Amphiphilic (di-)gradient copoly(2-oxazoline)s are potent amyloid fibril formation inhibitors.

MOTIVATION: Amyloidoses are diseases caused by the accumulation of normally soluble proteins in the form of insoluble amyloids, leading to the gradual dysfunction and failure of various organs and tissues. Inhibiting amyloid formation is therefore an important therapeutic target. HYPOTHESIS: We hypothesized that mono- and di-gradient amphiphilic copolymers of hydrophilic 2-(m)ethyl-2-oxazoline and hydrophobic 2-aryl-2-oxazolines may inhibit amyloid fibril formation. EXPERIMENTS: In the model system with hen egg white lysozyme (HEWL) as amyloidogenic protein we determined the effect of these polymers on the amyloid formation by making use of the thioflavin T fluorescence, transmission electron microscopy, isothermal titration calorimetry, and dynamic light scattering. FINDINGS: We found that some gradient copolymers possess very potent concentration-dependent inhibitory effects on HEWL amyloid formation. Structure-activity relationship revealed that copolymers with higher ratios of aromatic monomeric units had stronger amyloid suppression effects, most plausibly due to the combination of hydrophobic and π-π interactions. The measurements also revealed that the polymers that inhibit amyloid formation most plausibly do so in the form of micelles that interact with the growing amyloid fibril ends, not with isolated HEWL molecules in solution. These findings suggest the potential use of these gradient copolymers as therapeutic agents for amyloidoses.

Influence of Hydrophobic Side-Chain Length in Amphiphilic Gradient Copoly(2-oxazoline)s on the Therapeutics Loading, Stability, Cellular Uptake and Pharmacokinetics of Nano-Formulation with Curcumin.

Due to the simple one-step preparation method and a promising application in biomedical research, amphiphilic gradient copoly(2-oxazoline)s are gaining more and more interest compared to their analogous block copolymers. In this work, the curcumin solubilization ability was tested for a series of amphiphilic gradient copoly(2-oxazoline)s with different lengths of hydrophobic side-chains, consisting of 2-ethyl-2-oxazoline as a hydrophilic monomer and 2-(4-alkyloxyphenyl)-2-oxazoline as a hydrophobic monomer. It is shown that the length of the hydrophobic side-chain in the copolymers plays a crucial role in the loading of curcumin onto the self-assembled nanoparticles. The kinetic stability of self-assembled nanoparticles studied using FRET shows a link between their integrity and cellular uptake in human glioblastoma cells. The present study demonstrates how minor changes in the molecular structure of gradient copoly(2-oxazoline)s can lead to significant differences in the loading, stability, cytotoxicity, cellular uptake, and pharmacokinetics of nano-formulations containing curcumin. The obtained results on the behavior of the complex of gradient copoly(2-oxazoline)s and curcumin may contribute to the development of effective next-generation polymeric nanostructures for biomedical applications.

The Japanese quail chorioallantoic membrane as a model to study an amphiphilic gradient copoly(2-oxazoline)s- based drug delivery system for photodynamic diagnosis and therapy research.

Amphiphilic gradient copoly(2-oxazoline)s are widely researched in the field of drug delivery. They could be used as a transport system for hydrophobic drugs such as hypericin (HYP). We prepared six gradient copolymers (EtOx)-grad-(ROPhOx) by living cationic ring-opening polymerization of a hydrophilic comonomer 2-ethyl-2-oxazoline (EtOx) and a hydrophobic comonomer 2-(4-alkyloxyphenyl)-2-oxazoline (ROPhOx), with different composition ratio (88:12 and 85:15) and three different alkyl chain lengths of alkyl (R) substituents. As an experimental model, Japanese quail chorioallantoic membrane (CAM) was used. The effect of nanoparticles loaded with HYP was evaluated by the changes of fluorescence intensity during photodynamic diagnosis (PDD) monitored under 405 nm LED light before administration, and 0,1,3 and 24 h after topical administration. The effectiveness of photodynamic therapy (PDT) (405 nm, 285 mW/cm2) applied 1h after the administration of HYP-loaded nanoparticles was evaluated using vascular damage score and histological sections. Molecular analysis was done by measuring angiogenesis-related gene expression by qPCR. The application of nanoparticles unloaded or loaded with HYP proved to be biocompatible, non-toxic, and undamaging to the CAM tissue, while they successfully altered the HYP fluorescence. We observed a possible anti-angiogenic potential of prepared nanoparticles, which could present an advantage for PDT used for tumour treatment.

