Electron Diffraction Tomography on Two-Phase Nanolamellae of Topochemically Synthesized Cu(Sb2S3)Cl.

The dark red semiconductor Cu(Sb2S3)Cl was obtained by leaching the layered precursor Cu(Sb2S3)[AlCl4] in a 0.1 M aqueous HCl solution. The selective extraction of AlCl3 yielded a mica-like lamellar product of poor crystallinity. Misalignment of lamellae down to the nanoscale prevented structure determination by conventional single-crystal X-ray diffraction, but a combination of transmission electron microscopy, selected area electron diffraction, and selected area electron precession diffraction tomography on a nanoscale spot with largely ordered crystalline lamellae revealed the crystal structures of two intergrown modifications. Orthorhombic o-Cu(Sb2S3)Cl and monoclinic m-Cu(Sb2S3)Cl have similar layers to the precursor and differ only in the stacking of the layers. These consist of uncharged Sb2S3 strands, whose sulfide ions, together with chloride ions, coordinate the copper(I) cations. Only one chloride ion remained from the [AlCl4]- group. DFT calculations confirm the structure solution for the orthorhombic form and suggest that the monoclinic structure is metastable against transformation to o-Cu(Sb2S3)Cl.

Temperature-dependence of beam-driven dynamics in graphene-fullerene sandwiches.

C60 fullerenes encapsulated between graphene sheets were investigated by aberration-corrected high-resolution transmission electron microscopy at different temperatures, namely about 93 K, 293 K and 733 K, and by molecular dynamics simulations. We studied beam-induced dynamics of the C60 fullerenes and the encapsulating graphene, measured the critical doses for the initial damage to the fullerenes and followed the beam-induced polymerization. We find that, while the doses for the initial damage do not strongly depend on temperature, the clusters formed by the subsequent polymerization are more tubular at lower temperatures, while sheet-like structures are generated at higher temperatures. The experimental findings are supported by the results of first-principles and analytical potential molecular dynamics simulations. The merging of curved carbon sheets is clearly promoted at higher temperatures and proceeds at once over few-nm segments.

Achieving High Substitutional Incorporation in Mn-Doped Graphene.

Despite its broad potential applications, substitution of carbon by transition metal atoms in graphene has so far been explored only to a limited extent. We report the realization of substitutional Mn doping of graphene to a record high atomic concentration of 0.5%, which was achieved using ultralow-energy ion implantation. By correlating the experimental data with the results of ab initio Born-Oppenheimer molecular dynamics calculations, we infer that direct substitution is the dominant mechanism of impurity incorporation. Thermal annealing in ultrahigh vacuum provides efficient removal of surface contaminants and additional implantation-induced disorder, resulting in Mn-doped graphene that, aside from the substitutional Mn impurities, is essentially as clean and defect-free as the as-grown layer. We further show that the Dirac character of graphene is preserved upon substitutional Mn doping, even in this high concentration regime, making this system ideal for studying the interaction between Dirac conduction electrons and localized magnetic moments. More generally, these results show that ultralow energy ion implantation can be used for controlled functionalization of graphene with substitutional transition-metal atoms, of relevance for a wide range of applications, from magnetism and spintronics to single-atom catalysis.

Probing the Band Splitting near the Γ Point in the van der Waals Magnetic Semiconductor CrSBr.

This study investigates the electronic band structure of chromium sulfur bromide (CrSBr) through comprehensive photoluminescence (PL) characterization. We clearly identify low-temperature optical transitions between two closely adjacent conduction-band states and two different valence-band states. The analysis on the PL data robustly unveils energy splittings, band gaps, and excitonic transitions across different thicknesses of CrSBr, from monolayer to bulk. Temperature-dependent PL measurements elucidate the stability of the band splitting below the Néel temperature, suggesting that magnons coupled with excitons are responsible for the symmetry breaking and brightening of the transitions from the secondary conduction band minimum (CBM2) to the global valence band maximum (VBM1). Collectively, these results not only reveal splitting in both the conduction and valence bands but also highlight a significant advance in our understanding of the interplay between the optical, electronic, and magnetic properties of antiferromagnetic two-dimensional van der Waals crystals.

Magnetic State Control of Non-van der Waals 2D Materials by Hydrogenation.

