Galacto-oligosaccharides as infant prebiotics: production, application, bioactive activities and future perspectives.

Galacto-oligosaccharides (GOS) are non-digestible oligosaccharides characterized by a mix of structures that vary in their degree of polymerization (DP) and glycosidic linkage between the galactose moieties or between galactose and glucose. They have enjoyed extensive scientific scrutiny, and their health-promoting effects are supported by a large number of scientific and clinical studies. A variety of GOS-associated health-promoting effects have been reported, such as growth promotion of beneficial bacteria, in particular bifidobacteria and lactobacilli, inhibition of pathogen adhesion and improvement of gut barrier function. GOS have attracted significant interest from food industries for their versatility as a bioactive ingredient and in particular as a functional component of infant formulations. These oligosaccharides are produced in a kinetically-controlled reaction involving lactose transgalactosylation, being catalyzed by particular ß-galactosidases of bacterial or fungal origin. Despite the well-established technology applied for GOS production, this process may still meet with technological challenges when employed at an industrial scale. The current review will cover relevant scientific literature on the beneficial physiological properties of GOS as a prebiotic for the infant gut microbiota, details of GOS structures, the associated reaction mechanism of ß-galactosidase, and its (large-scale) production.

Bifidobacterial ß-Galactosidase-Mediated Production of Galacto-Oligosaccharides: Structural and Preliminary Functional Assessments.

In the current study the ability of four previously characterized bifidobacterial ß-galactosidases (designated here as BgaA, BgaC, BgaD, and BgaE) to produce galacto-oligosaccharides (GOS) was optimized. Of these enzymes, BgaA and BgaE were found to be promising candidates for GOS production (and the corresponding GOS mixtures were called GOS-A and GOS-E, respectively) with a GOS concentration of 19.0 and 40.3% (of the initial lactose), respectively. GOS-A and GOS-E were partially purified and structurally characterized. NMR analysis revealed that the predominant (non-lactose) disaccharide was allo-lactose in both purified GOS preparations. The predominant trisaccharide in GOS-A and GOS-E was shown to be 3'-galactosyllactose, with lower levels of 6'-galactosyllactose and 4'-galactosyllactose. These three oligosaccharides have also been reported to occur in human milk. Purified GOS-A and GOS-E were shown to be able to support bifidobacterial growth similar to a commercially available GOS. In addition, GOS-E and the commercially available GOS were shown to be capable of reducing Escherichia coli adhesion to a C2BBe1 cell line. Both in vitro bifidogenic activity and reduced E. coli adhesion support the prebiotic potential of GOS-E and GOS-A.

Infant-Associated Bifidobacterial ß-Galactosidases and Their Ability to Synthesize Galacto-Oligosaccharides.

Galacto-oligosaccharides (GOS) represent non-digestible glycans that are commercially produced by transgalactosylation of lactose, and that are widely used as functional food ingredients in prebiotic formulations, in particular in infant nutrition. GOS consumption has been reported to enhance growth of specific bacteria in the gut, in particular bifidobacteria, thereby supporting a balanced gut microbiota. In a previous study, we assessed the hydrolytic activity and substrate specificity of seventeen predicted ß-galactosidases encoded by various species and strains of infant-associated bifidobacteria. In the current study, we further characterized seven out of these seventeen bifidobacterial ß-galactosidases in terms of their kinetics, enzyme stability and oligomeric state. Accordingly, we established whether these ß-galactosidases are capable of synthesizing GOS via enzymatic transgalactosylation employing lactose as the feed substrate. Our findings show that the seven selected enzymes all possess such transgalactosylation activity, though they appear to differ in their efficiency by which they perform this reaction. From chromatography analysis, it seems that these enzymes generate two distinct GOS mixtures: GOS with a relatively short or long degree of polymerization profile. These findings may be the stepping stone for further studies aimed at synthesizing new GOS variants with novel and/or enhanced prebiotic activities and potential for industrial applications.

Comparative structural characterization of 7 commercial galacto-oligosaccharide (GOS) products.

Many ß-galactosidase enzymes convert lactose into a mixture of galacto-oligosaccharides (GOS) when incubated under the right conditions. Recently, the composition of commercial Vivinal GOS produced by Bacillus circulans ß-galactosidase was studied in much detail in another study by van Leeuwen et al. As a spin-off of this study, we used the developed analytical strategy for the evaluation of 6 anonymous commercial GOS products, in comparison with Vivinal GOS. These GOS products were first subjected to HPLC-SEC, calibrated HPAEC-PAD profiling (glucose units in relation to a malto-oligosaccharide ladder), and 1D (1)H NMR spectroscopy. For a more detailed analysis and support of the conclusions based on the initial analysis, the GOS products were separated into DP-pure subpools on Bio-Gel P-2 (MALDI-TOF-MS analysis), which were subjected to calibrated HPAEC-PAD profiling and (1)H NMR analysis. Unidentified peaks from different GOS products, not present in Vivinal GOS, were isolated for detailed structural characterization. In this way, the differences between the various GOS products in terms of DP distribution and type of glycosidic linkages were established. A total of 13 new GOS structures were characterized, adding structural-reporter-group signals and HPAEC-PAD based glucose unit G.U. values to the analytical toolbox. The newly characterized products enhance the quality of the database with GOS structures up to DP4. The combined data provide a firm basis for the rapid profiling of the GOS products of microbial ß-galactosidase enzymes.

