RESUMEN
Previously, we biosynthesized an evolved version of a bio-based polylactide (PLA) on microbial platforms using our engineered lactate-polymerizing enzyme (LPE). This lactate (LA)-based copolyester, LAHB, has advantages over PLA, including improved flexibility and biodegradability, and its properties can be regulated through the LA fraction. To expand the LA-incorporation capacity and improve polymer properties, in the state of in vivo LAHB production, propionyl-CoA transferases (PCTs) that exhibited enhanced production of LA-CoA than the conventional PCTs were selected. Here, the present study has demonstrated that the LA fraction of LAHB could be altered using various PCTs. Enhanced PCT performance was achieved by balancing polymer production and cell growth. Both events are governed by the use of acetyl-CoA, a commonly shared key metabolite. This could be attributed to the different reactivities of individual PCTs towards acetyl-CoA, which serves both as a CoA donor and a leading compound in the TCA cycle. Interestingly, we found complete sequence randomness in the LAHB copolymers, independent of the LA fraction. The mechanism of LA fraction-independent sequence randomness is discussed. This new PCT-based strategy synergistically combines with the evolution of LPE to advance the LAHB project, and enables us to perform advanced applications other than LAHB production utilizing CoA-linked substrates.
Asunto(s)
Coenzima A Transferasas , Ácido Láctico , Ácido Láctico/química , Coenzima A Transferasas/metabolismo , Coenzima A Transferasas/genética , Coenzima A Transferasas/química , Poliésteres/química , Acilcoenzima A/metabolismo , Acilcoenzima A/química , Polímeros/química , Acetilcoenzima A/metabolismo , Acetilcoenzima A/químicaRESUMEN
This study investigated the effect of polymer blending of microbially produced poly[(R)-lactate-co-(R)-3-hydroxybutyrate] copolymers (LAHB) with poly(lactate) (PLA) on their mechanical, thermal, and biodegradable properties. Blending of high lactate (LA) content and high molecular weight LAHB significantly improved the tensile elongation of PLA up to more than 250 % at optimal LAHB composition of 20-30 wt%. Temperature-modulated differential scanning calorimetry and dynamic mechanical analysis revealed that PLA and LAHB were immiscible but interacted with each other, as indicated by the mutual plasticization effect. Detailed morphological characterization using scanning probe microscopy, small-angle X-ray scattering, and solid-state NMR confirmed that PLA and LAHB formed a two-phase structure with a characteristic length scale as small as 20 nm. Because of mixing in this order, the polymer blends were optically transparent. The biological oxygen demand test of the polymer blends in seawater indicated an enhancement of PLA biodegradation during biodegradation of the polymer blends.
Asunto(s)
Poliésteres , Poliésteres/química , Poliésteres/metabolismo , Polímeros/química , Polímeros/metabolismo , Hidroxibutiratos/química , Hidroxibutiratos/metabolismo , Temperatura , Peso Molecular , Biodegradación AmbientalRESUMEN
Escherichia coli is a useful platform for producing valuable materials through the implementation of synthetic gene(s) derived from other organisms. The production of lactate (LA)-based polyester poly[LA-co-3-hydroxybutyrate (3HB)] was carried out in E. coli using a set of five other species-derived genes: Pseudomonas sp. 61-3-derived phaC1STQK (for polymerization), Cupriavidus necator-derived phaAB (for 3HB-CoA generation), and Megasphaera elsdenii-derived pct (for LA-CoA generation) cloned into pTV118NpctphaC1ps(ST/QK)AB. Here, we aimed to optimize the expression level and timing of these genes to improve the production of P(LA-co-3HB) and to manipulate the LA fraction by replacing the promoters with various promoters in E. coli. Evaluation of the effects of 21 promoter replacement plasmids revealed that the phaC1STQK-AB operon is critical for the stationary phase for P(LA-co-3HB) production. Interestingly, the effects of the promoters depended on the composition of the medium. In glucose-supplemented LB medium, the dps promoter replacement plasmid resulted in the greatest effect, increasing the accumulation to 8.8 g/L and an LA fraction of 14.1 mol% of P(LA-co-3HB), compared to 2.7 g/L and 8.1 mol% with the original plasmid. In xylose-supplemented LB medium, the yliH promoter replacement plasmid resulted in the greatest effect, with production of 5.6 g/L and an LA fraction of 40.2 mol% compared to 3.6 g/L and 22.6 mol% with the original plasmid. These results suggest that the selection of an appropriate promoter for expression of the phaC1STQK-AB operon could improve the production and LA fraction of P(LA-co-3HB). Here, we propose that the selection of cell-growth phase-dependent promoters is a versatile biotechnological strategy for effective intracellular production of polymeric materials such as P(LA-co-3HB), in combination with the selection of sugar-based carbon sources.
