Lipid emulsion attenuates vasodilation by decreasing intracellular calcium and nitric oxide in vascular endothelial cells.

Lipid emulsion (LE), a widely used parenteral nutrition, exhibits a well-documented ability to reverse the vasodilatory effects induced by acetylcholine in blood vessels. However, the specific mechanisms underlying this action are not yet fully understood. This study aimed to elucidate the mechanism by which LE reverses vasodilation in vitro through dose-response curve experiments, calcium imaging, and fluorescence assays. The results revealed a significant attenuation of acetylcholine (Ach)-induced vasodilation in rat thoracic aortic rings following LE exposure. In human aortic endothelial cells, pretreatment with LE significantly suppressed ATP-induced calcium elevation. This suppression persisted even after elimination of extracellular calcium with a calcium chelator. Moreover, LE pre-exposure reduced the intracellular calcium concentration ([Ca2+]i) elevation in endothelial cells following cyclopiazonic acid (CPA) treatment, suggesting enhanced endoplasmic reticulum (ER) calcium reuptake. Additionally, nitric oxide (NO) fluorescence assays showed a decrease in NO production upon ATP stimulation post-LE pretreatment of endothelial cells. Taken together, these results indicate that the reversal of vasodilation by LE may involve enhanced ER calcium uptake, leading to a reduction in intracellular calcium concentration and suppression of NO (key vasodilatory agent) synthesis.

Integrating NiSe2-MoSe2 heterojunctions with N-doped porous carbon substrate architecture for an enhanced electrocatalytic water splitting device.

The development of sustainable energy technologies relies on the exploitation of efficient and durable electrocatalysts for water splitting at high current densities. Our work presents a novel bifunctional catalyst, denoted as NM@NC/CC, which combines the benefits of NiSe2-MoSe2 heterojunctions with nitrogen-enriched porous carbon derived from metal-organic frameworks (MOFs). The integration of these components is designed to harness their combined advantages, which include enhanced electron transfer, improved mass and gas evolution dynamics, and an increased number of catalytically active sites. These features collectively optimize the energetics for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). As a result, the catalyst facilitates rapid kinetics for the overall water-splitting process. The NM@NC/CC demonstrates low overpotentials, requiring only 91 mV for the HER and 280 mV for the OER to reach a current density of 10 mA cm-2. Even at higher current densities of 100 mA cm-2 for HER and 50 mA cm-2 for OER, the overpotentials are only 159 mV and 350 mV, respectively. Additionally, a two-electrode setup using this catalyst achieves a current density of 10 mA cm-2 with a minimal cell voltage of 1.56 V. The insights gained from this study will contribute to the advancement of electrocatalysts for energy conversion technologies.

Advanced 3D-Printed Potassium Ammonium Vanadate/rGO Aerogel Cathodes for Durable and High-Capacity Potassium-Ion Batteries.

A 3D-printed oxygen-vacancy-rich potassium ammonium vanadate/reduced graphene oxide (KNVOv/rGO) microlattice aerogel is designed for the cathode in high-performance K-ion batteries (KIBs). The 3D-printed KNVOv/rGO electrode with periodic submillimeter microchannels and interconnected printed filaments is composed of highly dispersed KNVOv nanobelts, wrinkled graphene nanoflakes, and abundant micropores. The well-defined 3D porous microlattice structure of the rGO backbone not only provides the interconnected conductive 3D network and the required mechanical robustness but also facilitates the penetration of the liquid electrolyte into inner active sites, consequently ensuring a stable electrochemical environment for K-ion intercalation/deintercalation within the KNVOv nanobelts. The 3D-printed KNVOv/rGO microlattice aerogel electrode has a high discharge capacity of 109.3 mAh g-1 with a capacity retention rate of 92.6% after 200 cycles at 50 mA g-1 and maintains a discharge capacity of 75.8 mAh g-1 after 2000 cycles at 500 mA g-1. The flexible pouch-type KIB battery consisting of the 3D-printed KNVOv/rGO has good mechanical durability and retains a high specific capacity under different forms of deformation such as bending and folding. The results provide valuable insights into the integration of advanced 3D-printed electrode materials into K-ion batteries and the design of flexible and wearable energy storage devices.

Optimal Oxophilicity at the Fe-Nx Interface Enhances the Generation of Singlet Oxygen for Efficient Fenton-Like Catalysis.

