Surface Modifications on Osseointegration.

Objective. The aim of this paper is to review different surface modifications of dental implants and their effect on osseointegration. Common marketed as well as experimental surface modifications are discussed. Discussion. The major challenge for contemporary dental implantologists is to provide oral rehabilitation to patients with healthy bone conditions asking for rapid loading protocols or to patients with quantitatively or qualitatively compromised bone. These charging conditions require advances in implant surface design. The elucidation of bone healing physiology has driven investigators to engineer implant surfaces that closely mimic natural bone characteristics. This paper provides a comprehensive overview of surface modifications that beneficially alter the topography, hydrophilicity, and outer coating of dental implants in order to enhance osseointegration in healthy as well as in compromised bone. In the first part, this paper discusses dental implants that have been successfully used for a number of years focusing on sandblasting, acid-etching, and hydrophilic surface textures. Hereafter, new techniques like Discrete Crystalline Deposition, laser ablation, and surface coatings with proteins, drugs, or growth factors are presented. Conclusion. Major advancements have been made in developing novel surfaces of dental implants. These innovations set the stage for rehabilitating patients with high success and predictable survival rates even in challenging conditions.

Bone regenerating effect of surface-functionalized titanium implants with sustained-release characteristics of strontium in ovariectomized rats.

Since strontium (Sr) is known for its anabolic and anticatabolic effect on bone, research has been focused on its potential impact on osseointegration. The objective of this study was to investigate the performance of nanotopographic implants with a Sr-functionalized titanium (Ti) coating (Ti-Sr-O) with respect to osseointegration in osteoporotic bone. The trial was designed to examine the effect of sustained-release characteristics of Sr in poor-quality bone. Three Ti-Sr-O groups, which differed from each other in coating thickness, Sr contents, and Sr release, were examined. These were prepared by a magnetron sputtering process and compared to uncoated grade 4 Ti. Composition, morphology, and mechanical stability of the coatings were analyzed, and Sr release data were gained from in vitro washout experiments. In vivo investigation was carried out in an osteoporotic rat model and analyzed histologically, 6 weeks and 12 weeks after implantation. Median values of bone-to-implant contact and new bone formation after 6 weeks were found to be 84.7% and 54.9% (best performing Sr group) as compared to 65.2% and 23.8% (grade 4 Ti reference), respectively. The 12-week observation period revealed 84.3% and 56.5% (best performing Sr group) and 81.3% and 39.4% (grade 4 Ti reference), respectively, for the same measurements. The increase in new bone formation was found to correlate with the amount of Sr released in vitro. The results indicate that sputtered nanostructured Ti-Sr-O coatings showed sustained release of Sr and accelerate osseointegration even in poor-quality bone, and thus, may have impact on practical applications for medical implants.

Osteoneogenesis due to periosteal elevation with degradable and nondegradable devices in Göttingen Minipigs.

INTRODUCTION: Periosteal distraction or elevation has been known as an experimental method to induce new bone formation. Although it uses the principles of distraction osteogenesis no further osteotomy is necessary. The purpose of this study was to test devices of different materials and to evaluate the point of origin of the new bone formation. MATERIAL & METHODS: On each calvaria of twelve male adult Göttingen Minipigs three devices were implanted. The materials used were degradable PDLLA (poly-DL-lactide), PGA (polyglycolic acid) and nondegradable Ti (titanium). After a consolidation time of 2, 4 and 6 weeks days a total of 36 specimens were harvested. To identify the total amount of newly created bone, micro-CT and histological analysis were performed. RESULTS: All degradable devices collapsed to a certain extent within the observation time but osteoneogenesis took place in all materials after a consolidation time of 2, 4 and 6 weeks after implantation above and under the devices. No statistical significant differences between the materials were found. However, most bone formation took place in the space under the periosteum and above the devices (p < 0.001). CONCLUSION: Periosteal elevation can produce new bone formation with degradable devices, which derives from the periosteum and the underlying bone. In this interaction the periosteum seems to contain the larger share.

Validation of Next-Generation Sequencing of Entire Mitochondrial Genomes and the Diversity of Mitochondrial DNA Mutations in Oral Squamous Cell Carcinoma.

