Carbene Complexes of Plutonium: Structure, Bonding, and Divergent Reactivity to Lanthanide Analogs.

Organoplutonium chemistry was established in 1965, yet structurally authenticated plutonium-carbon bonds remain rare being limited to π-bonded carbocycle and σ-bonded isonitrile and hydrocarbyl derivatives. Thus, plutonium-carbenes, including alkylidenes and N-heterocyclic carbenes (NHCs), are unknown. Here, we report the preparation and characterization of the diphosphoniomethanide-plutonium complex [Pu(BIPMTMSH)(I)(µ-I)]2 (1Pu, BIPMTMSH = (Me3SiNPPh2)2CH) and the diphosphonioalkylidene-plutonium complexes [Pu(BIPMTMS)(I)(DME)] (2Pu, BIPMTMS = (Me3SiNPPh2)2C) and [Pu(BIPMTMS)(I)(IMe4)2] (3Pu, IMe4 = C(NMeCMe)2), thus disclosing non-actinyl transneptunium multiple bonds and transneptunium NHC complexes. These Pu-C double and dative bonds, along with cerium, praseodymium, samarium, uranium, and neptunium congeners, enable lanthanide-actinide and actinide-actinide comparisons between metals with similar ionic radii and isoelectronic 4f5 vs 5f5 electron-counts within conserved ligand fields over 12 complexes. Quantum chemical calculations reveal that the orbital-energy and spatial-overlap terms increase from uranium to neptunium; however, on moving to plutonium the orbital-energy matching improves but the spatial overlap decreases. The bonding picture that emerges is more complex than the traditional picture of the bonding of lanthanides being ionic and early actinides being more covalent but becoming more ionic left to right. Multiconfigurational calculations on 2M and 3M (M = Pu, Sm) account for the considerably more complex UV/vis/NIR spectra for 5f5 2Pu and 3Pu compared to 4f5 2Sm and 3Sm. Supporting the presence of Pu═C double bonds in 2Pu and 3Pu, 2Pu exhibits metallo-Wittig bond metathesis involving the highest atomic number element to date, reacting with benzaldehyde to produce the alkene PhC(H)═C(PPh2NSiMe3)2 (4) and "PuOI". In contrast, 2Ce and 2Pr do not react with benzaldehyde to produce 4.

Advances in heavy alkaline earth chemistry provide insight into complexation of weakly polarizing Ra2+, Ba2+, and Sr2+ cations.

Numerous technologies-with catalytic, therapeutic, and diagnostic applications-would benefit from improved chelation strategies for heavy alkaline earth elements: Ra2+, Ba2+, and Sr2+. Unfortunately, chelating these metals is challenging because of their large size and weak polarizing power. We found 18-crown-6-tetracarboxylic acid (H4COCO) bound Ra2+, Ba2+, and Sr2+ to form M(HxCOCO)x-2. Upon isolating radioactive 223Ra from its parent radionuclides (227Ac and 227Th), 223Ra2+ reacted with the fully deprotonated COCO4- chelator to generate Ra(COCO)2-(aq) (log KRa(COCO)2- = 5.97 ± 0.01), a rare example of a molecular radium complex. Comparative analyses with Sr2+ and Ba2+ congeners informed on what attributes engendered success in heavy alkaline earth complexation. Chelators with high negative charge [-4 for Ra(COCO)2-(aq)] and many donor atoms [≥11 in Ra(COCO)2-(aq)] provided a framework for stable complex formation. These conditions achieved steric saturation and overcame the weak polarization powers associated with these large dicationic metals.

Synthesis and Characterization of Cerium-Oxo Clusters Capped by Acetylacetonate.