In the pursuit of efficient singlet oxygen generation in Fenton-like catalysis, the utilization of single-atom catalysts (SACs) emerges as a highly desired strategy. Here, a discovery is reported that the single-atom Fe coordinated with five N-atoms on N-doped porous carbon, denoted as Fe-N5/NC, outperform its counterparts, those coordinated with four (Fe-N4/NC) or six N-atoms (Fe-N6/NC), as well as state-of-the-art SACs comprising other transition metals. Thus, Fe-N5/NC exhibits exceptional efficacy in activating peroxymonosulfate for the degradation of organic pollutants. The coordination number of N-atoms can be readily adjusted by pyrolysis of pre-assembly structures consisting of Fe3+ and various isomers of phenylenediamine. Fe-N5/NC displayed outstanding tolerance to environmental disturbances and minimal iron leaching when incorporated into a membrane reactor. A mechanistic study reveals that the axial ligand N reduces the contribution of Fe-3d orbitals in LUMO and increases the LUMO energy of Fe-N5/NC. This, in turn, reduces the oxophilicity of the Fe center, promoting the reactivity of *OO intermediate-a pivotal step for yielding singlet oxygen and the rate-determining step. These findings unveil the significance of manipulating the oxophilicity of metal atoms in single-atom catalysis and highlight the potential to augment Fenton-like catalysis performance using Fe-SACs.

3D-Printed Hierarchically Microgrid Frameworks of Sodiophilic Co3O4@C/rGO Nanosheets for Ultralong Cyclic Sodium Metal Batteries.

Herein, hierarchically structured microgrid frameworks of Co3O4 and carbon composite deposited on reduced graphene oxide (Co3O4@C/rGO) are demonstrated through the three-dimensioinal (3D) printing method, where the porous structure is controllable and the height and width are scalable, for dendrite-free Na metal deposition. The sodiophilicity, facile Na metal deposition kinetics, and NaF-rich solid electrolyte interphase (SEI) formation of cubic Co3O4 phase are confirmed by combined spectroscopic and computational analyses. Moreover, the uniform and reversible Na plating/stripping process on 3D-printed Co3O4@C/rGO host is monitored in real time using in situ transmission electron and optical microscopies. In symmetric cells, the 3D printed Co3O4@C/rGO electrode achieves a long-term stability over 3950 at 1 mA cm-2 and 1 mAh cm-2 with a superior Coulombic efficiency (CE) of 99.87% as well as 120 h even at 20 mA cm-2 and 20 mAh cm-2, far exceeding the previously reported carbon-based hosts for Na metal anodes. Consequently, the full cells of 3D-printed Na@Co3O4@C/rGO anode with 3D-printed Na3V2(PO4)3@C-rGO cathode (≈15.7 mg cm-2) deliver the high specific capacity of 97.97 mAh g-1 after 500 cycles with a high CE of 99.89% at 0.5 C, demonstrating the real operation of flexible Na metal batteries.

[Content of secondary metabolites and antioxidant activities of Lonicera japonica flowers at different developmental stages from Shandong province].

This study established an ultrasound-assisted extraction-high performance liquid chromatography method for simulta-neously determinining the content of 11 bioactive compounds including iridoids, phenolic acids, and flavonoids in Lonicera japonica flowers. The flowers at six stages from the rice bud stage(ML) to the golden flower stage(JH) of L. japonica varieties 'Sijuhua' and 'Beihua No.1' in two planting bases in Shandong province were collected. The established method was employed to determine the content of 11 target compounds, on the basis of which the dynamics of active components in L. japonica sampels during different development stages was investigated. The correlation analysis was carried out to reveal the correlations of the content of iridoids, phenolic acids, and flavonoids. Furthermore, the antioxidant activities of samples at different developmental stages were determined, and the relationship between antioxidant activity and chemical components was analyzed by the correlation analysis. The results showed that the total content of the 11 components in 'Sijihua' changed in a "W" pattern from the ML to JH, being the highest at the ML and the second at the slight white stage(EB). The total content of 11 compounds in 'Beihua No.1' was the highest at the ML and decreased gra-dually from the ML to JH. The samples of 'Sijihua' had higher content of iridoids and lower content of phenolic acids than those of 'Beihua No.1'. The content of flavonoids and phenolic acids showed a positive correlation(R~2=0.90, P<0.05) in 'Sijihua' but no obvious correlation in 'Beihua No.1'. The antioxidant activity and phenolic acid content showed positive correlations, with the determination coefficients(R~2) of 0.84(P<0.05) in 'Beihua No.1' and 0.73(P<0.05) in 'Sijihua'. The antioxidant activity of both varieties was the strongest at the ML and the second at the EB. This study revealed that the content dynamics of iridoids, phenolic acids, and flavonoids in 'Sijihua' and 'Beihua No.1' cultivated in Shandong province during different developmental stages. The results indicated that the antioxidant activity of L. japonica flowers was significantly correlated with the content of phenolic acids at different deve-lopmental stages, which provided a basis for determining the optimum harvest time of L. japonica flowers.

