Scalable optical manufacture of dynamic structural colour in stretchable materials.

Structurally coloured materials that change their colour in response to mechanical stimuli are uniquely suited for optical sensing and visual communication1-4. The main barrier to their widespread adoption is a lack of manufacturing techniques that offer spatial control of the materials' nanoscale structures across macroscale areas. Here, by adapting Lippmann photography5, we report an approach for producing large-area, structurally coloured sheets with a rich and easily controlled design space of colour patterns, spectral properties, angular scattering characteristics and responses to mechanical stimuli. Relying on just a digital projector and commercially available photosensitive elastomers, our approach is fast, scalable, affordable and relevant for a wide range of manufacturing settings. We also demonstrate prototypes for mechanosensitive healthcare materials and colorimetric strain and stress sensing for human-computer interaction and robotics.

In vivo visualization of butterfly scale cell morphogenesis in Vanessa cardui.

During metamorphosis, the wings of a butterfly sprout hundreds of thousands of scales with intricate microstructures and nano-structures that determine the wings' optical appearance, wetting characteristics, thermodynamic properties, and aerodynamic behavior. Although the functional characteristics of scales are well known and prove desirable in various applications, the dynamic processes and temporal coordination required to sculpt the scales' many structural features remain poorly understood. Current knowledge of scale growth is primarily gained from ex vivo studies of fixed scale cells at discrete time points; to fully understand scale formation, it is critical to characterize the time-dependent morphological changes throughout their development. Here, we report the continuous, in vivo, label-free imaging of growing scale cells of Vanessa cardui using speckle-correlation reflection phase microscopy. By capturing time-resolved volumetric tissue data together with nanoscale surface height information, we establish a morphological timeline of wing scale formation and gain quantitative insights into the underlying processes involved in scale cell patterning and growth. We identify early differences in the patterning of cover and ground scales on the young wing and quantify geometrical parameters of growing scale features, which suggest that surface growth is critical to structure formation. Our quantitative, time-resolved in vivo imaging of butterfly scale development provides the foundation for decoding the processes and biomechanical principles involved in the formation of functional structures in biological materials.

Actuation of Janus Emulsion Droplets via Optothermally Induced Marangoni Forces.

Microscale Janus emulsions represent a versatile material platform for dynamic refractive, reflective, and light-emitting optical components. Here, we present a mechanism for droplet actuation that exploits thermocapillarity. Using optically induced thermal gradients, an interfacial tension differential is generated across the surfactant-free internal capillary interface of Janus droplets. The interfacial tension differential causes droplet-internal Marangoni flows and a net torque, resulting in a predictable and controllable reorientation of the droplets. The effect can be quantitatively described with a simple model that balances gravitational and thermal torques. Occurring in small thermal gradients, these optothermally induced Marangoni dynamics represent a promising mechanism for controlling droplet-based micro-optical components.

Microstructural design for mechanical-optical multifunctionality in the exoskeleton of the flower beetle Torynorrhina flammea.

Biological systems have a remarkable capability of synthesizing multifunctional materials that are adapted for specific physiological and ecological needs. When exploring structure-function relationships related to multifunctionality in nature, it can be a challenging task to address performance synergies, trade-offs, and the relative importance of different functions in biological materials, which, in turn, can hinder our ability to successfully develop their synthetic bioinspired counterparts. Here, we investigate such relationships between the mechanical and optical properties in a multifunctional biological material found in the highly protective yet conspicuously colored exoskeleton of the flower beetle, Torynorrhina flammea Combining experimental, computational, and theoretical approaches, we demonstrate that a micropillar-reinforced photonic multilayer in the beetle's exoskeleton simultaneously enhances mechanical robustness and optical appearance, giving rise to optical damage tolerance. Compared with plain multilayer structures, stiffer vertical micropillars increase stiffness and elastic recovery, restrain the formation of shear bands, and enhance delamination resistance. The micropillars also scatter the reflected light at larger polar angles, enhancing the first optical diffraction order, which makes the reflected color visible from a wider range of viewing angles. The synergistic effect of the improved angular reflectivity and damage localization capability contributes to the optical damage tolerance. Our systematic structural analysis of T. flammea's different color polymorphs and parametric optical and mechanical modeling further suggest that the beetle's microarchitecture is optimized toward maximizing the first-order optical diffraction rather than its mechanical stiffness. These findings shed light on material-level design strategies utilized in biological systems for achieving multifunctionality and could thus inform bioinspired material innovations.