Cerium-oxo clusters have applications in fields ranging from catalysis to electronics and also hold the potential to inform on aspects of actinide chemistry. Toward this end, a cerium-acetylacetonate (acac1-) monomeric molecule, Ce(acac)4 (Ce-1), and two acac1--decorated cerium-oxo clusters, [Ce10O8(acac)14(CH3O)6(CH3OH)2]·10.5MeOH (Ce-10) and [Ce12O12(OH)4(acac)16(CH3COO)2]·6(CH3CN) (Ce-12), were prepared and structurally characterized. The Ce(acac)4 monomer contains CeIV. Crystallographic data and bond valence summation values for the Ce-10 and Ce-12 clusters are consistent with both clusters having a mixture of CeIII and CeIV cations. Ce L3-edge X-ray absorption spectroscopy, performed on Ce-10, showed contributions from both CeIII and CeIV. The Ce-10 cluster is built from a hexameric cluster, with six CeIV sites, that is capped by two dimeric CeIII units. By comparison, Ce-12, which formed upon dissolution of Ce-10 in acetonitrile, consists of a central decamer built from edge sharing CeIV hexameric units, and two monomeric CeIII sites that are bound on the outer corners of the inner Ce10 core. Electrospray ionization mass spectrometry data for solutions prepared by dissolving Ce-10 in acetonitrile showed that the major ions could be attributed to Ce10 clusters that differed primarily in the number of acac1-, OH1-, MeO1-, and O2- ligands. Small angle X-ray scattering measurements for Ce-10 dissolved in acetonitrile showed structural units slightly larger than either Ce10 or Ce12 in solution, likely due to aggregation. Taken together, these results suggest that the acetylacetonate supported clusters can support diverse solution-phase speciation in organic solutions that could lead to stabilization of higher order cerium containing clusters, such as cluster sizes that are greater than the Ce10 and Ce12 reported herein.

Influence of Linker Identity on the Photochemistry of Uranyl-Organic Frameworks.

While uranyl-based metal-organic frameworks (MOFs) boast impressive photocatalytic abilities, significant questions remain regarding their excitation pathways and methods to fine-tune their performance due to the lack of information regarding heterogeneous uranyl catalysis. Herein, we investigated how linker identity and photoexcitation impact uranyl photocatalysis when the uranyl coordination environment remains constant. Toward this end, we prepared three uranyl-based MOFs (NU-1301, NU-1307, and ZnTCPP-U2) and then examined the structural and photochemical properties of each through X-ray diffraction, X-ray absorption, and photoluminescence. We then correlated our observations to the photocatalytic performance for fluorination of cyclooctane. The excitation profile from NU-1301 and NU-1307 exhibited spin-forbidden linker transitions and uranyl vibronic progressions, with uranyl excitation and emission being most dominant in NU-1301. Consequently, NU-1301 was a more active photocatalyst than NU-1307. In contrast, the excitation profile from ZnTCPP-U2 contained transitions associated with the porphyrin linker exclusively. Photocatalytic activity from ZnTCPP-U2 significantly underperformed in comparison to that of the other two MOFs. These data suggest that linkers' photophysical properties can be used to predict the photocatalytic behavior of uranyl-containing MOFs.

Structure and Dynamics of NaCl/KCl/CaCl2-EuCln (n = 2, 3) Molten Salts.

Modern molten salt reactor design and the techniques of electrorefining spent nuclear fuels require a better understanding of the chemical and physical behavior of lanthanide/actinide ions with different oxidation states dissolved in various solvent salts. The molecular structures and dynamics that are driven by the short-range interactions between solute cations and anions and long-range solute and solvent cations are still unclear. In order to study the structural change of solute cations caused by different solvent salts, we performed first-principles molecular dynamics simulations in molten salts and extended X-ray absorption fine structure (EXAFS) measurements for the cooled molten salt samples to identify the local coordination environment of Eu2+ and Eu3+ ions in CaCl2, NaCl, and KCl. The simulations reveal that with the increasing polarizing the outer sphere cations from K+ to Na+ to Ca2+, the coordination number (CN) of Cl- in the first solvation shell increases from 5.6 (Eu2+) and 5.9 (Eu3+) in KCl to 6.9 (Eu2+) and 7.0 (Eu3+) in CaCl2. This coordination change is validated by the EXAFS measurements, in which the CN of Cl- around Eu increases from 5 in KCl to 7 in CaCl2. Our simulation shows that the fewer Cl- ions coordinated to Eu leads to a more rigid first coordination shell with longer lifetime. Furthermore, the diffusivities of Eu2+/Eu3+ are related to the rigidity of their first coordination shell of Cl-: the more rigid the first coordination shell is, the slower the solute cations diffuse.