Exploring the therapeutic potential of cannabidiol for sleep deprivation-induced hyperalgesia.

Hyperalgesia resulting from sleep deprivation (SD) poses a significant a global public health challenge with limited treatment options. The nucleus accumbens (NAc) plays a crucial role in the modulation of pain and sleep, with its activity regulated by two distinct types of medium spiny neurons (MSNs) expressing dopamine 1 or dopamine 2 (D1-or D2) receptors (referred to as D1-MSNs and D2-MSNs, respectively). However, the specific involvement of the NAc in SD-induced hyperalgesia remains uncertain. Cannabidiol (CBD), a nonpsychoactive phytocannabinoid, has demonstrated analgesic effects in clinical and preclinical studies. Nevertheless, its potency in addressing this particular issue remains to be determined. Here, we report that SD induced a pronounced pronociceptive effect attributed to the heightened intrinsic excitability of D2-MSNs within the NAc in Male C57BL/6N mice. CBD (30 mg/kg, i.p.) exhibited an anti-hyperalgesic effect. CBD significantly improved the thresholds for thermal and mechanical pain and increased wakefulness by reducing delta power. Additionally, CBD inhibited the intrinsic excitability of D2-MSNs both in vitro and in vivo. Bilateral microinjection of the selective D2 receptor antagonist raclopride into the NAc partially reversed the antinociceptive effect of CBD. Thus, these findings strongly suggested that SD activates NAc D2-MSNs, contributing heightened to pain sensitivity. CBD exhibits antinociceptive effects by activating D2R, thereby inhibiting the excitability of D2-MSNs and promoting wakefulness under SD conditions.

Template-Free Synthesis of Boron-Doped Graphitic Carbon Nitride Porous Nanotubes for Enhanced Photocatalytic Hydrogen Evolution.

The photocatalytic activity of g-C3N4 can be enhanced by improving photoinduced carrier separation and exposing sufficient reactive sites. In this study, we synthesized B-doped porous tubular g-C3N4 (BCNT) using a H3BO3-assisted supramolecular self-template method, wherein H3BO3 helped in B-doping, building a porous structure, and maintaining one-dimensional nanotubes. The tubular structure had an ultrathin tube wall and large aspect ratio, which are conducive to the directional transmission and separation of photogenerated carriers; moreover, the abundant pore structure of the tube wall could fully expose the reactive sites. The introduction of B and the cyano group modulated the bandgap of g-C3N4 and elevated the position of the conduction band, thus enhancing the photoreduction ability and effectively improving the hydrogen evolution performance. Consequently, the hydrogen evolution of BCNT-2 (220.8, 53.2 µmol·h-1) was 1.82 and 1.54 times that of ultrathin g-C3N4 nanosheets (CNN, 121.3, 34.6 µmol·h-1) under simulated sunlight and LED lamp irradiation, respectively. Thus, this work provides in-depth insights into the rational design of one-dimensional g-C3N4 nanotubes with high hydrogen evolution activity under visible irradiation.

Rational Construction of 3D Self-Supported MOF-Derived Cobalt Phosphide-Based Hollow Nanowall Arrays for Efficient Overall Water Splitting At large Current Density.

