Ready-to-be-addressed oxo-clusters: individualized, periodically organized and separated from the substrate.

Clusters and oxo-clusters are drawing attention for their amazing physical properties, especially at the scale of the single molecule. However, chemical methods to organize them individually on a surface are still lacking. In this study we show that it is possible to periodically organize individual polyoxometalates thanks to their ordering by a new supramolecular assembly.

D-π-A-Type Pyrazolo[1,5-a]pyrimidine-Based Hole-Transporting Materials for Perovskite Solar Cells: Effect of the Functionalization Position.

Donor−acceptor (D−A) small molecules are regarded as promising hole-transporting materials for perovskite solar cells (PSCs) due to their tunable optoelectronic properties. This paper reports the design, synthesis and characterization of three novel isomeric D-π-A small molecules PY1, PY2 and PY3. The chemical structures of the molecules consist of a pyrazolo[1,5-a]pyrimidine acceptor core functionalized with one 3,6-bis(4,4'-dimethoxydiphenylamino)carbazole (3,6-CzDMPA) donor moiety via a phenyl π-spacer at the 3, 5 and 7 positions, respectively. The isolated compounds possess suitable energy levels, sufficient thermal stability (Td > 400 °C), molecular glass behavior with Tg values in the range of 127−136 °C slightly higher than that of the reference material Spiro-OMeTAD (126 °C) and acceptable hydrophobicity. Undoped PY1 demonstrates the highest hole mobility (3 × 10−6 cm2 V−1 s−1) compared to PY2 and PY3 (1.3 × 10−6 cm2 V−1 s−1). The whole isomers were incorporated as doped HTMs in planar n-i-p PSCs based on double cation perovskite FA0.85Cs0.15Pb(I0.85Br0.15)3. The non-optimized device fabricated using PY1 exhibited a power conversion efficiency (PCE) of 12.41%, similar to that obtained using the reference, Spiro-OMeTAD, which demonstrated a maximum PCE of 12.58% under the same conditions. The PY2 and PY3 materials demonstrated slightly lower performance in device configuration, with relatively moderate PCEs of 10.21% and 10.82%, respectively, and slight hysteresis behavior (−0.01 and 0.02). The preliminary stability testing of PSCs is also described. The PY1-based device exhibited better stability than the device using Spiro-OMeTAD, which could be related to its slightly superior hydrophobic character preventing water diffusion into the perovskite layer.

Exciton Diffusion in Highly-Ordered One Dimensional Conjugated Polymers: Effects of Back-Bone Torsion, Electronic Symmetry, Phonons and Annihilation.

Many optoelectronic devices based on organic materials require rapid and long-range singlet exciton transport. Key factors controlling exciton transport include material structure, exciton-phonon coupling and electronic state symmetry. Here, we employ femtosecond transient absorption microscopy to study the influence of these parameters on exciton transport in one-dimensional conjugated polymers. We find that excitons with 21Ag- symmetry and a planar backbone exhibit a significantly higher diffusion coefficient (34 ± 10 cm2 s-1) compared to excitons with 11Bu+ symmetry (7 ± 6 cm2 s-1) with a twisted backbone. We also find that exciton transport in the 21Ag- state occurs without exciton-exciton annihilation. Both 21Ag- and 11Bu+ states are found to exhibit subdiffusive behavior. Ab initio GW-BSE calculations reveal that this is due to the comparable strengths of the exciton-phonon interaction and exciton coupling. Our results demonstrate the link between electronic state symmetry, backbone torsion and phonons in exciton transport in π-conjugated polymers.

The Atypical Hysteresis of [Fe(C6 F5 Tp)2 ]: Overlay of Spin-Crossovers and Symmetry-Breaking Phase Transition.

