Synthesis and Structural Characterization of Macrocyclic α-ABpeptoids and Their DNA-Encoded Library.

The first synthesis of macrocyclic α-ABpeptoids with varying lengths is described. X-ray crystal structures reveal that cyclic trimer displays a chair-like conformation with a cct amide sequence and cyclic tetramer has a saddle-like structure with an uncommon cccc amide arrangement. The creation of a DNA-encoded combinatorial library of macrocyclic α-ABpeptoids is described.

Stereoselective three-component cascade synthesis of α-substituted 2,4-dienamides from gem-difluorochloro ethanes.

Herein, we describe a new transition metal-free Claisen rearrangement for the synthesis of α-substituted 2,4-dienamides. The one-pot, stereoselective three-component cascade reaction between a series of propargyl alcohols, amines, and gem-difluorochloro ethane derivatives afforded various polysubstituted 2,4-dienamides in good yields. This synthetic method for 1,1-captodative dienes, α-substituted 2,4-dienamides, can be utilized for preparing pharmaceutical analogues containing an indolin-2-one or lactone moiety.

First-row early transition metal complexes with a highly sterically demanding triisopropylphenyl amino triphenolate ligand: synthesis and applications.

Amino triphenolate ligands have been widely used for the synthesis of various transition metal complexes aiming at various applications such as ring-opening polymerization, olefin polymerization, and sulfoxidation. However, the introduction of highly sterically demanding aromatic substituents, such as triisopropylphenyl (TRIP), to the amino triphenolate ligand has not been previously reported probably due to the synthetic difficulty. In six-step reactions using commercial materials, a highly sterically demanding amino triphenolate ligand was successfully synthesized, and early transition metal complexes (Ti, V, Cr, Mn) supported by the ligand were also obtained and fully characterized. In addition, titanium and chromium complexes were further used for catalytic sulfoxidation, and polymerization of ethylene, respectively.

SuFEx in Metal-Organic Frameworks: Versatile Postsynthetic Modification Tool.

A new type of click reaction, sulfur(VI) fluoride exchange (SuFEx), has been utilized to prepare five postsynthetically modified UiO-67 series metal-organic frameworks (MOFs). The postsynthetic modification (PSM) via SuFEx can be achieved selectively for the sulfonyl fluoride (R-SO2F) without degrading the MOF structure as confirmed by X-ray crystallographic analysis. The present SuFEx method provides a straightforward tool for introducing new functionality inside MOFs. Introduction of an imidazolium group into the MOF afforded a heterogeneous catalyst for the benzoin condensation reaction.

Separation of Acetylene from Carbon Dioxide and Ethylene by a Water-Stable Microporous Metal-Organic Framework with Aligned Imidazolium Groups inside the Channels.

Separation of acetylene from carbon dioxide and ethylene is challenging in view of their similar sizes and physical properties. Metal-organic frameworks (MOFs) in general are strong candidates for these separations owing to the presence of functional pore surfaces that can selectively capture a specific target molecule. Here, we report a novel 3D microporous cationic framework named JCM-1. This structure possesses imidazolium functional groups on the pore surfaces and pyrazolate as a metal binding group, which is well known to form strong metal-to-ligand bonds. The selective sorption of acetylene over carbon dioxide and ethylene in JCM-1 was successfully demonstrated by equilibrium gas adsorption analysis as well as dynamic breakthrough measurement. Furthermore, its excellent hydrolytic stability makes the separation processes highly recyclable without a substantial loss in acetylene uptake capacity.

Thermal decomposition pathways of nitro-functionalized metal-organic frameworks.

The decomposition behavior of high energy metal-organic frameworks (MOFs) with extensive nitration is disclosed. In contrast to the detonation behavior observed in molecular energetic compounds, deflagration transforms cubic MOFs into anisotropic carbon structures with highly dispersed metal. Both the structural metal and intimate mixing are found to be critical.

Introduction of functionality, selection of topology, and enhancement of gas adsorption in multivariate metal-organic framework-177.

