Development of a FRET aptasensor based on MoS2-doped Zn-MOF as luminophore for selective detection of cadmium in aqueous solutions.

A robust "on-off" fluorescent aptasensor was developed using nanohybrids of molybdenum sulfide (MoS2) quantum dot (QD)-doped zinc metal-organic frameworks (Zn-MOF) for selective and sensitive detection of cadmium ions (Cd2+) in water. This nanohybrid (MoS2@Zn-MOF), synthesized via "bottle around the ship" methodology, exhibited a high-intensity fluorescence emission centered at 430 nm (λEm) (blue) on excitation at 320 nm (λEx). Further, the conjugation of this fluorophore to phosphate-modified cadmium aptamer (Cd-2-2) was achieved through carbodiimide reaction. The hybridization of prepared sensing probe (MoS2@Zn-MOF/Cd-2-2 aptamer) was done with dabcyl-conjugated complementary DNA (cDNA), acting as energy donor-acceptor pair in the fluorescence resonance energy transfer (FRET) system. This hybridization causes the fluorescence quenching of the nanohybrid. In the presence of Cd2+, the aptamer from the fabricated nano-biosensing probe binds to these ions, resulting in release of dabcyl-cDNA oligomer. This release of dabcyl-cDNA oligomer from the sensing probes restores the fluorescence of the nanohybrid. Under optimized conditions (sensing probe/dabcyl-cDNA ratio 1/7, pH 7.4, and temp 28 °C), the sensing probe showed a fast response time of 1 min. The fluorescence intensity of the nanohybrid can be utilized to determine the concentration of Cd2+. The proposed aptasensor achieved highly sensitive detection of Cd2+ with a limit of detection (LOD) of 0.24 ppb over the range of 1 × 10-9 to 1 × 10-4 M along with minimal effects of interferences (e.g., Hg2+, Pb2+, and Zn2+) and good reproducibility. The designed aptasensor based on MoS2@Zn-MOF nanofluorophore offers a highly sensitive and selective approach for rapid screening of metal ions in aqueous environments.

TWISP: A Transgenic Worm for Interrogating Signal Propagation in C. elegans.

Genetically encoded optical indicators and actuators of neural activity allow for all-optical investigations of signaling in the nervous system. But commonly used indicators, actuators and expression strategies are poorly suited for systematic measurements of signal propagation at brain scale and cellular resolution. Large scale measurements of the brain require indicators and actuators with compatible excitation spectra to avoid optical crosstalk. They must be highly expressed in every neuron but at the same time avoid lethality and permit the animal to reach adulthood. Their expression must also be compatible with additional fluorescent labels to locate and identify neurons, such as those in the NeuroPAL cell identification system. We present TWISP, a Transgenic Worm for Interrogating Signal Propagation, that addresses these needs and enables optical measurements of evoked calcium activity at brain scale and cellular resolution in the nervous system of the nematode Caenorhabditis elegans. We express in every neuron a non-conventional optical actuator, the gustatory receptor homolog GUR-3 + PRDX-2 under the control of a drug-inducible system QF + hGR, and calcium indicator GCAMP6 s, in a background with additional fluorophores of the NeuroPAL cell ID system. We show that this combination, but not others tested, avoids optical-crosstalk, creates strong expression in the adult, and generates stable transgenic lines for systematic measurements of signal propagation in the worm brain.

Development and Validation of Fast and Sensitive RP-HPLC Stability-Indicating Method for Quantification of Piroxicam in Bulk Drug.

A simple, rapid, sensitive, and cost-effective green solvent-assisted reverse-phase high-performance liquid chromatographic technique, coupled with a photodiode array detector, was developed and validated for the estimation of piroxicam (PRXM). The chromatographic separation was achieved by using a C-18 (250 × 4.6) mm, 5-µm stationary phase and a mobile phase consisting of methanol and 0.1% ortho-phosphoric acid in water in a ratio of (80:20) v/v at a flow rate of 1 ml/min. The detection was carried out at a wavelength of 254 nm with a constant injection volume of 10 µL throughout the analysis. The calibration curve was observed to be linear over the optimum concentration range of 50-300 µg mL-1, with an R2 value of 0.9995. The developed method was validated as per the International Council for Harmonisation (ICH) Q2 (R1) guideline. Various parameters like selectivity/specificity, accuracy/recovery, linearity, precision, detection limit, quantitation limit, robustness and stability of analyte in solution were performed for the method validation. The PRXM was evaluated under stressed conditions, including acidic, basic, oxidative, thermal and photolytic, as per ICH Q1 (R2) guidelines. Significant degradation was observed in acidic and basic degradation conditions. Conversely, the drug substance showed stability when exposed to oxidative, photolytic and thermal degradation conditions.

