Modulating temperature for Cu2ZnSnS4 (CZTS) synthesis via hot injection method and studying the photocatalytic efficiencies for the degradation of rhodamine 6G and methylene blue pollutants.

Cu2ZnSnS4 (CZTS) was synthesized following hot injection method and the process was optimized by varying temperature conditions. Four samples at different temperatures viz., 200, 250, 300 and 350 °C were prepared and analyzed using different characterization techniques. Based on the correlation between XRD, Raman and XPS, we conclude that the formation of ZnS and SnS2 occurs at 350 °C but at 200 °C there is no breakdown of the complex as per XRD. According to Raman and XPS analysis, as the temperature rises, the bonds between the metals become weaker, which is visibly seen in Raman and XPS due to the minor peaks of copper sulfide. Scanning electron microscopic analysis confirmed nanometric particles which increase in size with temperature. The photocatalytic evaluation showed that CZTS synthesized at 200 °C performed efficiently in the removal of the two colorants, methylene blue and Rhodamine 6G, achieving 92.80% and 90.65%, respectively. The photocatalytic degradation efficiencies decreased at higher temperatures due to bigger sized CZTS particles as confirmed by SEM results. Computational simulations confirm that CZTS has a highly negative energy -25,764 Ry, confirming its structural stability and higher covalent than ionic character.

Ultrafast Formation of Charge Transfer Trions at Molecular-Functionalized 2D MoS2 Interfaces.

In this work, we investigate trion dynamics occurring at the heterojunction between organometallic molecules and a monolayer transition metal dichalcogenide (TMD) with transient electronic sum frequency generation (tr-ESFG) spectroscopy. By pumping at 2.4 eV with laser pulses, we have observed an ultrafast hole transfer, succeeded by the emergence of charge-transfer trions. This observation is facilitated by the cancellation of ground state bleach and stimulated emission signals due to their opposite phases, making tr-ESFG especially sensitive to the trion formation dynamics. The presence of charge-transfer trion at molecular functionalized TMD monolayers suggests the potential for engineering the local electronic structures and dynamics of specific locations on TMDs and offers a potential for transferring unique electronic attributes of TMD to the molecular layers.

Role of Mass Transport in Electrochemical CO2 Reduction to Methanol Using Immobilized Cobalt Phthalocyanine.

Electrochemical CO2 reduction (CO2R) using heterogenized molecular catalysts usually yields 2-electron reduction products (CO, formate). Recently, it has been reported that certain preparations of immobilized cobalt phthalocyanine (CoPc) produce methanol (MeOH), a 6-electron reduction product. Here, we demonstrate the significant role of intermediate mass transport in CoPc selectivity to methanol. We first developed a simple, physically mixed, polymer (and polyfluoroalkyl, PFAS)-free preparation of CoPc on multiwalled carbon nanotubes (MWCNTs) which can be integrated onto Au electrodes using a poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) adhesion layer. After optimization of catalyst preparation and loading, methanol Faradaic efficiencies and partial current densities of 36% (±3%) and 3.8 (±0.5) mA cm-2, respectively, are achieved in the CO2-saturated aqueous electrolyte. The electrolyte flow rate has a large effect. A linear flow velocity of 8.5 cm/min produces the highest MeOH selectivity, with higher flow rates increasing CO selectivity and lower flow rates increasing the hydrogen evolution reaction, suggesting that CO is an unbound intermediate. Using a continuum multiphysics model assuming CO is the intermediate, we show qualitative agreement with the optimal inlet flow rate. Polymer binders were not required to achieve a high Faradaic efficiency for methanol using CoPc and MWCNTs. We also investigated the role of formaldehyde as an intermediate and the role of strain, but definitive conclusions could not be established.

A Resilient Platform for the Discrete Functionalization of Gold Surfaces Based on N-Heterocyclic Carbene Self-Assembled Monolayers.

We describe the synthesis and characterization of a versatile platform for gold functionalization, based on self-assembled monolayers (SAMs) of distal-pyridine-functionalized N-heterocyclic carbenes (NHC) derived from bis(NHC) Au(I) complexes. The SAMs are characterized using polarization-modulation infrared reflectance-absorption spectroscopy, surface-enhanced Raman spectroscopy, and X-ray photoelectron spectroscopy. The binding mode is examined computationally using density functional theory, including calculations of vibrational spectra and direct comparisons to the experimental spectroscopic signatures of the monolayers. Our joint computational and experimental analyses provide structural information about the SAM binding geometries under ambient conditions. Additionally, we examine the reactivity of the pyridine-functionalized SAMs toward H2SO4 and W(CO)5(THF) and verify the preservation of the introduced functionality at the interface. Our results demonstrate the versatility of N-heterocyclic carbenes as robust platforms for on-surface acid-base and ligand exchange reactions.

