RESUMEN
With a view to developing multimetallic molecular catalysts that mimic the oxygen-evolving catalyst (OEC) in Nature's photosystem II, the synthesis of various dicubanoid manganese clusters is described and their catalytic activity investigated for water oxidation in basic, aqueous solution. Pyridinemethanol-based ligands are known to support polynuclear and cubanoid structures in manganese coordination chemistry. The chelators 2,6-pyridinedimethanol (H2 L1 ) and 6-methyl-2-pyridinemethanol (HL2 ) were chosen to yield polynuclear manganese complexes; namely, the tetranuclear defective dicubanes [MnII 2 MnIII 2 (HL1 )4 (OAc)4 (OMe)2 ] and [MnII 2 MnIII 2 (HL1 )6 (OAc)2 ] (OAc)2 â 2 H2 O, as well as the octanuclear-dicubanoid [MnII 6 MnIII 2 (L2 )4 (O)2 (OAc)10 (HOMe/OH2 )2 ]â 3MeOHâ MeCN. In freshly prepared solutions, polynuclear species were detected by electrospray ionization mass spectrometry, whereas X-band electron paramagnetic resonance studies in dilute, liquid solution suggested the presence of divalent mononuclear Mn species with g values of 2. However, the magnetochemical investigation of the complexes' solutions by the Evans technique confirmed a haphazard combination of manganese coordination complexes, from mononuclear to polynuclear species. Subsequently, the newly synthesized and characterized manganese molecular complexes were employed as precursors to prepare electrode-deposited films in a buffer-free solution to evaluate and compare their stability and catalytic activity for water oxidation electrocatalysis.
RESUMEN
A novel oxygen evolution reaction (OER) catalyst (3 D S235-P steel) based on a steel S235 substrate was successfully prepared by facile one-step surface modification. The standard carbon-manganese steel was phosphorized superficially, which led to the formation of a unique 3 D interconnected nanoporous surface with a high specific area that facilitated the electrocatalytically initiated oxygen evolution reaction. The prepared 3 D S235-P steel exhibited enhanced electrocatalytic OER activities in the alkaline regime, as confirmed by a low overpotential (326â mV at a 10â mA cm-2 ) and a small Tafel slope of 68.7â mV dec-1 . Moreover, the catalyst was found to be stable under long-term usage conditions, functioning as an oxygen-evolving electrode at pHâ 13, as evidenced by the sufficient charge-to-oxygen conversion rate (faradaic efficiency: 82.11 and 88.34 % at 10 and 5â mA cm-2 , respectively). In addition, it turned out that the chosen surface modification delivered steel S235 as an OER electrocatalyst that was stable under neutral pH conditions. Our investigation revealed that the high catalytic activities likely stemmed from the generated Fe/(Mn) hydroxide/oxohydroxides generated during the OER process. Phosphorization treatment therefore not only is an efficient way to optimize the electrocatalytic performance of standard carbon-manganese steel but also enables for the development of low-costing and abundant steels in the field of energy conversion.
RESUMEN
We present a comparative study of the morphology and structural as well as magnetic properties of crystalline Fe3O4/NiO bilayers grown on both MgO(001) and SrTiO3(001) substrates by reactive molecular beam epitaxy. These structures were investigated by means of X-ray photoelectron spectroscopy, low-energy electron diffraction, X-ray reflectivity and diffraction, as well as vibrating sample magnetometry. While the lattice mismatch of NiO grown on MgO(001) was only 0.8%, it was exposed to a lateral lattice mismatch of −6.9% if grown on SrTiO3. In the case of Fe3O4, the misfit strain on MgO(001) and SrTiO3(001) amounted to 0.3% and −7.5%, respectively. To clarify the relaxation process of the bilayer system, the film thicknesses of the magnetite and nickel oxide films were varied between 5 and 20 nm. While NiO films were well ordered on both substrates, Fe3O4 films grown on NiO/SrTiO3 exhibited a higher surface roughness as well as lower structural ordering compared to films grown on NiO/MgO. Further, NiO films grew pseudomorphic in the investigated thickness range on MgO substrates without any indication of relaxation, whereas on SrTiO3 the NiO films showed strong strain relaxation. Fe3O4 films also exhibited strong relaxation, even for films of 5 nm thickness on both NiO/MgO and NiO/SrTiO3. The magnetite layers on both substrates showed a fourfold magnetic in-plane anisotropy with magnetic easy axes pointing in 100 directions. The coercive field was strongly enhanced for magnetite grown on NiO/SrTiO3 due to the higher density of structural defects, compared to magnetite grown on NiO/MgO.
