Immobilization of europium and terbium ions with tunable ratios on a dispersible two-dimensional metal-organic framework for ratiometric photoluminescence detection of D2O.

A two-dimensional zirconium-based metal-organic framework (2D Zr-MOF), ZrBTB (BTB = 1,3,5-tri(4-carboxyphenyl)benzene), is used as a platform to simultaneously immobilize terbium ions and europium ions with tunable ratios on its hexa-zirconium nodes by a post-synthetic modification. The crystallinity, morphology, porosity and photoluminescence (PL) properties of the obtained 2D Zr-MOFs with various europium-to-terbium ratios are investigated. With the energy transfer from the excited BTB linker to the installed terbium ions and the energy transfer from terbium ions to europium ions, a low loading of immobilized europium ions and a high loading of surrounding terbium ions in the 2D Zr-MOF result in the optimal PL emission intensities of europium; this phenomenon is not observable for the physical mixture of both terbium-installed ZrBTB and europium-installed ZrBTB. The role of installed terbium ions as efficient mediators for the energy transfer from the excited BTB linker to the installed europium ion is confirmed by quantifying PL quantum yields. As a demonstration, these materials with modulable PL characteristics are applied for the ratiometric detection of D2O in water, with the use of the stable emission from the BTB linker as the reference. With the strong emission of immobilized europium ions and the good dispersity in aqueous solutions, the optimal bimetal-installed ZrBTB, Eu-Tb-ZrBTB(1 : 10), can achieve the sensing performance outperforming those of the terbium-installed ZrBTB, europium-installed ZrBTB and the physical mixture of both.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications.

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Correction: Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications.

Correction for 'Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications' by Saba Daliran et al., Chem. Soc. Rev., 2024, https://doi.org/10.1039/d3cs01057k.

Two-dimensional metal-organic framework for post-synthetic immobilization of graphene quantum dots for photoluminescent sensing.

Immobilization of graphene quantum dots (GQDs) on a solid support is crucial to prevent GQDs from aggregation in the form of solid powder and facilitate the separation and recycling of GQDs after use. Herein, spatially dispersed GQDs are post-synthetically coordinated within a two-dimensional (2D) and water-stable zirconium-based metal-organic framework (MOF). Unlike pristine GQDs, the obtained GQDs immobilized on 2D MOF sheets show photoluminescence in both suspension and dry powder. Chemical and photoluminescent stabilities of MOF-immobilized GQDs in water are investigated, and the use of immobilized GQDs in the photoluminescent detection of copper ions is demonstrated. Findings here shed the light on the use of 2D MOFs as a platform to further immobilize GQDs with various sizes and distinct chemical functionalities for a range of applications.

Post-Synthetic Cyano-ferrate(II) Functionalization of a Metal-Organic Framework, NU-1000.

Starting with ferrocyanide ions in acidic aqueous solution, cyano-ferrate(II) species are post-synthetically grafted to the nodes of a mesoporous zirconium-based MOF, NU-1000. As indicated by single-crystal X-ray crystallography, grafting occurs by substitution of cyanide ligands by node-based hydroxo and oxo ligands rather than by substitution of node aqua ligands by cyanide ligands as bridges between Fe(II) and Zr(IV). The installed moieties yield a broad absorption band that is tentatively ascribed to iron-to-zirconium charge transfer. Consistent with Fe(III/II) redox activity, a modest fraction of the installed iron complexes are directly electrochemically addressable.

Metal-Organic Framework-Derived Electrocatalysts Competent for the Conversion of Acrylonitrile to Adiponitrile.

Electrochemical conversion of acrylonitrile (AN) to produce adiponitrile (ADN), the raw material for the production of Nylon 66, has become a crucial process owing to the increasing market demand of Nylon 66. Although the metallic Pb or Cd electrodes are commonly used for this reaction, the use of electrocatalysts or electrodes modified with catalysts has been barely investigated. In this study, nanoporous and electrically conductive metal-organic framework (MOF)-derived materials composed of Pb, PbO, and carbon are synthesized by carbonizing a Pb-based MOF through thermal treatments, and these MOF-derived materials are served as electrocatalysts for the electrosynthesis of ADN. The crystallinity, morphology, elemental composition, porosity, electrical conductivity, and electrochemically active surface area of each MOF-derived material are investigated. Mass-transport-corrected Tafel analysis is used to probe the enhanced kinetics for the electrochemical reduction of AN occurring at the electrode modified with the MOF-derived material. Electrolytic experiments at various applied potentials are conducted to quantify the production rate and Faradaic efficiency toward ADN, and the result shows that the MOF-derived materials can act as electrocatalysts to initiate the electrochemical reduction of AN to produce ADN at a reduced overpotential. The optimal MOF-derived electrocatalyst can achieve a Faradaic efficiency of 67% toward ADN at an applied potential of -0.85 V versus reversible hydrogen electrode─a much lower overpotential compared to that typically required for this reaction without the use of catalysts. Findings here shed light on the design and development of advanced electrocatalysts to boost the performances for the electrosynthesis of ADN.

