Remote temperature sensing in microelectronics: optical thermometry using dual-center phosphors.

Remote thermal sensing has emerged as a temperature detection technique for tasks in which standard contact thermometers cannot be used due to environment or dimension limitations. One of such challenging tasks is the measurement of temperature in microelectronics. Here, optical thermometry using co-doped and mixed dual-center Gd2O3:Tb3+/Eu3+samples were realized. Ratiometric approach based on monitoring emission intensities of Tb3+(5D4-7F5) and Eu3+(5D0-7F2) transition provided sensing in the range of 30 °C-80 °C. Dispersion system type only slightly affected relative sensitivity, accuracy and precision. The applicability of phosphors synthesized to be utilized as remote optical thermometers for microelectronics has been proved with an example on a surface mount resistor and microcontroller.

Microcrystalline Luminescent (Eu1-xLnx)2bdc3·nH2O (Ln = La, Gd, Lu) Antenna MOFs: Effect of Dopant Content on Structure, Particle Morphology, and Luminescent Properties.

In this work, three series of micro-sized heterometallic europium-containing terephthalate MOFs, (Eu1-xLnx)2bdc3·nH2O (Ln = La, Gd, Lu), are synthesized via an ultrasound-assisted method in an aqueous medium. La3+ and Gd3+-doped terephthalates are isostructural to Eu2bdc3·4H2O. Lu3+-doped compounds are isostructural to Eu2bdc3·4H2O with Lu contents lower than 95 at.%. The compounds that are isostructural to Lu2bdc3·2.5H2O are formed at higher Lu3+ concentrations for the (Eu1-xLux)2bdc3·nH2O series. All materials consist of micrometer-sized particles. The particle shape is determined by the crystalline phase. All the synthesized samples demonstrate an "antenna" effect: a bright-red emission corresponding to the 5D0-7FJ transitions of Eu3+ ions is observed upon 310 nm excitation into the singlet electronic excited state of terephthalate ions. The fine structure of the emission spectra is determined by the crystalline phase due to the different local symmetries of the Eu3+ ions in the different kinds of crystalline structures. The photoluminescence quantum yield and 5D0 excited state lifetime of Eu3+ are equal to 11 ± 2% and 0.44 ± 0.01 ms, respectively, for the Ln2bdc3·4H2O structures. For the (Eu1-xLux)2bdc3·2.5H2O compounds, significant increases in the photoluminescence quantum yield and 5D0 excited state lifetime of Eu3+ are observed, reaching 23% and 1.62 ms, respectively.

Nanoscale Cathodoluminescence Thermometry with a Lanthanide-Doped Heavy-Metal Oxide in Transmission Electron Microscopy.

When navigated by the available energy of a system, often provided in the form of heat, physical processes or chemical reactions fleet on a free-energy landscape, thus changing the structure. In in situ transmission electron microscopy (TEM), where material structures are measured and manipulated inside the microscope while being subjected to external stimuli such as electrical fields, laser irradiation, or mechanical stress, it is necessary to precisely determine the local temperature of the specimen to provide a comprehensive understanding of material behavior and to establish the relationship among energy, structure, and properties at the nanoscale. Here, we propose using cathodoluminescence (CL) spectroscopy in TEM for in situ measurement of the local temperature. Gadolinium oxide particles doped with emissive europium ions present an opportunity to utilize them as a temperature probe in CL measurements via a ratiometric approach. We show the thermometric performance of the probe and demonstrate a precision of ±5 K in the temperature range from 113 to 323 K with the spatial resolution limited by the size of the particles, which surpasses other methods for temperature determination. With the CL-based thermometry, we further demonstrate measuring local temperature under laser irradiation.

Design of luminescent complexes with different Cu4I4 cores based on pyridyl phenoxarsines.

A series of luminescent Cu4I4 clusters with stair-step, cubane, and octahedral geometries supported by a novel type of cyclic As,N-ligand, pyridyl-containing 10-phenoxarsines, were synthesized and characterized by NMR spectroscopy, mass spectrometry, elemental analysis, and single-crystal X-ray diffraction analysis. An unusual arrangement of As,N-bidentate and µ2-iodo ligands was found in the octahedral cluster. The structural diversity of the Cu(I) complexes is reflected in their photophysical properties: the phosphorescence spectra of the compounds display emission in a broad spectral range of 495-597 nm. The complex with the Cu4I4L2 stoichiometry bearing a stair-step Cu4I4 core demonstrates temperature-dependent dual emission. The luminescence properties of all complexes were rationalized by DFT calculations.