In situ x-ray absorption investigations of a heterogenized molecular catalyst and its interaction with a carbon nanotube support.

A highly active heterogenized molecular CO2 reduction catalyst on a conductive carbon support is investigated to identify if its improved catalytic activity can be attributed to strong electronic interactions between catalyst and support. The molecular structure and electronic character of a [Re+1(tBu-bpy)(CO)3Cl] (tBu-bpy = 4,4'-tert-butyl-2,2'-bipyridine) catalyst deposited on multiwalled carbon nanotubes are characterized using Re L3-edge x-ray absorption spectroscopy under electrochemical conditions and compared to the homogeneous catalyst. The Re oxidation state is characterized from the near-edge absorption region, while structural changes of the catalyst are assessed from the extended x-ray absorption fine structure under reducing conditions. Chloride ligand dissociation and a Re-centered reduction are both observed under applied reducing potential. The results confirm weak coupling of [Re(tBu-bpy)(CO)3Cl] with the support, since the supported catalyst exhibits the same oxidation changes as the homogeneous case. However, these results do not preclude strong interactions between a reduced catalyst intermediate and the support, preliminarily investigated here using quantum mechanical calculations. Thus, our results suggest that complicated linkage schemes and strong electronic interactions with the initial catalyst species are not required to improve the activity of heterogenized molecular catalysts.

Amine Hole Scavengers Facilitate Both Electron and Hole Transfer in a Nanocrystal/Molecular Hybrid Photocatalyst.

A well-known catalyst, fac-Re(4,4'-R2-bpy)(CO)3Cl (bpy = bipyridine; R = COOH) (ReC0A), has been widely studied for CO2 reduction; however, its photocatalytic performance is limited due to its narrow absorption range. Quantum dots (QDs) are efficient light harvesters that offer several advantages, including size tunability and broad absorption in the solar spectrum. Therefore, photoinduced CO2 reduction over a broad range of the solar spectrum could be enabled by ReC0A catalysts heterogenized on QDs. Here, we investigate interfacial electron transfer from Cd3P2 QDs to ReC0A complexes covalently bound on the QD surface, induced by photoexcitation of the QD. We explore the effect of triethylamine, a sacrificial hole scavenger incorporated to replenish the QD with electrons. Through combined transient absorption spectroscopic and computational studies, we demonstrate that electron transfer from Cd3P2 to ReC0A can be enhanced by a factor of ∼4 upon addition of triethylamine. We hypothesize that the rate enhancement is a result of triethylamine possibly altering the energetics of the Cd3P2-ReC0A system by interacting with the quantum dot surface, deprotonation of the quantum dot, and preferential solvation, resulting in a shift of the conduction band edge to more negative potentials. We also observe the rate enhancement in other QD-electron acceptor systems. Our findings provide mechanistic insights into hole scavenger-quantum dot interactions and how they may influence photoinduced interfacial electron transfer processes.

Synthesis, structure and reactivity of µ3-SnH capped trinuclear nickel cluster.

Treatment of the trichlorotin-capped trinuclear nickel cluster, [Ni3(dppm)3(µ3-Cl)(µ3-SnCl3)], 1, with 4 eq. NaHB(Et)3 yields a µ3-SnH capped trinuclear nickel cluster, [Ni3(dppm)3(µ3-H)(µ3-SnH)], 2 [dppm = bis(diphenylphosphino)methane]. Single-crystal X-ray diffraction, nuclear magnetic resonance (NMR) spectroscopy, and computational studies together support that cluster 2 is a divalent tin hydride. Complex 2 displays a wide range of reactivity including oxidative addition of bromoethane across the Sn center. Addition of 1 eq. iodoethane to complex 2 releases H2 (g) and generates an ethyltin-capped nickel cluster with a µ3-iodide, [Ni3(dppm)3(µ3-I)(µ3-Sn(CH2CH3))], 4. Notably, insertion of alkynes into the Sn-H bond of 2 can be achieved via addition of 1 eq. 1-hexyne to generate the 1-hexen-2-yl-tin-capped nickel cluster, [Ni3(dppm)3(µ3H)(µ3-Sn(C6H11))], 5. Addition of H2 (g) to 5 regenerates the starting material, 2, and hexane. The formally 44-electron cluster 2 also displays significant redox chemistry with two reversible one-electron oxidations (E = -1.3 V, -0.8 V vs. Fc0/+) and one-electron reduction process (E = -2.7 V vs. Fc0/+) observed by cyclic voltammetry.