Developing efficient nonprecious bifunctional electrocatalysts for hydrogen and oxygen evolution reactions (HER and OER) in the same electrolyte with a low overpotential and large current density presents an appealing yet challenging goal for large-scale water electrolysis. Herein, a unique 3D self-branched hierarchical nanostructure composed of ultra-small cobalt phosphide (CoP) nanoparticles embedded into N, P-codoped carbon nanotubes knitted hollow nanowall arrays (CoPʘNPCNTs HNWAs) on carbon textiles (CTs) through a carbonization-phosphatization process is presented. Benefiting from the uniform protrusion distributions of CoP nanoparticles, the optimum CoPʘNPCNTs HNWAs composites with high abundant porosity exhibit superior electrocatalytic activity and excellent stability for OER in alkaline conditions, as well as for HER in both acidic and alkaline electrolytes, even under large current densities. Furthermore, the assembled CoPʘNPCNTs/CTs||CoPʘNPCNTs/CTs electrolyzer demonstrates exceptional performance, requiring an ultralow cell voltage of 1.50 V to deliver the current density of 10 mA cm-2 for overall water splitting (OWS) with favorable stability, even achieving a large current density of 200 mA cm-2 at a low cell voltage of 1.78 V. Density functional theory (DFT) calculation further reveals that all the C atoms between N and P atoms in CoPʘNPCNTs/CTs act as the most efficient active sites, significantly enhancing the electrocatalytic properties. This strategy, utilizing 2D MOF arrays as a structural and compositional material to create multifunctional composites/hybrids, opens new avenues for the exploration of highly efficient and robust non-noble-metal catalysts for energy-conversion reactions.

Multiscale Interface Engineering of Sulfur-Doped TiO2 Anode for Ultrafast and Robust Sodium Storage.

Sodium-ion batteries (SIBs) are a promising electrochemical energy storage system; however, their practical application is hindered by the sluggish kinetics and interfacial instability of anode-active materials. Here, to circumvent these issues, we proposed the multiscale interface engineering of S-doped TiO2 electrodes with minor sulfur/carbon inlaying (S/C@sTiO2), where the electrode-electrolyte interface (SEI) and electrode-current collector interface (ECI) are tuned to improve the Na-storage performance. It is found that the S dopant greatly promotes the Na+ diffusion kinetics. Moreover, the ether electrolyte generates much less NaF in the cycled electrode, but relatively richer NaF in the SEI in comparison to fluoroethylene carbonate-contained ester electrolyte, leading to a thin (9 nm), stable, and kinetically favorable SEI film. More importantly, the minor sodium polysulfide intermediates chemically interact with the Cu current collector to form a Cu2S interface between the electrode and the Cu foil. The conductive tree root-like Cu2S ECI serves not only as active sites to boost the specific capacity but also as a 3D "second current collector" to reinforce the electrode and improve the Na+ reaction kinetics. The synergy of S-doping and optimized SEI and ECI realizes large specific capacity (464.4 mAh g-1 at 0.1 A g-1), ultrahigh rate capability (305.8 mAh g-1 at 50 A g-1), and ultrastable cycling performance (91.5% capacity retention after 3000 cycles at 5 A g-1). To the best of our knowledge, the overall SIB performances of S/C@sTiO2 are the best among all of the TiO2-based electrodes.

Liraglutide Improves Nonalcoholic Fatty Liver Disease in Diabetic Mice by Activating Autophagy Through AMPK/mTOR Signaling Pathway.

Background: Type 2 diabetes (T2DM) combined nonalcoholic fatty liver disease (NAFLD) are characterized by metabolic disruptions. Liraglutide has been proved to be effective in T2DM. If LRG could regulate NAFLD combined T2DM has not been reported. Methods: Intraperitoneal injection of 1% streptozotocin (STZ) plus high-sugar and high-fat diet was used to induce NAFLD combined T2DM animal model. Palmitic acid (200 µmol/L) and glucose (25 mmol/L) incubation were used to induce cell model. The cell apoptosis, mRNA and protein expression were measured through flow cytometry, PCR, and Western blotting, respectively. Results: Liraglutide significantly improved the liver injury of NAFLD combined T2DM rats, but Com-C reversed the effect of liraglutide. The decreased AMPK/mTOR signaling pathway in the NAFLD combined T2DM animals was greatly activated by liraglutide. Com-C reversed the protection effects of liraglutide on palmitic acid+glucose induced cell damage. Conclusion: Liraglutide could greatly alleviate the damage caused by NAFLD+T2DM and palmitic acid+glucose. The protection effects of liraglutide were greatly inhibited by suppressing AMPK/mTOR signaling pathway. This research might provide a novel therapeutic strategy for the prevention and treatment of NAFLD combined T2DM disease.

The therapeutic effect of wine-processed Corni Fructus on chronic renal failure in rats through the interference with the LPS/IL-1-mediated inhibition of RXR function.