Linkage of the Dinuclear Gold(I) Complex Luminescence and Origin of Endocyclic Amino Group of Cyclic P2N2-Bridging Ligands.

Gold(I) complexes of LAu2Cl2 composition based on P2N2 ligands, namely 1,5-diaza-3,7-diphosphacyclooctanes, containing ethylpyridyl substituents at the phosphorus atoms and sp2- or sp3-hybridized endocyclic nitrogen atoms were synthesized. The SCXRD analysis indicated the strong impact of the geometry of the nitrogen atom on the structure and conformational flexibility of the complexes. The N-aryl substituted ligand with the planar endocyclic nitrogen atom provides higher flexibility of the complex and an ability to bind the solvent molecules in the "host-guest" mode, whereas that kind of behavior is forbidden for the complex with an N-alkyl substituted ligand with a pyramidal nitrogen atom. The substituents at nitrogen atoms also control the origin of the emission, which is phosphorescence for the N-aryl substituted complex and fluorescence for the N-alkylaryl substituted complex. The phosphorescent gold(I) complex displays high cytotoxicity without selectivity toward the m-HeLa and normal cells, but the core-shell nanoparticles formed on the base of the complex demonstrate reduced cytotoxicity. The luminescence of the NPs allows tracking the complexes in the cell samples.

Development of Fluorescent Isocoumarin-Fused Oxacyclononyne - 1,2,3-Triazole Pairs.

Fluorescent isocoumarin-fused cycloalkynes, which are reactive in SPAAC and give fluorescent triazoles regardless of the azide nature, have been developed. The key structural feature that converts the non-fluorescent cycloalkyne/triazole pair to its fluorescent counterpart is the pi-acceptor group (COOMe, CN) at the C6 position of the isocoumarin ring. The design of the fluorescent cycloalkyne/triazole pairs is based on the theoretical study of the S1 state deactivation mechanism of the non-fluorescent isocoumarin-fused cycloalkyne IC9O using multi-configurational ab initio and DFT methodologies. The calculations revealed that deactivation proceeds through the electrocyclic ring opening of the α-pyrone cycle and is accompanied by a redistribution of electron density in the fused benzene ring. We proposed that the S1 excited state deactivation barrier could be increased by introducing a pi-acceptor group into a position that is in direct conjugation with the formed C=O group and has a reduced electron density in the transition state. As a proof of concept, we designed and synthesized two fluorescent isocoumarin-fused cycloalkynes IC9O-COOMe and IC9O-CN bearing pi-acceptors at the C6 position. The importance of the nature of a pi-acceptor group was shown by the example of much less fluorescent CF3 -substituted cycloalkyne IC9O-CF3 .

3D Nanocomposite with High Aspect Ratio Based on Polyaniline Decorated with Silver NPs: Synthesis and Application as Electrochemical Glucose Sensor.

In this paper, we present a new methodology for creating 3D ordered porous nanocomposites based on anodic aluminum oxide template with polyaniline (PANI) and silver NPs. The approach includes in situ synthesis of polyaniline on templates of anodic aluminum oxide nanomembranes and laser-induced deposition (LID) of Ag NPs directly on the pore walls. The proposed method allows for the formation of structures with a high aspect ratio of the pores, topological ordering and uniformity of properties throughout the sample, and a high specific surface area. For the developed structures, we demonstrated their effectiveness as non-enzymatic electrochemical sensors on glucose in a concentration range crucial for medical applications. The obtained systems possess high potential for miniaturization and were applied to glucose detection in real objects-laboratory rat blood plasma.

Brightly Luminescent (TbxLu1-x)2bdc3·nH2O MOFs: Effect of Synthesis Conditions on Structure and Luminescent Properties.

Luminescent, heterometallic terbium(III)-lutetium(III) terephthalate metal-organic frameworks (MOFs) were synthesized via direct reaction between aqueous solutions of disodium terephthalate and nitrates of corresponding lanthanides by using two methods: synthesis from diluted and concentrated solutions. For (TbxLu1-x)2bdc3·nH2O MOFs (bdc = 1,4-benzenedicarboxylate) containing more than 30 at. % of Tb3+, only one crystalline phase was formed: Ln2bdc3·4H2O. At lower Tb3+ concentrations, MOFs crystallized as the mixture of Ln2bdc3·4H2O and Ln2bdc3·10H2O (diluted solutions) or Ln2bdc3 (concentrated solutions). All synthesized samples that contained Tb3+ ions demonstrated bright green luminescence upon excitation into the 1ππ* excited state of terephthalate ions. The photoluminescence quantum yields (PLQY) of the compounds corresponding to the Ln2bdc3 crystalline phase were significantly larger than for Ln2bdc3·4H2O and Ln2bdc3·10H2O phases due to absence of quenching from water molecules possessing high-energy O-H vibrational modes. One of the synthesized materials, namely, (Tb0.1Lu0.9)2bdc3·1.4H2O, had one of the highest PLQY among Tb-based MOFs, 95%.