Alkyl Chain Length in Poly(2-oxazoline)-Based Amphiphilic Gradient Copolymers Regulates the Delivery of Hydrophobic Molecules: A Case of the Biodistribution and the Photodynamic Activity of the Photosensitizer Hypericin.

Self-assembled nanostructures of amphiphilic gradient copoly(2-oxazoline)s have recently attracted attention as promising delivery systems for the effective delivery of hydrophobic anticancer drugs. In this study, we have investigated the effects of increasing hydrophobic side chain length on the self-assembly of gradient copolymers composed of 2-ethyl-2-oxazoline as the hydrophilic comonomer and various 2-(4-alkyloxyphenyl)-2-oxazolines as hydrophobic comonomers. We show that the size of the formed polymeric nanoparticles depends on the structure of the copolymers. Moreover, the stability and properties of the polymeric assembly can be affected by the loading of hypericin, a promising compound for photodiagnostics and photodynamic therapy (PDT). We have found the limitation that allows rapid or late release of hypericin from polymeric nanoparticles. The nanoparticles entering the cells by endocytosis decreased the hypericin-induced PDT, and the contribution of the passive process (diffusion) increased the probability of a stronger photoeffect. A study of fluorescence pharmacokinetics and biodistribution revealed differences in the release of hypericin from nanoparticles toward the quail chorioallantoic membrane, a preclinical model for in vivo studies, depending on the composition of polymeric nanoparticles. Photodamage induced by PDT in vivo well correlated with the in vitro results. All formulations studied succeeded in targeting hypericin at cancer cells. In conclusion, we demonstrated the promising potential of poly(2-oxazoline)-based gradient copolymers for effective drug delivery and sequential drug release needed for successful photodiagnostics and PDT in cancer therapy.

Effect of Dexamethasone on Thermoresponsive Behavior of Poly(2-Oxazoline) Diblock Copolymers.

Thermoresponsive polymers play an important role in designing drug delivery systems for biomedical applications. In this contribution, the effect of encapsulated hydrophobic drug dexamethasone on thermoresponsive behavior of diblock copolymers was studied. A small series of diblock copoly(2-oxazoline)s was prepared by combining thermoresponsive 2-n-propyl-2-oxazoline (nPrOx) and hydrophilic 2-methyl-2-oxazoline (MeOx) in two ratios and two polymer chain lengths. The addition of dexamethasone affected the thermoresponsive behavior of one of the copolymers, nPrOx20-MeOx180, in the aqueous medium by shifting the cloud point temperature to lower values. In addition, the formation of microparticles containing dexamethasone was observed during the heating of the samples. The morphology and number of microparticles were affected by the structure and concentration of copolymer, the drug concentration, and the temperature. The crystalline nature of formed microparticles was confirmed by polarized light microscopy, confocal Raman microscopy, and wide-angle X-ray scattering. The results demonstrate the importance of studying drug/polymer interactions for the future development of thermoresponsive drug carriers.

Cell-Mediated Immunoreactivity of Poly(2-isopropenyl-2-oxazoline) as Promising Formulation for Immunomodulation.