Dynamic Coloration of Complex Emulsions by Localization of Gold Rings Near the Triphase Junction.

Multiphase microscale emulsions are a material platform that can be tuned and dynamically configured by a variety of chemical and physical phenomena, rendering them inexpensive and broadly programmable optical transducers. Interface engineering underpins many of these sensing schemes but typically focuses on manipulating a single interface, while engineering of the multiphase junctions of complex emulsions remains underexplored. Herein, multiphilic triblock copolymer surfactants are synthesized and assembled at the triphase junction of a dynamically reconfigurable biphasic emulsion. Tailoring the linear structure and composition of the polymer surfactants provides affinity to each phase of the complex emulsion (hydrocarbon, fluorocarbon, and continuous water phase), yielding selective localization of polymers around the triphase junction. Conjugation of these polymers with gold nanoparticles, forming structured rings, affords a dynamic reflected isotropic structural color that tracks with emulsion morphology, demonstrating the uniquely enabling nature of a functionalized triphase interface. This color is the result of interference of light along the internal hydrocarbon/fluorocarbon interface, with the gold nanoparticles scattering and redirecting light into total internal reflection competent paths. Thus, the functionalization of the triphase junction renders complex emulsions colorimetric sensors, a powerful tool toward sensitive and simple sensing platforms.

Topological mechanics of knots and tangles.

Knots play a fundamental role in the dynamics of biological and physical systems, from DNA to turbulent plasmas, as well as in climbing, weaving, sailing, and surgery. Despite having been studied for centuries, the subtle interplay between topology and mechanics in elastic knots remains poorly understood. Here, we combined optomechanical experiments with theory and simulations to analyze knotted fibers that change their color under mechanical deformations. Exploiting an analogy with long-range ferromagnetic spin systems, we identified simple topological counting rules to predict the relative mechanical stability of knots and tangles, in agreement with simulations and experiments for commonly used climbing and sailing bends. Our results highlight the importance of twist and writhe in unknotting processes, providing guidance for the control of systems with complex entanglements.

Luminescent Surfaces with Tailored Angular Emission for Compact Dark-Field Imaging Devices.

Dark-field microscopy is a standard imaging technique widely employed in biology that provides high image contrast for a broad range of unstained specimens1. Unlike bright-field microscopy, it accentuates high spatial frequencies and can therefore be used to emphasize and resolve small features. However, the use of dark-field microscopy for reliable analysis of blood cells, bacteria, algae, and other marine organisms often requires specialized, bulky microscope systems, and expensive additional components, such as dark-field-compatible objectives or condensers2,3. Here, we propose to simplify and downsize dark-field microscopy equipment by generating the high-angle illumination cone required for dark field microscopy directly within the sample substrate. We introduce a luminescent photonic substrate with a controlled angular emission profile and demonstrate its ability to generate high-contrast dark-field images of micrometre-sized living organisms using standard optical microscopy equipment. This new type of substrate forms the basis for miniaturized lab-on-chip dark-field imaging devices, compatible with simple and compact light microscopes.

In-Plane Direct-Write Assembly of Iridescent Colloidal Crystals.

Materials made by directed self-assembly of colloids can exhibit a rich spectrum of optical phenomena, including photonic bandgaps, coherent scattering, collective plasmonic resonance, and wave guiding. The assembly of colloidal particles with spatial selectivity is critical for studying these phenomena and for practical device fabrication. While there are well-established techniques for patterning colloidal crystals, these often require multiple steps including the fabrication of a physical template for masking, etching, stamping, or directing dewetting. Here, the direct-writing of colloidal suspensions is presented as a technique for fabrication of iridescent colloidal crystals in arbitrary 2D patterns. Leveraging the principles of convective assembly, the process can be optimized for high writing speeds (≈600 µm s-1 ) at mild process temperature (30 °C) while maintaining long-range (cm-scale) order in the colloidal crystals. The crystals exhibit structural color by grating diffraction, and analysis of diffraction allows particle size, relative grain size, and grain orientation to be deduced. The effect of write trajectory on particle ordering is discussed and insights for developing 3D printing techniques for colloidal crystals via layer-wise printing and sintering are provided.