Effect of Gd3+, La3+, Lu3+ Co-Doping on the Morphology and Luminescent Properties of NaYF4:Sm3+ Phosphors.

The series of luminescent NaYF4:Sm3+ nano- and microcrystalline materials co-doped by La3+, Gd3+, and Lu3+ ions were synthesized by hydrothermal method using rare earth chlorides as the precursors and citric acid as a stabilizing agent. The phase composition of synthesized compounds was studied by PXRD. All synthesized materials except ones with high La3+ content (where LaF3 is formed) have a ß-NaYF4 crystalline phase. SEM images demonstrate that all particles have shape of hexagonal prisms. The type and content of doping REE significantly effect on the particle size. Upon 400 nm excitation, phosphors exhibit distinct emission peaks in visible part of the spectrum attributed to 4G5/2→6HJ transitions (J = 5/2-11/2) of Sm3+ ion. Increasing the samarium (III) content results in concentration quenching by dipole-dipole interactions, the optimum Sm3+concentration is found to be of 2%. Co-doping by non-luminescent La3+, Gd3+ and Lu3+ ions leads to an increase in emission intensity. This effect was explained from the Sm3+ local symmetry point of view.

ZnTe Crystal Multimode Cryogenic Thermometry Using Raman and Luminescence Spectroscopy.

In this study, ZnTe crystal was applied to provide precise thermal sensing for cryogenic temperatures. Multiple techniques, namely Raman and photoluminescence spectroscopies, were used to broaden the operating temperature range and improve the reliability of the proposed thermometers. Raman-based temperature sensing could be applied in the range of 20-100 K, while luminescence-based thermometry could be utilized in a narrower range of 20-70 K. However, the latter strategy provides better relative thermal sensitivity and temperature resolution. The best thermal performances based on a single temperature-dependent parameter attain Sr = 3.82% K-1 and ΔT = 0.12 K at T = 50 K. The synergy between multiple linear regression and multiparametric thermal sensing demonstrated for Raman-based thermometry results in a ten-fold improvement of Sr and a two-fold enhancement of ΔT. All studies performed testify that the ZnTe crystal is a promising multimode contactless optical sensor for cryogenic thermometry.

Green Emissive Copper(I) Coordination Polymer Supported by the Diethylpyridylphosphine Ligand as a Luminescent Sensor for Overheating Processes.

Tertiary diethylpyridylphosphine was synthesized by the reaction of pyridylphosphine with bromoethane in a suberbasic medium. The reaction of phosphine with the copper(I) iodide led to the formation of a copper(I) coordination polymer, which, according to the X-ray diffraction data, has an intermediate structure with a copper-halide core between the octahedral and stairstep geometries of the Cu4I4 clusters. The obtained coordination polymer exhibits a green emission in the solid state, which is caused by the 3(M+X)LCT transitions. The heating up of the copper(I) coordination polymer to 138.5 °C results in its monomerization and the formation of a new solid-state phase. The new phase exhibits a red emission, with the emission band maximum at 725 nm. According to the experimental data and quantum chemical computations, it was concluded that depolymerization probably leads to a complex that is formed with the octahedral structure of the copper-halide core. The resulting solid-state phase can be backward-converted to the polymer phase via recrystallization from the acetone or DMF. Therefore, the obtained coordination polymer can be considered a sensor or detector for the overheating of processes that should be maintained at temperatures below 138 °C (e.g., engines, boiling liquids, solar heat systems, etc.).

Near-Infrared Emission of HgTe Nanoplatelets Tuned by Pb-Doping.

Doping the semiconductor nanocrystals is one of the most effective ways to obtain unique materials suitable for high-performance next-generation optoelectronic devices. In this study, we demonstrate a novel nanomaterial for the near-infrared spectral region. To do this, we developed a partial cation exchange reaction on the HgTe nanoplatelets, substituting Hg cations with Pb cations. Under the optimized reaction conditions and Pb precursor ratio, a photoluminescence band shifts to ~1100 nm with a quantum yield of 22%. Based on steady-state and transient optical spectroscopies, we suggest a model of photoexcitation relaxation in the HgTe:Pb nanoplatelets. We also demonstrate that the thin films of doped nanoplatelets possess superior electric properties compared to their pristine counterparts. These findings show that Pb-doped HgTe nanoplatelets are new perspective material for application in both light-emitting and light-detection devices operating in the near-infrared spectral region.