Metal-organic framework-177 (MOF-177) is one of the most porous materials whose structure is composed of octahedral Zn4O(-COO)6 and triangular 1,3,5-benzenetribenzoate (BTB) units to make a three-dimensional extended network based on the qom topology. This topology violates a long-standing thesis where highly symmetric building units are expected to yield highly symmetric networks. In the case of octahedron and triangle combinations, MOFs based on pyrite (pyr) and rutile (rtl) nets were expected instead of qom. In this study, we have made 24 MOF-177 structures with different functional groups on the triangular BTB linker, having one or more functionalities. We find that the position of the functional groups on the BTB unit allows the selection for a specific net (qom, pyr, and rtl), and that mixing of functionalities (-H, -NH2, and -C4H4) is an important strategy for the incorporation of a specific functionality (-NO2) into MOF-177 where otherwise incorporation of such functionality would be difficult. Such mixing of functionalities to make multivariate MOF-177 structures leads to enhancement of hydrogen uptake by 25%.

A significant enhancement of water vapour uptake at low pressure by amine-functionalization of UiO-67.

The functionalization of UiO-67 with -NH2 groups enhances CO2 and CH4 adsorption at 1 bar and 298 K and positively influences the framework's interaction with water as evidenced by the significant enhancement of water vapour adsorption at 0.1 < P/P0 < 0.3 and 298 K.

Gas adsorption properties of highly porous metal-organic frameworks containing functionalized naphthalene dicarboxylate linkers.

Three functionalized metal-organic frameworks (MOFs), MOF-205-NH2, MOF-205-NO2, and MOF-205-OBn, formulated as Zn4O(BTB)4/3(L), where BTB is benzene-1,3,5-tribenzoate and L is 1-aminonaphthalene-3,7-dicarboxylate (NDC-NH2), 1-nitronaphthalene-3,7-dicarboxylate (NDC-NO2) or 1,5-dibenzyloxy-2,6-naphthalenedicarboxylate (NDC-(OBn)2), were synthesized and their gas (H2, CO2, or CH4) adsorption properties were compared to those of the un-functionalized, parent MOF-205. Ordered structural models for MOF-205 and its derivatives were built based on the crystal structures and were subsequently used for predicting porosity properties. Although the Brunauer-Emmett-Teller (BET) surface areas of the three MOF-205 derivatives were reduced (MOF-205, 4460; MOF-205-NH2, 4330; MOF-205-NO2, 3980; MOF-205-OBn, 3470 m(2) g(-1)), all three derivatives were shown to have enhanced H2 adsorption capacities at 77 K and CO2 uptakes at 253, 273, and 298 K respectively at 1 bar in comparison with MOF-205. The results indicate the following trend in H2 adsorption: MOF-205 < MOF-205-NO2 < MOF-205-NH2 < MOF-205-OBn. MOF-205-OBn showed good ideal adsorbed solution theory (IAST) selectivity values of 6.5 for CO2/N2 (15/85 in v/v) and 2.7 for CO2/CH4 (50/50 in v/v) at 298 K. Despite the large reduction (-22%) in the surface area, MOF-205-OBn displayed comparable total volumetric CO2 (at 48 bar) and CH4 (at 35 bar) storage capacities with those of MOF-205 at 298 K: MOF-205-OBn, 305 (CO2) and 112 (CH4) cm(3) cm(-3), and for MOF-205, 307 (CO2) and 120 (CH4) cm(3) cm(-3), respectively.

Connection of zinc paddle-wheels in a -type metal-organic framework with 2-methylimidazolate and subsequent incorporation of charged organic guests.

A microporous metal-organic framework (mIm-MOF-14) has doubly interpenetrated anionic frameworks resulting from 2-methylimidazolate linking Zn(ii) paddle-wheels of charge-neutral -type networks, and allows the inclusion of tetramethylammonium ion to exert an enhanced CO2 affinity.

Poly[bis-(µ4-2,3,5,6-tetra-fluoro-benzene-1,4-di-carboxyl-ato-κ(4) O (1):O (1'):O (4):O (4'))bis-(tetra-hydro-furan-κO)dizinc].