PM-IRRAS and DFT investigation of the surface orientation of new Ir piano-stool complexes attached to Au(111).

Surface immobilization of organometallic catalysts is a promising approach to developing new catalytic systems that combine molecular catalysts with heterogenous surfaces to probe surface mechanisms. The orientation of the catalyst relative to the surface is one important parameter that must be considered in such hybrid systems. In this work, we synthesize three new sulfide-modified Ir piano-stool complexes with sulfide-modified bipyridine and phenylpyridine ligands for the attachment to Au(111) surfaces. Self-assembled monolayers made from (Cp*Ir(2,2'-bipyridine-4-sulfide)Cl)2[Cl]2 (C1m) and [Cp*Ir(2-phenylpyridine-4-sulfide)Cl]2 (C2m) were characterized by combining polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) with DFT calculations of the minimum energy orientations of the complexes on the surface. We find that the bipyridine and phenylpyridine ligands are oriented at between 73-77° relative to the surface normal, irrespective of the orientation of the other ligands. Additionally, DFT and PM-IRRAS support that there is no orientation preference for C1m and C2m, with both orientations present on the surface.

Sub-Nanometer Mapping of the Interfacial Electric Field Profile Using a Vibrational Stark Shift Ruler.

The characterization of electrical double layers is important since the interfacial electric field and electrolyte environment directly affect the reaction mechanisms and catalytic rates of electrochemical processes. In this work, we introduce a spectroscopic method based on a Stark shift ruler that enables mapping the electric field strength across the electric double layer of electrode/electrolyte interfaces. We use the tungsten-pentacarbonyl(1,4-phenelenediisocyanide) complex attached to the gold surface as a molecular ruler. The carbonyl (CO) and isocyanide (NC) groups of the self-assembled monolayer (SAM) provide multiple vibrational reporters situated at different distances from the electrode. Measurements of Stark shifts under operando electrochemical conditions and direct comparisons to density functional theory (DFT) simulations reveal distance-dependent electric field strength from the electrode surface. This electric field profile can be described by the Gouy-Chapman-Stern model with Stern layer thickness of ∼4.5 Å, indicating substantial solvent and electrolyte penetration within the SAM. Significant electro-induction effect is observed on the W center that is ∼1.2 nm away from the surface despite rapid decay of the electric field (∼90%) within 1 nm. The applied methodology and reported findings should be particularly valuable for the characterization of a wide range of microenvironments surrounding molecular electrocatalysts at electrode interfaces and the positioning of electrocatalysts at specific distances from the electrode surface for optimal functionality.

The electrochemical reduction of a flexible Mn(II) salen-based metal-organic framework.

A new metal-organic framework (MOF) containing a Mn(II) salen complex (BET surface area = 967 ± 6 m2 g-1) undergoes a reversible crystalline-to-amorphous transformation. Experimental studies and computational calculations show that the MOF is stable to a one-electron reduction at more anodic potentials than the corresponding discrete complex.

Vibrational Stark shift spectroscopy of catalysts under the influence of electric fields at electrode-solution interfaces.

External control of chemical processes is a subject of widespread interest in chemical research, including control of electrocatalytic processes with significant promise in energy research. The electrochemical double-layer is the nanoscale region next to the electrode/electrolyte interface where chemical reactions typically occur. Understanding the effects of electric fields within the electrochemical double layer requires a combination of synthesis, electrochemistry, spectroscopy, and theory. In particular, vibrational sum frequency generation (VSFG) spectroscopy is a powerful technique to probe the response of molecular catalysts at the electrode interface under bias. Fundamental understanding can be obtained via synthetic tuning of the adsorbed molecular catalysts on the electrode surface and by combining experimental VSFG data with theoretical modelling of the Stark shift response. The resulting insights at the molecular level are particularly valuable for the development of new methodologies to control and characterize catalysts confined to electrode surfaces. This Perspective article is focused on how systematic modifications of molecules anchored to surfaces report information concerning the geometric, energetic, and electronic parameters of catalysts under bias attached to electrode surfaces.

Investigation of Immobilization Effects on Ni(P2N2)2 Electrocatalysts.