Biochemical characterization of mutants in the active site residues of the ß-galactosidase enzyme of Bacillus circulans ATCC 31382.

The Bacillus circulans ATCC 31382 ß-galactosidase (BgaD) is a retaining-type glycosidase of glycoside hydrolase family 2 (GH2). Its commercial enzyme preparation, Biolacta N5, is used for commercial-scale production of galacto-oligosaccharides (GOS). The BgaD active site and catalytic amino acid residues have not been studied. Using bioinformatic routines we identified two putative catalytic glutamates and two highly conserved active site histidines. The site-directed mutants E447N, E532Q, and H345F, H379F had lost (almost) all catalytic activity. This confirmed their essential role in catalysis, as general acid/base catalyst (E447) and nucleophile (E532), and as transition state stabilizers (H345, H379), respectively.

(1)H NMR analysis of the lactose/ß-galactosidase-derived galacto-oligosaccharide components of Vivinal® GOS up to DP5.

Vivinal® GOS is a galacto-oligosaccharide (GOS) product, prepared from lactose by incubation with Bacillus circulans ß-galactosidase (EC 3.2.1.23). This complex mixture of saccharides with degree of polymerization (DP) between 1 and 8 is generally applied in infant nutrition. Here, a detailed structural description of the commercial product up to the DP5 level is given. First, Vivinal® GOS was subjected to DP analysis using HPLC-SEC (Rezex RSO-01 oligosaccharide Ag(+) column) and (1)H NMR analysis. Then, the product was fractionated on Bio-Gel P-2, and the obtained fractions were pooled according to DP, as indicated by MALDI-TOF-MS analysis. Finally, fractions of single DP, as well as their subfractions obtained by HPAEC-PAD on CarboPac PA-1, were analyzed by 1D/2D (1)H/(13)C NMR spectroscopy and linkage analysis. In total, over 40 structures, providing a structural coverage of over 99% of the product, have been characterized. Detailed (1)H and (13)C NMR data, as well as G.U. values (glucose units; malto-oligosaccharide ladder) on CarboPac PA-1 of all oligosaccharides are included.

Development of a (1)H NMR structural-reporter-group concept for the analysis of prebiotic galacto-oligosaccharides of the [ß-d-Galp-(1→x)]n-d-Glcp type.

Some ß-galactosidases (EC 3.2.1.23) are capable of producing mixtures of linear and branched galacto-oligosaccharides (GOS) with various types of glycosidic linkages [degree of polymerization (DP) 2-8; mainly GalnGlc] when incubated under specific conditions with lactose. These products are generally applied in infant formula. However, for most galacto-oligosaccharide products only major components (low DP) or linkage patterns have been described. To build up a library of (1)H and (13)C NMR data, a detailed NMR study on commercially available GOS di- and trisaccharides, and some larger GOS oligosaccharides was carried out. Based on the fully assigned (1)H and (13)C chemical shifts of these model compounds, a (1)H NMR structural-reporter-group concept was formulated to function as a tool in the structural analysis of single GOS components and GOS mixtures.

Identification of strong aggregating regions in soy glycinin upon enzymatic hydrolysis.

Upon hydrolysis with chymotrypsin, soy glycinin has a strong tendency to aggregate. The regions of glycinin from which the aggregating peptides originate were identified by accumulative-quantitative peptide mapping. To this end, the aggregating peptides were further hydrolyzed with trypsin to obtain peptides of which the sequence can be identified using RP-HPLC-MS/MS. This resulted in a hydrolysate in which 90% of the proteinaceous material was dissolved. The soluble fraction was analyzed using the method of accumulative-quantitative peptide mapping: fractionation using ion exchange chromatography, followed by identification of peptides by RP-HPLC-MS/MS, quantification based on the absorbance at 214 nm, and finally peptide mapping. For the peptide mapping the proportions in which each of the five glycinin subunits are present, as determined by Edman degradation, were taken into account. The results showed that mainly the basic polypeptide and a part of the acidic polypeptide, close to the location of the disulfide bridge between the basic and acidic polypeptides, are present in the aggregating peptide fraction. On the basis of the results obtained, an aggregation mechanism was proposed. The hydrophilic acidic polypeptides shield the hydrophobic basic polypeptides, and the former are preferentially degraded upon hydrolysis. This results in a net increase in hydrophobicity of the remaining material, which mainly consists of the basic polypeptide fragments. This increase in hydrophobicity is proposed to be the driving force in the aggregation of chymotrypsin-derived peptides of glycinin.

