RESUMEN
The gasification of carbon with O2, CO2, and H2O oxidants plays an important role in several energy-based applications. As most of the industrial gasification processes are conducted under mixed-atmosphere conditions, the oxidation of carbon in binary oxidant mixtures becomes crucially important. Using reactive force-field (ReaxFF) potentials, extensive MD simulations were carried out on the oxidation behavior of graphene in mixed O2/H2O and O2/CO2 environments for a range of gas compositions and temperatures. A graphene sheet with a line defect comprising of eight and four-membered rings was used as the starting carbon structure. In addition to enhanced carbon gasification with oxygen additions, MD simulations showed synergistic interactions between different oxidants and their net influence on the overall reactivities. The gasification levels achieved under the binary system were higher than the linear combination of contributions from individual oxidants. The addition of â¼40% O2 in the binary mix was identified as the region with the highest reactivity during the initial stages of gasification. The oxidation reactions with oxygen were found to start instantaneously in the presence of H2O or CO2 instead of the usual initial delay. A very fast reaction kinetics was also observed in the initial stages in the presence of oxygen. Our results show that the gasification reactions under H2O and CO2 started at lower temperatures than O2 thereby creating a partially oxidized structure. Due to the presence of a large number of activation sites, very high rates of gasification were achieved with oxygen. These findings could help identify optimal oxidant compositions towards maximizing carbon gasification and minimizing CO2 emissions.
RESUMEN
The xerogels based on the aqueous solutions of urea in potassium silicate liquid glass (PSLG) were produced by CO2 bubbling and investigated. The structure and chemical composition of the obtained materials were analyzed. Using the SEM, XRD, IR-FT, DSC, and low energy local EDS analysis, it was recognized that the dried gels (xerogels) contained three forms of urea: oval crystals of regular shape appeared onto the surface of xerogel particles; fibrous crystals were located in the silicate matrix; and molecules/ions were incorporated into the silicate matrix. It was shown that an increase in [(NH2)2CO] in the gel-forming system promoted increased contents in crystalline forms of urea as well as the diameter of the fiber-shaped urea crystals. A rate of the urea release in water from the granulated xerogels containing 5.8, 12.6, and 17.9 wt.% of urea was determined by the photometric method. It was determined that the obtained urea-containing xerogels were characterized with a slow release of urea, which continued up to 120 days, and could be used as controlled release fertilizers containing useful nutrients (N, K).