Low-doped LaVO4:Eu3+ phosphor for multimode optical thermal sensing.

In the last decade much attention has been paid to the development of novel approaches in luminescence thermometry, which could allow contactless and noninvasive temperature sensing when traditional thermometers are useless. Typically, an optical thermometer exploits a distinct luminescence parameter to define temperature. However, the use of multimode sensors can significantly broaden the working range and improve the reliability of the temperature measurements. In this work, a Eu3+-doped LaVO4 sample was successfully utilized as a thermal sensor within a wide temperature range of 98-723 K based on monitoring various temperature-sensitive luminescence features. Different thermal sensing strategies were assessed and compared in terms of thermal sensitivity and temperature resolution. The best thermometric performances of the Eu3+-doped LaVO4 sensor reached an Sr = 1.49% K-1 and a ΔT = 0.6 K at room temperature. All the studies performed showed that the LaVO4:Eu3+ phosphor is a prospective multimode optical thermometer.

Deep-Blue Emissive Copper(I) Complexes Based on P-Thiophenylethyl-Substituted Cyclic Bisphosphines Displaying Photoinduced Structural Transformations of the Excited States.

A synthetic method for a primary 2-(thiophen-2'-yl)ethylphosphine was developed. The reaction of thiophenylethylphosphine with paraformaldehyde and primary arylamines leads to the formation of cyclic bisphosphines, namely, 1,5-di(aryl)-3,7-bis(thiophenylethyl)-1,5-diaza-3,7-diphosphacyclooctane (aryl = phenyl, p-tolyl). The obtained bisphosphines form cationic bis-P,P-chelate complexes with copper(I) tetrafluoroborate, which were structurally characterized by NMR spectroscopy, mass spectrometry, and elemental and XRD analyses. Surprisingly, the copper(I) complexes display a multiband emission in the solid state with maxima at 355-360, 425-430, and 480-490 nm and nanosecond lifetimes (1.2-1.4 ns) upon a 335 nm excitation. The excitation of the complexes at 360 nm at room temperature results in a deep-blue emission at 425-430 nm and a tail at 460-490 nm. A temperature decrease leads to an increased intensity of the emission band at 480 nm, while the luminescence lifetimes insignificantly increased up to 14 ns. Quantum chemical calculations explain the observed unusual luminescent behavior by the existence of "undistorted" and "flattened" singlet excited states of copper(I) complexes at room temperature and at 77 K, respectively.

Ratiometric thermometry using single Er3+-doped CaWO4phosphors.

Single doped CaWO4:Er3+phosphors were synthesized and studied for application of optical thermal sensing within a wide range of 98-773 K. Ratiometric strategy utilizing two luminescence intensity ratios, one between host and Er3+band (LIR1) and second between different Er3+transitions (LIR2), results in self-referencing temperature readouts. The presence of two temperature-dependent parameters could improve thermometric characteristics and broaden the working temperature range compared to a usual single-parameter thermometer. Thermometric performances of prepared samples were evaluated in terms of thermal sensitivities, temperature resolution and repeatability. The highest sensitivity of 2.09% K-1@300 K was found for LIR1, whereas LIR2provided more accurate thermal sensing with a temperature resolution of 0.06-0.1 K. Effect of Er3+doping concentration on sensing properties were studied. The presented findings indicate that CaWO4:Er3+phosphors are perspective in dual-mode thermal sensing with high sensitivity and sub-degree resolution.

Heterometallic Europium(III)-Lutetium(III) Terephthalates as Bright Luminescent Antenna MOFs.

A new series of luminescent heterometallic europium(III)-lutetium(III) terephthalate metal-organic frameworks, namely (EuxLu1-x)2bdc3·nH2O, was synthesized using a direct reaction in a water solution. At the Eu3+ concentration of 1-40 at %, the MOFs were formed as a binary mixture of the (EuxLu1-x)2bdc3 and (EuxLu1-x)2bdc3·4H2O crystalline phases, where the Ln2bdc3·4H2O crystalline phase was enriched by europium(III) ions. At an Eu3+ concentration of more than 40 at %, only one crystalline phase was formed: (EuxLu1-x)2bdc3·4H2O. All MOFs containing Eu3+ exhibited sensitization of bright Eu3+-centered luminescence upon the 280 nm excitation into a 1ππ* excited state of the terephthalate ion. The fine structure of the emission spectra of Eu3+ 5D0-7FJ (J = 0-4) significantly depended on the Eu3+ concentration. The luminescence quantum yield of Eu3+ was significantly larger for Eu-Lu terephthalates containing a low concentration of Eu3+ due to the absence of Eu-Eu energy migration and the presence of the Ln2bdc3 crystalline phase with a significantly smaller nonradiative decay rate compared to the Ln2bdc3·4H2O.