Metal-organic framework functionalized poly-cyclodextrin membranes confining polyaniline for charge storage.

Crystals of a metal-organic framework, UiO-66, are grown on electrospun crosslinked poly-cyclodextrin (poly-CD) fibrous membranes with an ultrahigh coverage, and polyaniline (PANI) is further confined within the MOF pores. The obtained PANI@UiO-66/poly-CD membranes are used as free-standing electrodes towards use in wearable energy-storage devices.

3D Printing of Metal-Organic Framework-Based Ionogels: Wearable Sensors with Colorimetric and Mechanical Responses.

Soft ionotronics are emerging materials as wearable sensors for monitoring physiological signals, sensing environmental hazards, and bridging the human-machine interface. However, the next generation of wearable sensors requires multiple sensing capabilities, mechanical toughness, and 3D printability. In this study, a metal-organic framework (MOF) and three-dimensional (3D) printing were integrated for the synthesis of a tough MOF-based ionogel (MIG) for colorimetric and mechanical sensing. The ink for 3D printing contained deep eutectic solvents (DESs), cellulose nanocrystals (CNCs), MOF crystals, and acrylamide. After printing, further photopolymerization resulted in a second covalently cross-linked poly(acrylamide) network and solidification of MIG. As a porphyrinic Zr-based MOF, MOF-525 served as a functional filler to provide sharp color changes when exposed to acidic compounds. Notably, MOF-525 crystals also provided another design space to tune the printability and mechanical strength of MIG. In addition, the printed MIG exhibited high stability in the air because of the low volatility of DESs. Thereafter, wearable auxetic materials comprising MIG with negative Poisson's ratios were prepared by 3D printing for the detection of mechanical deformation. The resulting auxetic sensor exhibited high sensitivity via the change in resistance upon mechanical deformation and a conformal contact with skins to monitor various human body movements. These results demonstrate a facile strategy for the construction of multifunctional sensors and the shaping of MOF-based composite materials.

Probing the electronic and ionic transport in topologically distinct redox-active metal-organic frameworks in aqueous electrolytes.

Three topologically distinct zirconium-based metal-organic frameworks (Zr-MOFs) constructed from redox-innocent linkers, MOF-808, defective UiO-66, and CAU-24, are synthesized, and the spatially dispersed redox-active manganese sites are post-synthetically immobilized on the hexa-zirconium nodes of these Zr-MOFs. The crystallinity, morphology, porosity, manganese loading, and bulk electrical conductivity of each material are studied. The redox-hopping-based electrochemical reaction between the installed Mn(III) and Mn(IV) occurring within the thin films of these MOFs in aqueous electrolytes is investigated, in the presence of various concentrations of Na2SO4 in the electrolytes. Cyclic voltammetry is used to qualitatively study the redox-hopping process, and chronoamperometry is used to quantify the electrochemically active fractions of manganese sites within the MOF thin film as well as the values of apparent diffusivity for the redox-hopping process. By adjusting the concentration of Na2SO4 in the electrolyte, the rate-determining step for the redox-hopping process can be tuned from ionic transport to electronic transport, and the Mn-decorated MOF-808, which possesses the largest pore size, can achieve the highest value of apparent diffusivity. Findings here shed light on the selection of Zr-MOF as well as the choice of electrolyte concentration for the applications of MOFs in supercapacitors and electrocatalysis relying on such redox-hopping processes in aqueous electrolytes.

Proton-Conductive Cerium-Based Metal-Organic Frameworks.

In this study, proton-conducting behaviors of a cerium-based metal-organic framework (MOF), Ce-MOF-808, its zirconium-based isostructural MOF, and bimetallic MOFs with various Zr-to-Ce ratios are investigated. The significantly increased proton conductivity (σ) and decreased activation energy (Ea) are obtained by substituting Zr with Ce in the nodes of MOF-808. Ce-MOF-808 achieves a σ of 4.4 × 10-3 S/cm at 25 °C under 99% relative humidity and an Ea of 0.14 eV; this value is among the lowest-reported Ea of proton-conductive MOFs. Density functional theory calculations are utilized to probe the proton affinities of these MOFs. As the first study reporting the proton conduction in cerium-based MOFs, the finding here suggests that cerium-based MOFs should be a better platform for the design of proton conductors compared to the commonly reported zirconium-based MOFs in future studies on energy-related applications.