The [FeII (C6 F5 Tp)2 ] spin-crossover complex is an atypical molecular switch, which can be converted upon annealing between two archetypal spin-crossover behaviours: from an extremely gradual spin-crossover to a broad hysteretic spin-transition (of ca. 65 K). The hysteresis shows an uncommon "rounded shape" that is reproducible upon cycling temperature. In depth structural studies reveal a first crystal phase transition, which occurs upon melting and recrystallizing at high temperature. This first irreversible transition is associated with a radical change in the crystal packing. More importantly, the "rounded and broad" hysteretic transition is shown to occur in a non-cooperative SCO system and is associated with the occurrence of a symmetry-breaking phase transition that appears when roughly ca. 50 % of the SCO complexes are switched.

Photoactive Organic/Inorganic Hybrid Materials with Nanosegregated Donor-Acceptor Arrays.

The synthesis of the first mesogenic donor-acceptor polyoxometalate (POM)-based hybrid is herein described. The structural and electronic properties of the hybrid compound were evaluated through combination of small- and wide-angle X-ray scattering, optical microscopy, electrochemistry and photoluminescence. In the solid state, the compound behaves as a birefringent solid, displaying a lamellar organization in which double-layers of POMs and bis(thiophene)thienothiophene organic donors alternate regularly. Noticeably, the sub-unit organizations in the composite are similar to that observed for the individual POM and organic donor precursors. Photophysical studies show that in the hybrid, the fluorescence of the organic donor unit is considerably quenched both in solution and in the solid state, which is attributed to occurrence of intramolecular charge-separated state.

Electrospray ionization: an efficient approach to deposit polymetallic molecular switches onto gold surfaces.

Electrospray ionization (EI) deposition is proven efficient in obtaining monolayers of a polymetallic charge transfer complex on gold surfaces. The molecule's integrity is monitored by using PM-IRRAS and XPS. This approach broadens the perspective of molecular magnetic switch deposition, which is currently dominated by the thermal evaporation of monometallic spin crossover (SCO) complexes.

Dithia[3.3]paracyclophane Core: A Versatile Platform for Triplet State Fine-Tuning and Through-Space TADF Emission.

Thermally activated delayed fluorescence (TADF) based on through-space donor and acceptor interactions constitute a recent and promising approach to develop efficient TADF emitters. Novel TADF isomers using a dithia[3.3]-paracyclophane building block as a versatile 3D platform to promote through-space interactions are presented. Such a 3D platform allows to bring together the D and A units into close proximity and to probe the effect of their orientation, contact site and distance on their TADF emission properties. This study provides evidence that the dithia[3.3]paracyclophane core is a promising platform to control intramolecular through-space interactions and obtain an efficient TADF emission with short reverse-intersystem crossing (RISC) lifetimes. In addition, this study demonstrates that this design can tune the energy levels of the triplet states and leads to an upconversion from 3 CT to 3 LE that promotes faster and more efficient RISC to the 1 CT singlet state.

Probing the in-air growth of large area of 3D functional structures into a 2D supramolecular nanoporous network.

Surface-confined host-guest chemistry at the air/solid interface is used for trapping a functionalized 3D Zn-phthalocyanine complex into a 2D porous supramolecular template allowing the large area functionalization of an sp2-hybridized carbon-based substrate as evidenced by STM, resonance Raman spectroscopy, and water contact angle measurements.

Directed Organization of Platinum Nanocrystals through Organic Supramolecular Nanoporous Templates.

We propose a novel approach to trap 2 nm Pt nanocrystals using nanoporous two-dimensional supramolecular networks for cavity-confined host-guest recognition process. This will be achieved by taking advantage of two features of supramolecular self-assembly at surfaces: First, its capability to allow the formation of complex 2D architectures, more particularly, nanoporous networks, through noncovalent interactions between organic molecular building-blocks; second, the ability of the nanopores to selectively host and immobilize a large variety of guest species. In this paper, for the first time, we will use isotropic honeycomb networks and anisotropic linear porous supramolecular networks to host 2 nm Pt nanocrystals.