Poly(2-isopropenyl-2-oxazoline) (PIPOx) represents a functional polymer with high potential for drug delivery, tissue engineering, and immunomodulation. The immunomodulatory efficiency of the PIPOx formulation has been studied in vitro following splenic cells and RAW 264.7 macrophages exposition. The cell-specific immunomodulative effect on production of Th1, Th2, Th17, and Treg signature cytokines has been demonstrated. The impact on the functionality of PIPOx-sensitized RAW 264.7 macrophages was assessed by cell phagocytosis. Time- and concentration-dependent cell internalization and intracellular organelles colocalization of fluorescently labeled PIPOx has been examined. The in vitro results demonstrated the PIPOx bioavailability and the capability of triggering immune cell responses resulting in the induced production of cell-specific signature interleukins, important prerequisite properties for future potential biomedical applications.

Diclofenac Embedded in Silk Fibroin Fibers as a Drug Delivery System.

Silk fibroin is a biocompatible, non-toxic, mechanically robust protein, and it is commonly used and studied as a material for biomedical applications. Silk fibroin also gained particular interest as a drug carrier vehicle, and numerous silk formats have been investigated for this purpose. Herein, we have prepared electrospun nanofibers from pure silk fibroin and blended silk fibroin/casein, followed by the incorporation of an anti-inflammatory drug, diclofenac. Casein serves as an excipient in pharmaceutical products and has a positive effect on the gradual release of drugs. The characteristics of the investigated composites were estimated by scanning electron microscope, transmission electron microscope, thermogravimetric analysis, and a lifetime of diclofenac by electron paramagnetic resonance analysis. The cumulative release in vitro of diclofenac sodium salt, together with the antiproliferative effect of diclofenac sodium salt-loaded silk nanofibers against the growth of two cancer cell lines, are presented and discussed.

Soft Hydrogel Zwitterionic Coatings Minimize Fibroblast and Macrophage Adhesion on Polyimide Substrates.

Minimizing the foreign body reaction to polyimide-based implanted devices plays a pivotal role in several biomedical applications. In this work, we propose materials exhibiting nonbiofouling properties and a Young's modulus reflecting that of soft human tissues. We describe the synthesis, characterization, and in vitro validation of poly(carboxybetaine) hydrogel coatings covalently attached to polyimide substrates via a photolabile 4-azidophenyl group, incorporated in poly(carboxybetaine) chains at two concentrations of 1.6 and 3.1 mol %. The presence of coatings was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy. White light interferometry was used to evaluate the coating continuity and thickness (between 3 and 6 µm under dry conditions). Confocal laser scanning microscopy allowed us to quantify the thickness of the swollen hydrogel coatings that ranged between 13 and 32 µm. The different hydrogel formulations resulted in stiffness values ranging from 2 to 19 kPa and led to different fibroblast and macrophage responses in vitro. Both cell types showed a minimum adhesion on the softest hydrogel type. In addition, both the overall macrophage activation and cytotoxicity were observed to be negligible for all of the tested material formulations. These results are a promising starting point toward future advanced implantable systems. In particular, such technology paves the way for novel neural interfaces able to minimize the fibrotic reaction, once implanted in vivo, and to maximize their long-term stability and functionality.

Investigation of drug release modulation from poly(2-oxazoline) micelles through ultrasound.

Among external stimuli used to trigger release of a drug from a polymeric carrier, ultrasound has gained increasing attention due to its non-invasive nature, safety and low cost. Despite this attention, there is only limited knowledge about how materials available for the preparation of drug carriers respond to ultrasound. This study investigates the effect of ultrasound on the release of a hydrophobic drug, dexamethasone, from poly(2-oxazoline)-based micelles. Spontaneous and ultrasound-mediated release of dexamethasone from five types of micelles made of poly(2-oxazoline) block copolymers, composed of hydrophilic poly(2-methyl-2-oxazoline) and hydrophobic poly(2-n-propyl-2-oxazoline) or poly(2-butyl-2-oxazoline-co-2-(3-butenyl)-2-oxazoline), was studied. The release profiles were fitted by zero-order and Ritger-Peppas models. The ultrasound increased the amount of released dexamethasone by 6% to 105% depending on the type of copolymer, the amount of loaded dexamethasone, and the stimulation time point. This study investigates for the first time the interaction between different poly(2-oxazoline)-based micelle formulations and ultrasound waves, quantifying the efficacy of such stimulation in modulating dexamethasone release from these nanocarriers.

