RESUMEN
On the human face, the lips are one of the most important anatomical elements, both morphologically and functionally. Morphologically, they have a significant impact on aesthetics, and abnormal lip morphology causes sociopsychological problems. Functionally, they play a crucial role in breathing, articulation, feeding, and swallowing. An apparatus that can accurately and easily measure the elastic modulus of perioral tissues in clinical tests was developed, and its measurement sensitivity was evaluated. The apparatus is basically a uniaxial compression apparatus consisting of a force sensor and a displacement sensor. The displacement sensor works by enhancing the restoring force due to the deformation of soft materials. Using the apparatus, the force and the displacement were measured for polyurethane elastomers with various levels of softness, which are a model material of human tissues. The stress measured by the developed apparatus increased in proportion to Young's modulus, and was measured by the compression apparatus at the whole region of Young's modulus, indicating that the relation can be used for calibration. Clinical tests using the developed apparatus revealed that Young's moduli for upper lip, left cheek, and right cheek were evaluated to be 45, 4.0, and 9.9 kPa, respectively. In this paper, the advantages of this apparatus and the interpretation of the data obtained are discussed from the perspective of orthodontics.
RESUMEN
The Planning and Acting Network for Low Dose Radiation Research in Japan (PLANET) was established in 2017 in response to the need for an all-Japan network of experts. It serves as an academic platform to propose strategies and facilitate collaboration to improve quantitative estimation of health risks from ionizing radiation at low-doses and low-dose-rates. PLANET established Working Group 1 (Dose-Rate Effects in Animal Experiments) to consolidate findings from animal experiments on dose-rate effects in carcinogenesis. Considering international trends in this field as well as the situation in Japan, PLANET updated its priority research areas for Japanese low-dose radiation research in 2023 to include (i) characterization of low-dose and low-dose-rate radiation risk, (ii) factors to be considered for individualization of radiation risk, (iii) biological mechanisms of low-dose and low-dose-rate radiation effects and (iv) integration of epidemiology and biology. In this context, PLANET established Working Group 2 (Dose and Dose-Rate Mapping for Radiation Risk Studies) to identify the range of doses and dose rates at which observable effects on different endpoints have been reported; Working Group 3 (Species- and Organ-Specific Dose-Rate Effects) to consider the relevance of stem cell dynamics in radiation carcinogenesis of different species and organs; and Working Group 4 (Research Mapping for Radiation-Related Carcinogenesis) to sort out relevant studies, including those on non-mutagenic effects, and to identify priority research areas. These PLANET activities will be used to improve the risk assessment and to contribute to the revision of the next main recommendations of the International Commission on Radiological Protection.
RESUMEN
The effects of mean normal stress on the deformation properties such as the strain-hardening, strain-induced martensite transformation, and micro-void initiation behaviors of low-carbon ultrahigh-strength TRIP-aided bainitic ferrite (TBF), bainitic ferrite/martensite (TBM), and martensite (TM) steels were investigated to evaluate the various cold formabilities. In addition, the deformation properties were related to the microstructural properties such as the matrix structure, retained austenite characteristics, and second-phase properties. Positive mean normal stress considerably promoted strain-induced martensite transformation and micro-void initiation, with an increased strain-hardening rate in an early strain range in all steels. In TM steel, the primary martensite matrix structure suppressed the micro-void initiation through high uniformity of a primary martensite matrix structure and a low strength ratio, although the strain-induced transformation was promoted, and a large amount of martensite/austenite constituent or phase was contained. A mixed matrix structure of bainitic ferrite/primary martensite in TBM steel also suppressed the micro-void initiation because of the refined microstructure and relatively stable retained austenite. Promoted micro-void initiation of TBF steel was mainly promoted by a high strength ratio.