Synthesized Gold Nanoparticles with Moringa Oleifera leaf Extract Induce Mitotic Arrest (G2/M phase) and Apoptosis in Dalton's Lymphoma Cells.

The therapeutic potential of chemically synthesized AuNPs has been demonstrated in various types of cancer. However, gold nanoparticles (AuNPs) synthesized using typical chemical methods have concerns regarding their environmental safety and adverse impact on human well-being. To overcome this issue, we used an environmentally friendly approach in which gold nanoparticles were synthesized using Moringa oleifera leaf extract (MLE). The present research was mainly focused on the biosynthesis and characterization of gold nanoparticles (AuNPs) using Moringa oleifera leaf extract (MLE-AuNPs) and explore its anticancer potential against Dalton's Lymphoma (DL) cells. Characterization of the MLE-AuNPs was conducted using UV-Vis Spectroscopy to confirm the reduction process, FTIR analysis to ascertain the presence of functional groups, and XRD analysis to confirm the crystallinity. SEM and TEM images were used to examine size and morphology. After characterization, MLE-AuNPs were evaluated for their cytotoxic effects on Dalton's lymphoma cells, and the results showed an IC50 value of 75 ± 2.31 µg/mL; however, there was no discernible cytotoxicity towards normal murine thymocytes. Furthermore, flow cytometric analysis revealed G2/M phase cell cycle arrest mediated by the downregulation of cyclin B1 and Cdc2 and upregulation of p21. Additionally, apoptosis induction was evidenced by Annexin V Staining, accompanied by modulation of apoptosis-related genes including decreased Bcl-2 expression and increased expression of Bax, Cyt-c, and Caspase-3 at both the mRNA and protein levels. Collectively, our findings underscore the promising anti-cancer properties of MLE-AuNPs, advocating their potential as a novel therapeutic avenue for Dalton's lymphoma.

Evaluation of the non-endoscopic and endoscopic-assisted platysma flap - A randomized control trial.

Background and Aim: As oral submucous fibrosis (OSMF) is a chronic progressive disorder, the treatment is based on the severity of the disease. Surgical treatment is the only choice for grade III and grade IV OSMF cases because the patient can neither clean his/her mouth nor properly chew. The resulting soft tissue defect requires resurfacing with various well-vascularized tissues such as extraoral flaps, intraoral flaps, microvascular flaps, and allografts that have been used. Reconstruction of the resultant defects proved to be challenging. Till date, none of the flaps has been proven to be effective and is universally accepted for the treatment of OSMF because of various drawbacks of the available techniques. This study was conducted to know whether an endoscopic-assisted platysma flap is associated with better outcomes in terms of ease of operation and postoperative function than the conventional approach. Materials and Methods: This study included 40 patients of grade III and grade IV OSMF reporting to the outpatient department of oral and maxillofacial surgery in a tertiary center of North India. These patients were divided randomly into two groups. Group I and Group II had 20 patients each, undergoing endoscopic-assisted platysma flap and non-endoscopic-assisted platysma flap for reconstruction after resection of OSMF bands, respectively. Data were analyzed for the mouth opening, operating time, flap viability, congestion of neck and oral cavity, signs of inflammation, neurologic assessment, and measurement of the drain. Results: The results showed significant increase in mouth opening from the preoperative value to the values immediately after surgery and at 24 h, 1 week, 15 days, 1 month, 3 months, and 6 months after surgery in both the study groups. Reduced bleeding incidence was found in group I compared to group II, with better postoperative outcomes noted during follow-up. But the mean intraoperative time of the subjects in group I was 130.80 ± 5.5.908 min and in group II was 105.74 ± 2. 491 min. Increased time taken in group I may be due to the long learning curve. Conclusion: The present study concluded that the Endoscope-assisted technique has a key role during supra and subplatysmal dissection to allow for better accessibility, handling, and visibility of the flap and its orientation in relation to the underlying structures to avoid postoperative complications and to overcome the drawback of platysma myocutaneous flap in reconstruction of OSMF defects.

