Periapical healing following endodontic microsurgery with collagen-based bone-filling material: A randomized controlled clinical trial.

AIM: To evaluate two- and three-dimensionally the effect of resorbable collagen-based bone-filling material on periapical healing of endodontic lesions with four-wall defects following endodontic microsurgery (EMS). METHODOLOGY: This parallel, randomized controlled superiority clinical trial involved 86 lesions with the strictly endodontic origin and four-wall defect morphology. EMS procedures were performed by calibrated postgraduate residents. Before flap closure, osteotomies were randomized to the control or treatment group. In the control group, the flap was repositioned with no material added. In the treatment group, a collagen-based bone-filling augmentation material was placed into the osteotomy. Clinical and radiographic examinations were completed after 12 months. Periapical healing was evaluated by blinded evaluators using periapical (PA) radiographs according to Molven's criteria and cone beam computed tomography (CBCT) scans according to PENN's 3D criteria. Cortical plate healing was scored according to the RAC/B index. The data were analysed using Fisher's exact test, Logistic regression models and Chi-squared test. The significance level was predetermined at p < .05. RESULTS: Sixty-six cases were evaluated at the 12-month follow-up, with 30 and 36 cases in the control and treatment groups, respectively. Only the asymptomatic cases (control = 26, treatment = 32) were included in the radiographic evaluation. Twenty-three cases (88.5%) in the control and 28 (87.5%) cases in the treatment group demonstrated complete healing on PA radiographs (p = 1.000). On CBCT, 10 (38.4%) and 21 (65.6%) cases had completely healed in the control and treatment groups, respectively (p = .095). The re-establishment of the buccal cortical plate was detected in 12 (46.2%) and 22 (68.8%) cases in the control and treatment groups, respectively (p = .243). CONCLUSION: Within the limitations of the present study, the use of collagen-based bone-filling material had no statistically significant effect on the periapical healing of endodontic lesions with four-wall defect following EMS at the 12-month follow-up when evaluated by PA radiographs or CBCT scans. However, the observed higher percentage of a re-established cortical plate in the treatment group could suggest a clinical benefit that is of interest after surgical endodontic treatment.

Present status and future directions: Surgical endodontics.

Endodontic surgery encompasses several procedures for the treatment of teeth with a history of failed root canal treatment, such as root-end surgery, crown and root resections, surgical perforation repair and intentional replantation. Endodontic microsurgery is the evolution of the traditional apicoectomy techniques and incorporates high magnification, ultrasonic root-end preparation and root-end filling with biocompatible filling materials. Modern endodontic surgery uses the dental operating microscope, incorporates cone-beam computed tomography (CBCT) for preoperative diagnosis and treatment planning, and has adopted piezoelectric approaches to osteotomy and root manipulation. Crown and root resection techniques have benefitted from the same technological advances. This review focuses on the current state of root-end surgery by comparing the techniques and materials applied during endodontic microsurgery to the most widely used earlier methods and materials. The most recent additions to the clinical protocol and technical improvements are discussed, and an outlook on future directions is given. Whilst nonsurgical retreatment remains the first choice to address most cases with a history of endodontic failure, modern endodontic microsurgery has become a predictable and minimally invasive alternative for the retention of natural teeth.

Outcome of Endodontic Microsurgery Using Mineral Trioxide Aggregate or Root Repair Material as Root-end Filling Material: A Randomized Controlled Trial with Cone-beam Computed Tomographic Evaluation.

INTRODUCTION: The purpose of this randomized clinical trial was to evaluate healing after endodontic microsurgery (EMS) using mineral trioxide aggregate (MTA) versus EndoSequence root repair material (RRM; Brasseler, Savannah, GA) as root-end filling materials. METHODS: Two hundred forty-three teeth with persistent or recurrent apical periodontitis were randomly assigned to either the MTA or RRM group. EMS was performed, and follow-up visits with clinical and radiographic investigation were scheduled at 6, 12, and 24 months with follow-up cone-beam computed tomographic (CBCT) imaging after 12 months. RESULTS: One hundred twenty teeth with an average follow-up of 15 months were evaluated. The overall success rate was 93.3% for periapical (PA) evaluation and 85% for CBCT evaluation. The RRM group exhibited 92% and 84% success rates as assessed on PA and CBCT imaging, respectively. The MTA group exhibited 94.7% and 86% success rates as assessed on PA and CBCT imaging, respectively. No significant difference was observed between the 2 groups. Microsurgical classification, root canal filling quality, root-end filling material depth, and root fracture were found to be significant outcome predictors. CONCLUSIONS: EMS is a predictable procedure with successful outcome both 2-dimensional and 3-dimensional radiographic evaluation when RRM or MTA was used as the root-end filling material.

Surgical management of vertical root fractures for posterior teeth: report of four cases.

INTRODUCTION: The objective of this article was to present a surgical treatment option for teeth with incomplete vertical root fracture in maxillary and mandibular posterior teeth. METHODS: Four cases are presented in which 1 endodontically treated maxillary or mandibular molar had an incomplete vertical root fracture involving 1 of the roots. The tooth underwent a flap elevation procedure to visualize the pattern of bone loss and assess the extent of root fracture. The fracture line was eliminated by resecting the root in a beveled manner, after which root-end preparation and root-end filling were performed by using mineral trioxide aggregate. The osteotomy was covered with an absorbable collagen membrane. Cases were followed up for 8-24 months after surgery. RESULTS: The procedure was shown to be predictable and successful in this series. Root length was preserved, and tooth extraction was avoided. CONCLUSIONS: The microsurgical treatment option for multirooted teeth with incomplete vertical root fracture resulted in long-term clinical success.

