Transition in Dynamics as Nanoparticles Jam at the Liquid/Liquid Interface.

Nanoparticles (NPs) segregated to the liquid/liquid interface form disordered or liquid-like assemblies that show diffusive motions in the plane of the interface. As the areal density of NPs at the interface increases, the available interfacial area decreases, and the interfacial dynamics of the NP assemblies change when the NPs jam. Dynamics associated with jamming was investigated by X-ray photon correlation spectroscopy. Water-in-toluene emulsions, formed by a self-emulsification at the liquid/liquid interface and stabilized by ligand-capped CdSe-ZnS NPs, provided a simple, yet powerful platform, to investigate NP dynamics. In contrast to a single planar interface, these emulsions increased the number of NPs in the incident beam and decreased the absorption of X-rays in comparison to the same path length in pure water. A transition from diffusive to confined dynamics was manifested by intermittent dynamics, indicating a transition from a liquid-like to a jammed state.

Surface-Anchored Thiol-Reactive Soft Interfaces: Engineering Effective Platforms for Biomolecular Immobilization and Sensing.

Fabrication of antibiofouling, specifically reactive polymeric coatings that undergo facile functionalization with thiol-bearing small molecules and ligands, yields effective platforms for biomolecular immobilization and sensing. Poly(ethylene glycol) (PEG)-based copolymers containing alkoxysilyl groups to enable surface-anchoring and furan-protected maleimide groups as latent thiol-reactive moieties as side-chains were synthesized. Reactive interfaces were obtained by coating these copolymers onto Si/SiO2 or glass surfaces and activating the maleimide groups to their thiol-reactive forms via thermal treatment. A series of surfaces modified with copolymers containing varying amounts of maleimide groups were synthesized. Effectiveness of surface modification was probed using Fourier transform infrared spectroscopy, contact angle goniometry, ellipsometry and X-ray photoelectron spectroscopy. Facile surface modification through thiol-maleimide conjugation was established by attachment of a thiol-containing fluorescent dye, namely BODIPY-SH. It was demonstrated that these surfaces allow spatially localized modification through microcontact printing. Importantly, the extent of surface modification could be tuned by varying the initial composition of the copolymer used for coating. Using fluorescence microscopy, it was observed that increasing amount of fluorescent dye was attached onto surfaces fabricated with copolymers with increasing amount of masked maleimide groups. Thereafter, the thiol-maleimide conjugation was utilized to decorate these surfaces with biotin, a protein-binding ligand. It was observed that though these biotinylated surfaces were able to bind Streptavidin effectively, some nonspecific binding was observed on places that were not in conformal contact with the stamp during microcontact printing. This nonspecific binding was eliminated upon neutralizing the residual maleimide units on the printed surface using thiol-containing PEG. Notably, fluorescence analysis of Streptavidin immobilized onto biotinylated surfaces fabricated using varying amounts of maleimide demonstrated that the amount of immobilized protein could be tuned by varying surface composition. It can be envisioned that facile fabrication of these maleimide-containing polymeric surfaces, their effective functionalization in a tunable manner to engineer interfaces for effective immobilization or sensing of biomolecules in a spatially controlled manner would make them attractive candidates for various biotechnological applications.

Robust Gold Nanoparticle Sheets by Ligand Cross-Linking at the Air-Water Interface.

We report the results of cross-linking of two-dimensional gold nanoparticle (Au-NP) assemblies at the air-water interface in situ. We introduce an aqueous soluble ruthenium benzylidene catalyst into the water subphase to generate a robust, elastic two-dimensional network of nanoparticles containing cyclic olefins in their ligand framework. The most striking feature of the cross-linked Au-NP assemblies is that the extended connectivity of the nanoparticles enables the film to preserve much of its integrity under compression and expansion, features that are absent in its non-cross-linked counterparts. The cross-linking process appears to "stitch" the nanoparticle crystalline domains together, allowing the cross-linked monolayers to behave like a piece of fabric under lateral compression.

Underwater Superoleophobic Surfaces Prepared from Polymer Zwitterion/Dopamine Composite Coatings.