Agriculture models for restoring degraded land to enhance CO2 biosequestration and carbon credits in the Vindhyan region of India.

The study's objective was to evaluate the status of converted degraded land into productive agricultural models by improving the physicochemical properties of the soil, soil organic matter (SOM), soil organic carbon (SOC) fractions (active and passive), and microbial biomass carbon (MBC), while also generating carbon (C) credit for additional farmers' income. Six models were analyzed, namely: (1) Arjun forest-based agroecosystems (AFBAE); (2) Lemon grass-based agroecosystems (LGBAE); (3) Legume-cereal-moong-based agroecosystems (LCMBAE); (4) Bael-black mustard-based agroecosystems (BMBAE); (5) Guava-wheat-based agroecosystems (GWBAE), and (6) Custard apple -lentil -based agroecosystems (CALBAE). These models were replicated three times in a randomized block design (RBD). Soil samples were collected from the study area at two depths (0-0.30 and 0.30-0.60 m). At a 0-0.30 m depth, the highest bulk density (ρb) of 1.50 Mg m-3 was observed in LCMBAE, while the lowest ρb of 1.43 Mg m-3 was recorded in BMBAE. The soil organic carbon (SOC) and SOC stock values exhibited a range of 4.2-7.7 g kg-1 and 19.0-33.4 Mg ha-1, respectively. In the AFBAE, the highest levels of 163.1 % MBC were found over LCMBAE. At a 0-0.30 m depth, the recalcitrant index (RI) and lability index (LI) ranged from 0.35-0.46 to 1.97-2.11, respectively. Additionally, the AFBAE exhibited the highest total biomass accumulation (39.23 Mg ha-1), carbon dioxide (CO2) biosequestration (287.9 Mg ha-1), and the total social cost of CO2 at US$ 277 ha-1. Furthermore, in the AFBAE, there was a 198.1 % increase in total C credit (US$ 161 ha-1) compared to LCMBAE (US$ 54 ha-1). However, at 0.30-0.60 m depths, GWBAE and CALBAE were statistically equivalent (p ≤ 0.05) in total C stocks. Principal component analysis (PCA) reveals that component-1 accounts for 77.4 % of the variability, while component-2 contributes 18.6 %. This article aimed to convert the degraded land into a sustainable agricultural module by increasing SOC and CO2 biosequestration and producing more C-credit, or climate currency, on underutilized land.

Ab-initiotransport model to study the thermoelectric performance of MoS2, MoSe2, and WS2monolayers by using Boltzmann transport equation.

The potential for thermoelectric applications of two-dimensional materials is quite promising. Usingab-initiocalculations, we have investigated the electronic band structure, phonon band structure, electronic density of states, and phonon density of states of monolayers MoS2, MoSe2, and WS2. In order to compute the thermoelectric properties of monolayers MoS2, MoSe2, and WS2, we used theab-initiomodel suggested by Faghaniniaet al(2015Phys. Rev.B91235123). Within this model, by using inputs from density functional theory and considering all relevant elastic and inelastic scattering mechanisms, we have calculated the thermoelectric properties of monolayers MoS2, MoSe2, and WS2over various ranges of temperature (T) and carrier concentration (n). The obtained results of Seebeck coefficients (S) and figure of merit (ZT) atT= 300 K for bothn/p-types of monolayers MoS2, MoSe2, and WS2are in good agreement with the findings obtained by other models using the Boltzmann transport equation within a constant relaxation time framework.

An inhibitory acetylcholine receptor gates context dependent mechanosensory processing in C. elegans.

An animal's current behavior influences its response to sensory stimuli, but the molecular and circuit-level mechanisms of this context-dependent decision-making is not well understood. In the nematode C. elegans, inhibitory feedback from turning associated neurons alter downstream mechanosensory processing to gate the animal's response to stimuli depending on whether the animal is turning or moving forward [1-3]. Until now, the specific neurons and receptors that mediate this inhibitory feedback were not known. We use genetic manipulations, single-cell rescue experiments and high-throughput closed-loop optogenetic perturbations during behavior to reveal the specific neuron and receptor responsible for receiving inhibition and altering sensorimotor processing. An inhibitory acetylcholine gated chloride channel comprised of lgc-47 and acc-1 expressed in neuron RIM receives inhibitory signals from turning neurons and performs the gating that disrupts the worm's mechanosensory evoked reversal response.