ETHNOPHARMACOLOGICAL RELEVANCE: Corni Fructus, derived from the fruit of Cornus officinalis Sieb. et Zucc, is a widely utilized traditional Chinese medicine (TCM) with established efficacy in the treatment of diverse chronic kidney diseases. Crude Corni Fructus (CCF) and wine-processed Corni Fructus (WCF) are the main processed forms of Corni Fructus. Generally, TCM is often used after processing (paozhi). Despite the extensive use of processed TCM, the underlying mechanisms of processing for most TCMs have been unclear so far. AIM OF THE STUDY: In this study, an integrated strategy combined renal metabolomics with proteomics was established and investigated the potential processing mechanisms of CCF or WCF on chronic renal failure (CRF) models. MATERIALS AND METHODS: Firstly, the differences in biochemical parameters and pathological histology were compared to evaluate the effects of CCF and WCF on CRF model rats. Then, the tissue differential metabolites and proteins between CCF and WCF on CRF model rats were screened based on metabolomics and proteomics technology. Concurrently, a combined approach of metabolomics and proteomics was employed to investigate the underlying mechanisms associated with these marker metabolic products and proteins. RESULTS: Compared to the MG group, there were 27 distinct metabolites and 143 different proteins observed in the CCF-treatment group, while the WCF-treatment group exhibited 24 distinct metabolites and 379 different proteins. Further, the integration interactions analysis of the protein and lipid metabolite revealed that both WCF and CCF improved tryptophan degradation and LPS/IL-1-mediated inhibition of RXR function. WCF inhibited RXR function more than CCF via the modulation of LPS/IL-1 in the CRF model. Experimental results were validated by qRT-PCR and western blotting. Notably, the gene expression amount and protein levels of FMO3 and CYP2E1 among 8 genes influenced by WCF were higher compared to CCF. CONCLUSION: The results of this study provide a theoretical basis for further study of Corni Fructus with different processing techniques in CRF. The findings also offer guidance for investigating the mechanism of action of herbal medicines in diseases employing diverse processing techniques.

The mechanisms of action of mitochondrial targeting agents in cancer: inhibiting oxidative phosphorylation and inducing apoptosis.

The tumor microenvironment affects the structure and metabolic function of mitochondria in tumor cells. This process involves changes in metabolic activity, an increase in the amount of reactive oxygen species (ROS) in tumor cells compared to normal cells, the production of more intracellular free radicals, and the activation of oxidative pathways. From a practical perspective, it is advantageous to develop drugs that target mitochondria for the treatment of malignant tumors. Such drugs can enhance the selectivity of treatments for specific cell groups, minimize toxic effects on normal tissues, and improve combinational treatments. Mitochondrial targeting agents typically rely on small molecule medications (such as synthetic small molecules agents, active ingredients of plants, mitochondrial inhibitors or autophagy inhibitors, and others), modified mitochondrial delivery system agents (such as lipophilic cation modification or combining other molecules to form targeted mitochondrial agents), and a few mitochondrial complex inhibitors. This article will review these compounds in three main areas: oxidative phosphorylation (OXPHOS), changes in ROS levels, and endogenous oxidative and apoptotic processes.

Dark-Channel Soft-Constrained and Object-Perception-Enhanced Deep Dehazing Networks Used for Road Inspection Images.

Haze seriously affects the visual quality of road inspection images and contaminates the discrimination of key road objects, which thus hinders the execution of road inspection work. The basic assumptions of the classical dark-channel prior are not suitable for road images containing light-colored lane lines and vehicles, while typical deep dehazing networks lack physical model interpretability, and they focus on global dehazing effects, neglecting the preservation of object features. For this reason, this paper proposes a Dark-Channel Soft-Constrained and Object-Perception-Enhanced Deep Dehazing Network (DCSC-OPE-Net) for the information recovery of road inspection images. The network is divided into two modules: a dark-channel soft-constrained dehazing module and a near-view object-perception-enhanced module. Unlike the traditional dark-channel algorithms that impose strong constraints on dark pixels, a dark-channel soft-constrained loss function is constructed to ensure that the features of light-colored vehicles and lane lines are effectively maintained. To avoid resolution loss due to patch-based dark-channel processing for image dehazing, a resolution enhancement module is used to strengthen the contrast of the dehazed image. To autonomously perceive and enhance key road features to support road inspection, edge enhancement loss combined with a transmission map is embedded into the network to autonomously discover near-view objects and enhance their key features. The experiments utilize public datasets and real road inspection datasets to validate the performance of the proposed DCSC-OPE-Net compared with typical networks using dehazing evaluation metrics and road object recognition metrics. The experimental results demonstrate that the proposed DCSC-OPE-Net can obtain the best dehazing performance, with an NIQE score of 4.5 and a BRISQUE score of 18.67, and obtain the best road object recognition results (i.e., 83.67%) among the comparison methods.