BACKGROUND: Oral squamous cell carcinoma (OSCC) is mainly caused by smoking and alcohol abuse and shows a five-year survival rate of ~50%. We aimed to explore the variation of somatic mitochondrial DNA (mtDNA) mutations in primary oral tumors, recurrences and metastases. METHODS: We performed an in-depth validation of mtDNA next-generation sequencing (NGS) on an Illumina HiSeq 2500 platform for its application to cancer tissues, with the goal to detect low-level heteroplasmies and to avoid artifacts. Therefore we genotyped the mitochondrial genome (16.6 kb) from 85 tissue samples (tumors, recurrences, resection edges, metastases and blood) collected from 28 prospectively recruited OSCC patients applying both Sanger sequencing and high-coverage NGS (~35,000 reads per base). RESULTS: We observed a strong correlation between Sanger sequencing and NGS in estimating the mixture ratio of heteroplasmies (r = 0.99; p<0.001). Non-synonymous heteroplasmic variants were enriched among cancerous tissues. The proportions of somatic and inherited variants in a given gene region were strongly correlated (r = 0.85; p<0.001). Half of the patients shared mutations between benign and cancerous tissue samples. Low level heteroplasmies (<10%) were more frequent in benign samples compared to tumor samples, where heteroplasmies >10% were predominant. Four out of six patients who developed a local tumor recurrence showed mutations in the recurrence that had also been observed in the primary tumor. Three out of five patients, who had tumor metastases in the lymph nodes of their necks, shared mtDNA mutations between primary tumors and lymph node metastases. The percentage of mutation heteroplasmy increased from the primary tumor to lymph node metastases. CONCLUSIONS: We conclude that Sanger sequencing is valid for heteroplasmy quantification for heteroplasmies ≥10% and that NGS is capable of reliably detecting and quantifying heteroplasmies down to the 1%-level. The finding of shared mutations between primary tumors, recurrences and metastasis indicates a clonal origin of malignant cells in oral cancer.

Enhanced osseointegration of endosseous implants by predictable sustained release properties of strontium.

UNLABELLED: Studies have shown that strontium (Sr) incorporated into surfaces may enhance osseointegration. Thus, we suggested that a sustained Sr release from implant surfaces could improve bone healing. This study verifies and further investigates the effect of a novel Ti-Sr-O functionalized implant surface prepared from a magnetron co-sputtering platform with a continuous release of Sr. MATERIALS AND METHODS: Four experimental Ti-Sr-O groups, which differed from each other in Sr contents and pre-wash procedures, were tested. Implants were prepared with a Ti-Sr-O coating by means of magnetron co-sputtering and compared to Grade 4 titanium. Composition, morphology and mechanical stability were analyzed; Sr-release data were gained from in vitro washout experiments. In vivo investigations were carried out in a rat model and analyzed histologically regarding bone-to-implant contact and new bone formation 30 days after implantation. RESULTS: Structural differences were detected between the two basis Ti-Sr-O coatings with 6.7 at.% and 8.9 at.% Sr, respectively. Different release profiles were observed with 8.9 at.% Sr coating exhibiting the highest long-term release of Sr. Median values of new bone formation and bone-to-implant contact was found to be 60.1% and 91.6%, respectively, for the best group compared to 16.6% and 70.6% for the Grade 4 titanium reference. The increase in new bone formation was found to correlate with the amount of Sr released in vitro. CONCLUSION: The results show that sputtered Ti-Sr-O coatings with sustained release of Sr may improve osseointegration, and could thus have impact on practical applications for medical implants.

Management of frontal sinus fractures--treatment decision based on metric dislocation extent.