Transport Diffusion of Linear Alkanes (C5-C16) through Thin Films of ZIF-8 as Assessed by Quartz Crystal Microgravimetry.

We report uptake capacities and transport diffusivities, D, for each of eight linear alkanes (ranging from C5 to C16) in quartz crystal-supported films of solvent-evacuated ZIF-8. Analyses of the alkane uptake profiles revealed that the transport dynamics are governed by guest diffusion through metal-organic framework (MOF) (ZIF-8) crystallites rather than by rates of entry into films at the MOF/vapor interface. The obtained diffusivities range from just over 10-18 m2/s to just under 10-14 m2/s. Notably, minimum cross-sectional widths for all guests exceed the crystallographically measured width of ZIF-8's largest apertures and imply consistently with previous experimental and computational studies that apertures expand to accommodate guest uptake. On average, each additional carbon decreases the transport diffusivity of an alkane by twofold. Closer examination, however, reveals an odd-even effect such that linear alkanes having even numbers of carbons diffuse more rapidly than alkanes featuring one more or one less carbon atom. Thus, ZIF-8's differentiation of transport diffusivities for pairs of alkanes differing in length by only one carbon atom can be significantly greater than the aforementioned factor of 2. Elucidation of the microscopic basis for the odd-even behavior, however, awaits the outcome of molecular dynamics calculations that are beyond the scope of the present study. For compact, solvothermally prepared films, guest transport is dominated by 1D diffusion from the film/vapor interface and toward the underlying quartz crystal. For much lower density, electrophoretically deposited (EPD) films, crystallites behave nearly independently, and guest transport can be adequately modeled by assuming rapid permeation of macroscopic voids between crystallites, followed by entry and rate-limiting radial diffusion into isolated crystallites. One consequence is that EPD films can be much more rapidly infiltrated by molecular guests than can compact, solvothermally grown films. The combined results have potentially favorable implications for the development of kinetic separation schemes for closely related analytes.

Cerium-Based Metal-Organic Framework Nanocrystals Interconnected by Carbon Nanotubes for Boosting Electrochemical Capacitor Performance.

In this study, nanocrystals of a cerium-based metal-organic framework (Ce-MOF), Ce-MOF-808, are directly grown on the surface of carboxylic acid-functionalized carbon nanotubes (CNTs) by a facile one-step solvothermal synthesis method. Ce-MOF-CNT nanocomposites with various Ce-MOF-to-CNT ratios are synthesized, and their crystallinity, morphology, porosity, and electrical conductivity are examined. The redox-hopping and electrochemical behaviors of the pristine Ce-MOF in aqueous electrolytes are investigated, suggesting that the pristine Ce-MOF is electrochemically active but possesses a limited charge-transport behavior. As a demonstration, all the Ce-MOF, CNT, and nanocomposites are used as active materials for application in aqueous-based supercapacitors. The capacitive performance of the CNT can be significantly boosted with the help of redox-active Ce-MOF-808 nanocrystals.

Selective Formation of Polyaniline Confined in the Nanopores of a Metal-Organic Framework for Supercapacitors.

In this study, a strategy that can result in the polyaniline (PANI) solely confined within the nanopores of a metal-organic framework (MOF) without forming obvious bulk PANI between MOF crystals is developed. A water-stable zirconium-based MOF, UiO-66-NH2 , is selected as the MOF material. The polymerization of aniline is initiated in the acidic suspension of UiO-66-NH2 nanocrystals in the presence of excess poly(sodium 4-styrenesulfonate) (PSS). Since the pore size of UiO-66-NH2 is too small to enable the insertion of the bulky PSS, the quick formation of pore-confined solid PANI and the slower formation of well dispersed PANI:PSS occur within the MOF crystals and in the bulk solution, respectively. By taking advantage of the resulting homogeneous PANI:PSS polymer solution, the bulk PANI:PSS can be removed from the PANI/UiO-66-NH2 solid by successive washing the sample with fresh acidic solutions through centrifugation. As this is the first time reporting the PANI solely confined in the pores of a MOF, as a demonstration, the obtained PANI/UiO-66-NH2 composite material is applied as the electrode material for supercapacitors. The PANI/UiO-66-NH2 thin films exhibit a pseudocapacitive electrochemical characteristic, and their resulting electrochemical activity and charge-storage capacities are remarkably higher than those of the bulk PANI thin films.

Polyoxometalate adsorbed in a metal-organic framework for electrocatalytic dopamine oxidation.