Photochemical separation of plutonium from uranium.

Plutonium-based technologies would benefit if chemical hazards for purifying plutonium were reduced. One critical processing step where improvements could be impactful is the adjustment of plutonium oxidation-states during separations. This transformation often requires addition of redox agents. Unfortunately, many of the redox agents used previously cannot be used today because their properties are deemed incompatible with modern day processing facilities and waste stream safety requirements. We demonstrated herein that photochemistry can be used as an alternative to those chemical agents. We observed that (1) Pu4+ → Pu3+ and UO22+ → U4+ photoreduction proceeded in HCl(aq) and HNO3(aq) and (2) photogenerated Pu3+(aq) and U4+(aq) could be separated using anion exchange chromatography (high yield, >90%; good separation factor, 322).

Oxidizing Americium(III) with Sodium Bismuthate in Acidic Aqueous Solutions.

Historic perspectives describing f-elements as being redox "inactive" are fading. Researchers continue to discover new oxidation states that are not as inaccessible as once assumed for actinides and lanthanides. Inspired by those contributions, we studied americium(III) oxidation in aqueous media under air using NaBiO3(s). We identified selective oxidation of Am3+(aq) to AmO22+(aq) or AmO21+(aq) could be achieved by changing the aqueous matrix identity. AmO22+(aq) formed in H3PO4(aq) (1 M) and AmO21+(aq) formed in dilute HCl(aq) (0.1 M). These americyl products were stable for weeks in solution. Also included is a method to recover 243Am from the americium and bismuth mixtures generated during these studies.

Advancing the Am Extractant Design through the Interplay among Planarity, Preorganization, and Substitution Effects.

Advancing the field of chemical separations is important for nearly every area of science and technology. Some of the most challenging separations are associated with the americium ion Am(III) for its extraction in the nuclear fuel cycle, 241Am production for industrial usage, and environmental cleanup efforts. Herein, we study a series of extractants, using first-principle calculations, to identify the electronic properties that preferentially influence Am(III) binding in separations. As the most used extractant family and because it affords a high degree of functionalization, the polypyridyl family of extractants is chosen to study the effects of the planarity of the structure, preorganization of coordinating atoms, and substitution of various functional groups. The actinyl ions are used as a structurally simplified surrogate model to quickly screen the most promising candidates that can separate these metal ions. The down-selected extractants are then tested for the Am(III)/Eu(III) system. Our results show that π interactions, especially those between the central terpyridine ring and Am(III), play a crucial role in separation. Adding an electron-donating group onto the terpyridine backbone increases the binding energies to Am(III) and stabilizes Am-terpyridine coordination. Increasing the planarity of the extractant increases the binding strength as well, although this effect is found to be rather weak. Preorganizing the coordinating atoms of an extractant to their binding configuration as in the bound metal complex speeds up the binding process and significantly improves the kinetics of the separation process. This conclusion is validated by the synthesized 1,2-dihydrodipyrido[4,3-b;5,6-b]acridine (13) extractant, a preorganized derivative of the terpyridine extractant, which we experimentally showed was four times more effective than terpyridine at separating Am3+ from Eu3+ (SFAm/Eu ∼ 23 ± 1).

Synthesis, solid-state, solution, and theoretical characterization of an "in-cage" scandium-NOTA complex.