Hydration is central to mitigating surface fouling by oil and microorganisms. Immobilization of hydrophilic polymers on surfaces promotes retention of water and a reduction of direct interactions with potential foulants. While conventional surface modification techniques are surface-specific, mussel-inspired adhesives based on dopamine effectively coat many types of surfaces and thus hold potential as a universal solution to surface modification. Here, we describe a facile, one-step surface modification strategy that affords hydrophilic, and underwater superoleophobic, coatings by the simultaneous deposition of polydopamine (PDA) with poly(methacryloyloxyethyl phosphorylcholine) (polyMPC). The resultant composite coating features enhanced hydrophilicity (i.e., water contact angle of ~10° in air) and antifouling performance relative to PDA coatings. PolyMPC affords control over coating thickness and surface roughness, and results in a nearly 10 fold reduction in Escherichia coli adhesion relative to unmodified glass. The substrate-independent nature of PDA coatings further promotes facile surface modification without tedious surface pretreatment, and offers a robust template for codepositing polyMPC to enhance biocompatibility, hydrophilicity and fouling resistance.

Design and Synthesis of Water-Soluble Multifunctionalizable Thiol-Reactive Polymeric Supports for Cellular Targeting.

Design and synthesis of novel water-soluble polymers bearing reactive side chains are actively pursued due to their increasing demand in areas such as bioconjugation and drug delivery. This study reports the fabrication of poly(ethylene glycol) methacrylate based thiol-reactive water-soluble polymeric supports that can serve as targeted drug delivery vehicles. Thiol-reactive maleimide units were incorporated into polymers as side chains by use of a furan-protected maleimide containing monomer. Atom transfer radical polymerization (ATRP) was employed to obtain a family of well-defined copolymers with narrow molecular weight distributions. After the polymerization, the maleimide groups were activated to their reactive form, ready for conjugation with thiol-containing molecules. Efficient functionalization of the maleimide moieties was demonstrated by conjugation of a tripeptide glutathione under mild and reagent-free aqueous conditions. Additionally, hydrophobic thiol-containing dye (Bodipy-SH) and a cyclic peptide-based targeting group (cRGDfC) were sequentially appended onto the maleimide bearing polymers to demonstrate their efficient multifunctionalization. The conjugates were utilized for in vitro experiments over both cancerous and healthy breast cell lines. Obtained results demonstrate that the conjugates were nontoxic, and displayed efficient cellular uptake. The presence of the peptide based targeting group had a clear effect on increasing the uptake of the dye-conjugated polymers into cells when compared to the construct devoid of the peptide. Overall, the facile synthesis and highly efficient multifunctionalization of maleimide-containing thiol-reactive copolymers offer a novel and attractive class of polyethylene glycol-based water-soluble supports for drug delivery.

Demonstration of feasibility of X-ray free electron laser studies of dynamics of nanoparticles in entangled polymer melts.

The recent advent of hard x-ray free electron lasers (XFELs) opens new areas of science due to their exceptional brightness, coherence, and time structure. In principle, such sources enable studies of dynamics of condensed matter systems over times ranging from femtoseconds to seconds. However, the studies of "slow" dynamics in polymeric materials still remain in question due to the characteristics of the XFEL beam and concerns about sample damage. Here we demonstrate the feasibility of measuring the relaxation dynamics of gold nanoparticles suspended in polymer melts using X-ray photon correlation spectroscopy (XPCS), while also monitoring eventual X-ray induced damage. In spite of inherently large pulse-to-pulse intensity and position variations of the XFEL beam, measurements can be realized at slow time scales. The X-ray induced damage and heating are less than initially expected for soft matter materials.

Disulfide cross-linked phosphorylcholine micelles for triggered release of camptothecin.

A series of block copolymers based on 2-methacryloyloxyethyl phosphorylcholine (MPC) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Incorporation of dihydrolipoic acid (DHLA) into the hydrophobic block led to formation of block copolymer micelles in water. The micelles were between 15 and 30 nm in diameter, as characterized by dynamic light scattering (DLS), with some size control achieved by adjusting the hydrophobic/hydrophilic balance. Cross-linked micelles were prepared by disulfide formation, and observed to be stable in solution for weeks. The micelles proved amenable to disassembly when treated with a reducing agent, such as dithiothreitol (DTT), and represent a potential delivery platform for chemotherapeutic agents. As a proof-of-concept, camptothecin (CPT) was conjugated to the polymer scaffold through a disulfide linkage, and release of the drug from the micelle was monitored by fluorescence spectroscopy. These CPT-loaded prodrug micelles showed a reduction in release rate compared to physically encapsulated CPT. The use of disulfide conjugation facilitated drug release under reducing conditions, with a half-life (t1/2) of 5.5 h in the presence of 3 mM DTT, compared to 28 h in PBS. The toxicity of the micellar prodrugs was evaluated in cell culture against human breast (MCF7) and colorectal (COLO205) cancer cell lines.