Unravelling the Excellent Chemical Stability and Bioavailability of Solvent Responsive Curcumin-Loaded 2-Ethyl-2-oxazoline-grad-2-(4-dodecyloxyphenyl)-2-oxazoline Copolymer Nanoparticles for Drug Delivery.

A new gradient copolymer has been synthesized by the living cationic ring-opening polymerization of hydrophilic 2-ethyl-2-oxazoline with lipophilic 2-(4-dodecyloxyphenyl)-2-oxazoline (EtOx-grad-DPOx). The prepared copolymer is capable of assembling in water to yield polymeric nanoparticles that are successfully loaded with an anticancer agent, curcumin. Self-assembly of the copolymer was found to be tuned by the polarity as well as the hydrogen bonding ability of solvents. Solvent took distinctive role in the preparation of unloaded and curcumin-loaded nanoparticles. The stability of the nanoparticles was increased by curcumin loading promoted by curcumin-polymer interactions. Further, the chemical stability of curcumin in water is largely enhanced inside the polymeric nanoparticles. Curcumin-loaded (EtOx-grad-DPOx) copolymer nanoparticles showed excellent stability in the biological medium, low cytotoxicity, and concentration dependent uptake by U87 MG and HeLa cells, which indicate the possibility of their efficient application in drug delivery.

Ex Vivo and In Vitro Studies on the Cytotoxicity and Immunomodulative Properties of Poly(2-isopropenyl-2-oxazoline) as a New Type of Biomedical Polymer.

Poly(2-alkenyl-2-oxazoline)s are promising functional polymers for a variety of biomedical applications, such as drug delivery systems, peptide conjugates, or gene delivery. In this study, poly(2-isopropenyl-2-oxazoline) (PIPOx) is prepared through free-radical polymerization initiated with azobisisobutyronitrile. Reactive 2-oxazoline units in the side chain support an addition reaction with different compounds containing a carboxylic group, which facilitates the preparation of polymers labeled with two different fluorescent dyes. The cytotoxicities of 2-oxazoline monomers, PIPOx, and fluorescently labeled PIPOx are evaluated in vitro using an 3-(4,5-Dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay and ex vivo using a cell proliferation assay with adenosine triphosphate bioluminescence. The cell uptake of labeled PIPOx is used to determine the colocalization of PIPOx with cell organelles that are part of the endocytic pathway. For the first time, it is shown that poly(2-isopropenyl-2-oxazoline) is a biocompatible material and is suitable for biomedical applications; further, its immunomodulative properties are evaluated.

Delayed adverse effects of neonatal exposure to polymeric nanoparticle poly(ethylene glycol)-block-polylactide methyl ether on hypothalamic-pituitary-ovarian axis development and function in Wistar rats.

We studied delayed effects of neonatal exposure to polymeric nanoparticle poly(ethylene glycol)-block-polylactide methyl ether (PEG-b-PLA) on the endpoints related to pubertal development and reproductive function in female Wistar rats from postnatal day 4 (PND4) to PND 176. Female pups were injected intraperitoneally, daily, from PND4 to PND7 with PEG-b-PLA (20 or 40mg/kg b.w.). Both doses of PEG-b-PLA accelerated the onset of vaginal opening compared with the control group. In the low-dose PEG-b-PLA-treated group, a significantly reduced number of regular estrous cycles, increased pituitary weight due to hyperemia, vascular dilatation and congestion, altered course of hypothalamic gonadotropin-releasing hormone-stimulated luteinizing hormone secretion, and increased progesterone serum levels were observed. The obtained data indicate that neonatal exposure to PEG-b-PLA might affect the development and function of hypothalamic-pituitary-ovarian axis (HPO), and thereby alter functions of the reproductive system in adult female rats. Our study indicates a possible neuroendocrine disrupting effect of PEG-b-PLA nanoparticles.