Developing chelators that strongly and selectively bind rare-earth elements (Sc, Y, La, and lanthanides) represents a longstanding fundamental challenge in inorganic chemistry. Solving these challenges is becoming more important because of increasing use of rare-earth elements in numerous technologies, ranging from paramagnets to luminescent materials. Within this context, we interrogated the complexation chemistry of the scandium(III) (Sc3+) trication with the hexadentate 1,4,7-triazacyclononane-1,4,7-triacetic acid (H3NOTA) chelator. This H3NOTA chelator is often regarded as an underperformer for complexing Sc3+. A common assumption is that metalation does not fully encapsulate Sc3+ within the NOTA3- macrocycle, leaving Sc3+ on the periphery of the chelate and susceptible to demetalation. Herein, we developed a synthetic approach that contradicted those assumptions. We confirmed that our procedure forced Sc3+ into the NOTA3- binding pocket by using single crystal X-ray diffraction to determine the Na[Sc(NOTA)(OOCCH3)] structure. Density functional theory (DFT) and 45Sc nuclear magnetic resonance (NMR) spectroscopy showed Sc3+ encapsulation was retained when the crystals were dissolved. Solution-phase and DFT studies revealed that [Sc(NOTA)(OOCCH3)]1- could accommodate an additional H2O capping ligand. Thermodynamic properties associated with the Sc-OOCCH3 and Sc-H2O capping ligand interactions demonstrated that these capping ligands occupied critical roles in stabilizing the [Sc(NOTA)] chelation complex.

Relativistic Effects in Modeling the Ligand K-Edge X-ray Absorption Near-Edge Structure of Uranium Complexes.

Accurate modeling of the complex electronic structure of actinide complexes requires full inclusion of relativistic effects. In this study, we examine the effect of explicit inclusion of spin-orbit coupling (SOC) versus scalar relativistic effects on the predicted spectra for heavy-element complexes. In this study, we employ a relativistic two-component Hamiltonian in the X2C form with all of the electrons in the system being considered explicitly to compare and contrast with previous studies that included the relativistic effects by means of relativistic effective core potentials (RECPs). A few uranium complexes are chosen as model systems. Comparison of the computed Cl K-edge X-ray absorption spectra with experimental data shows significantly improved agreement when a variational relativistic treatment of SOC is performed. In particular, we note the importance of SOC terms to obtain not only correct transition energies but also correct intensities for these heavy-element complexes because of the redistribution of ligand bonding character among the valence MOs. While RECPs generally agree well with all-electron scalar relativistic calculations, there are some differences in the predicted spectra of open-shell systems. These methods are still suitable for broad application to analyze the qualitative nature of transitions in X-ray absorption spectra, but caution is recommended for quantitative analysis, as SOC can be non-negligible for both open- and closed-shell heavy-element systems.

Reactivity of a Chloride Decorated, Mixed Valent CeIII/IV38-Oxo Cluster.

A cerium-oxo nanocluster capped by chloride ligands, [CeIV38-nCeIIInO56-(n+1)(OH)n+1Cl51(H2O)11]10- (n = 1-24), has been isolated from acidic chloride solutions by using potassium counterions. The crystal structure was elucidated using single crystal X-ray diffraction. At the center of the cluster is a {Ce14} core that exhibits the same fluorite-type structure as bulk CeO2, with eight-coordinate Ce sites bridged by tetrahedral oxo anions. The {Ce14} is further surrounded by a peripheral shell of six tetranuclear {Ce4} subunits that are located on each of the faces of the core to yield the {Ce38} cluster. The surface of the cluster is capped by 51 bridging/terminal chloride ligands and 11 water molecules; the anionic cluster is charge balanced by potassium counterions that exist in the outer coordination sphere. While assignment of the Ce oxidation state by bond valence summation was ambiguous, Ce L3-edge X-ray absorption, X-ray photoelectron, and UV-vis-NIR absorption results were consistent with a CeIII/CeIV cluster. Systematic changes in the XANES and UV-vis-NIR absorption spectra over time pointed to reactivity of the cluster upon exposure to air. These changes were examined using single crystal X-ray diffraction, and a clear single-crystal-to-single-crystal transformation was captured; an overall loss of surface-bound chlorides and water molecules as well as new µ2-OH sites was observed on the cluster surface. This work provides a rare snapshot of metal oxide cluster reactivity. The results may hold implications for understanding the physical and chemical properties of ceria nanoparticles and provide insight into the behavior of other metal-oxo clusters of significant technological and environmental interest.