Charge-transfer dynamics and nonlocal dielectric permittivity tuned with metamaterial structures as solvent analogues.

Charge transfer (CT) is a fundamental and ubiquitous mechanism in biology, physics and chemistry. Here, we evidence that CT dynamics can be altered by multi-layered hyperbolic metamaterial (HMM) substrates. Taking triphenylene:perylene diimide dyad supramolecular self-assemblies as a model system, we reveal longer-lived CT states in the presence of HMM structures, with both charge separation and recombination characteristic times increased by factors of 2.4 and 1.7-that is, relative variations of 140 and 73%, respectively. To rationalize these experimental results in terms of driving force, we successfully introduce image dipole interactions in Marcus theory. The non-local effect herein demonstrated is directly linked to the number of metal-dielectric pairs, can be formalized in the dielectric permittivity, and is presented as a solid analogue to local solvent polarity effects. This model and extra PH3T:PC60BM results show the generality of this non-local phenomenon and that a wide range of kinetic tailoring opportunities can arise from substrate engineering. This work paves the way toward the design of artificial substrates to control CT dynamics of interest for applications in optoelectronics and chemistry.

Surface-Confined Supramolecular Self-Assembly of Molecular Nanocranes for Chemically Lifting and Positioning C60 above a Conducting Substrate.

2D supramolecular self-assembly is a good way to form well-defined nanostructures on various substrates. One of the current challenges is to extend this approach to 3D functional building blocks. Here, we address this issue by providing a strategy for the controlled lifting and positioning of functional units above a graphitic substrate. This is the first time that multistory cyclophane-based 3D tectons incorporating C60 units have been designed and synthesized. Molecular modelling provides a description of the 3D geometries and evidences the flexible character of the building blocks. Despite this later feature, the supramolecular self-assembly of Janus tectons on HOPG yields well-ordered adlayers incorporating C60 arrays at well-defined mean distances from the surface. As our approach is not limited to C60 , the results reported here open-up possibilities for applications where the topological and electronic interactions between the substrate and the functional unit are of prime importance.

A versatile strategy towards non-covalent functionalization of graphene by surface-confined supramolecular self-assembly of Janus tectons.

Two-dimensional (2D), supramolecular self-assembly at surfaces is now well-mastered with several existing examples. However, one remaining challenge to enable future applications in nanoscience is to provide potential functionalities to the physisorbed adlayer. This work reviews a recently developed strategy that addresses this key issue by taking advantage of a new concept, Janus tecton materials. This is a versatile, molecular platform based on the design of three-dimensional (3D) building blocks consisting of two faces linked by a cyclophane-type pillar. One face is designed to steer 2D self-assembly onto C(sp(2))-carbon-based flat surfaces, the other allowing for the desired functionality above the substrate with a well-controlled lateral order. In this way, it is possible to simultaneously obtain a regular, non-covalent paving as well as supramolecular functionalization of graphene, thus opening interesting perspectives for nanoscience applications.

Formation of hydroxyl-functionalized stilbenoid molecular sieves at the liquid/solid interface on top of a 1-decanol monolayer.

Specific molecular tectons can be designed to form molecular sieves through self-assembly at the solid-liquid interface. After demonstrating a model tecton bearing apolar alkyl chains, we then focus on a modified structure involving asymmetric functionalization of some alkyl chains with polar hydroxyl groups in order to get chemical selectivity in the sieving. As the formation of supramolecular self-assembled networks strongly depends on molecule-molecule, molecule-substrate and molecule-solvent interactions, we compared the tectons' self-assembly on graphite for two types of solvent. We demonstrate the possibility to create hydroxylated stilbenoid molecular sieves by using 1-decanol as a solvent. Interestingly, with this solvent, the porous network is developed on top of a 1-decanol monolayer.

Surface-confined self-assembled Janus tectons: a versatile platform towards the noncovalent functionalization of graphene.

