Remanufacturing Perovskite Solar Cells and Modules-A Holistic Case Study.

While perovskite photovoltaic (PV) devices are on the verge of commercialization, promising methods to recycle or remanufacture fully encapsulated perovskite solar cells (PSCs) and modules are still missing. Through a detailed life-cycle assessment shown in this work, we identify that the majority of the greenhouse gas emissions can be reduced by re-using the glass substrate and parts of the PV cells. Based on these analytical findings, we develop a novel thermally assisted mechanochemical approach to remove the encapsulants, the electrode, and the perovskite absorber, allowing reuse of most of the device constituents for remanufacturing PSCs, which recovered nearly 90% of their initial performance. Notably, this is the first experimental demonstration of remanufacturing PSCs with an encapsulant and an edge-seal, which are necessary for commercial perovskite solar modules. This approach distinguishes itself from the "traditional" recycling methods previously demonstrated in perovskite literature by allowing direct reuse of bulk materials with high environmental impact. Thus, such a remanufacturing strategy becomes even more favorable than recycling, and it allows us to save up to 33% of the module's global warming potential. Remarkably, this process most likely can be universally applied to other PSC architectures, particularly n-i-p-based architectures that rely on inorganic metal oxide layers deposited on glass substrates. Finally, we demonstrate that the CO2-footprint of these remanufactured devices can become less than 30 g/kWh, which is the value for state-of-the-art c-Si PV modules, and can even reach 15 g/kWh assuming a similar lifetime.

A universal ligand for lead coordination and tailored crystal growth in perovskite solar cells.

Chemical environment and precursor-coordinating molecular interactions within a perovskite precursor solution can lead to important implications in structural defects and crystallization kinetics of a perovskite film. Thus, the opto-electronic quality of such films can be boosted by carefully fine-tuning the coordination chemistry of perovskite precursors via controllable introduction of additives, capable of forming intermediate complexes. In this work, we employed a new type of ligand, namely 1-phenylguanidine (PGua), which coordinates strongly with the PbI2 complexes in the perovskite precursor, forming new intermediate species. These strong interactions effectively retard the perovskite crystallization process and form homogeneous films with enlarged grain sizes and reduced density of defects. In combination with an interfacial treatment, the resulted champion devices exhibit a 24.6% efficiency with outstanding operational stability. Unprecedently, PGua can be applied in various PSCs with different perovskite compositions and even in both configurations: n-i-p and p-i-n, highlighting the universality of this ligand.

Surface Modification of ITO with N-Heterocyclic Carbene Precursors Results in Electron Selective Contacts in Organic Photovoltaic Devices.

Surface modification of indium tin oxide (ITO) electrodes with organic molecules is known to tune their work function which results in higher charge carrier selectivity in corresponding organic electronic devices and hence influences the performance of organic solar cells. In recent years, N-heterocyclic carbenes (NHCs) have also been proven to be capable to modify the work function of metals and semimetals compared to the unfunctionalized surface via the formation of strong covalent bonds. In this report, we have designed and performed the modification of the ITO surface with NHC by using the zwitterionic bench stable IPr-CO2 as the NHC precursor, applied via spin coating. Upon modification, the work function of ITO electrodes was reduced significantly which resulted in electron selective contacts in corresponding organic photovoltaic devices. In addition, various characterization techniques and analytical methods are used to elucidate the nature of the bound species and the corresponding binding mechanism of the material to the ITO surface.

Nanoarchitectonics in fully printed perovskite solar cells with carbon-based electrodes.

A sacrificial film of polystyrene nanoparticles was utilized to introduce nano-cavities into mesoporous metal oxide layers. This enabled the growth of larger perovskite crystals inside the oxide scaffold with significantly suppressed non-radiative recombination and improved device performance. This work exemplifies potential applications of such nanoarchitectonic approaches in perovskite opto-electronic devices.

Ordering of PCDTBT revealed by time-resolved electron paramagnetic resonance spectroscopy of its triplet excitons.