Gamma and Decay Energy Spectroscopy Measurements of Trinitite.

We report gamma ray spectroscopy measurements of trinitite samples and analogous samples obtained from detonation sites in Nevada and Semipalatinsk, as well as in situ measurements of topsoil at the Trinity site. We also report the first isotopic composition measurements of trinitite using the novel forensics technique of decay energy spectroscopy (DES) as a complement to traditional forensics techniques. Our gamma spectroscopy and DES measurements are compared to other published results.

Isolation and characterization of a californium metallocene.

Californium (Cf) is currently the heaviest element accessible above microgram quantities. Cf isotopes impose severe experimental challenges due to their scarcity and radiological hazards. Consequently, chemical secrets ranging from the accessibility of 5f/6d valence orbitals to engage in bonding, the role of spin-orbit coupling in electronic structure, and reactivity patterns compared to other f elements, remain locked. Organometallic molecules were foundational in elucidating periodicity and bonding trends across the periodic table1-3, with a twenty-first-century renaissance of organometallic thorium (Th) through plutonium (Pu) chemistry4-12, and to a smaller extent americium (Am)13, transforming chemical understanding. Yet, analogous curium (Cm) to Cf chemistry has lain dormant since the 1970s. Here, we revive air-/moisture-sensitive Cf chemistry through the synthesis and characterization of [Cf(C5Me4H)2Cl2K(OEt2)]n from two milligrams of 249Cf. This bent metallocene motif, not previously structurally authenticated beyond uranium (U)14,15, contains the first crystallographically characterized Cf-C bond. Analysis suggests the Cf-C bond is largely ionic with a small covalent contribution. Lowered Cf 5f orbital energy versus dysprosium (Dy) 4f in the colourless, isoelectronic and isostructural [Dy(C5Me4H)2Cl2K(OEt2)]n results in an orange Cf compound, contrasting with the light-green colour typically associated with Cf compounds16-22.

Complexation and redox chemistry of neptunium, plutonium and americium with a hydroxylaminato ligand.

There is significant interest in ligands that can stabilize actinide ions in oxidation states that can be exploited to chemically differentiate 5f and 4f elements. Applications range from developing large-scale actinide separation strategies for nuclear industry processing to carrying out analytical studies that support environmental monitoring and remediation efforts. Here, we report syntheses and characterization of Np(iv), Pu(iv) and Am(iii) complexes with N-tert-butyl-N-(pyridin-2-yl)hydroxylaminato, [2-( t BuNO)py]-(interchangeable hereafter with [( t BuNO)py]-), a ligand which was previously found to impart remarkable stability to cerium in the +4 oxidation state. An[( t BuNO)py]4 (An = Pu, 1; Np, 2) have been synthesized, characterized by X-ray diffraction, X-ray absorption, 1H NMR and UV-vis-NIR spectroscopies, and cyclic voltammetry, along with computational modeling and analysis. In the case of Pu, oxidation of Pu(iii) to Pu(iv) was observed upon complexation with the [( t BuNO)py]- ligand. The Pu complex 1 and Np complex 2 were also isolated directly from Pu(iv) and Np(iv) precursors. Electrochemical measurements indicate that a Pu(iii) species can be accessed upon one-electron reduction of 1 with a large negative reduction potential (E 1/2 = -2.26 V vs. Fc+/0). Applying oxidation potentials to 1 and 2 resulted in ligand-centered electron transfer reactions, which is different from the previously reported redox chemistry of UIV[( t BuNO)py]4 that revealed a stable U(v) product. Treatment of an anhydrous Am(iii) precursor with the [( t BuNO)py]- ligand did not result in oxidation to Am(iv). Instead, the dimeric complex [AmIII(µ2-( t BuNO)py)(( t BuNO)py)2]2 (3) was isolated. Complex 3 is a rare example of a structurally characterized non-aqueous Am-containing molecular complex prepared using inert atmosphere techniques. Predicted redox potentials from density functional theory calculations show a trivalent accessibility trend of U(iii) < Np(iii) < Pu(iii) and that the higher oxidation states of actinides (i.e., +5 for Np and Pu and +4 for Am) are not stabilized by [2-( t BuNO)py]-, in good agreement with experimental observations.