Quantitative Proteomics Characterization of the Effect and Mechanism of Trichostatin A on the Hippocampus of Type II Diabetic Mice.

Diabetic encephalopathy (DE) is one of the complications of diabetes mellitus with mild-to-moderate cognitive impairment. Trichostatin A (TSA) has been revealed to show protective effect on central nervous systems in Alzheimer's disease (AD) and hypoxic-ischemic brain injury. However, the effect and molecular mechanism of TSA on cognitive function of DE are unknown. Here, we demonstrated that cognitive function was damaged in diabetic mice versus normal mice and treatment with TSA improved cognitive function in diabetic mice. Proteomic analysis of the hippocampus revealed 174 differentially expressed proteins in diabetic mice compared with normal mice. TSA treatment reversed the expression levels of 111 differentially expressed proteins grouped into functional clusters, including the longevity regulating pathway, the insulin signaling pathway, peroxisomes, protein processing in the endoplasmic reticulum, and ribosomes. Furthermore, protein-protein interaction network analysis of TSA-reversed proteins revealed that UBA52, CAT, RPL29, RPL35A, CANX, RPL37, and PRKAA2 were the main hub proteins. Multiple KEGG pathway-enriched CAT and PRKAA2 levels were significantly decreased in the hippocampus of diabetic mice versus normal mice, which was reversed by TSA administration. Finally, screening for potential similar or ancillary drugs for TSA treatment indicated that HDAC inhibitors ISOX, apicidin, and panobinostat were the most promising similar drugs, and the PI3K inhibitor GSK-1059615, the Aurora kinase inhibitor alisertib, and the nucleophosmin inhibitor avrainvillamide-analog-6 were the most promising ancillary drugs. In conclusion, our study revealed that CAT and PRKAA2 were the key proteins involved in the improvement of DE after TSA treatment. ISOX, apicidin, and panobinostat were promising similar drugs and that GSK-1059615, alisertib, and avrainvillamide-analog-6 were promising ancillary drugs to TSA in the treatment of DE.

Ultrahigh areal capacity and long cycling stability of sodium metal anodes boosted using a 3D-printed sodiophilic MXene/rGO microlattice aerogel.

Sodium metal has emerged as a highly promising anode material for sodium-based batteries, owing to its intrinsic advantages, including its high theoretical capacity, low working plateau and low cost. However, the uncontrolled formation of sodium dendrites accompanied by unrestricted volume expansion severely limits its application. To tackle these issues, we propose an approach to address these issues by adopting a three-dimensional (3D) structure of Ti3C2Tx/reduced graphene oxide (Ti3C2Tx/rGO) constructed by a direct-ink writing (DIW) 3D printing technique as the Na metal anode host electrode. The combination of the 3D-printed rGO skeleton offering artificial porous structures and the incorporation of sodiophilic Ti3C2Tx nanosheets provides abundant nucleation sites and promotes uniform sodium metal deposition. This specially designed architecture significantly enhances the Na metal cycling stability by effectively inhibiting dendrite formation. The experimental results show that the designed Ti3C2Tx/rGO electrode can achieve a high coulombic efficiency (CE) of 99.91% after 1800 cycles (3600 h) at 2 mA cm-2 with 2 mA h cm-2. Notably, the adopted electrodes exhibit a long life span of more than 1400 h with a high CE over 99.93% when measured with an ultra-high capacity of 50 mA h cm-2 at 5 mA cm-2. Furthermore, a 3D-printed full cell consisting of a Na@Ti3C2Tx/rGO anode and a 3D-printed Na3V2(PO4)3C-rGO (NVP@C-rGO) cathode was successfully demonstrated. This 3D-printed cell could provide a notable capacity of 85.3 mA h g-1 at 100 mA g-1 after 500 cycles. The exceptional electrochemical performance achieved by the 3D-printed full cell paves the way for the development of practical sodium metal anodes.

Improved analysis ZIC-HILIC-HCD-Orbitrap method for mapping the glycopeptide by mass spectrometry.