In vitro study of partially hydrolyzed poly(2-ethyl-2-oxazolines) as materials for biomedical applications.

Polymers based on 2-oxazoline, such as poly(2-ethyl-2-oxazolines) (PETOx), are considered to be a type of 'pseudopeptide' with the ability to form novel biomaterials. The hydrolysis of PETOx was carried out to evaluate its use in biomedical applications. In the present work, PETOx samples with a range of molar masses were prepared by living cationic polymerization. Hydrolysis was carried out at time intervals ranging from 15 to 180 min to prepare copolymers with different amounts of ethylene imine units. (1)H NMR spectroscopy was used to identify the structure of the hydrolyzed polymers. The dependence of in vitro cell viability on the degree of hydrolysis was determined using three different model cell lines, namely, mouse embryonic 3T3 fibroblasts, pancreatic ßTC3 cells, and mouse lymphoid macrophages P388.D1. It was demonstrated that increasing the degree of hydrolysis decreased cell viability for all cell types. Fibroblast cells displayed the highest tolerance; additionally, the effect of polymer size showed no observable significance. Macrophage cells, immune system representatives, displayed the highest sensitivity to contact with hydrolyzed PETOx. The effect of polymer hydrolysis, polymer concentration and the incubation time on cell viability was experimentally observed. Confocal laser-scanning microscopy provided evidence of cellular uptake of pyrene-labeled (co)polymers.

Immunomodulatory efficiency of poly(2-oxazolines).

Poly(2-oxazolines) represent promising polymer materials for biomedical applications. The activation of mouse lymphoid macrophage line P388.D1 (clone 3124) by two selected representatives of poly(2-oxazolines), namely poly(2-ethyl-2-oxazoline) (PETOX100) and poly[2-(4-aminophenyl)-2-oxazoline-co-2-ethyl-2-oxazoline] (AEOX10), was assessed in vitro. The immunomodulatory efficacy of both polymers was evaluated via the induced release of pro-inflammatory cytokines (TNF-α, IL-1α and IL-6) and the acceleration of reactive free radicals. The present study revealed effective structure-immunomodulating associations of AEOX10 and PETOX100, which are desirable in biomedical and pharmaceutical applications of aliphatic and aromatic poly (2-oxazolines) in vivo.

In vitro bio-immunological and cytotoxicity studies of poly(2-oxazolines).

Poly(2-oxazolines) with varying alkyl chain lengths (e.g., methyl, ethyl, aryl) and molar masses have been tested for cell cytotoxicity in vitro. A standard 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay was used for the estimation of cell viability. Two monomers, 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline, were found to provide polymers with non-cytotoxic properties. The dependence of cell viability on molar mass confirmed the expected trend; the viability increased with the higher molar mass of poly(2-ethyl-2-oxazoline) (PETOX), up to 15,000 g/mol. The results obtained for the polymers with aliphatic side chains were compared with the analogues that possessed an aromatic moiety. All results confirmed low cytotoxicity of the polymers prepared by cationic polymerization of 2-alkyl- and 2-aryl-2-oxazolines, which supports their utilization in biomedical applications. Fluorescence microscopy and steady-state fluorescence were used to observe pyrene-labeled polymer interactions with living cells. Polymer accumulated within the cells was found to be dependent on polymer concentration in media. The immunoefficiency of aromatic and aliphatic oxazoline polymers and copolymers was also studied. Phagocytic and metabolic activities of macrophages were used to assess the immunosuppressive effects of the selected copolymers for possible applications in drug delivery and immunobiology. Overall, the tested polymers demonstrated no significant influences on the cellular immunological parameters.