The treatment of frontal sinus fractures is still a matter of research in neurosurgical and craniofacial surgery. The present study aimed to determine new criteria regarding surgical or observational treatment, especially concerning the fracture dislocation. Clinical information on 164 consecutive patients with fractures of the frontal sinus, treated at the Department of Craniomaxillofacial Surgery of the Medical University of Innsbruck from 2006 to 2010, have been evaluated. 23 female (14%) and 141 male (86%) patients suffered mainly from traffic (31.7%) and sports accidents (28.0%), followed by work accidents (20.1%), violence (3.7%) and accidents at home (3.1%). 51.8% presented an isolated fracture of the anterior wall, 47.6% both anterior and posterior wall fracture, 0.6% an isolated posterior wall fracture. Injury of the nasofrontal duct was found in 29.2%, CSF liquorrhoea in 15.9%. In total, 44.5% of the patients underwent surgical therapy, 55.5% were treated conservatively by observation. Treatment decision depended significantly on concomitant injuries of the nasofrontal duct and the presence of rhinoliquorrhoea as well as on the fracture dislocation. A new classification of frontal sinus fractures depending on their maximum dislocation is proposed. In addition, a treatment algorithm considering displacement, liquorrhoea and injury of the nasofrontal duct is presented.

From bench to application: current practices in tissue engineering and its realisation at maxillofacial units in Germany, Austria and Switzerland.

Over the last 20 years, the highly interdisciplinary field of tissue engineering (TE) has become an established subspecialty in research facilities all over the world. Numerous methods and protocols are available for various research intentions and aims, but there are no data indicating which of these methods and resources are generally used. This study is an overview of the resources and methods that are commonly applied in TE research in general, and in the field of oral and maxillofacial surgery (OMFS) in Germany, Austria and Switzerland. The DÖSAK collaborative group for TE developed a detailed questionnaire and collected information from participating university hospitals in these three countries. We evaluated the availability of research facilities, in vitro realisation and in vivo designs for animal studies in these departments. 11 units who replied, out of 35 we contacted, conducted research on bone regeneration in interdisciplinary research facilities. 10 departments used xenogeneic and alloplastic scaffolds for in vitro and in vivo applications. In this case, the most commonly utilised trademarks were Bio-Oss(®) and CERASORB(®). 9 units used osteoblasts (73%) and 10 proliferation assays in vitro, whereas rats served as the standard animal model for histology/immunohistochemistry in 6. All research units were interested in establishing a platform for research exchange and communication. This study shows that tissue engineering is well established and highly accepted in most participating university hospitals and research facilities. The presented data, together with data published in a foregoing paper will help arrange more readily available standardised procedures for further investigations.

Life-threatening complications of deep neck space infections.

Odontogenic infections represented a challenge for every craniomaxillofacial surgeon in the pre-antibiotic era, not least due to the frequent association with septic complications and lethal consequences. Nowadays, the incidences of serious infection-related complications are less frequent thanks to the medical progress. Nevertheless, the development of severe infections is still hard to foresee. The following analysis provides an overview of four patients with severe, life-threatening odontogenic deep neck space infections treated at the University Clinic for Oral and Maxillofacial Surgery in Innsbruck and describes the etiology, therapy, and outcome for each patient while analyzing differences between the single cases. Crucial aspects in origin, progression, and treatment of DNIs are highlighted, comparing the results with the international literature.

Accelerated bone ingrowth by local delivery of strontium from surface functionalized titanium implants.

Studies have indicated systemic treatment with strontium (Sr) as a potential route to increase bone quality and formation around osseointegrating implants. However, adverse effects are linked to such treatment. In this study we present a surface modification method designed for sustained local release of Sr from implants. The four groups used were prepared by a magnetron co-sputtering process and selected on the basis of Sr release data. The composition, morphology and mechanical stability of the coatings were analyzed and the Sr release profiles were investigated in vitro by washout experiments. Mesenchymal stem cells were cultured on the different coatings to evaluate potential cytotoxic effects and the effect on cellular proliferation. No indication of toxicity was found. A rodent study demonstrated a significant increase in direct bone-to-implant contact and peri-implant bone volume, for several of the groups, four weeks after implantation when compared to a Grade 4 titanium reference group. Median values of bone-to-implant contact and new bone formation was found to be 19% and 53%, respectively, for the best group compared to 0% for both parameters with respect to the Grade 4 titanium reference. The results indicate that this method may have applications within the orthopedic and dental industry.