A general strategy for simultaneously generating surface-based supramolecular architectures on flat sp(2) -hybridized carbon supports and independently exposing on demand off-plane functionality with controlled lateral order is highly desirable for the noncovalent functionalization of graphene. Here, we address this issue by providing a versatile molecular platform based on a library of new 3D Janus tectons that form surface-confined supramolecular adlayers in which it is possible to simultaneously steer the 2D self-assembly on flat C(sp(2))-based substrates and tailor the external interface above the substrate by exposure to a wide variety of small terminal chemical groups and functional moieties. This approach is validated throughout by scanning tunneling microscopy (STM) at the liquid-solid interface and molecular mechanics modeling studies. The successful self-assembly on graphene, together with the possibility to transfer the graphene monolayer onto various substrates, should considerably extend the application of our functionalization strategy.

An optimized alkyl chain-based binding motif for 2D self-assembly: a comprehensive crystallographic approach.

Taking into account substrate crystallographic constraints, an overarching molecular binding motif has been designed to allow transferable self-assembling patterns on different substrates. This optimized clip demonstrates robust and equivalent self-assembled architectures on both highly oriented pyrolitic graphite (HOPG) and reconstructed Au(111) surfaces.

Solution-growth kinetics and thermodynamics of nanoporous self-assembled molecular monolayers.

The temperature and concentration dependences of the self-assembly onto graphite from solution of a series of molecular building blocks able to form nanoporous structures are analyzed experimentally by in situ scanning tunneling microscopy. It is shown that the commonly observed coexistence of dense and nanoporous domains results from kinetic blockades rather than a thermodynamic equilibrium. The ripening can be favored by high densities of domain boundaries, which can be obtained by cooling the substrate before the nucleation and growth. Then ripening at higher-temperature yields large defect-free domains of a single structure. This thermodynamically stable structure can be either the dense or the nanoporous one, depending on the tecton concentration in the supernatant solution. A sharp phase transition from dense to honeycomb structures is observed at a critical concentration. This collective phenomenon is explained by introducing interactions between adsorbed molecules in the thermodynamic description of the whole system.

Patterning of pH sensitive fluorescent bipyridazine derivatives.

A pH sensitive pipeprazine substituted bipyridazine fluorophore, DPP-BPDZ was explored as a pH sensor in solution and thin film state. Greenish highly fluorescent solution of the DPP-BPDZ with fluorescence quantum yield of 0.63 showed fluorescence decrease as the acetic acid concentration of the media was increased. The fluorescence quenching was correlated linearly with the content of acetic acid dose and attributed to the protonation at the terminal piperazine group. An acid sensitive film was fabricated using a transparent polymeric host (PMMA) and the DPP-BPDZ dye molecules as a guest. The resultant bright green fluorescent film (1.4 microm thick) showed exponential decrease of the fluorescence intensity as the pH of the dipping solution was decreased. In the range of pH below 4.5, the film sensitivity to pH was higher than the pH range over 4.5. A patternable film sensor was fabricated by introducing a photo acid generator (PAG) layer on the dye layer. Fluorescence patterns was formed on the film sensor through a photo-mask by relatively weak power of UV light (0.4 mW/cm2). Fluorescent line patterns having 10 microm line width were obtained with high fluorescence contrast between the patterns.

Rodlike fluorescent pi-conjugated 3,3'-bipyridazine ligand: optical, electronic, and complexation properties.

We report on the design and synthesis of a new quadrupolar pi-conjugated 3,3'-bipyridazine D-A-D ligand. Its electronic and optical properties were investigated. Besides high fluorescence and pronounced solvatochromism, it exhibits an inherent electroactivity exploited to build an organic green light emitting device. Moreover, the ability of this ligand to complex metallic centers (Cu(I), Ni(II), Pt(II), and Ir(III)) was also investigated to access different geometries and to tune their electronic and optical properties. These preliminary results open up the synthesis of heavy-metal complexes to obtain phosphorescent emitters.