Functional region identification in proteins by accumulative-quantitative peptide mapping using RP-HPLC-MS.

A new method was developed to identify regions in proteins from which peptides are derived with specific functional properties. This method is applicable for systems in which peptides of a hydrolyzed protein possess specific functional properties, but are too large to be sequenced directly and/or the peptide mixture is too complex to purify and characterize each peptide individually. In the present work, aggregating peptides obtained by proteolytic hydrolysis of soy glycinin were used as a case study. The aggregating peptides are isolated and subsequently further degraded with trypsin to result in peptides with a mass <5000 Da to enable sequence identification using RP-HPLC-MS in combination with MS/MS. Prior to RP-HPLC the peptides are fractionated using anion and cation exchange chromatography. The fractions obtained are analyzed with RP-HPLC-MS. The peptides, with identified sequences, were quantified using the peak areas of the RP-HPLC chromatograms measured at 214 nm. Next, the peak areas were corrected for the molar extinction coefficient of the individual peptides, followed by accumulative-quantitative peptide mapping. The results show that in complex systems, based on the method described, the regions in the parental protein from which the functional peptides originate can be properly identified.

Comparison of the aggregation behavior of soy and bovine whey protein hydrolysates.

Soy-derived proteins (soy protein isolate, glycinin, and beta-conglycinin) and bovine whey-derived proteins (whey protein isolate, alpha-lactalbumin, beta-lactoglobulin) were hydrolyzed using subtilisin Carlsberg, chymotrypsin, trypsin, bromelain, and papain. The (in)solubility of the hydrolysates obtained was studied as a function of pH. At neutral pH, all soy-derived protein hydrolysates, particularly those from glycinin, obtained by hydrolysis with subtilisin Carlsberg, chymotrypsin, bromelain, and papain showed a stronger aggregation compared to the non-hydrolyzed ones. This increase in aggregation was not observed upon hydrolysis by trypsin. None of the whey-derived protein hydrolysates exhibited an increase in aggregation at neutral pH. The high abundance of theoretical cleavage sites in the hydrophobic regions of glycinin probably explains the stronger exposure of hydrophobic groups than for the other proteins, which is suggested to be the driving force in the aggregate formation.

Prediction of molar extinction coefficients of proteins and peptides using UV absorption of the constituent amino acids at 214 nm to enable quantitative reverse phase high-performance liquid chromatography-mass spectrometry analysis.

The molar extinction coefficients of 20 amino acids and the peptide bond were measured at 214 nm in the presence of acetonitrile and formic acid to enable quantitative comparison of peptides eluting from reversed-phase high-performance liquid chromatography, once identified with mass spectrometry (RP-HPLC-MS). The peptide bond has a molar extinction coefficient of 923 M(-1) cm(-1). Tryptophan has a molar extinction coefficient that is approximately 30 times higher than that of the peptide bond, whereas the molar extinction coefficients of phenylalanine, tyrosine, and histidine are approximately six times higher than that of the peptide bond. Proline, as an individual amino acid, has a negligible molar extinction coefficient. However, when present in the peptide chain (except at the N terminus), it absorbs approximately three times more than a peptide bond. Methionine has a similar molar extinction coefficient as the peptide bond, while all other amino acids have much lower molar extinction coefficients. The predictability of the molar extinction coefficients of proteins and peptides, calculated by the amino acid composition and the number of peptide bonds present, was validated using several proteins and peptides. Most of the measured and calculated molar extinction coefficients were in good agreement, which shows that it is possible to compare peptides analyzed by RP-HPLC-MS in a quantitative way. This method enables a quantitative analysis of all peptides present in hydrolysates once identified with RP-HPLC-MS.

Enzymatic hydrolysis as a means of expanding the cold gelation conditions of soy proteins.

Acid-induced cold gelation of soy protein hydrolysates was studied. Hydrolysates with degrees of hydrolysis (DH) of up to 10% were prepared by using subtilisin Carlsberg. The enzyme was inhibited to uncouple the hydrolysis from the subsequent gelation; the latter was induced by the addition of glucono-delta-lactone. Visual observations, confocal scanning laser microscopy images, and the elasticity modulus showed that hydrolysates gelled at higher pH values with increasing DH. The nonhydrolyzed soy protein isolate gelled at pH approximately 6.0, whereas a DH = 5% hydrolysate gelled at pH approximately 7.6. Gels made from hydrolysates had a softer texture when manually disrupted and showed syneresis below a pH of 5-5.5. Monitoring of gelation by measuring the development of the storage modulus could be replaced by measuring the pH onset of aggregate formation (pH(Aggr-onset)) using turbidity measurements. The rate of acidification was observed to also influence this pH(Aggr-onset). Changes in ionic strength (0.03, 0.2, and 0.5 M) had only a minor influence on the pH(Aggr-onset), indicating that the aggregation is not simply a balance between repulsive electrostatic and attractive hydrophobic interactions, but is much more complex.