Glycosylation is one of the most common post-translational modifications (PTMs). Protein glycosylation analysis is the bottleneck to deeply understand their functions. At present, the LC-MS analysis of glycosylated post-translational modification is mainly focused on the analysis of glycopeptides. However, the factors affecting the identification of glycopeptides were not fully elucidated. In the paper, we have carefully studied the factors, e.g., HILIC materials, search engines, protein amount, gradient duration, extraction solution, etc. According to the results, HILIC materials were the most important factors affecting the glycopeptides identification, and the amphoteric sulfoalkyl betaine stationary phase enriched glycopeptides 6-fold more compared to the amphiphilic ion-bonded fully porous spherical silica stationary phase. We explored the influence of the extraction solutions on glycan identification. Comparing sodium dodecyl sulfate (SDS) and urea (UA), the results showed that N-glycolylneuraminic acid (NeuGc) type of glycan content was found to be increased 1.4-fold in the SDS compared to UA. Besides, we explored the influence of the search engine on glycopeptide identification. Comparing pGlyco3.0 and MSFragger-Glyco, it was observed that pGlyco3.0 outperformed MSFragger-Glyco in identifying glycopeptides. Then, using our optimized method we found that there was a significant difference in the distribution of monosaccharide types in plasma and brain tissue, e.g., the content of NeuAc in brain was 5-fold higher than that in plasma. To importantly, two glycoproteins (Neurexin-2 and SUN domain-containing protein 2) were also found for the first time by our method. In summary, we have comprehensively studied the factors influencing glycopeptide identification than any previous research, and the optimized method could be widely used for identifying the glycoproteins or glycolpeptides biomarkers for disease detection and therapeutic targets.

Optimized approach for active peptides identification in Cerebrolysin by nanoLC-MS.

Cerebrolysin (CBL) is a peptide-rich preparation made by hydrolysis and purified extraction of porcine brain. CBL contains various neuroprotective peptides, such as neurotrophic factor, nerve growth factor and ciliary neurotrophic factor, which can be used to treat neurodegenerative diseases. However, the active peptides in CBL had not been studied in depth. In this study, the following was carried out in order to investigate the active peptides in CBL. First, CBL samples were treated using organic reagents (acetonitrile and acetone) to precipitate the proteins and different solid phase extraction methods (MCX mixed-mode cartridges, C18 SPE cartridge columns and HILIC sorbent). Then the samples were analyzed using nanoLC-MS, followed by the identification of peptides using different sequence analysis software (PEAKS, pNovo and novor). Finally, bioinformatics analysis was performed to predict peptides with potential neuroprotective functions in CBL, such as anti-inflammatory and antioxidant peptides. Results showed that the number of peptides obtained by the MCX method coupled with PEAKS was the highest and the method was the most stable. Bioinformatic analysis of the detected peptides showed that two anti-inflammatory peptides (LLNLQPPPR and LSPSLRLP) and an antioxidant peptide (WPFPR) might be neuroprotective peptides in CBL. In addition, this study found that some peptides in CBL were present in myelin basic protein and tubulin beta chain. The results of this study for the detection of active peptides in CBL laid the foundation for the subsequent study of its active ingredients.

Longevous Sodium Metal Anodes with High Areal Capacity Enabled by 3D-Printed Sodiophilic Monoliths.

Sodium metal anode, featured by favorable redox voltage and material availability, offers a feasible avenue toward high-energy-density devices. However, uneven metal deposition and notorious dendrite proliferation synchronously hamper its broad application prospects. Here, a three-dimensional (3D) porous hierarchical silver/reduced graphene oxide (Ag/rGO) microlattice aerogel is devised as a sodiophilic monolith, which is realized by a direct ink writing 3D printing technology. The thus-printed Na@Ag/rGO electrode retains a durable cycling lifespan over 3100 h at 3.0 mA cm-2/1.0 mAh cm-2, concurrently harvesting a high average Coulombic efficiency of 99.80%. Impressively, it can be cycled for 340 h at a stringent condition of 6.0 mA cm-2 with a large areal capacity of 60.0 mAh cm-2 (∼1036.31 mAh g-1). Meanwhile, the well-regulated Na ion flux and uniform deposition kinetics are systematically probed by comprehensive electroanalytical analysis and theoretical simulations. As a result, assembled Na metal full battery delivers a long cycling sustainability over 500 cycles at 100 mA g-1 with a low per-cycle decay of 0.85%. The proposed strategy might inspire the construction of high-capacity Na metal anodes with appealing stability.