RESUMEN
Aim: To find a practical biomonitoring method for researchers exposed to nanoparticles causing oxidative stress. Methods: In a continuation of a study in 2016-2018, biological samples (plasma, urine and exhaled breath condensate [EBC]) were collected in 2019-2020 from 43 researchers (13.8 ± 3.0 years of exposure) and 45 controls. Antioxidant status was assessed using glutathione (GSH) and ferric-reducing antioxidant power, while oxidative stress was measured as thiobarbituric acid reactive substances, all using spectrophotometric methods. Researchers' personal nanoparticle exposure was monitored. Results: Plasma GSH was elevated in researchers both before and after exposure (p < 0.01); postexposure plasma GSH correlated with nanoparticle exposure, and GSH in EBC increased. Conclusion: The results suggest adaptation to chronic exposure to nanoparticles, as monitored by plasma and EBC GSH.
What is this study about? Identifying markers of oxidative stress and/or adaptation to oxidation stress could offer tools for monitoring exposure to nanoparticles in exposed researchers. In this study, we question whether these markers correlate with their personal exposure during the shift. What were the results? We found that exposure to nanoparticles correlated with the antioxidant marker glutathione, which is higher in workers who are already pre-exposed. What do the results mean? This study suggests that the researchers have adapted to nanoparticle exposure and are ready to combat oxidative stress. However, the similarity with increased markers of oxidative stress from asbestos and silica exposure, including nucleic acid oxidation, previously found in these researchers highlights the need for further research in this area to better understand and prevent potential future effects.
Asunto(s)
Antioxidantes , Nanopartículas , Estrés Oxidativo , Glutatión , Sustancias Reactivas al Ácido Tiobarbitúrico , Pruebas Respiratorias/métodos , Biomarcadores/metabolismoRESUMEN
Graphitic carbon nitride (C3N4) was synthesised from melamine at 550 °C for 4 h in the argon atmosphere and then was reheated for 1-3 h at 500 °C in argon. Two band gaps of 2.04 eV and 2.47 eV were observed in all the synthetized materials. Based on the results of elemental and photoluminescence analyses, the lower band gap was found to be caused by the formation of vacancies. Specific surface areas of the synthetized materials were 15-18 m2g-1 indicating that no thermal exfoliation occurred. The photocatalytic activity of these materials was tested for hydrogen generation. The best photocatalyst showed 3 times higher performance (1547 µmol/g) than bulk C3N4 synthetized in the air (547 µmol/g). This higher activity was explained by the presence of carbon (VC) and nitrogen (VN) vacancies grouped in their big complexes 2VC + 2VN (observed by positron annihilation spectroscopy). The effect of an inert gas on the synthesis of C3N4 was demonstrated using Graham´s law of ammonia diffusion. This study showed that the synthesis of C3N4 from nitrogen-rich precursors in the argon atmosphere led to the formation of vacancy complexes beneficial for hydrogen generation, which was not referred so far.
RESUMEN
In spite of advanced research on functional colloidal inorganic nanoparticles and their reactivity, room temperature reactive interactions between two different colloids have remained challenging so far. Laser ablation of titanium monoxide and silicon monoxide in ethanol and water allows the generation of TiO-derived and SiO-derived colloidal nanoparticles which were characterized for their stability, size distribution and zeta potentials with dynamic light scattering and after evaporation of solvent examined for their morphology, chemical and phase composition by scanning electron microscopy, Raman spectroscopy, high resolution transmission electron microscopy and electron diffraction and small angle X-ray scattering. Aqueous and ethanolic TiO-derived colloids consist of anatase and monoclinic TiO, while ethanolic SiO-derived colloids are composed of crystalline and amorphous Si, nanocrystalline Si and SiO2 and aqueous SiO-derived colloids contain, in addition to these phases, a high pressure form of cristobalite. Simple room temperature mixing of ethanolic TiO- and SiO-derived colloids allows the formation of TiSi2, which is a case of so far unreported room temperature reactive interactions between two colloidal species. All colloids absorb solar light and act as photocatalysts for methylene blue degradation. These findings present a challenge for further search for feasible room-temperature reactions between distinct colloidal particles and open the potential for green synthesis of other desirable and hardly achievable phases.