Controlling the magnetic state of two-dimensional (2D) materials is crucial for spintronics. By employing data-mining and autonomous density functional theory calculations, we demonstrate the switching of magnetic properties of 2D non-van der Waals materials upon hydrogen passivation. The magnetic configurations are tuned to states with flipped and enhanced moments. For 2D CdTiO3─a diamagnetic compound in the pristine case─we observe an onset of ferromagnetism upon hydrogenation. Further investigation of the magnetization density of the pristine and passivated systems provides a detailed analysis of modified local spin symmetries and the emergence of ferromagnetism. Our results indicate that selective surface passivation is a powerful tool for tailoring magnetic properties of nanomaterials, such as non-vdW 2D compounds.

Robust Magnetoelectric Coupling in FeTiO3/Ga2O3 Non-van der Waals Heterostructures.

Magnetoelectric coupling represents a significant breakthrough for next-generation electronics, offering the ability to achieve nonvolatile magnetic control via electrical means. In this comprehensive investigation, leveraging first-principles calculations, we unveil a robust magnetoelectric coupling within multiferroic heterostructures (HSs) by ingeniously integrating a non-van der Waals (non-vdW) magnetic FeTiO3 monolayer with the ferroelectric (FE) Ga2O3. Diverging from conventional van der Waals (vdW) multiferroic HSs, the magnetic states of the FeTiO3 monolayer can be efficiently toggled between ferromagnetic (FM) and antiferromagnetic (AFM) configurations by reversing the polarization of the Ga2O3 monolayer. This intriguing phenomenon arises from polarization-dependent substantial interlayer electron transfers and the interplay between superexchange and direct-exchange magnetic couplings of the iron atoms. The carrier-mediated interfacial interactions induce crucial shifts in Fermi level positions, decisively imparting distinct electronic characteristics near the Fermi level of composite systems. These novel findings offer exciting prospects for the future of magnetoelectric technology.

Phase transformations in single-layer MoTe2stimulated by electron irradiation and annealing.

Among two-dimensional (2D) transition metal dichalcogenides (TMDs), MoTe2is predestined for phase-engineering applications due to the small difference in free energy between the semiconducting H-phase and metallic 1T'-phase. At the same time, the complete picture of the phase evolution originating from point defects in single-layer of semiconducting H-MoTe2via Mo6Te6nanowires to cubic molybdenum has not yet been reported so far, and it is the topic of the present study. The occurring phase transformations in single-layer H-MoTe2were initiated by 40-80 kV electrons in the spherical and chromatic aberration-corrected high-resolution transmission electron microscope and/or when subjected to high temperatures. We analyse the damage cross-section at voltages between 40 kV and 80 kV and relate the results to previously published values for other TMDs. Then we demonstrate that electron beam irradiation offers a route to locally transform freestanding single-layer H-MoTe2into one-dimensional (1D) Mo6Te6nanowires. Combining the experimental data with the results of first-principles calculations, we explain the transformations in MoTe2single-layers and Mo6Te6nanowires by an interplay of electron-beam-induced energy transfer, atom ejection, and oxygen absorption. Further, the effects emerging from electron irradiation are compared with those produced byin situannealing in a vacuum until pure molybdenum crystals are obtained at temperatures of about 1000 °C. A detailed understanding of high-temperature solid-to-solid phase transformation in the 2D limit can provide insights into the applicability of this material for future device fabrication.

Molybdenum Chloride Nanostructures with Giant Lattice Distortions Intercalated into Bilayer Graphene.

The nanospace of the van der Waals (vdW) gap between structural units of two-dimensional (2D) materials serves as a platform for growing unusual 2D systems through intercalation and studying their properties. Various kinds of metal chlorides have previously been intercalated for tuning the properties of host layered materials, but the atomic structure of the intercalants remains still unidentified. In this study, we investigate the atomic structural transformation of molybdenum(V) chloride (MoCl5) after intercalation into bilayer graphene (BLG). Using scanning transmission electron microscopy, we found that the intercalated material represents MoCl3 networks, MoCl2 chains, and Mo5Cl10 rings. Giant lattice distortions and frequent structural transitions occur in the 2D MoClx that have never been observed in metal chloride systems. The trend of symmetric to nonsymmetric structural transformations can cause additional charge transfer from BLG to the intercalated MoClx, as suggested by our density functional theory calculations. Our study deepens the understanding of the behavior of matter in the confined space of the vdW gap in BLG and provides hints at a more efficient tuning of material properties by intercalation for potential applications, including transparent conductive films, optoelectronics, and energy storage.

Measurement and Simulation of Ultra-Low-Energy Ion-Solid Interaction Dynamics.

