Effects of Ionic Strength, Salt, and pH on Aggregation of Boehmite Nanocrystals: Tumbler Small-Angle Neutron and X-ray Scattering and Imaging Analysis.

The US government currently spends significant resources managing the legacies of the Cold War, including 300 million liters of highly radioactive wastes stored in hundreds of tanks at the Hanford (WA) and Savannah River (SC) sites. The materials in these tanks consist of highly radioactive slurries and sludges at very high pH and salt concentrations. The solid particles primarily consist of aluminum hydroxides and oxyhydroxides (gibbsite and boehmite), although many other materials are present. These form complex aggregates that dramatically affect the rheology of the solutions and, therefore, efforts to recover and treat these wastes. In this paper, we have used a combination of transmission and cryo-transmission electron microscopy, dynamic light scattering, and X-ray and neutron small and ultrasmall-angle scattering to study the aggregation of synthetic nanoboehmite particles at pH 9 (approximately the point of zero charge) and 12, and sodium nitrate and calcium nitrate concentrations up to 1 m. Although the initial particles form individual rhombohedral platelets, once placed in solution they quickly form well-bonded stacks, primary aggregates, up to ∼1500 Å long. These are more prevalent at pH = 12. Addition of calcium nitrate or sodium nitrate has a similar effect as lowering pH, but approximately 100 times less calcium than sodium is needed to observe this effect. These aggregates have fractal dimension between 2.5 and 2.6 that are relatively unaffected by salt concentration for calcium nitrate at high pH. Larger aggregates (>∼4000 Å) are also formed, but their size distributions are discrete rather than continuous. The fractal dimensions of these aggregates are strongly pH-dependent, but only become dependent on solute at high concentrations.

Nanoscale Structure of the Oil-Water Interface.

X-ray reflectivity (XR) and atomistic molecular dynamics (MD) simulations, carried out to determine the structure of the oil-water interface, provide new insight into the simplest liquid-liquid interface. For several oils (hexane, dodecane, and hexadecane) the XR shows very good agreement with a monotonic interface-normal electron density profile (EDP) broadened only by capillary waves. Similar agreement is also found for an EDP including a sub-Å thick electron depletion layer separating the oil and the water. The XR and MD derived depletions are much smaller than reported for the interface between solid-supported hydrophobic monolayers and water.

Structural changes in single membranes in response to an applied transmembrane electric potential revealed by time-resolved neutron/X-ray interferometry.

The profile structure of a hybrid lipid bilayer, tethered to the surface of an inorganic substrate and fully hydrated with a bulk aqueous medium in an electrochemical cell, was investigated as a function of the applied transbilayer electric potential via time-resolved neutron reflectivity, enhanced by interferometry. Significant, and fully reversible structural changes were observed in the distal half (with respect to the substrate surface) of the hybrid bilayer comprised of a zwitterionic phospholipid in response to a +100mV potential with respect to 0mV. These arise presumably due to reorientation of the electric dipole present in the polar headgroup of the phospholipid and its resulting effect on the thickness of the phospholipid's hydrocarbon chain layer within the hybrid bilayer's profile structure. The profile structure of the voltage-sensor domain from a voltage-gated ion channel protein within a phospholipid bilayer membrane, tethered to the surface of an inorganic substrate and fully hydrated with a bulk aqueous medium in an electrochemical cell, was also investigated as a function of the applied transmembrane electric potential via time-resolved X-ray reflectivity, enhanced by interferometry. Significant, fully-reversible, and different structural changes in the protein were detected in response to ±100mV potentials with respect to 0mV. The approach employed is that typical of transient spectroscopy, shown here to be applicable to both neutron and X-ray reflectivity of thin films.

Kondo correlations and Majorana bound states in a metal to quantum-dot to topological-superconductor junction.

Electron transport through a normal-metal-quantum-dot-topological-superconductor junction is studied and reveals interlacing physics of Kondo correlations with two Majorana fermions bound states residing on the opposite ends of the topological superconductor. When the strength of the Majorana fermion coupling exceeds the temperature T, this combination of Kondo-Majorana fermion physics might be amenable for an experimental test: The usual peak of the temperature dependent zero bias conductance σ(V=0,T) splits and the conductance has a dip at T=0. The heights of the conductance side peaks decrease with magnetic field.

Surface layering at the mercury-electrolyte interface.

X-ray reflectometry reveals atomic layering at a liquid-liquid interface--mercury in a 0.01 M NaF solution. The interface width exceeds capillary wave theory predictions and displays an anomalous dependence on the voltage applied across it, displaying a minimum positive of the potential of zero charge. The latter is explained by electrocapillary effects and an additional intrinsic broadening of the interface profile, tentatively assigned to polarization of the conduction electrons due to the electric field of the electrochemical double layer at the interface.

Synthetic polypeptide adsorption to Cu-IDA containing lipid films: a model for protein-membrane interactions.