A redox-active vanadium-based polyoxometalate, V10O28, was post-synthetically immobilized into a water-stable zirconium-based metal-organic framework, NU-902. The adsorbed V10O28 in NU-902 renders charge hopping in the framework in aqueous electrolytes, and the obtained V10O28@NU-902 can be used as a heterogeneous electrocatalyst for electrochemical dopamine sensors.

Charge Transport in Zirconium-Based Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) are a class of crystalline porous materials characterized by inorganic nodes and multitopic organic linkers. Because of their molecular-scale porosity and periodic intraframework chemical functionality, MOFs are attractive scaffolds for supporting and/or organizing catalysts, photocatalysts, chemical-sensing elements, small enzymes, and numerous other functional-property-imparting, nanometer-scale objects. Notably, these objects can be installed after the synthesis of the MOF, eliminating the need for chemical and thermal compatibility of the objects with the synthesis milieu. Thus, postsynthetically functionalized MOFs can present three-dimensional arrays of high-density, yet well-separated, active sites. Depending on the application and corresponding morphological requirements, MOF materials can be prepared in thin-film form, pelletized form, isolated single-crystal form, polycrystalline powder form, mixed-matrix membrane form, or other forms. For certain applications, most obviously catalytic hydrolysis and electro- or photocatalytic water splitting, but also many others, an additional requirement is water stability. MOFs featuring hexa-zirconium(IV)-oxy nodes satisfy this requirement. For applications involving electrocatalysis, charge storage, photoelectrochemical energy conversion, and chemiresistive sensing, a further requirement is electrical conductivity, as embodied in electron or hole transport. As most MOFs, under most conditions, are electrically insulating, imparting controllable charge-transport behavior is both a chemically intriguing and chemically compelling challenge.Herein, we describe three strategies to render zirconium-based metal-organic frameworks (MOFs) tunably electrically conductive and, therefore, capable of transporting charge on the few nanometers (i.e., several molecular units) to few micrometers (i.e., typical dimensions for MOF microcrystallites) scale. The first strategy centers on redox-hopping between periodically arranged, chemically equivalent sites, essentially repetitive electron (or hole) self-exchange. Zirconium nodes are electrically insulating, but they can function as grafting sites for (a) redox-active inorganic clusters or (b) molecular redox couples. Alternatively, charge hopping based on linker redox properties can be exploited. Marcus's theory of electron transfer has proven useful for understanding/predicting trends in redox-hopping based conductivity, most notably, in accounting for variations as great as 3000-fold depending on the direction of charge propagation through structurally anisotropic MOFs. In MOF environments, propagation of electronic charge via redox hopping is necessarily accompanied by movement of charge-compensating ions. Consequently, rates of redox hopping can depend on both the identity and concentration of ions permeating the MOF. In the context of electrocatalysis, an important goal is to transport electronic charge fast enough to match or exceed the inherent activity of MOF-based or MOF-immobilized catalysts.Bandlike electronic conductivity is the focus of an alternative strategy: one based on the introduction of molecular guests capable of forming donor-acceptor charge transfer complexes with the host framework. Theory again can be applied predictively to alter conductivity. A third strategy similarly emphasizes electronic conductivity, but it makes use of added bridges in the form of molecular oligomers or inorganic clusters that can then be linked to span the length of a MOF crystallite. For all strategies, retention of molecular-scale porosity is emphasized, as this property is key to many applications. Finally, while our focus is on Zr-MOFs, the described approaches clearly are extendable to other MOF compositions, as has already been demonstrated, in part, in studies by others.

Anisotropic Redox Conductivity within a Metal-Organic Framework Material.

Engendering electrical conductivity in otherwise insulating metal-organic framework (MOF) materials is key to rendering these materials fully functional for a range of potential applications, including electrochemical and photo-electrochemical catalysis. Here we report that the platform MOF, NU-1000, can be made electrically conductive via reversible electrochemical oxidation of a fraction of the framework's tetraphenylpyrene linkers, where the basis for conduction is redox hopping. At a microscopic level, redox hopping is akin to electron self-exchange and is describable by Marcus' well-known theory of electron transfer. At a macroscopic level, the hopping behavior leads to diffusive charge transport and is quantifiable as an apparent diffusion coefficient, Dhopping. Theory suggests that the csq topology of NU-1000, together with its characteristic one-dimensional mesopores, will result in direction-dependent, that is, anisotropic, electrical conductivity. Detailed computations suggest that the governing factor is the strength of electronic coupling between pairs of linkers sited in the a,b plane of the MOF versus the mesopore-aligned c axis of the crystal. The notion has been put to the test experimentally by configuring the MOF as an array of selectively oriented, electrode-supported crystallites, where the rodlike crystallites are either oriented largely normal to the electrode (requiring redox hopping along the c direction) or mainly parallel (requiring redox hopping mainly through the a,b plane). The orientations are preselected by preparing MOF films either via interfacial solvothermal synthesis or via electrophoretic deposition. In semiquantitative accord with computational predictions, Dhopping is up to ∼3500 times larger in the c direction than through the a,b plane. In addition to their fundamental significance, the findings have clear implications for the design and optimization of MOFs for electrocatalysis and for other applications that rely upon electrical conductivity.