Ion implantation is a key capability for the semiconductor industry. As devices shrink, novel materials enter the manufacturing line, and quantum technologies transition to being more mainstream. Traditional implantation methods fall short in terms of energy, ion species, and positional precision. Here, we demonstrate 1 keV focused ion beam Au implantation into Si and validate the results via atom probe tomography. We show the Au implant depth at 1 keV is 0.8 nm and that identical results for low-energy ion implants can be achieved by either lowering the column voltage or decelerating ions using bias while maintaining a sub-micron beam focus. We compare our experimental results to static calculations using SRIM and dynamic calculations using binary collision approximation codes TRIDYN and IMSIL. A large discrepancy between the static and dynamic simulation is found, which is due to lattice enrichment with high-stopping-power Au and surface sputtering. Additionally, we demonstrate how model details are particularly important to the simulation of these low-energy heavy-ion implantations. Finally, we discuss how our results pave a way towards much lower implantation energies while maintaining high spatial resolution.

Ferromagnetic Interlayer Coupling in CrSBr Crystals Irradiated by Ions.

Layered magnetic materials are becoming a major platform for future spin-based applications. Particularly, the air-stable van der Waals compound CrSBr is attracting considerable interest due to its prominent magneto-transport and magneto-optical properties. In this work, we observe a transition from antiferromagnetic to ferromagnetic behavior in CrSBr crystals exposed to high-energy, non-magnetic ions. Already at moderate fluences, ion irradiation induces a remanent magnetization with hysteresis adapting to the easy-axis anisotropy of the pristine magnetic order up to a critical temperature of 110 K. Structure analysis of the irradiated crystals in conjunction with density functional theory calculations suggests that the displacement of constituent atoms due to collisions with ions and the formation of interstitials favors ferromagnetic order between the layers.

Optical Properties of MoSe2 Monolayer Implanted with Ultra-Low-Energy Cr Ions.

This paper explores the optical properties of an exfoliated MoSe2 monolayer implanted with Cr+ ions, accelerated to 25 eV. Photoluminescence of the implanted MoSe2 reveals an emission line from Cr-related defects that is present only under weak electron doping. Unlike band-to-band transition, the Cr-introduced emission is characterized by nonzero activation energy, long lifetimes, and weak response to the magnetic field. To rationalize the experimental results and get insights into the atomic structure of the defects, we modeled the Cr-ion irradiation process using ab initio molecular dynamics simulations followed by the electronic structure calculations of the system with defects. The experimental and theoretical results suggest that the recombination of electrons on the acceptors, which could be introduced by the Cr implantation-induced defects, with the valence band holes is the most likely origin of the low-energy emission. Our results demonstrate the potential of low-energy ion implantation as a tool to tailor the properties of two-dimensional (2D) materials by doping.

Suppressed Fermi Level Pinning and Wide-Range Tunable Schottky Barrier in CrX3 (X = I, Br)/2D Metal Contacts.

CrX3 (X = I, Br) monolayers exhibit outstanding performance in spintronic devices. However, the Schottky barrier at the CrX3/electrode interface severely impedes the charge injection efficiency. Herein, we propose two-dimensional (2D) metals as electrodes to form van der Waals (vdW) contact with CrX3 monolayers and systematically explore the contact properties of CrX3/metal by density functional theory (DFT) calculations. The results demonstrate that the strongly suppressed Fermi level pinning (FLP) effect and the wide-range tunable Schottky barrier can be achieved in CrX3/metal contacts. Specifically, the n-type and the p-type Schottky contacts can be realized in CrX3/metal contacts by choosing 2D metal electrodes with different work functions. Importantly, the pinning factors for CrX3/metal contacts are exceptionally larger than other commonly studied 2D semiconductors, indicating the strongly suppressed FLP in CrX3/metal contacts, which leads to the wide-range tunable Schottky barrier. Our findings provide guidance to the choice of electrodes and promote the development of CrX3-based spin devices.

A van der Waals Heterostructure with an Electronically Textured Moiré Pattern: PtSe2/PtTe2.