A new synthetic route to complexes of the type Ni(P2N2)22+ with highly functionalized phosphine substituents and the investigation of immobilization effects on these catalysts is reported. Ni(P2N2)22+ complexes have been extensively studied as homogeneous and surface-attached molecular electrocatalysts for the hydrogen evolution reaction (HER). A synthesis based on postsynthetic modification of PArBr2NPh2 was developed and is described here. Phosphonate-modified ligands and their corresponding nickel complexes were isolated and characterized. Subsequent deprotection of the phosphonic ester derivatives provided the first Ni(P2N2)22+ catalyst that can be covalently attached via pendent phosphonate groups to an electrode without involvement of the important pendent amine groups. Mesoporous TiO2 electrodes were surface modified by attachment of the new phosphonate functionalized Ni(P2N2)22+ complexes, and these provided electrocatalytic materials that proved to be competent and stable for sustained HER in aqueous solution at mild pH and low overpotential. We directly compared the new ligand to a previously reported complex that utilized the amine moiety for surface attachment. Using HER as the benchmark reaction, the P-attached catalyst showed a marginally (9-14%) higher turnover number than its N-attached counterpart.

Full Conformational Analyses of the Ultrafast Isomerization in Penta-coordinated Ru(S2C2(CF3)2)(CO)(PPh3)2: One Compound, Two Crystal Structures, Three CO Frequencies, 24 Stereoisomers, and 48 Transition States.

The stereodynamics of an ultrafast (picosecond) isomerization in a penta-coordinated ruthenium complex, Ru(S2C2(CF3)2)(CO)(PPh3)2, were characterized by density functional theory (DFT). The ruthenium complex crystallizes in two almost-square pyramidal (SP) forms. The violet form has an apical PPh3 ligand, the orange form has an apical CO ligand, and their solution displays three CO stretching frequencies. With 4 possible centers of chirality (1 ruthenium, 2 phosphines, and 1 dithiolate), there are 24 stereoisomers. DFT calculations of these stereoisomers show structures ranging from almost-perfect SP (τ5 ≈ 0) to structures significantly distorted toward trigonal bipyramidal (TBP) (τ5 ≈ 0.6). The stereoisomers fall neatly into three groups, with νCO ≈ 1960 cm-1, 1940 cm-1, and 1980 cm-1. These isomers were found to interconvert over relatively small barriers via Ru-S bond twisting, CF3 rotation, phenyl twisting, PPh3 rotation, and, in some cases, by coupled motions. The composite energy surface for each CO frequency group shows that interconversions among the low-energy structures are possible via both the direct and indirect pathways, while the indirect pathway via isomers in the νCO ≈ 1980 cm-1 group is more favorable, which is a result consistent with recent experimental work. This work provides the first complete mechanistic picture of the ultrafast isomerization of penta-coordinated, distorted SP, d6-transition-metal complexes.

Electronic Structural Studies of the Ru3(III,II,II) Mixed-Valent State of Oxo-Centered Triruthenium Clusters.

The anionic state of basic ruthenium acetate complexes of the type [Ru3O(OAc)6](CO)(L1)(L2) (L = 4-cyanopyridine, pyridine, and N,N-dimethylaminopyridine) feature pronounced optical transitions in the near-infrared region indicative of strongly coupled mixed-valence states. A series of these clusters was prepared and studied spectroscopically in tandem with density functional theory (DFT) computational results to construct an orbital structure-function description of how the electron density is shared between the ruthenium centers in this mixed-valent state. The mixed-valency manifests itself as a combination of the nonbonding atomic orbitals of the equivalent ruthenium centers, with increased energetic splitting between the orbitals with symmetries appropriate for more efficient electronic communication. This DFT-based model agrees with the Marcus-Hush description of mixed-valency, with the added knowledge that specific orbitals contribute to different degrees in the electronic coupling between two redox centers.

Steric and electronic control of an ultrafast isomerization.