On the mechanism of piezoresistance in nanocrystalline graphite.

Strain sensors are sensitive to mechanical deformations and enable the detection of strain also within integrated electronics. For flexible displays, the use of a seamlessly integrated strain sensor would be beneficial, and graphene is already in use as a transparent and flexible conductor. However, graphene intrinsically lacks a strong response, and only by engineering defects, such as grain boundaries, one can induce piezoresistivity. Nanocrystalline graphene (NCG), a derivative form of graphene, exhibits a high density of defects in the form of grain boundaries. It holds an advantage over graphene in easily achieving wafer-scale growth with controlled thickness. In this study, we explore the piezoresistivity in thin films of nanocrystalline graphite. Simultaneous measurements of sheet resistance and externally applied strain on NCG placed on polyethylene terephthalate (PET) substrates provide intriguing insights into the underlying mechanism. Raman measurements, in conjunction with strain applied to NCG grown on flexible glass, indicate that the strain is concentrated at the grain boundaries for smaller strain values. For larger strains, mechanisms such as grain rotation and the formation of nanocracks might contribute to the piezoresistive behavior in nanocrystalline graphene.

Disturbed flow regulates protein disulfide isomerase A1 expression via microRNA-204.

Redox processes can modulate vascular pathophysiology. The endoplasmic reticulum redox chaperone protein disulfide isomerase A1 (PDIA1) is overexpressed during vascular proliferative diseases, regulating thrombus formation, endoplasmic reticulum stress adaptation, and structural remodeling. However, both protective and deleterious vascular effects have been reported for PDIA1, depending on the cell type and underlying vascular condition. Further understanding of this question is hampered by the poorly studied mechanisms underlying PDIA1 expression regulation. Here, we showed that PDIA1 mRNA and protein levels were upregulated (average 5-fold) in the intima and media/adventitia following partial carotid ligation (PCL). Our search identified that miR-204-5p and miR-211-5p (miR-204/211), two broadly conserved miRNAs, share PDIA1 as a potential target. MiR-204/211 was downregulated in vascular layers following PCL. In isolated endothelial cells, gain-of-function experiments of miR-204 with miR mimic decreased PDIA1 mRNA while having negligible effects on markers of endothelial activation/stress response. Similar effects were observed in vascular smooth muscle cells (VSMCs). Furthermore, PDIA1 downregulation by miR-204 decreased levels of the VSMC contractile differentiation markers. In addition, PDIA1 overexpression prevented VSMC dedifferentiation by miR-204. Collectively, we report a new mechanism for PDIA1 regulation through miR-204 and identify its relevance in a model of vascular disease playing a role in VSMC differentiation. This mechanism may be regulated in distinct stages of atherosclerosis and provide a potential therapeutic target.

Understanding the variability of the electrophysiologic laryngeal adductor reflex.

OBJECTIVE: The laryngeal adductor reflex (LAR) is vital for airway protection and can be electrophysiologically obtained under intravenous general anesthesia (IGA). This makes the electrophysiologic LAR (eLAR) an important tool for monitoring of the vagus nerves and relevant brainstem circuitry during high-risk surgeries. We investigated the intra-class variability of normal and expected abnormal eLAR. METHODS: Repeated measures of contralateral R1 (cR1) were performed under IGA in 58 patients. Data on presence/absence of cR2 and potential confounders were also collected. Review of neuroimaging, pathology and clinical exam, allowed classification into normal and expected abnormal eLAR groups. Using univariate and multivariate analysis we studied the variability of cR1 parameters and their differences between the two groups. RESULTS: In both groups, cR1 latencies had coefficients of variation of <2%. In the abnormal group, cR1 had longer latencies, required higher activation currents and was more frequently desynchronized and unsustained; cR2 was more frequently absent. CONCLUSIONS: cR1 latencies show high analytical precision for measurements. Delayed onset, difficult to elicit, desynchronized and unsustained cR1, and absence of cR2 signal an abnormal eLAR. SIGNIFICANCE: Understanding the variability and behavior of normal and abnormal eLAR under IGA can aid in the interpretation of its changes during monitoring.

Visible Light-Promoted Regioselective Benzannulation of Vinyl Sulfoxonium Ylides with Ynoates.