Preparation of synthetic polyoxazoline based carrier and Vibrio cholerae O-specific polysaccharide conjugate vaccine.

Multiple chemical attachments of carbohydrate antigens to linear polymer represent promising technique for creating biologically effective conjugates. A novel conjugate consisting of detoxified lipopolysaccharide of Vibrio cholerae O135, linear polymer (polyoxazoline copolymer, serving as a matrix) and BSA (as immunogenic protein), has been prepared. The reaction conditions were optimized for obtaining high degree of conjugation. Analytical methods were evaluated to characterize conjugates obtained. Proposed chemistry is suitable for preparation of multivalent glycoconjugates in general.

2-(2-Oxazolin-2-yl)benzene-1,4-diol: X-ray and density functional theory studies.

In the crystal structure of the title compound, C(9)H(9)NO(3), there are strong intramolecular O-H...N and intermolecular O-H...O hydrogen bonds which, together with weak intermolecular C-H...O hydrogen bonds, lead to the formation of infinite chains of molecules. The calculated intermolecular hydrogen-bond energies are -11.3 and -2.7 kJ mol(-1), respectively, showing the dominant role of the O-H...O hydrogen bonding. A natural bond orbital analysis revealed the electron contribution of the lone pairs of the oxazoline N and O atoms, and of the two hydroxy O atoms, to the order of the relevant bonds.

2-(4-Hydroxyphenyl)-4,4-dimethyl-2-oxazoline: X-ray and density functional theory study.

In the crystal structure of the title compound, C(11)H(13)NO(2), there are strong intermolecular O-H...N hydrogen bonds which, together with weak intramolecular C-H...O hydrogen bonds, lead to the formation of infinite chains of molecules, held together by weak intermolecular C-H...O hydrogen bonds. A theoretical investigation of the hydrogen bonding, based on density functional theory (DFT) employing periodic boundary conditions, is in agreement with the experimental data. The cluster approach shows that the influence of the crystal field and of hydrogen-bond formation are responsible for the deformation of the 2-oxazoline ring, which is not planar and adopts a (4)T(3) ((C3)T(C2)) conformation.

Three isomeric forms of hydroxyphenyl-2-oxazoline: 2-(2-hydroxyphenyl)-2-oxazoline, 2-(3-hydroxyphenyl)-2-oxazoline and 2-(4-hydroxyphenyl)-2-oxazoline.

Crystal structures are reported for three isomeric compounds, namely 2-(2-hydroxyphenyl)-2-oxazoline, (I), 2-(3-hydroxyphenyl)-2-oxazoline, (II), and 2-(4-hydroxyphenyl)-2-oxazoline, (III), all C9H9NO2 [systematic names: 2-(4,5-dihydro-1,3-oxazol-2-yl)phenol, (I), 3-(4,5-dihydro-1,3-oxazol-2-yl)phenol, (II), and 4-(4,5-dihydro-1,3-oxazol-2-yl)phenol, (III)]. In these compounds, the deviation from coplanarity of the oxazoline and benzene rings is dependent on the position of the hydroxy group on the benzene ring. The coplanar arrangement in (I) is stabilized by a strong intramolecular O-H...N hydrogen bond. Surprisingly, the 2-oxazoline ring in molecule B of (II) adopts a 3T4 (C2TC3) conformation, while the 2-oxazoline ring in molecule A, as well as that in (I) and (III), is nearly planar, as expected. Tetramers of molecules of (II) are formed and they are bound together via weak C-H...N hydrogen bonds. In (III), strong intermolecular O-H...N hydrogen bonds and weak intramolecular C-H...O hydrogen bonds lead to the formation of an infinite chain of molecules perpendicular to the b direction. This paper also reports a theoretical investigation of hydrogen bonds, based on density functional theory (DFT) employing periodic boundary conditions.