RESUMEN
The aim of this work was to develop a novel method for the preparation of structured Co-Mn mixed oxide catalysts: deposition on stainless steel meshes by hydrothermal synthesis. The use of meshes enabled the deposition of a thin layer of the active phase, which significantly suppressed the influence of internal diffusion. Consequently, the prepared catalysts exhibited from 48 to 114 times higher catalytic activity in ethanol oxidation than the commercial pelleted Co-Mn-Al catalyst. Moreover, we have shown that their catalytic activity correlated with the proportion of surface oxygen vacancies determined by XPS. Finally, the outstanding activity of the catalyst with Co:Mn ratio of 0.5 was ascribed to the mutual effect of high number of oxygen vacancies and exceptional redox properties.
Asunto(s)
Óxidos , Compuestos Orgánicos Volátiles , Catálisis , Oxidación-Reducción , Acero InoxidableRESUMEN
Graphitic carbon nitride (CN) synthetized by the thermal polycondensation of melamine at 550 °C for 4 h was further exfoliated by heating at 500 °C for 3 h. Silver cations were adsorbed on the exfoliated graphitic carbon nitride (CNE) and then reduced by sodium borohydride forming silver nanoclusters (NCs) with a size of less than 1 nm. The NCs were located on the CNE surface and did not change the CNE properties except for its pore size distribution and thereby specific surface area (SSA). The Ag NCs were able to collect the photoinduced electrons of CNE and thus reduce their recombination with the holes. It was also documented by the increase in the CNE photocatalytic activity in terms of the degradation of antibiotic Ofloxacin. This study demonstrates the ability of CNE to serve as a platform for a simple and fast synthesis of Ag NCs without any stabilizing compounds.
RESUMEN
Glucose belongs among the most important substances in both physiology and industry. Current food and biotechnology praxis emphasizes its on-line continuous monitoring and regulation. These provoke increasing demand for systems, which enable fast detection and regulation of deviations from desired glucose concentration. We demonstrated control of glucose concentration by feedback regulation equipped with in situ optical fiber glucose sensor. The sensitive layer of the sensor comprises oxygen-dependent ruthenium complex and preimmobilized glucose oxidase both entrapped in organic-inorganic polymer ORMOCER®. The sensor was placed in the laboratory bioreactor (volume 5 L) to demonstrate both regulations: the control of low levels of glucose concentrations (0.4 and 0.1 mM) and maintenance of the glucose concentration (between 2 and 3.5 mM) during stationary phase of cultivation of Saccharomyces cerevisiae. Response times did not exceed 6 min (average 4 min) with average deviation of 4%. Due to these regulation characteristics together with durable and long-lasting (≥2 month) sensitive layer, this feedback regulation system might find applications in various biotechnological processes such as production of low glucose content beverages.
Asunto(s)
Saccharomyces cerevisiae , Retroalimentación , Glucosa , Glucosa Oxidasa , Fibras ÓpticasRESUMEN
Chemical vapor deposition was applied to synthetize nanostructured deposits containing several sorts of nanoobjects (i.e., nanoballs, irregular particles, and nanowires). Analytical techniques, that is, high-resolution transmission electron microscopy, scanning electron microscopy, electron dispersive X-ray analysis, selected area electron diffraction, and X-ray photoelectron spectroscopy, showed that unlike nanoballs and particles composed of crystalline germanium, the layer was made of chromium germanide CrGe x . The nanowires possessed a complex structure, namely a thin crystalline germanium core and amorphous CrGe x coating. The composition of the nanowire coating was [Cr]/[Ge] = 1:(6-7). The resistance of the nanowire-deposit system was estimated to be 2.7 kΩ·cm using an unique vacuum contacting system.