Double-doped YVO4 nanoparticles as optical dual-center ratiometric thermometers.

Crystalline inorganic nanoparticles doped with rare earth ions are widely used in a variety of scientific and industry applications due to the unique spectroscopic properties. The temperature dependence of their luminescence parameters makes them promising candidates for self-referencing thermal sensing. Here we report single phase YVO4 nanoparticles doped with different pairs of rare earth ions (Nd3+/Er3+, Tm3+/Er3+ and Nd3+/Tm3+) for contactless ratiometric thermometry within a wide temperature range of 298-573 K. The presence of dual luminescence centers in the optical thermometer allows one to circumvent the fundamental limitation of sensitivity inherent to thermometers based on thermally coupled levels. Important parameters for temperature sensing, such as relative thermal sensitivity and temperature resolution, were calculated for all synthesized samples and compared with the literature data. The YVO4:Tm3+,Er3+ sample displayed a relative sensitivity of 0.28% K-1 at room temperature, and the YVO4:Nd3+,Er3+ phosphor exhibited a high sensitivity of 0.56% K-1 at 573 K, while YVO4:Nd3+,Tm3+ demonstrated sub-degree thermal resolution. These findings demonstrate the good potential of dual-center ratiometric YVO4 thermometers and open the way toward future enhancement of their thermometric performances through variation of the doping concentration.

Photoluminescence and Energy Transfer in Double- and Triple-Lanthanide-Doped YVO4 Nanoparticles.

Optical materials doped with several lanthanides are unique in their properties and are widely used in various fields of science and technology. The study of these systems provides solutions for noncontact thermometry, bioimaging, sensing technology, and others. In this paper, we report on the demonstration of YVO4 nanoparticles doped with one, two, and three different rare earth ions (Tm3+, Er3+, and Nd3+). We discuss the morphology, structural properties, and luminescence behavior of particles. Luminescence decay kinetics reveal the energy transfer efficiency (up to 78%) for different ions under the selective excitation of individual ions. Thus, we found that the energy transition from Tm3+ is more favorable than from Er3+ while we did not observe any significant energy rearrangement in the samples under the excitation of Nd3+. The observed strong variation of REI lifetimes makes the suggested nanoparticles promising for luminescent labeling, anticounterfeiting, development of data storage systems, etc.

Dual-center co-doped and mixed ratiometric LuVO4:Nd3+/Yb3+nanothermometers.

During last decade luminescence thermometry has become a widely studied research field due to its potential applications for real time contactless temperature sensing where usual thermometers cannot be used. Special attention is paid to the development of accurate and reliable thermal sensors with simple reading. To address existing problems of ratiometric thermometers based on thermally-coupled levels, LuVO4:Nd3+/Yb3+thermal sensors were studied as a proof-of-concept of dual-center thermometer obtained by co-doping or mixture. Both approaches to create a dual-center sensor were compared in terms of energy transfer efficiency, relative sensitivity, and temperature resolution. Effect of excitation mechanism and Yb3+doping concentration on thermometric performances was also investigated. The best characteristics ofSr = 0.34% K-1@298 K and ΔT = 0.2 K were obtained for mixed phosphors upon host excitation.

Upconverting NIR-to-NIR LuVO4:Nd3+/Yb3+ Nanophosphors for High-Sensitivity Optical Thermometry.

Accurate contactless thermometry is required in many rapidly developing modern applications such as biomedicine, micro- and nanoelectronics, and integrated optics. Ratiometric luminescence thermal sensing attracts a lot of attention due to its robustness toward systematic errors. Herein, a phonon-assisted upconversion in LuVO4:Nd3+/Yb3+ nanophosphors was successfully applied for temperature measurements within the 323-873 K range via the luminescence intensity ratio technique. Dual-activating samples were obtained by codoping and mixing single-doped nanopowders. The effect of the type of dispersion system and the Yb3+ doping concentration was studied in terms of thermometric performances. The relative thermal sensitivity reached a value of 2.6% K-1, while the best temperature resolution was 0.2 K. The presented findings show the way to enhance the thermometric characteristics of contactless optical sensors.