Cone-beam computed tomography in endodontics: are we there yet?

From digital radiography units to office computer systems, there are several pieces of equipment that make up today's high-tech dental office. Recently, advances in dental imaging have allowed cone-beam computed tomography (CBCT), which is a form of 3-dimensional radiography, to gain increasing popularity as another major office component. In consideration of the current economic conditions, cost has become a definite obstacle for many practitioners. With several brands available, this technology has nonetheless generated considerable attention for use in presurgical treatment planning and diagnosis. However, is there enough evidence for its use in endodontics? This article aims to bring to light the many exciting features of CBCT, including its operation, impact, and feasibility in endodontics.

Endodontic microsurgery.

The field of endodontics has seen vast improvements in technology and techniques over the past several years. Perhaps the one area of endodontics that has improved the most is the way in which surgery is performed. With the use of state-of-the-art instruments, new and improved materials, and a surgical operating microscope, the gap has narrowed between biological concepts and the ability to achieve consistently successful clinical results. The practice of these techniques is now referred to as endodontic microsurgery.

Endodontic microsurgery.

The field of endodontics has seen vast improvements in technology and techniques over the past several years. Perhaps the one area of endodontics that has improved the most is the way in which surgery is performed. With the use of state-of-the-art instruments, new and improved materials, and a surgical operating microscope, the gap has narrowed between biological concepts and the ability to achieve consistently successful clinical results. The practice of these techniques is now referred to as endodontic microsurgery.

Microscopic periradicular surgery: perioperative predictors for postoperative clinical outcomes and quality of life assessment.

The authors report on data from a self-assessment questionnaire filled out by 199 patients undergoing periradicular microscopic surgery at two private endodontic offices and at graduate endodontic clinics of the University of Pennsylvania. Regression analysis was performed using pain and swelling as dependent variables and age, sex, type of teeth, location, periapical lesion, and remedication as independent variables. Pain and swelling were significantly related to females and younger patients (p < 0.05). The results supported Etodolac as a pre- and postoperative analgesic and use of antibiotics restricted to high-risk patients. Maximum pain and swelling were reported at night and day 1 of the surgery, respectively. Generally, swelling was more often reported than pain. Surgeries in anterior maxilla were related to more pain and swelling. A majority of the patients (67%) rated surgical endodontics more pleasant than expected and found it less painful (46%) or the same (38%) as nonsurgical treatment. The results also point out that patients in general have negative beliefs and limited knowledge about periradicular surgery.

A comparison of three methods for preparing centered platforms around separated instruments in curved canals.

This study compared three methods for creating the most centered staging platform (SP) around separated instruments (SI) in curved canals. Green .04 ProFiles, notched at D(3), were separated in the apical third of 42 mesiobuccal canals of maxillary and mandibular molars. Teeth were divided into three groups. SPs were prepared in group 1 with Gates Gliddens (GG) to a size #3; group 2 with LightSpeed to a size 90; and group 3 with incrementally cut rotary .06 ProFiles to size 82. Pre- and postoperative digital radiographs were imported into AutoCAD to measure the deviation of SP from the head of the separated instrument. Pearson's correlation showed a positive relationship between deviation of the SP and the distance of the SI from the elbow of the canal. ANOVA showed that LightSpeed instruments were significantly more effective in preparing a centered staging platform around separated instruments in curved canals when compared to GG drills and ProFiles (p < 0.05).

The clinical significance and management of apical accessory canals in maxillary central incisors.

BACKGROUND: The maxillary central incisor is considered to be the least difficult subject for a clinical endodontic experience. However, the internal anatomy of maxillary central incisors can present a number of variations, including multiple accessory canals. CASE DESCRIPTION: This article highlights the clinical significance and management of accessory canals located in the apical one-third of maxillary central incisors. The authors present two case reports in which failure to detect the accessory canals led to root canal failure and subsequent surgical intervention. Another two case reports present the serendipitous discovery and nonsurgical management of accessory canals during the initial treatment of maxillary incisors. CONCLUSIONS AND CLINICAL IMPLICATIONS: It is important for the clinician to be able to detect the signs suggesting the presence of accessory canals in maxillary central incisors. Failure to do so may lead to a less-than-optimal endodontic treatment outcome.

Obturation of the root canal system.

With all the technology that has been introduced in endodontics, there are now several ways to instrument and obturate root canals. Practitioners often develop their own "hybrid" technique after sharing ideas with several colleagues. The purpose of this article is to describe a technique of obturation, hoping that others may incorporate some aspects into their own "hybrid" style.

Perforation repair and one-step apexification procedures.

As with any dental treatment, procedural mishaps can occur during root canal therapy. One such occurrence is the perforation of a root or pulpal floor. After a perforation occurs, the goals are to "sterilize" (decontaminate) the site and then seal the perforation. The material most widely used in endodontics to seal perforations is mineral trioxide aggregate (MTA). MTA us extremely biocompatible, and it has been shown historically that osteoidlike material grows right into MTA. The technique of one-step apexification offers an alternative to draw-out cases with several medicament-changing appointments that often result in a failed attempt at root-end closure. With the favorable histologic response of MTA, this material is the best current choice for this procedure. Completion of these cases in an effective and efficient way allows for permanent restorations to be done in a more timely manner, prolonging the longevity of these teeth.