RESUMEN
Human data concerning exposure to nanoparticles are very limited, and biomarkers for monitoring exposure are urgently needed. In a follow-up of a 2016 study in a nanocomposites plant, in which only exhaled breath condensate (EBC) was examined, eight markers of oxidative stress were analyzed in three bodily fluids, i.e., EBC, plasma and urine, in both pre-shift and post-shift samples in 2017 and 2018. Aerosol exposures were monitored. Mass concentration in 2017 was 0.351 mg/m3 during machining, and 0.179 and 0.217 mg/m3 during machining and welding, respectively, in 2018. In number concentrations, nanoparticles formed 96%, 90% and 59%, respectively. In both years, pre-shift elevations of 50.0% in EBC, 37.5% in plasma and 6.25% in urine biomarkers were observed. Post-shift elevation reached 62.5% in EBC, 68.8% in plasma and 18.8% in urine samples. The same trend was observed in all biological fluids. Individual factors were responsible for the elevation of control subjects' afternoon vs. morning markers in 2018; all were significantly lower compared to those of workers. Malondialdehyde levels were always acutely shifted, and 8-hydroxy-2-deoxyguanosine levels best showed chronic exposure effect. EBC and plasma analysis appear to be the ideal fluids for bio-monitoring of oxidative stress arising from engineered nanomaterials. Potential late effects need to be targeted and prevented, as there is a similarity of EBC findings in patients with silicosis and asbestosis.
RESUMEN
A pulsed Nd : YAG laser ablation of FeS in water and ethanol produces FeS-derived colloidal nanoparticles that absorb onto immersed porous ceramic substrates and create solar-light photocatalytic surfaces. The stability, size distribution and zeta potential of the nanoparticles were assessed by dynamic light scattering. Raman, UV-Vis and XP spectroscopy and electron microscopy reveal that the sol nanoparticles have their outmost layer composed of ferrous and ferric sulphates and those produced in water are made of high-pressure orthorhombic FeS, cubic magnetite Fe3O4 and tetragonal maghemite γ-Fe2O3, while those formed in ethanol contain hexagonal FeS and cubic magnetite Fe3O4. Both colloids absorb solar light and their adsorption to porous ceramic surfaces creates functionalized ceramic surfaces that induce methylene blue degradation by daylight. The laser induced process thus offers an easy and efficient way for the functionalization of porous surfaces by photocatalytic nanoparticles that avoids aggregation in the liquid phase. The formation of an orthorhombic high-pressure FeS phase stable under ambient conditions is the first example of high-pressure structures produced by laser ablation in liquid without the assistance of an electric field.
RESUMEN
The risk of exposure to nanoparticles (NPs) has rapidly increased during the last decade due to the vast use of nanomaterials (NMs) in many areas of human life. Despite this fact, human biomonitoring studies focused on the effect of NP exposure on DNA alterations are still rare. Furthermore, there are virtually no epigenetic data available. In this study, we investigated global and gene-specific DNA methylation profiles in a group of 20 long-term (mean 14.5 years) exposed, nanocomposite, research workers and in 20 controls. Both groups were sampled twice/day (pre-shift and post-shift) in September 2018. We applied Infinium Methylation Assay, using the Infinium MethylationEPIC BeadChips with more than 850,000 CpG loci, for identification of the DNA methylation pattern in the studied groups. Aerosol exposure monitoring, including two nanosized fractions, was also performed as proof of acute NP exposure. The obtained array data showed significant differences in methylation between the exposed and control groups related to long-term exposure, specifically 341 CpG loci were hypomethylated and 364 hypermethylated. The most significant CpG differences were mainly detected in genes involved in lipid metabolism, the immune system, lung functions, signaling pathways, cancer development and xenobiotic detoxification. In contrast, short-term acute NP exposure was not accompanied by DNA methylation changes. In summary, long-term (years) exposure to NP is associated with DNA epigenetic alterations.