RESUMEN
DNA damage is induced by both endogenous and exogenous factors. Repair of DNA double-strand break (DSB), a serious damage that threatens genome stability, decreases with senescence. However, the molecular mechanisms underlying the decline in DNA repair capacity during senescence remain unclear. We performed immunofluorescence staining for phosphorylated histone H2AX (γ-H2AX) in normal human fetal lung fibroblasts and human skin fibroblasts of different ages after chronic irradiation (total dose, 1 Gy; dose rate, 1 Gy/day) to investigate the effect of cellular senescence and organismal aging on DSB repair. Accumulation of DSBs was observed with cellular senescence and organismal aging, probably caused by delayed DSB repair. Importantly, the formation of γ-H2AX foci, an early event in DSB repair, is delayed with cellular senescence and organismal aging. These results suggest that the delay in γ-H2AX focus formation might delay the overall DSB repair. Interestingly, immediate γ-H2AX foci formation was suppressed in cells with senescence-associated heterochromatin foci (SAHF). To investigate the relationship between the γ-H2AX focus formation and SAHF, we used LiCl to relax the SAHFs, followed by irradiation. We demonstrated that LiCl rescued the delayed γ-H2AX foci formation associated with cellular senescence. This indicates that SAHF interferes with γ-H2AX focus formation and inhibits DSB repair in radiation-induced DSB. Our results suggest that therapeutic targeting of SAHFs have potential to resolve DSB repair dysfunction associated with cellular senescence.
Asunto(s)
Histonas , Exposición a la Radiación , Humanos , Histonas/metabolismo , Heterocromatina , Reparación del ADN , Daño del ADNRESUMEN
Polyglycerol fatty acid esters (PGFEs) are common food additives. PGFE-based formulations exhibit high structural stability, however, the stability mechanism of the micellar structures has not been yet elucidated. In this study, nanostructural analysis was performed using small-angle neutron and X-ray scattering (SANS and SAXS) measurements to reveal the mechanism of the structural stability of PGFE-coenzyme Q10 (CoQ10) mixtures as a CoQ10 formulation. Pure PGFE formed multilamellar vesicles, whereas PGFE-CoQ10 formed spherical micelles. Furthermore, when the amount of added water increased, the PGFE-CoQ10 micellar size and the amount of water in the micelles remained unchanged. A model-fitting analysis of the SANS results suggested that the CoQ10 molecules were introduced between the surfactants, forming a palisade-type structure. The high structural stability of the PGFE-CoQ10 micelles was attributed to two factors: proper spreading of the hydrophilic head chains and inhibition of the change of the amount of water inside the micelles by the PGFE heads and quinone ring of CoQ10. This indicates that PGFE-CoQ10 can function in water while maintaining the micellar structure formed in the storage solution. The findings of this study are important for the safety and nano-hazard aspects of PGFE-CoQ10 formulations.
Asunto(s)
Ácidos Grasos , Micelas , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Ácidos Grasos/química , Ésteres/química , AguaRESUMEN
The mechanical properties for paper sheets composited with glucose (Glc), methyl cellulose (MC), and carboxymethyl cellulose (CMC) were investigated. The paper composites were prepared by immersing paper sheets in aqueous solutions of these materials and drying at 100 °C for 30 min. The stress-strain curves for these paper composites were measured by a uniaxial tensile apparatus with a stretching speed of 2 mm/min. The breaking stress and strain for untreated paper were 24 MPa and 0.016, respectively. The paper composites demonstrated stress-strain curves similar to the untreated paper; however, the breaking point largely differed for these composites. The breaking strain and breaking stress for the Glc composite slightly decreased and those for the MC composite gradually increased with the concentration of materials composited. Significant increases in the mechanical properties were observed for the CMC composite. The breaking stress, breaking strain, and breaking energy for the 3 wt.% CMC composite were 2.0-, 3.9-, and 8.0-fold higher than those for untreated paper, respectively. SEM photographs indicated that the CMC penetrated into the inner part of the paper. These results strongly suggest that the mechanical improvement for CMC composites can be understood as an enhancement of the bond strength between the paper fibrils by CMC, which acts as a bonding agent. It was also revealed that the breaking strain, breaking stress, and breaking energy for the CMC composites were at maximum at the first cycle and decreased gradually as the immersion cycles increased.