The interlayer interaction in Pt-dichalcogenides strongly affects their electronic structures. The modulations of the interlayer atom-coordination in vertical heterostructures based on these materials are expected to laterally modify these interlayer interactions and thus provide an opportunity to texture the electronic structure. To determine the effects of local variation of the interlayer atom coordination on the electronic structure of PtSe2, van der Waals heterostructures of PtSe2 and PtTe2 have been synthesized by molecular beam epitaxy. The heterostructure forms a coincidence lattice with 13 unit cells of PtSe2 matching 12 unit cells of PtTe2, forming a moiré superstructure. The interaction with PtTe2 reduces the band gap of PtSe2 monolayers from 1.8 eV to 0.5 eV. While the band gap is uniform across the moiré unit cell, scanning tunneling spectroscopy and dI/dV mapping identify gap states that are localized within certain regions of the moiré unit cell. Deep states associated with chalcogen pz-orbitals at binding energies of ∼ -2 eV also exhibit lateral variation within the moiré unit cell, indicative of varying interlayer chalcogen interactions. Density functional theory calculations indicate that local variations in atom coordination in the moiré unit cell cause variations in the charge transfer from PtTe2 to PtSe2, thus affecting the value of the interface dipole. Experimentally this is confirmed by measuring the local work function by field emission resonance spectroscopy, which reveals a large work function modulation of ∼0.5 eV within the moiré structure. These results show that the local coordination variation of the chalcogen atoms in the PtSe2/PtTe2 van der Waals heterostructure induces a nanoscale electronic structure texture in PtSe2.

Electron-Beam- and Thermal-Annealing-Induced Structural Transformations in Few-Layer MnPS3.

Quasi-two-dimensional (2D) manganese phosphorus trisulfide, MnPS3, which exhibits antiferromagnetic ordering, is a particularly interesting material in the context of magnetism in a system with reduced dimensionality and its potential technological applications. Here, we present an experimental and theoretical study on modifying the properties of freestanding MnPS3 by local structural transformations via electron irradiation in a transmission electron microscope and by thermal annealing under vacuum. In both cases we find that MnS1-xPx phases (0 ≤ x < 1) form in a crystal structure different from that of the host material, namely that of the α- or γ-MnS type. These phase transformations can both be locally controlled by the size of the electron beam as well as by the total applied electron dose and simultaneously imaged at the atomic scale. For the MnS structures generated in this process, our ab initio calculations indicate that their electronic and magnetic properties strongly depend on both in-plane crystallite orientation and thickness. Moreover, the electronic properties of the MnS phases can be further tuned by alloying with phosphorus. Therefore, our results show that electron beam irradiation and thermal annealing can be utilized to grow phases with distinct properties starting from freestanding quasi-2D MnPS3.

Catalytic Activity of Defect-Engineered Transition Me tal Dichalcogenides Mapped with Atomic-Scale Precision by Electrochemical Scanning Tunneling Microscopy.

Unraveling structure-activity relationships is a key objective of catalysis. Unfortunately, the intrinsic complexity and structural heterogeneity of materials stand in the way of this goal, mainly because the activity measurements are area-averaged and therefore contain information coming from different surface sites. This limitation can be surpassed by the analysis of the noise in the current of electrochemical scanning tunneling microscopy (EC-STM). Herein, we apply this strategy to investigate the catalytic activity toward the hydrogen evolution reaction of monolayer films of MoSe2. Thanks to atomically resolved potentiodynamic experiments, we can evaluate individually the catalytic activity of the MoSe2 basal plane, selenium vacancies, and different point defects produced by the intersections of metallic twin boundaries. The activity trend deduced by EC-STM is independently confirmed by density functional theory calculations, which also indicate that, on the metallic twin boundary crossings, the hydrogen adsorption energy is almost thermoneutral. The micro- and macroscopic measurements are combined to extract the turnover frequency of different sites, obtaining for the most active ones a value of 30 s-1 at -136 mV vs RHE.

Formation of In-Plane Semiconductor-Metal Contacts in 2D Platinum Telluride by Converting PtTe2 to Pt2Te2.

Monolayer PtTe2 is a narrow gap semiconductor while Pt2Te2 is a metal. Here we show that the former can be transformed into the latter by reaction with vapor-deposited Pt atoms. The transformation occurs by nucleating the Pt2Te2 phase within PtTe2 islands, so that a metal-semiconductor junction is formed. A flat band structure is found with the Fermi level of the metal aligning with that of the intrinsically p-doped PtTe2. This is achieved by an interface dipole that accommodates the ∼0.2 eV shift in the work functions of the two materials. First-principles calculations indicate that the origin of the interface dipole is the atomic scale charge redistributions at the heterojunction. The demonstrated compositional phase transformation of a 2D semiconductor into a 2D metal is a promising approach for making in-plane metal contacts that are required for efficient charge injection and is of particular interest for semiconductors with large spin-orbit coupling, like PtTe2.

Chemical Vapor Deposition of High-Optical-Quality Large-Area Monolayer Janus Transition Metal Dichalcogenides.