Asunto(s)
Metilación de ADN/efectos de los fármacos , Nanopartículas/efectos adversos , Exposición Profesional , Adulto , Anciano , Epigénesis Genética , Femenino , Genoma Humano , Humanos , Masculino , Persona de Mediana Edad , Nanocompuestos/efectos adversos , Adulto JovenRESUMEN
Magnetron sputtering was employed for the deposition of cobalt oxide thin films on stainless steel meshes. Catalysts prepared by sputtering in inert and oxidation atmosphere were compared with those obtained by electrochemical deposition and hydrothermal synthesis. Systematic characterization using X-ray diffraction, scanning electron microscopy, N2 physisorption, infrared spectroscopy, Raman spectroscopy, and temperature-programmed reduction by hydrogen allowed detailed monitoring of their physicochemical properties. Ethanol gas-phase oxidation was employed as a model reaction to reveal the catalytic performance of the catalysts. It was shown that the catalyst prepared by magnetron sputtering in oxidation atmosphere exhibited the best mechanical stability among all studied catalysts. Moreover, its catalytic activity was 18 times higher than that of pelletized commercial cobalt oxide.
Asunto(s)
Cobalto , Óxidos , Compuestos Orgánicos Volátiles , CatálisisRESUMEN
The application of nanomaterials has been rapidly increasing during recent years. Inhalation exposure to nanoparticles (NP) may result in negative toxic effects but there is a critical lack of human studies, especially those related to possible DNA alterations. We analyzed pre-shift and post-shift a group of nanocomposite researchers with a long-term working background (17.8 ± 10.0 years) and matched controls. The study group consisted of 73.2% males and 26.8% females. Aerosol exposure monitoring during a working shift (involving welding, smelting, machining) to assess the differences in exposure to particulate matter (PM) including nanosized fractions <25-100 nm, and their chemical analysis, was carried out. A micronucleus assay using Human Pan Centromeric probes, was applied to distinguish between the frequency of centromere positive (CEN+) and centromere negative (CEN-) micronuclei (MN) in the binucleated cells. This approach allowed recognition of the types of chromosomal damage: losses and breaks. The monitoring data revealed differences in the exposure to NP related to individual working processes, and in the chemical composition of nanofraction. The cytogenetic results of this pilot study demonstrated a lack of effect of long-term (years) exposure to NP (total frequency of MN, P = 0.743), although this exposure may be responsible for DNA damage pattern changes (12% increase of chromosomal breaks-clastogenic effect). Moreover, short-term (daily shift) exposure could be a reason for the increase of chromosomal breaks in a subgroup of researchers involved in welding and smelting processes (clastogenic effect, P = 0.037). The gender and/or gender ratio of the study participants was also an important factor for the interpretation of the results. As this type of human study is unique, further research is needed to understand the effects of long-term and short-term exposure to NP.
Asunto(s)
Análisis Citogenético , Nanopartículas , Exposición Profesional , Material Particulado , Adulto , Análisis Citogenético/métodos , Femenino , Humanos , Masculino , Pruebas de Micronúcleos/métodos , Persona de Mediana Edad , Mutágenos/efectos adversos , Exposición Profesional/efectos adversos , Material Particulado/efectos adversos , Proyectos Piloto , Adulto JovenRESUMEN
The aim of this study was to ascertain whether long-term occupational exposure to nanoparticles would affect relative leukocyte telomere length (LrTL). We analysed occupational exposure to size-resolved aerosol particles, with special emphasis on nanoparticles at two workshops: i/ the production of nanocomposites containing metal oxides; ii/ laboratory to test experimental exposure of nano-CuO to rodents. Thirty five exposed researchers (age 39.5 ± 12.6â yr; exposure duration 6.0 ± 3.7â yr) and 43 controls (40.4 ± 10.5â yr) were examined. LrTL did not significantly (p=0.14) differ between the exposed researchers (0.92 ± 0.13) and controls (0.86 ± 0.15). In addition, no significant correlation (r=-0.22, p=0.22) was detected between the duration of occupational exposure and LrTL. The results remained non-significant after multiple adjustments for age, sex and smoking status. Our pilot results suggest that relative leukocyte telomere length is not affected by occupational exposure to nanoparticles.