Time-resolved electron paramagnetic resonance (TREPR) spectroscopy is shown to be a powerful tool to characterize triplet excitons of conjugated polymers. The resulting spectra are highly sensitive to the orientation of the molecule. In thin films cast on PET film, the molecules' orientation with respect to the surface plane can be determined, providing access to sample morphology on a microscopic scale. Surprisingly, the conjugated polymer investigated here, a promising material for organic photovoltaics, exhibits ordering even in bulk samples. Orientation effects may significantly influence the efficiency of solar cells, thus rendering proper control of sample morphology highly important.

Heterologous production, isolation, characterization and crystallization of a soluble fragment of the NADH:ubiquinone oxidoreductase (complex I) from Aquifex aeolicus.

The proton-pumping NADH:ubiquinone oxidoreductase (complex I) is the first enzyme complex of the respiratory chains in many bacteria and most eukaryotes. It is the least understood of all, due to its enormous size and unique energy conversion mechanism. The bacterial complex is in general made up of 14 different subunits named NuoA-N. Subunits NuoE, -F, and -G comprise the electron input part of the complex. We have cloned these genes from the hyperthermophilic bacterium Aquifex aeolicus and expressed them heterologously in Escherichia coli. A soluble subcomplex made up of NuoE and NuoF and containing the NADH binding site, the primary electron acceptor flavin mononucleotide (FMN), the binuclear iron-sulfur cluster N1a, and the tetranuclear iron-sulfur cluster N3 was isolated by chromatographic methods. The proteins were identified by N-terminal sequencing and mass spectrometry; the cofactors were characterized by UV/vis and EPR spectroscopy. Subunit NuoG was not produced in this strain. The preparation was thermostable and exhibited maximum NADH/ferricyanide oxidoreductase activity at 85 degrees C. Analytical size-exclusion chromatography and dynamic light scattering revealed the homogeneity of the preparation. First attempts to crystallize the preparation led to crystals diffracting more than 2 A.

Nucleotide-induced conformational changes in the Escherichia coli NADH:ubiquinone oxidoreductase (complex I).

The energy-converting NADH:ubiquinone oxidoreductase, also known as respiratory complex I, couples the transfer of electrons from NADH to ubiquinone with the translocation of protons across the membrane. Electron microscopy revealed the two-part structure of the complex consisting of a peripheral and a membrane arm. The peripheral arm contains all known cofactors and the NADH-binding site, whereas the membrane arm has to be involved in proton translocation. Owing to this, a conformation-linked mechanism for redox-driven proton translocation is discussed. By means of electron microscopy, we show that both arms of the Escherichia coli complex I are widened after the addition of NADH but not of NADPH. NADH-induced conformational changes were also detected in solution: ATR-FTIR (attenuated total reflection Fourier-transform infrared) of the soluble NADH dehydrogenase fragment of the complex indicates protein re-arrangements induced by the addition of NADH. EPR spectroscopy of surface mutants of the complex containing a covalently bound spin label at distinct positions demonstrates NADH-dependent conformational changes in both arms of the complex.

Assembly of the Escherichia coli NADH:ubiquinone oxidoreductase (complex I).

The proton-pumping NADH:ubiquinone oxidoreductase is the first of the respiratory chain complexes in many bacteria and the mitochondria of most eukaryotes. In general, the bacterial complex consists of 14 different subunits. In addition to the homologues of these subunits, the mitochondrial complex contains approximately 31 additional proteins. While it was shown that the mitochondrial complex is assembled from distinct intermediates, nothing is known about the assembly of the bacterial complex. We used Escherichia coli mutants, in which the nuo-genes coding the subunits of complex I were individually disrupted by an insertion of a resistance cartridge to determine whether they are required for the assembly of a functional complex I. No complex I-mediated enzyme activity was detectable in the mutant membranes and it was not possible to extract a structurally intact complex I from the mutant membranes. However, the subunits and the cofactors of the soluble NADH dehydrogenase fragment of the complex were detected in the cytoplasm of some of the nuo-mutants. It is discussed whether this fragment represents an assembly intermediate. In addition, a membrane-bound fragment exhibiting NADH/ferricyanide oxidoreductase activity and containing the iron-sulfur cluster N2 was detected in one mutant.