Using molten salts to probe outer-coordination sphere effects on lanthanide(III)/(II) electron-transfer reactions.

Controlling structure and reactivity by manipulating the outer-coordination sphere around a given reagent represents a longstanding challenge in chemistry. Despite advances toward solving this problem, it remains difficult to experimentally interrogate and characterize outer-coordination sphere impact. This work describes an alternative approach that quantifies outer-coordination sphere effects. It shows how molten salt metal chlorides (MCln; M = K, Na, n = 1; M = Ca, n = 2) provided excellent platforms for experimentally characterizing the influence of the outer-coordination sphere cations (Mn+) on redox reactions accessible to lanthanide ions; Ln3+ + e1- → Ln2+ (Ln = Eu, Yb, Sm; e1- = electron). As a representative example, X-ray absorption spectroscopy and cyclic voltammetry results showed that Eu2+ instantaneously formed when Eu3+ dissolved in molten chloride salts that had strongly polarizing cations (like Ca2+ from CaCl2) via the Eu3+ + Cl1- → Eu2+ + ½Cl2 reaction. Conversely, molten salts with less polarizing outer-sphere M1+ cations (e.g., K1+ in KCl) stabilized Ln3+. For instance, the Eu3+/Eu2+ reduction potential was >0.5 V more positive in CaCl2 than in KCl. In accordance with first-principle molecular dynamics (FPMD) simulations, we postulated that hard Mn+ cations (high polarization power) inductively removed electron density from Lnn+ across Ln-Cl⋯Mn+ networks and stabilized electron-rich and low oxidation state Ln2+ ions. Conversely, less polarizing Mn+ cations (like K1+) left electron density on Lnn+ and stabilized electron-deficient and high-oxidation state Ln3+ ions.

Advancing understanding of actinide(iii) (Ac, Am, Cm) aqueous complexation chemistry.

The positive impact of having access to well-defined starting materials for applied actinide technologies - and for technologies based on other elements - cannot be overstated. Of numerous relevant 5f-element starting materials, those in complexing aqueous media find widespread use. Consider acetic acid/acetate buffered solutions as an example. These solutions provide entry into diverse technologies, from small-scale production of actinide metal to preparing radiolabeled chelates for medical applications. However, like so many aqueous solutions that contain actinides and complexing agents, 5f-element speciation in acetic acid/acetate cocktails is poorly defined. Herein, we address this problem and characterize Ac3+ and Cm3+ speciation as a function of increasing acetic acid/acetate concentrations (0.1 to 15 M, pH = 5.5). Results obtained via X-ray absorption and optical spectroscopy show the aquo ion dominated in dilute acetic acid/acetate solutions (0.1 M). Increasing acetic acid/acetate concentrations to 15 M increased complexation and revealed divergent reactivity between early and late actinides. A neutral Ac(H2O)6 (1)(O2CMe)3 (1) compound was the major species in solution for the large Ac3+. In contrast, smaller Cm3+ preferred forming an anion. There were approximately four bound O2CMe1- ligands and one to two inner sphere H2O ligands. The conclusion that increasing acetic acid/acetate concentrations increased acetate complexation was corroborated by characterizing (NH4)2M(O2CMe)5 (M = Eu3+, Am3+ and Cm3+) using single crystal X-ray diffraction and optical spectroscopy (absorption, emission, excitation, and excited state lifetime measurements).

Crystallographic characterization of (C5H4SiMe3)3U(BH4).