One-pot chemical vapor deposition (CVD) growth of large-area Janus SeMoS monolayers is reported, with the asymmetric top (Se) and bottom (S) chalcogen atomic planes with respect to the central transition metal (Mo) atoms. The formation of these 2D semiconductor monolayers takes place upon the thermodynamic-equilibrium-driven exchange of the bottom Se atoms of the initially grown MoSe2 single crystals on gold foils with S atoms. The growth process is characterized by complementary experimental techniques including Raman and X-ray photoelectron spectroscopy, transmission electron microscopy, and the growth mechanisms are rationalized by first principle calculations. The remarkably high optical quality of the synthesized Janus monolayers is demonstrated by optical and magneto-optical measurements which reveal the strong exciton-phonon coupling and enable an exciton g-factor of -3.3.

Controlling Stoichiometry in Ultrathin van der Waals Films: PtTe2, Pt2Te3, Pt3Te4, and Pt2Te2.

The platinum-tellurium phase diagram exhibits various (meta)stable van der Waals (vdW) materials that can be constructed by stacking PtTe2 and Pt2Te2 layers. Monophase PtTe2, being the thermodynamically most stable compound, can readily be grown as thin films. Obtaining the other phases (Pt2Te3, Pt3Te4, Pt2Te2), especially in their ultimate thin form, is significantly more challenging. We show that PtTe2 thin films can be transformed by vacuum annealing-induced Te-loss into Pt3Te4- and Pt2Te2-bilayers. These transformations are characterized by scanning tunneling microscopy and X-ray and angle resolved photoemission spectroscopy. Once Pt3Te4 is formed, it is thermally stable up to 350°C. To transform Pt3Te4 into Pt2Te2, a higher annealing temperature of 400°C is required. The experiments combined with density functional theory calculations provide insights into these transformation mechanisms and show that a combination of the thermodynamic preference of Pt3Te4 over a phase segregation into PtTe2 and Pt2Te2 and an increase in the Te-vacancy formation energy for Pt3Te4 compared to the starting PtTe2 material is critical to stabilize the Pt3Te4 bilayer. To desorb more tellurium from Pt3Te4 and transform the material into Pt2Te2, a higher Te-vacancy formation energy has to be overcome by raising the temperature. Interestingly, bilayer Pt2Te2 can be retellurized by exposure to Te-vapor. This causes the selective transformation of the topmost Pt2Te2 layer into two layers of PtTe2, and consequently the synthesis of e Pt2Te3. Thus, all known Pt-telluride vdW compounds can be obtained in their ultrathin form by carefully controlling the stoichiometry of the material.

Self-Driven Broadband Photodetectors Based on MoSe2/FePS3 van der Waals n-p Type-II Heterostructures.

Two-dimensional (2D) van der Waals materials with broadband optical absorption are promising candidates for next-generation UV-vis-NIR photodetectors. FePS3, one of the emerging antiferromagnetic van der Waals materials with a wide bandgap and p-type conductivity, has been reported as an excellent candidate for UV optoelectronics. However, a high sensitivity photodetector with a self-driven mode based on FePS3 has not yet been realized. Here, we report a high-performance and self-powered photodetector based on a multilayer MoSe2/FePS3 type-II n-p heterojunction with a working range from 350 to 900 nm. The presented photodetector operates at zero bias and at room temperature under ambient conditions. It exhibits a maximum responsivity (Rmax) of 52 mA W-1 and an external quantum efficiency (EQEmax) of 12% at 522 nm, which are better than the characteristics of its individual constituents and many other photodetectors made of 2D heterostructures. The high performance of MoSe2/FePS3 is attributed to the built-in electric field in the MoSe2/FePS3 n-p junction. Our approach provides a promising platform for broadband self-driven photodetector applications.

Data-Driven Quest for Two-Dimensional Non-van der Waals Materials.

Two-dimensional (2D) materials are frequently associated with the sheets forming bulk layered compounds bonded by van der Waals (vdW) forces. The anisotropy and weak interaction between the sheets have also been the main criteria in the computational search for new 2D systems, predicting ∼2000 exfoliable compounds. However, some representatives of a new type of non-vdW 2D systems, without layered 3D analogues, were recently manufactured. For this novel materials class, data-driven design principles are still missing. Here, we outline a set of 8 binary and 20 ternary candidates by filtering the AFLOW-ICSD database according to structural prototypes. The oxidation state of the surface cations regulates the exfoliation energy with low oxidation numbers leading to weak bonding─a useful descriptor to obtain novel 2D materials also providing clear guidelines for experiments. A vast range of appealing electronic, optical, and magnetic properties make the candidates attractive for various applications and particularly spintronics.