Asunto(s)
Escherichia coli , Ácido Láctico , Escherichia coli/genética , Escherichia coli/metabolismo , Poliésteres/metabolismo , Hidroxibutiratos/metabolismoRESUMEN
The assembly of discrete active species to form periodical nanostructures is essential in realizing low-cost artificial enzymes that mimic natural enzymatic functions in extraordinary bio(chemo)selective reactions. In this study, we developed artificial bifunctional glucose/gluconic acid dehydrogenase from naturally abundant resources: l-aspartic acid (Asp) and montmorillonite (a subgroup of smectite natural clay minerals). ß-d-Glucose (Glc) was dehydrogenated to 2-keto-d-gluconate (2-KGA) at 25 and 30 °C in an aqueous acidic solution (pH = 3, 4, and 5). The reaction involved sequential steps that yielded d-gluconic acid (GA) as an intermediate. The second step of the dehydrogenation (GA to 2-KGA) occurred at a higher rate than the first (Glc to GA), which is comparable to the natural process. A negatively charged carboxylate in Asp was required for the dehydrogenation, which donates an electron pair (COO:-) to the hydroxyl group bonded to the C(1)-position of Glc. The acidic sites in clay served as coenzymatic sites (electron acceptor), promoting the Glc dehydrogenation as the Glc reduced by Asp approached the clay coenzymatic sites. The active coenzymatic structures were developed in 48 h (induction period) through the rearrangement of the adsorbed Asp and Glc molecules on montmorillonite in water (intermediate structure). The spontaneous assembling of the intermediate structures facilitated the one-pot dehydrogenation of Glc to 2-KGA via periodic "hydrated stacked layers" comprising clay nanosheets, Asp, and Glc. The facile synthetic route proposed here is inexpensive and would be beneficial without using both GDH and GADH enzymes bound to a cell membrane.
Asunto(s)
Aminoácidos , Glucosa , Aceleración , Bentonita , Arcilla , Gluconatos , Glucosa/metabolismo , AguaRESUMEN
Membrane vesicles (MVs) are formed in various microorganisms triggered by physiological and environmental phenomena. In this study, we have discovered that the biogenesis of MV took place in the recombinant cell of Escherichia coli BW25113 strain that intracellularly accumulates microbial polyester, polyhydroxybutyrate (PHB). This discovery was achieved as a trigger of foam formation during the microbial PHB fermentation. The purified MVs were existed as a mixture of outer MVs and outer/inner MVs, revealed by transmission electron microscopy. It should be noted that there was a good correlation between MV formation and PHB production level that can be finely controlled by varying glucose concentrations, suggesting the causal relationship in both supramolecules artificially produced in the microbial platform. Notably, the controllable secretion of MV was governed spatiotemporally through the morphological change of the E. coli cells caused by the PHB intracellular accumulation. Based on a hypothesis of PHB internal-pressure dependent envelope-disorder induced MV biogenesis, here we propose a new Polymer Intracellular Accumulation-triggered system for MV Production (designated "PIA-MVP") with presenting a mechanistic model for MV biogenesis. The PIA-MVP is a promising microbial platform that will provides us with a significance for further study focusing on biopolymer capsulation and cross-membrane transportation for different application purposes.
Asunto(s)
Escherichia coli , Polímeros , Escherichia coli/metabolismo , Fermentación , Hidroxibutiratos , Microscopía Electrónica de Transmisión , Poliésteres/metabolismoRESUMEN
The genus Pestalotiopsis are endophytic fungi that have recently been identified as cellulolytic system producers. We herein cloned a gene coding for a xylanase belonging to glycoside hydrolase (GH) family 10 (PesXyn10A) from Pestalotiopsis sp. AN-7, which was isolated from the soil of a mangrove forest. This protein was heterologously expressed by Pichia pastoris as a host, and its enzymatic properties were characterized. PesXyn10A was produced as a glycosylated protein and coincident to theoretical molecular weight (35.3 kDa) after deglycosylation by peptide-NfF-glycosidase F. Purified recombinant PesXyn10A exhibited maximal activity at pH 6.0 and 50 °C, and activity was maintained at 90 % at pH 5.0 and temperatures lower than 30 °C for 24 h. The substrate specificity of PesXyn10A was limited and it hydrolyzed glucuronoxylan and arabinoxylan, but not ß-glucan. The final hydrolysis products from birchwood xylan were xylose, xylobiose, and 1,23-α-D-(4-O-methyl-glucuronyl)-1,4-ß-D-xylotriose. The addition of metallic salts (NaCl, KCl, MgCl2, and CaCl2) activated PesXyn10A for xylan degradation, and maximal activation by these divalent cations was approximately 160 % at a concentration of 5 mM. The thermostability of PesXyn10A significantly increased in the presence of 50 mM NaCl or 5 mM MgCl2. The present results suggest that the presence of metallic salts at a low concentration, similar to brackish water, exerts positive effects on the enzyme activity and thermal stability of PesXyn10A.
RESUMEN
The carbohydrate esterase family 1 (CE1) in CAZy contains acetylxylan esterases (AXEs) and feruloyl esterases (FAEs). Here we cloned a gene coding for an AXE belonging to CE1 from Irpex lacteus (IlAXE1). IlAXE1 was heterologously expressed in Pichia pastoris, and the recombinant enzyme was purified and characterized. IlAXE1 hydrolyzed p-nitrophenyl acetate, α-naphthyl acetate and 4-methylumbelliferyl acetate, however, it did not show any activity on ethyl ferulate and methyl p-coumarate. We also examined the activity on partially acetylated and feruloylated xylan extracted from corncob by hydrothermal reaction. Similarly, ferulic and p-coumaric acids were not liberated, and acetic acid was only detected in the reaction mixture. The results indicated that IlAXE1 is an acetylxylan esterase actually reacted to acetyl xylan. However, since IlAXE1 was unable to completely release acetic acid esterifying xylopyranosyl residues, it is assumed that acetyl groups exhibiting resistance to deacetylation by IlAXE1 are present in corn cob xylan.