Herein, we report a highly regioselective [4 + 2]-annulation of vinyl sulfoxonium ylides with ynoates under light-mediated conditions. The reaction proceeds through the new dienyl sulfoxonium ylide, which undergoes photolysis under blue light irradiation to give highly substituted naphthalene scaffolds. The method presented here operates at room temperature and does not require the addition of an external photosensitizer. The in situ-generated dienyl sulfoxonium ylide absorbs light and acts as a photosensitizer for the formation of arenes. The synthetic potential of these benzannulations was further illustrated by various synthetic transformations and a scale-up reaction. Moreover, control experiments and quantum chemical calculations reveal the mechanistic details of the developed reaction.

Genome-Wide Comparative Analysis of Five Amaranthaceae Species Reveals a Large Amount of Repeat Content.

Amaranthus is a genus of C4 dicotyledonous herbaceous plant species that are widely distributed in Asia, Africa, Australia, and Europe and are used as grain, vegetables, forages, and ornamental plants. Amaranth species have gained significant attention nowadays as potential sources of nutritious food and industrial products. In this study, we performed a comparative genome analysis of five amaranth species, namely, Amaranthus hypochondriacus, Amaranthus tuberculatus, Amaranthus hybridus, Amaranthus palmeri, and Amaranthus cruentus. The estimated repeat content ranged from 54.49% to 63.26% and was not correlated with the genome sizes. Out of the predicted repeat classes, the majority of repetitive sequences were Long Terminal Repeat (LTR) elements, which account for about 13.91% to 24.89% of all amaranth genomes. Phylogenetic analysis based on 406 single-copy orthologous genes revealed that A. hypochondriacus is most closely linked to A. hybridus and distantly related to A. cruentus. However, dioecious amaranth species, such as A. tuberculatus and A. palmeri, which belong to the subgenera Amaranthus Acnida, have formed their distinct clade. The comparative analysis of genomic data of amaranth species will be useful to identify and characterize agronomically important genes and their mechanisms of action. This will facilitate genomics-based, evolutionary studies, and breeding strategies to design faster, more precise, and predictable crop improvement programs.

Evaluation of Bond Strength and Adhesive Remnant Index of Different Lingual Retainers in Human Incisor Teeth.

Objective: This study aimed to evaluate and compare the bond strengths of four different lingual retainers and assess the adhesive remnant index (ARI) to determine their effectiveness in orthodontic retention. Methodology: Eighty human incisor teeth were divided into four groups, with each group bonded using a different retainer: Group 1 (E-Glass retainer), Group 2 (0.017" Co-axial stainless steel wire), Group 3 (Splint C.T. fiber mesh), and Group 4 (0.010" stainless steel ligature wire). Bond strength was measured using a universal testing machine, and ARI scores were recorded to assess bond failure types. Results: Group 1 (E-Glass retainer) demonstrated the highest bond strength, followed by Group 3 (Splint C.T. fiber mesh), Group 2 (Co-axial stainless steel wire), and Group 4 (stainless steel ligature wire). Cohesive bond failures were observed in most groups, except for the co-axial stainless steel wire group, which exhibited adhesive failures. Conclusion: E-Glass fiber-reinforced retainers showed the highest bond strength, making them a promising alternative to conventional stainless steel wires for orthodontic retention, especially in patients with esthetic concerns or nickel hypersensitivity. Stainless steel retainer groups exhibited lower bond strengths, and cohesive bond failures were prevalent. Further research is needed to validate these findings in clinical settings and evaluate the long-term effectiveness of different lingual retainers.

Clinical Evaluation of the Retention of Four Different Pit and Fissure Sealants on the First Permanent Molars - An Original Research.

Objective: In this study, the retention rates of four different pit and fissure sealant materials on the first permanent molars were clinically assessed and compared. Materials and Methods: A total of 120 kids aged 7 to 10 participated in a randomized controlled experiment. On their first permanent teeth, the subjects each got one of the four sealant materials (A, B, C, or D). Over the course of 24 months, the retention rates were evaluated every 6 months. The Chi-square test and Kaplan-Meier survival analysis were used for statistical analysis. Results: At 6, 12, 18, and 24 months, the following retention rates were observed overall: A (85%, 78%, 65%, 52%), B (90%, 82%, 70%, 60%), C (78%, 70%, 55%, 42%), and D (95%, 88%, 75%, 62%). At each time point, the sealant materials showed significant variations in retention rates (P 0.05). While sealants A and C showed lower retention rates, sealant D showed the best retention rates, followed by sealant B. Conclusion: This study shows that different materials have different retention rates for pit and fissure sealants on first permanent molars. Higher retention rates for sealants D and B suggest that they may be superior than sealants A and C. These results highlight how crucial it is to choose the right sealant materials to guarantee long-term retention and effectiveness in avoiding dental cavities.