Synthetic control of the influence of steric and electronic factors on the ultrafast (picosecond) isomerization of penta-coordinate ruthenium dithietene complexes (Ru((CF3)2C2S2)(CO)(L)2, where L = a monodentate phosphine ligand) is reported. Seven new ruthenium dithietene complexes were prepared and characterized by single crystal X-ray diffraction. The complexes are all square pyramidal and differ only in the axial vs. equatorial coordination of the carbonyl ligand. Fourier Transform Infrared (FTIR) spectroscopy was used to study the ν(CO) bandshapes of the complexes in solution, and these reveal rapid exchange between two or three isomers of each complex. Isomerization is proposed to follow a Berry psuedorotation-like mechanism where a metastable, trigonal bipyramidal (TBP) intermediate is observed spectroscopically. Electronic tuning of the phosphine ligands L = PPh3, P((p-Me)Ph)3, ((p-Cl)Ph)3, at constant cone angle is found to have little effect on the kinetics or thermodynamic stabilities of the axial, equatorial and TBP isomers of the differently substituted complexes. Steric tuning of the phosphine ligands over a range of phosphine cone angles (135 < θ < 165°) has a profound impact on the isomerization process, and in the limit of greatest steric bulk, the axial isomer is not observable. Temperature dependence of the FTIR spectra was used to obtain the relative thermodynamic stabilities of the different isomers of each of the seven ruthenium dithietene complexes. This study details how ligand steric effects can be used to direct the solution state dynamics on the picosecond time scale of discrete isomers energetically separated by <2.2 kcal mol-1. This work provides the most detailed description to date of ultrafast isomerization in the ground states of transition metal complexes.

Thermodynamic targeting of electrocatalytic CO2 reduction: advantages, limitations, and insights for catalyst design.

Herein is reported the electrocatalytic reduction of CO2 with the complex [Ni(bis-NHC)(dmpe)]2+ (1) (bis-NHC = 1,l':3,3'-bis(1,3-propanediyl)dibenzimidazolin-2,2'-diylidene; dmpe = 1,2-bis(dimethylphosphino)ethane). The hydricity of 1 was previously benchmarked to be , equating to a driving force of a minimum of ∼3.4 kcal mol-1 for hydride transfer to CO2. While hydride transfer to CO2 is thermodynamically favorable, electrocatalytic and infrared spectroelectrochemical (IR-SEC) experiments reveal that hydride transfer is blocked by direct reactivity with CO2 in the reduced, Ni(0) state of the catalyst, yielding CO via reductive disproportionation (2CO2 + 2e- = CO + CO32-) and concomitant catalyst degradation. Although thermodynamic scaling relationships provide guidance in catalyst targeting, the findings herein illustrate the fundamental kinetic challenges in balancing substrate reactivity and selectivity in the design of CO2 reduction electrocatalysts. Advantages and limitations of this scaling relationship as well as approaches by which divergence from it may be achieved are discussed, which provides insight on important parameters for future catalyst design.

Re(tBu-bpy)(CO)3Cl Supported on Multi-Walled Carbon Nanotubes Selectively Reduces CO2 in Water.

The selective electrochemical reduction of CO2 to CO in water by a Re(tBu-bpy)(CO)3Cl catalyst incorporated into multi-walled carbon nanotubes (MWCNT) was investigated. Current densities of ∼4 mA/cm2 and selectivities (FECO) of 99% were achieved at -0.56 V vs RHE in CO2-saturated aqueous KHCO3 solutions. The Re(tBu-bpy)(CO)3Cl catalyst has been widely studied as a homogeneous catalyst in organic solvents. Supporting Re(tBu-bpy)(CO)3Cl on MWCNTs increases current densities, decreases overpotential, retains selectivity for reduction of CO2 to CO, and allows operation in water at pH = 7.3 compared to the molecular catalyst in acetonitrile solution. The Re/MWCNT electrocatalysts achieve TON > 5600 and TOF > 1.6 s-1. This electrocatalyst material is efficient, robust, simple to prepare, and scalable.

Improving Photocatalysis for the Reduction of CO2 through Non-covalent Supramolecular Assembly.

We report the enhancement of photocatalytic performance by introduction of hydrogen-bonding interactions to a Re bipyridine catalyst and Ru photosensitizer system (ReDAC/RuDAC) by the addition of amide substituents, with carbon monoxide (CO) and carbonate/bicarbonate as products. This system demonstrates a more-than-3-fold increase in turnover number (TONCO = 100 ± 4) and quantum yield (ΦCO = 23.3 ± 0.8%) for CO formation compared to the control system using unsubstituted Ru photosensitizer (RuBPY) and ReDAC (TONCO = 28 ± 4 and ΦCO = 7 ± 1%) in acetonitrile (MeCN) with 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as sacrificial reductant. In dimethylformamide (DMF), a solvent that disrupts hydrogen bonds, the ReDAC/RuDAC system showed a decrease in catalytic performance while the control system exhibited an increase, indicating the role of hydrogen bonding in enhancing the photocatalysis for CO2 reduction through supramolecular assembly. The similar properties of RuDAC and RuBPY demonstrated in lifetime measurements, spectroscopic analysis, and electrochemical and spectroelectrochemical studies revealed that the enhancement in photocatalysis is due not to differences in intrinsic properties of the catalyst or photosensitizer, but to hydrogen-bonding interactions between them.