Rapid Detection of Salmonella enterica via Directional Emission from Carbohydrate-Functionalized Dynamic Double Emulsions.

Reliable early-stage detection of foodborne pathogens is a global public health challenge that requires new and improved sensing strategies. Here, we demonstrate that dynamically reconfigurable fluorescent double emulsions can function as highly responsive optical sensors for the rapid detection of carbohydrates fructose, glucose, mannose, and mannan, which are involved in many biological and pathogenic phenomena. The proposed detection strategy relies on reversible reactions between boronic acid surfactants and carbohydrates at the hydrocarbon/water interface leading to a dynamic reconfiguration of the droplet morphology, which alters the angular distribution of the droplet's fluorescent light emission. We exploit this unique chemical-morphological-optical coupling to detect Salmonella enterica, a type of bacteria with a well-known binding affinity for mannose. We further demonstrate an oriented immobilization of antibodies at the droplet interface to permit higher selectivity. Our demonstrations yield a new, inexpensive, robust, and generalizable sensing strategy that can help to facilitate the early detection of foodborne pathogens.

Colouration by total internal reflection and interference at microscale concave interfaces.

Many physical phenomena create colour: spectrally selective light absorption by pigments and dyes1,2, material-specific optical dispersion3 and light interference4-11 in micrometre-scale and nanometre-scale periodic structures12-17. In addition, scattering, diffraction and interference mechanisms are inherent to spherical droplets18, which contribute to atmospheric phenomena such as glories, coronas and rainbows19. Here we describe a previously unrecognized mechanism for creating iridescent structural colour with large angular spectral separation. Light travelling along different trajectories of total internal reflection at a concave optical interface can interfere to generate brilliant patterns of colour. The effect is generated at interfaces with dimensions that are orders of magnitude larger than the wavelength of visible light and is readily observed in systems as simple as water drops condensed on a transparent substrate. We also exploit this phenomenon in complex systems, including multiphase droplets, three-dimensional patterned polymer surfaces and solid microparticles, to create patterns of iridescent colour that are consistent with theoretical predictions. Such controllable structural colouration is straightforward to generate at microscale interfaces, so we expect that the design principles and predictive theory outlined here will be of interest both for fundamental exploration in optics and for application in functional colloidal inks and paints, displays and sensors.

Direct-Write Freeform Colloidal Assembly.

Colloidal assembly is an attractive means to control material properties via hierarchy of particle composition, size, ordering, and macroscopic form. However, despite well-established methods for assembling colloidal crystals as films and patterns on substrates, and within microscale confinements such as droplets or microwells, it has not been possible to build freeform colloidal crystal structures. Direct-write colloidal assembly, a process combining the bottom-up principle of colloidal self-assembly with the versatility of direct-write 3D printing, is introduced in the present study. By this method, centimeter-scale, free-standing colloidal structures are built from a variety of materials. A scaling law that governs the rate of assembly is derived; macroscale structural color is tailored via the size and crystalline ordering of polystyrene particles, and several freestanding structures are built from silica and gold particles. Owing to the diversity of colloidal building blocks and the means to control their interactions, direct-write colloidal assembly could therefore enable novel composites, photonics, electronics, and other materials and devices.

Stretchable Optomechanical Fiber Sensors for Pressure Determination in Compressive Medical Textiles.

Medical textiles are widely used to exert pressure on human tissues during treatment of post-surgical hematoma, burn-related wounds, chronic venous ulceration, and other maladies. However, the inability to dynamically sense and adjust the applied pressure often leads to suboptimal pressure application, prolonging treatment or resulting in poor patient outcomes. Here, a simple strategy for measuring sub-bandage pressure by integrating stretchable optomechanical fibers into elastic bandages is demonstrated. Specifically, these fibers possess an elastomeric photonic multilayer cladding that surrounds an extruded stretchable core filament. They can sustain repetitive strains of over 100%, and respond to deformation with a predictable and reversible color variation. Integrated into elastic textiles, which apply pressure as a function of their strain, these fibers can provide instantaneous and localized pressure feedback. These colorimetric fiber sensors are well suited for medical textiles, athletic apparel, and other smart wearable technologies, especially when repetitive, large deformations are required.