Asunto(s)
Nanopartículas del Metal/efectos adversos , Exposición Profesional/efectos adversos , Investigadores , Acortamiento del Telómero/efectos de los fármacos , Adulto , Contaminantes Ocupacionales del Aire/efectos adversos , República Checa/epidemiología , Femenino , Humanos , Leucocitos , Masculino , Persona de Mediana Edad , ÓxidosRESUMEN
Thousands of researchers and workers worldwide are employed in nanocomposites manufacturing, yet little is known about their respiratory health. Aerosol exposures were characterized using real time and integrated instruments. Aerosol mass concentration ranged from 0.120 mg/m³ to 1.840 mg/m³ during nanocomposite machining processes; median particle number concentration ranged from 4.8 × 104 to 5.4 × 105 particles/cm³. The proportion of nanoparticles varied by process from 40 to 95%. Twenty employees, working in nanocomposite materials research were examined pre-shift and post-shift using spirometry and fractional exhaled nitric oxide (FeNO) in parallel with 21 controls. Pro-inflammatory leukotrienes (LT) type B4, C4, D4, and E4; tumor necrosis factor (TNF); interleukins; and anti-inflammatory lipoxins (LXA4 and LXB4) were analyzed in their exhaled breath condensate (EBC). Chronic bronchitis was present in 20% of researchers, but not in controls. A significant decrease in forced expiratory volume in 1 s (FEV1) and FEV1/forced vital capacity (FVC) was found in researchers post-shift (p Ë 0.05). Post-shift EBC samples were higher for TNF (p Ë 0.001), LTB4 (p Ë 0.001), and LTE4 (p Ë 0.01) compared with controls. Nanocomposites production was associated with LTB4 (p Ë 0.001), LTE4 (p Ë 0.05), and TNF (p Ë 0.001), in addition to pre-shift LTD4 and LXB4 (both p Ë 0.05). Spirometry documented minor, but significant, post-shift lung impairment. TNF and LTB4 were the most robust markers of biological effects. Proper ventilation and respiratory protection are required during nanocomposites processing.
RESUMEN
Researchers in nanocomposite processing may inhale a variety of chemical agents, including nanoparticles. This study investigated airway oxidative stress status in the exhaled breath condensate (EBC). Nineteen employees (42.4 ± 11.4 y/o), working in nanocomposites research for 18.0 ± 10.3 years were examined pre-shift and post-shift on a random workday, together with nineteen controls (45.5 ± 11.7 y/o). Panels of oxidative stress biomarkers derived from lipids, nucleic acids, and proteins were analyzed in the EBC. Aerosol exposures were monitored during three major nanoparticle generation operations: smelting and welding (workshop 1) and nanocomposite machining (workshop 2) using a suite of real-time and integrated instruments. Mass concentrations during these operations were 0.120, 1.840, and 0.804 mg/m³, respectively. Median particle number concentrations were 4.8 × 104, 1.3 × 105, and 5.4 × 105 particles/cm³, respectively. Nanoparticles accounted for 95, 40, and 61%, respectively, with prevailing Fe and Mn. All markers of nucleic acid and protein oxidation, malondialdehyde, and aldehydes C6â»C13 were elevated, already in the pre-shift samples relative to controls in both workshops. Significant post-shift elevations were documented in lipid oxidation markers. Significant associations were found between working in nanocomposite synthesis and EBC biomarkers. More research is needed to understand the contribution of nanoparticles from nanocomposite processing in inducing oxidative stress, relative to other co-exposures generated during welding, smelting, and secondary oxidation processes, in these workshops.
RESUMEN
Cell wall envelopes treated with sodium hydroxide and spray-dried were used as mercury sorbents. The sorbent having sorption capacity 17.7 ± 0.1 µmol/g determined was employed for preconcentration of mercury containing 1-10 ng/L. After preconcentration, bioavailable mercury was detected in samples of soil, stream, and tap water via induction of bioluminescence of E. coli ARL1. Iron and manganese at concentrations of tenth microgram per liter interfered bioluminescence detection of mercury. In tap water was detected semiquantitatively 0.127 ± 0.1 nmol/L by the induction of bioluminescence of E. coli ARL1 in medium with tryptone after preconcentration using a method of standard addition.