Photooxidative Generation of Dodecaborate-Based Weakly Coordinating Anions.

Redox-active proanions of the type B12(OCH2Ar)12 [Ar = C6F5 (1), 4-CF3C6H4 (2), 3,5-(CF3)2C6H3 (3)] are introduced in the context of an experimental and computational study of the visible-light-initiated polymerization of a family of styrenes. Neutral, air-stable proanions 1-3 were found to initiate styrene polymerization through single-electron oxidation under blue-light irradiation, resulting in polymers with number-average molecular weights (Mn) ranging from ∼6 to 100 kDa. Shorter polymer products were observed in the majority of experiments, except in the case of monomers containing 4-X (X = F, Cl, Br) substituents on the styrene monomer when polymerized in the presence of 1 in CH2Cl2. Only under these specific conditions are longer polymers (>100 kDa) observed, strongly supporting the formulation that reaction conditions significantly modulate the degree of ion pairing between the dodecaborate anion and cationic chain end. This also suggests that 1-3 behave as weakly coordinating anions (WCA) upon one-electron reduction because no incorporation of the cluster-based photoinitiators is observed in the polymeric products analyzed. Overall, this work is a conceptual realization of a single reagent that can serve as a strong photooxidant, subsequently forming a WCA.

Heterogenized Molecular Catalysts: Vibrational Sum-Frequency Spectroscopic, Electrochemical, and Theoretical Investigations.

Rhenium and manganese bipyridyl tricarbonyl complexes have attracted intense interest for their promising applications in photocatalytic and electrocatalytic CO2 reduction in both homogeneous and heterogenized systems. To date, there have been extensive studies on immobilizing Re catalysts on solid surfaces for higher catalytic efficiency, reduced catalyst loading, and convenient product separation. However, in order for the heterogenized molecular catalysts to achieve the combination of the best aspects of homogeneous and heterogeneous catalysts, it is essential to understand the fundamental physicochemical properties of such heterogeneous systems, such as surface-bound structures of Re/Mn catalysts, substrate-adsorbate interactions, and photoinduced or electric-field-induced effects on Re/Mn catalysts. For example, the surface may act to (un)block substrates, (un)trap charges, (de)stabilize particular intermediates (and thus affect scaling relations), and shift potentials in different directions, just as protein environments do. The close collaboration between the Lian, Batista, and Kubiak groups has resulted in an integrated approach to investigate how the semiconductor or metal surface affects the properties of the attached catalyst. Synthetic strategies to achieve stable and controlled attachment of Re/Mn molecular catalysts have been developed. Steady-state, time-resolved, and electrochemical vibrational sum-frequency generation (SFG) spectroscopic studies have provided insight into the effects of interfacial structures, ultrafast vibrational energy relaxation, and electric field on the Re/Mn catalysts, respectively. Various computational methods utilizing density functional theory (DFT) have been developed and applied to determine the molecular orientation by direct comparison to spectroscopy, unravel vibrational energy relaxation mechanisms, and quantify the interfacial electric field strength of the Re/Mn catalyst systems. This Account starts with a discussion of the recent progress in determining the surface-bound structures of Re catalysts on semiconductor and Au surfaces by a combined vibrational SFG and DFT study. The effects of crystal facet, length of anchoring ligands, and doping of the semiconductor on the bound structures of Re catalysts and of the substrate itself are discussed. This is followed by a summary of the progress in understanding the vibrational relaxation (VR) dynamics of Re catalysts covalently adsorbed on semiconductor and metal surfaces. The VR processes of Re catalysts on TiO2 films and TiO2 single crystals and a Re catalyst tethered on Au, particularly the role of electron-hole pair (EHP)-induced coupling on the VR of the Re catalyst bound on Au, are discussed. The Account also summarizes recent studies in quantifying the electric field strength experienced by the catalytically active site of the Re/Mn catalyst bound on a Au electrode based on a combined electrochemical SFG and DFT study of the Stark tuning of the CO stretching modes of these catalysts. Finally, future research directions on surface-immobilized molecular catalyst systems are discussed.