RESUMEN
A facile method for the electrodeposition of amorphous nickel oxyhydroxide is described and discussed in which well-defined nickel complexes with pyridinedimethanol ligands are employed as single-source molecular precursors. No buffering agent is required to assist the anodic deposition process. The deposited nickel oxyhydroxide shows high robustness and efficiency for electrocatalytic water oxidation.
RESUMEN
The properties of ß-NaEuF4/NaGdF4 core-shell nanocrystals have been thoroughly investigated. Nanoparticles with narrow size distribution and an overall diameter of â¼22 nm have been produced with either small ß-NaEuF4 cores (â¼3 nm diameter) or large ß-NaEuF4 cores (â¼18 nm diameter). The structural properties and core-shell formation are investigated by X-ray diffraction, transmission electron microscopy and electron paramagnetic resonance, respectively. Optical luminescence measurements and X-ray photoelectron spectroscopy are employed to gain information about the optical emission bands and valence states of the rare earth constituents. Magnetic characterization is performed by SQUID and X-ray magnetic circular dichroism measurements at the rare earth M(4,5) edges. The characterization of the core-shell nanoparticles by means of these complementary techniques demonstrates that partial intermixing of core and shell materials takes place, and a significant fraction of europium is present in the divalent state which has significant influence on the magnetic properties. Hence, we obtained a combination of red emitting Eu(3+) ions and paramagnetic Gd(3+) ions, which may be highly valuable for potential future applications.
RESUMEN
Monolayers and submonolayers of [MnIII6CrIII]3+ single-molecule magnets (SMMs) adsorbed on highly oriented pyrolytic graphite (HOPG) using the droplet technique characterized by non-contact atomic force microscopy (nc-AFM) as well as by Kelvin probe force microscopy (KPFM) show island-like structures with heights resembling the height of the molecule. Furthermore, islands were found which revealed ordered 1D as well as 2D structures with periods close to the width of the SMMs. Along this, islands which show half the heights of intact SMMs were observed which are evidences for a decomposing process of the molecules during the preparation. Finally, models for the structure of the ordered SMM adsorbates are proposed to explain the observations.
RESUMEN
Silicon as the negative electrode material of lithium ion batteries has a very large capacity, the exploitation of which is impeded by the volume changes taking place upon electrochemical cycling. A Si electrode displaying a controlled porosity could circumvent the difficulty. In this perspective, we present a preparative method that yields ordered arrays of electrochemically competent silicon nanotubes. The method is based on the atomic layer deposition of silicon dioxide onto the pore walls of an anodic alumina template, followed by a thermal reduction with lithium vapor. This thermal reduction is quantitative, homogeneous over macroscopic samples, and it yields amorphous silicon and lithium oxide, at the exclusion of any lithium silicides. The reaction is characterized by spectroscopic ellipsometry for thin silica films, and by nuclear magnetic resonance and X-ray photoelectron spectroscopy for nanoporous samples. After removal of the lithium oxide byproduct, the silicon nanotubes can be contacted electrically. In a lithium ion electrolyte, they then display the electrochemical waves also observed for other bulk or nanostructured silicon systems. The method established here paves the way for systematic investigations of how the electrochemical properties (capacity, charge/discharge rates, cyclability) of nanoporous silicon negative lithium ion battery electrode materials depend on the geometry.