New syntheses have been developed for the synthesis of (borohydrido-κ3 H)tris-[η5-(tri-methyl-sil-yl)cyclo-penta-dien-yl]uranium(IV), [U(BH4)(C8H13Si)3] or Cp'3U(BH4) (Cp' = C5H4SiMe3) and its structure has been determined by single-crystal X-ray crystallography. This compound crystallized in the space group P and the structure features three η 5-coordinated Cp' rings and a κ 3-coordinated (BH4)- ligand.

Near-infrared C-term MCD spectroscopy of octahedral uranium(V) complexes.

C-term magnetic circular dichroism (MCD) spectroscopy is a powerful method for probing d-d and f-f transitions in paramagnetic metal complexes. However, this technique remains underdeveloped both experimentally and theoretically for studies of U(v) complexes of Oh symmetry, which have been of longstanding interest for probing electronic structure, bonding, and covalency in 5f systems. In this study, C-term NIR MCD of the Laporte forbidden f-f transitions of [UCl6]- and [UF6]- are reported, demonstrating the significant fine structure resolution possible with this technique including for the low energy Γ7 → Γ8 transitions in [UF6]-. The experimental NIR MCD studies were further extended to [U(OC6F5)6]-, [U(CH2SiMe3)6]-, and [U(NC(tBu)(Ph))6]- to evaluate the effects of ligand-type on the f-f MCD fine structure features. Theoretical calculations were conducted to determine the Laporte forbidden f-f transitions and their MCD intensity experimentally observed in the NIR spectra of the U(v) hexahalide complexes, via the inclusion of vibronic coupling, to better understand the underlying spectral fine structure features for these complexes. These spectra and simulations provide an important platform for the application of MCD spectroscopy to this widely studied class of U(v) complexes and identify areas for continued theoretical development.

Structural and Spectroscopic Comparison of Soft-Se vs. Hard-O Donor Bonding in Trivalent Americium/Neodymium Molecules.

Covalency is often considered to be an influential factor in driving An3+ vs. Ln3+ selectivity invoked by soft donor ligands. This is intensely debated, particularly the extent to which An3+ /Ln3+ covalency differences prevail and manifest as the f-block is traversed, and the effects of periodic breaks beyond Pu. Herein, two Am complexes, [Am{N(E=PPh2 )2 }3 ] (1-Am, E=Se; 2-Am, E=O) are compared to isoradial [Nd{N(E=PPh2 )2 }3 ] (1-Nd, 2-Nd) complexes. Covalent contributions are assessed and compared to U/La and Pu/Ce analogues. Through ab initio calculations grounded in UV-vis-NIR spectroscopy and single-crystal X-ray structures, we observe differences in f orbital involvement between Am-Se and Nd-Se bonds, which are not present in O-donor congeners.

Structural and spectroscopic characterization of an einsteinium complex.

The transplutonium elements (atomic numbers 95-103) are a group of metals that lie at the edge of the periodic table. As a result, the patterns and trends used to predict and control the physics and chemistry for transition metals, main-group elements and lanthanides are less applicable to transplutonium elements. Furthermore, understanding the properties of these heavy elements has been restricted by their scarcity and radioactivity. This is especially true for einsteinium (Es), the heaviest element on the periodic table that can currently be generated in quantities sufficient to enable classical macroscale studies1. Here we characterize a coordination complex of einsteinium, using less than 200 nanograms of 254Es (with half-life of 275.7(5) days), with an organic hydroxypyridinone-based chelating ligand. X-ray absorption spectroscopic and structural studies are used to determine the energy of the L3-edge and a bond distance of einsteinium. Photophysical measurements show antenna sensitization of EsIII luminescence; they also reveal a hypsochromic shift on metal complexation, which had not previously been observed in lower-atomic-number actinide elements. These findings are indicative of an intermediate spin-orbit coupling scheme in which j-j coupling (whereby single-electron orbital angular momentum and spin are first coupled to form a total angular momentum, j) prevails over Russell-Saunders coupling. Together with previous actinide complexation studies2, our results highlight the need to continue studying the unusual behaviour of the actinide elements, especially those that are scarce and short-lived.