The title compound, [Zn2(C8F4O4)2(C4H8O)2] n , has a three-dimensional metal-organic framework structure. The asymmetric unit consists of two Zn(II) atoms, two tetrahydrofuran ligands, one 2,3,5,6-tetra-fluoro-benzene-1,4-di-carboxyl-ate ligand and two half 2,3,5,6-tetra-fluoro-benzene-1,4-di-carboxyl-ate ligands, which are completed by inversion symmetry. One Zn(II) atom has a distorted trigonal-bipyramidal coordination geometry, while the other has a distorted octa-hedral geometry. Two independent tetra-hydro-furan ligands are each disordered over two sets of sites with occupancy ratios of 0.48 (4):0.52 (4) and 0.469 (17):0.531 (17).

Poly[bis-(ethanol)(µ4-2,3,5,6-tetra-fluoro-benzene-1,4-di-carboxyl-ato)cadmium].

In the title compound, [Cd(C8F4O4)(C2H5OH)2] n , the Cd(II) cation sits on an inversion centre and is coordinated by six O atoms from four tetra-fluoro-benzene-1,4-di-carboxyl-ate anions and two ethanol mol-ecules in a distorted octa-hedral geometry. The anionic ligand is also located on an inversion centre, and connects four Cd(II) cations, generating a two-dimensional polymeric layer parallel to the ab plane. Within the layer, the ethanol mol-ecule links F and O atoms of the nearest anionic ligands via O-H⋯O and O-H⋯F hydrogen bonds. The ethyl group of the ethanol mol-ecule is disordered over two positions with an occupancy ratio of 0.567 (10):0.433 (10).

Isoreticular expansion of metal-organic frameworks with triangular and square building units and the lowest calculated density for porous crystals.

The concept and occurrence of isoreticular (same topology) series of metal-organic frameworks (MOFs) is reviewed. We describe the preparation, characterization, and crystal structures of three new MOFs that are isoreticular expansions of known materials with the tbo (Cu(3)(4,4',4''-(benzene-1,3,5-triyl-tris(benzene-4,1-diyl))tribenzoate)(2), MOF-399) and pto topologies (Cu(3)(4,4',4''-(benzene-1,3,5-triyl-tribenzoate)(2), MOF-143; Cu(3)(4,4',4''-(triazine-2,4,6-triyl-tris(benzene-4,1-diyl))tribenzoate)(2), MOF-388). One of these materials (MOF-399) has a unit cell volume 17 times larger than that of the first reported material isoreticular to it, and has the highest porosity (94%) and lowest density (0.126 g cm(-3)) of any MOFs reported to date.

Ultrahigh porosity in metal-organic frameworks.

Crystalline solids with extended non-interpenetrating three-dimensional crystal structures were synthesized that support well-defined pores with internal diameters of up to 48 angstroms. The Zn4O(CO2)6 unit was joined with either one or two kinds of organic link, 4,4',4''-[benzene-1,3,5-triyl-tris(ethyne-2,1-diyl)]tribenzoate (BTE), 4,4',44''-[benzene-1,3,5-triyl-tris(benzene-4,1-diyl)]tribenzoate (BBC), 4,4',44''-benzene-1,3,5-triyl-tribenzoate (BTB)/2,6-naphthalenedicarboxylate (NDC), and BTE/biphenyl-4,4'-dicarboxylate (BPDC), to give four metal-organic frameworks (MOFs), MOF-180, -200, -205, and -210, respectively. Members of this series of MOFs show exceptional porosities and gas (hydrogen, methane, and carbon dioxide) uptake capacities. For example, MOF-210 has Brunauer-Emmett-Teller and Langmuir surface areas of 6240 and 10,400 square meters per gram, respectively, and a total carbon dioxide storage capacity of 2870 milligrams per gram. The volume-specific internal surface area of MOF-210 (2060 square meters per cubic centimeter) is equivalent to the outer surface of nanoparticles (3-nanometer cubes) and near the ultimate adsorption limit for solid materials.