RESUMEN
Giant Keplerate-type molecules with a {Mo72Fe30} core show a number of very interesting properties, making them particularly promising for various applications. So far, only limited data on the electronic structure of these molecules from X-ray spectra and electronic structure calculations have been available. Here we present a combined electronic and magnetic structure study of three Keplerate-type nanospheres--two with a {Mo72Fe30} core and one with a {W72Fe30} core by means of X-ray absorption spectroscopy, X-ray magnetic circular dichroism (XMCD), SQUID magnetometry, and complementary theoretical approaches. Furthermore, we present detailed studies of the Fe(3+)-to-Fe(2+) photoreduction process, which is induced under soft X-ray radiation in these molecules. We observe that the photoreduction rate greatly depends on the ligand structure surrounding the Fe ions, with negatively charged ligands leading to a dramatically reduced photoreduction rate. This opens the possibility of tailoring such polyoxometalates by X-ray spectroscopic studies and also for potential applications in the field of X-ray induced photochemistry.
RESUMEN
The most important limitation for a significant increase of the areal storage density in magnetic recording is the superparamagnetic effect. Below a critical grain size of the used CoCrPt exchange-decoupled granular films the information cannot be stored for a reasonable time (typically ten years) due to thermal fluctuations arbitrary flipping of the magnetization direction. An alternative approach that may provide higher storage densities is the use of so-called percolated media, in which defect structures are imprinted in an exchange-coupled magnetic film. Such percolated magnetic films are investigated in the present work. We employ preparation routes that are based on (i) self-assembly of Au nanoparticles and (ii) homogeneous size-reduction of self-assembled polystyrene particles. On such non-close-packed nanostructures thin Fe films or Co/Pt multilayers are grown with in-plane and out-of-plane easy axis of magnetization. The impact of the particles on the magnetic switching behavior is measured by both integral magnetometry and magnetic microscopy techniques. We observe enhanced coercive fields while the switching field distribution is broadened compared to thin-film reference samples. It appears possible to tailor the magnetic domain sizes down to the width of an unperturbed domain wall in a continuous film, and moreover, we observe pinning and nucleation at or close to the imprinted defect structures.
RESUMEN
Molecular magnets incorporate transition-metal ions with organic groups providing a bridge to mediate magnetic exchange interactions between the ions. Among them are star-shaped molecules in which antiferromagnetic couplings between the central and peripheral atoms are predominantly present. Those configurations lead to an appreciable spin moment in the nonfrustrated ground state. In spite of its topologically simple magnetic structure, the [Cr(III)Mn(II)(3) (PyA)(6)Cl(3)] (CrMn(3)) molecule, in which PyA represents the monoanion of syn-pyridine-2-aldoxime, exhibits nontrivial magnetic properties, which emerge from the combined action of single-ion anisotropy and frustration. In the present work, we elucidate the underlying electronic and magnetic properties of the heteronuclear, spin-frustrated CrMn(3) molecule by applying X-ray magnetic circular dichroism (XMCD), as well as magnetization measurements in high magnetic fields, density functional theory, and ligand-field multiplet calculations. Quantum-model calculations based on a Heisenberg Hamiltonian augmented with local anisotropic terms enable us not only to improve the accuracy of the exchange interactions but also to determine the dominant local anisotropies. A discussion of the various spin Hamiltonian parameters not only leads to a validation of our element selective transition metal L edge XMCD spin moments at a magnetic field of 5 T and a temperature of 5 K but also allows us to monitor an interesting effect of anisotropy and frustration of the manganese and chromium ions.
Asunto(s)
Cromo/química , Electrones , Magnetismo , Manganeso/química , Modelos Moleculares , Teoría Cuántica , Anisotropía , Dicroismo Circular , Transporte de Electrón , Conformación Molecular , Rayos XRESUMEN
We report a comprehensive study of the electronic and magnetic properties of a star-shaped molecule comprising a MnII4O6 core. One feature of this compound is weak magnetic coupling constants compared to other similar polyoxo compounds. This leads to complicated low-lying magnetic states in which the ground state is not well separated from the upper-lying states, yielding a high-spin molecule with a giant magnetic moment of up to 20 microB/formula unit. We apply X-ray diffraction and magnetometry as well as other X-ray spectroscopic techniques, namely, X-ray photoelectron spectroscopy, X-ray magnetic circular dichroism, and X-ray emission spectroscopy. We compare our experimental results with ab initio electronic band structure calculations as well as the localized electronic structure around the Mn2+ ions with charge-transfer multiplet calculations.