Structural origins of coloration in the spider Phoroncidia rubroargentea Berland, 1913 (Araneae: Theridiidae) from Madagascar.

This study investigates the structural basis for the red, silver and black coloration of the theridiid spider, Phoroncidia rubroargentea (Berland, 1913) from Madagascar. Specimens of this species can retain their colour after storage in ethanol for decades, whereas most other brightly pigmented spider specimens fade under identical preservation conditions. Using correlative optical, structural and chemical analysis, we identify the colour-generating structural elements and characterize their optical properties. The prominent silvery appearance of the spider's abdomen results from regularly arranged guanine microplatelets, similar to those found in other spiders and fish. The microplatelets are composed of a doublet structure twinned about the [[Formula: see text]] axis, as suggested by electron diffraction. The red coloration originates from chambered microspheres (approx. 1 µm in diameter), which contain structured fluorescent material. Co-localization of the red microparticles on top of the reflective guanine microplatelets appears to enhance the red coloration. The spider's thick cuticular layer, which encases its abdomen, varies in its optical properties, being transparent in regions where only guanine reflectors are present, and tanned, exhibiting light absorption where the red microspheres are found. Moreover, colour degradation in some preserved spider specimens that had suffered damage to the cuticular layer suggests that this region of the exoskeleton may play an important role in the stabilization of the red coloration.

Progress and Opportunities in Soft Photonics and Biologically Inspired Optics.

Optical components made fully or partially from reconfigurable, stimuli-responsive, soft solids or fluids-collectively referred to as soft photonics-are poised to form the platform for tunable optical devices with unprecedented functionality and performance characteristics. Currently, however, soft solid and fluid material systems still represent an underutilized class of materials in the optical engineers' toolbox. This is in part due to challenges in fabrication, integration, and structural control on the nano- and microscale associated with the application of soft components in optics. These challenges might be addressed with the help of a resourceful ally: nature. Organisms from many different phyla have evolved an impressive arsenal of light manipulation strategies that rely on the ability to generate and dynamically reconfigure hierarchically structured, complex optical material designs, often involving soft or fluid components. A comprehensive understanding of design concepts, structure formation principles, material integration, and control mechanisms employed in biological photonic systems will allow this study to challenge current paradigms in optical technology. This review provides an overview of recent developments in the fields of soft photonics and biologically inspired optics, emphasizes the ties between the two fields, and outlines future opportunities that result from advancements in soft and bioinspired photonics.

Corrigendum: Photothermally triggered actuation of hybrid materials as a new platform for in vitro cell manipulation.

This corrects the article DOI: 10.1038/ncomms14700.

Fano resonances from coupled whispering-gallery modes in photonic molecules.

We present a rigorous investigation of resonant coupling between microspheres based on multipole expansions. The microspheres have diameters in the range of several micrometers and can be used to realize various photonic molecule configurations. We reveal and quantify the interactions between the whispering gallery modes inside individual microspheres and the propagation modes of the entire photonic molecule structures. We show that Fano-like resonances in photonic molecules can be engineered by tuning the coupling between the resonant and radiative modes when the structures are illuminated with simple dipole radiation.

Photothermally triggered actuation of hybrid materials as a new platform for in vitro cell manipulation.

Mechanical forces in the cell's natural environment have a crucial impact on growth, differentiation and behaviour. Few areas of biology can be understood without taking into account how both individual cells and cell networks sense and transduce physical stresses. However, the field is currently held back by the limitations of the available methods to apply physiologically relevant stress profiles on cells, particularly with sub-cellular resolution, in controlled in vitro experiments. Here we report a new type of active cell culture material that allows highly localized, directional and reversible deformation of the cell growth substrate, with control at scales ranging from the entire surface to the subcellular, and response times on the order of seconds. These capabilities are not matched by any other method, and this versatile material has the potential to bridge the performance gap between the existing single cell micro-manipulation and 2D cell sheet mechanical stimulation techniques.