Natural product inspired diastereoselective synthesis of sugar-derived pyrano[3,2-c]quinolones and their in-silico studies.

Herein, we report the development of a diastereoselective and efficient route to construct sugar-derived pyrano[3,2-c]quinolones utilizing 1-C-formyl glycal and 4-hydroxy quinolone annulation. This methodology will open a route to synthesize nature inspired pyrano[3,2-c]quinolones. This is the first report for the stereoselective synthesis of sugar-derived pyrano[3,2-c]quinolones, where 100% stereoselectivity was observed. A total of sixteen compounds have been synthesized in excellent yields with 100% stereoselectivity. The molecular docking of the synthesized novel natural product analogues demonstrated their binding modes within the active site of type II topoisomerase. The results of the in-silico studies displayed more negative binding energies for the all the synthesized compounds in comparison to the natural product huajiosimuline A, indicating their affinity for the active pocket. Ten out of the sixteen novel synthesized compounds were found to have comparative or relatively more negative binding energy in comparison to the standard anti-cancer drug, doxorubicin. Additionally, the scalability and viability of this protocol was illustrated by the gram scale synthesis.

LAP: Liability Antibody Profiler by sequence & structural mapping of natural and therapeutic antibodies.

Antibody-based therapeutics must not undergo chemical modifications that would impair their efficacy or hinder their developability. A commonly used technique to de-risk lead biotherapeutic candidates annotates chemical liability motifs on their sequence. By analyzing sequences from all major sources of data (therapeutics, patents, GenBank, literature, and next-generation sequencing outputs), we find that almost all antibodies contain an average of 3-4 such liability motifs in their paratopes, irrespective of the source dataset. This is in line with the common wisdom that liability motif annotation is over-predictive. Therefore, we have compiled three computational flags to prioritize liability motifs for removal from lead drug candidates: 1. germline, to reflect naturally occurring motifs, 2. therapeutic, reflecting chemical liability motifs found in therapeutic antibodies, and 3. surface, indicative of structural accessibility for chemical modification. We show that these flags annotate approximately 60% of liability motifs as benign, that is, the flagged liabilities have a smaller probability of undergoing degradation as benchmarked on two experimental datasets covering deamidation, isomerization, and oxidation. We combined the liability detection and flags into a tool called Liability Antibody Profiler (LAP), publicly available at lap.naturalantibody.com. We anticipate that LAP will save time and effort in de-risking therapeutic molecules.

An In Vitro Investigation of the Role of Implant Abutment Materials on the Fracture Resistance and Failure Mode of Implant-Supported Restorations.

BACKGROUND: Implant-supported restorations have gained popularity in modern dentistry, and the choice of abutment material is crucial for their long-term success. This in vitro study aimed to evaluate the fracture resistance and failure mode of implant-supported restorations using different abutment materials. METHODS: Ninety standardized implant-supported restorations were included in the study. Abutments made of titanium, zirconia, and a hybrid material (titanium base with a zirconia veneer) were evaluated. Standardized abutments were fabricated, and screw-retained restorations were fabricated using a resin-based composite material. Cyclic loading was applied using a universal testing machine to simulate masticatory forces. Fracture resistance was measured in terms of the number of cycles to failure (NCF), and failure modes were analyzed. RESULTS: The findings indicate that zirconia abutments exhibited higher fracture resistance compared to titanium and hybrid abutments. Longer implants demonstrated higher fracture resistance, suggesting improved stability and resistance to mechanical forces. Increased loading angles resulted in decreased fracture resistance of implant-supported restorations, emphasizing the need for proper occlusal adjustment. Central loading showed higher fracture resistance than lateral and posterior loading locations. The distribution of failure modes varied among the abutment materials, with bulk prosthesis fracture being the most common in the titanium group, while abutment fracture was predominant in the zirconia and hybrid groups. CONCLUSION: This in vitro study demonstrated that the choice of abutment material significantly influenced the fracture resistance and failure mode of implant-supported restorations. Zirconia abutments exhibited the highest fracture resistance, followed by hybrid and titanium abutments. The failure mode analysis revealed different patterns of failure for each abutment material.