Impregnation of Graphene Quantum Dots into a Metal-Organic Framework to Render Increased Electrical Conductivity and Activity for Electrochemical Sensing.

Graphene quantum dots (GQD) with an average size of 3.1 nm were incorporated into a mesoporous porphyrinic zirconium-based metal-organic framework (MOF) by direct impregnation to render the donor-acceptor charge transfer from GQDs to porphyrinic linkers. The hybrid material still possesses around half porosity of the pristine MOF and shows a 100-fold higher electrical conductivity compared to that of the parent MOF. By utilizing the porphyrinic linkers as catalytically active units, the GQD-MOF material exhibits a better electrochemical sensing activity toward nitrite in aqueous solutions compared to both the pristine MOF and GQD.

Stabilization of Formate Dehydrogenase in a Metal-Organic Framework for Bioelectrocatalytic Reduction of CO2.

The efficient fixation of excess CO2 from the atmosphere to yield value-added chemicals remains crucial in response to the increasing levels of carbon emission. Coupling enzymatic reactions with electrochemical regeneration of cofactors is a promising technique for fixing CO2 , while producing biomass which can be further transformed into biofuels. Herein, a bioelectrocatalytic system was established by depositing crystallites of a mesoporous metal-organic framework (MOF), termed NU-1006, containing formate dehydrogenase, on a fluorine-doped tin oxide glass electrode modified with Cp*Rh(2,2'-bipyridyl-5,5'-dicarboxylic acid)Cl2 complex. This system converts CO2 into formic acid at a rate of 79±3.4 mm h-1 with electrochemical regeneration of the nicotinamide adenine dinucleotide cofactor. The MOF-enzyme composite exhibited significantly higher catalyst stability when subjected to non-native conditions compared to the free enzyme, doubling the formic acid yield.

Core-Shell Gold Nanorod@Zirconium-Based Metal-Organic Framework Composites as in Situ Size-Selective Raman Probes.

Nanoparticle encapsulation inside zirconium-based metal-organic frameworks (NP@MOF) is hard to control, and the resulting materials often have nonuniform morphologies with NPs on the external surface of MOFs and NP aggregates inside the MOFs. In this work, we report the controlled encapsulation of gold nanorods (AuNRs) by a scu-topology Zr-MOF, via a room-temperature MOF assembly. This is achieved by functionalizing the AuNRs with poly(ethylene glycol) surface ligands, allowing them to retain colloidal stability in the precursor solution and to seed the MOF growth. Using this approach, we achieve core-shell yields exceeding 99%, tuning the MOF particle size via the solution concentration of AuNRs. The functionality of AuNR@MOFs is demonstrated by using the AuNRs as embedded probes for selective surface-enhanced Raman spectroscopy (SERS). The AuNR@MOFs are able to both take-up or block molecules from the pores, thereby facilitating highly selective sensing at the AuNR ends. This proof-of-principle study serves to present both the outstanding level of control in the synthesis and the high potential for AuNR@Zr-MOF composites for SERS.

Direct Imaging of Isolated Single-Molecule Magnets in Metal-Organic Frameworks.

Practical applications involving the magnetic bistability of single-molecule magnets (SMMs) for next-generation computer technologies require nanostructuring, organization, and protection of nanoscale materials in two- or three-dimensional networks, to enable read-and-write processes. Owing to their porous nature and structural long-range order, metal-organic frameworks (MOFs) have been proposed as hosts to facilitate these efforts. Although probing the channels of MOF composites using indirect methods is well established, the use of direct methods to elucidate fundamental structural information is still lacking. Herein we report the direct imaging of SMMs encapsulated in a mesoporous MOF matrix using high-resolution transmission electron microscopy. These images deliver, for the first time, direct and unambiguous evidence to support the adsorption of molecular guests within the porous host. Bulk magnetic measurements further support the successful nanostructuring of SMMs. The preparation of the first magnetic composite thin films of this kind furthers the development of molecular spintronics.