Adsorption of synthetic alanine-rich peptides to lipid monolayers was studied by X-ray and neutron reflectivity, grazing incidence X-ray diffraction (GIXD), and circular dichroic spectroscopy. The peptides contained histidine residues to drive adsorption to Langmuir monolayers of lipids with iminodiacetate headgroups loaded with Cu2+. Adsorption was found to be irreversible with respect to bulk peptide concentration. The peptides were partially helical in solution at room temperature, the temperature of the adsorption assays. Comparisons of the rate of binding and the structure of the adsorbed layer were made as a function of the number of histidines (from 0 to 2) and also as a function of the positioning of the histidines along the backbone. For peptides containing two histidines on the same side of the helical backbone, large differences were observed in the structure of the adsorbed layer as a function of the spacing of the histidines. With a spacing of 6 A, there was a substantial increase in helicity upon binding (from 17% to 31%), and the peptides adsorbed to a final density approaching that of a nearly completed monolayer of alpha-helices adsorbed side-on. The thickness of the adsorbed layer (17 +/- 2.5 A) was slightly greater than the diameter of alpha-helices, suggesting that the free, unstructured ends extended into solution. With a spacing of 30 A between histidines, a far weaker increase in helicity upon binding was observed (from 13% to 19%) and a much lower packing density resulted. The thickness of the adsorbed layer (10 +/- 4 A) was smaller, consistent with the ends being bound to the monolayer. Striking differences were observed in the interaction of the two types of peptide with the lipid membrane by GIXD, consistent with binding by two correlated sites only for the case of 6 A spacing. All these results are attributed to differences in spatial correlation between the histidines as a function of separation distance along the backbone for these partially helical peptides. Finally, control over orientation was demonstrated by placing a histidine on an end of the sequence, which resulted in adsorbed peptides oriented perpendicular to the membrane.

Oligomerization of membrane-bound diphtheria toxin (CRM197) facilitates a transition to the open form and deep insertion.

Diphtheria toxin (DT) contains separate domains for receptor-specific binding, translocation, and enzymatic activity. After binding to cells, DT is taken up into endosome-like acidic compartments where the translocation domain inserts into the endosomal membrane and releases the catalytic domain into the cytosol. The process by which the catalytic domain is translocated across the endosomal membrane is known to involve pH-induced conformational changes; however, the molecular mechanisms are not yet understood, in large part due to the challenge of probing the conformation of the membrane-bound protein. In this work neutron reflection provided detailed conformational information for membrane-bound DT (CRM197) in situ. The data revealed that the bound toxin oligomerizes with increasing DT concentration and that the oligomeric form (and only the oligomeric form) undergoes a large extension into solution with decreasing pH that coincides with deep insertion of residues into the membrane. We interpret the large extension as a transition to the open form. These results thus indicate that as a function of bulk DT concentration, adsorbed DT passes from an inactive state with a monomeric dimension normal to the plane of the membrane to an active state with a dimeric dimension normal to the plane of the membrane.

X-ray and ellipsometric study of strong critical adsorption.

Carpenter [Phys. Rev. E 61, 532 (2000)] succeeded in determining a single universal model, called the P1 model, that could describe the ellipsometric critical adsorption data from the liquid-vapor interface of four different critical binary liquid mixtures near their critical demixing temperatures. The P1 model also recently has been used to describe neutron reflectometry data from a critical liquid mixture/crystalline quartz interface. However, in another recent study, the P1 model failed to simultaneously describe x-ray reflectometry and ellipsometry data from the liquid-vapor surface of the critical mixture n -dodecane + tetrabromoethane (DT). In this paper, we resolve this discrepancy between x-ray and ellipsometric data for the DT system. At large length scales (far from the interface) the local concentration is described by the P1 model in order to correctly reproduce the temperature dependence of the ellipsometric data. Close to the interface, however, the molecular structure must be correctly accounted for in order to quantitatively explain the x-ray data. An important conclusion that arises from this study is that neutron or x-ray reflectometry is most sensitive to short-range interfacial structure, but may provide misleading information about long-range interfacial structure. Ellipsometry provides a more accurate measure of this long-range interfacial structure. Complex interfacial structures, possessing both short- and long-range structure, are therefore best studied using multiple techniques.

Windowless transition between atmospheric pressure and high vacuum via differential pumping for synchrotron radiation applications.

A differential pump assembly is introduced which can provide a windowless transition between the full atmospheric pressure of an in-air sample environment and the high-vacuum region of a synchrotron radiation beamline, while providing a clear aperture of approximately 1 mm to pass through the X-ray beam from a modern third-generation synchrotron radiation source. This novel pump assembly is meant to be used as a substitute for an exit vacuum window on synchrotron beamlines, where the existence of such a window would negatively impact the coherent nature of the X-ray beam or would introduce parasitic scattering, distorting weak scattering signals from samples under study. It is found that the length of beam pipe necessary to reduce atmospheric pressure to below 10 mbar is only about 130 mm, making the expected photon transmission for hard X-rays through this pipe competitive with that of a regular Be beamline window. This result is due to turbulent flow dominating the first pumping stage, providing a mechanism of strong gas conductance limitation, which is further enhanced by introducing artificial surface roughness in the pipe. Successive reduction of pressure through the transitional flow regime into the high-vacuum region is accomplished over a length of several meters, using beam pipes of increasing diameter. While the pump assembly has not been tested with X-rays, possible applications are discussed in the context of coherent and small-angle scattering.

The surface structure of concentrated aqueous salt solutions.

The surface-normal electron density profile rhos(z) of concentrated aqueous salt solutions of RbBr, CsCl, LiBr, RbCl, and SrCl2 was determined by x-ray reflectivity (XR). For all but RbBr and SrCl2 rhos(z) increases monotonically with depth z from rhos(z)=0 in the vapor (z<0) to rhos(z)=rhob of the bulk (z>0) over a width of a few angstroms. The width is commensurate with the expected interface broadening by thermally excited capillary waves. Anomalous (resonant) XR of RbBr reveals a depletion at the surface of Br- ions to a depth of approximately 10 A. For SrCl2, the observed rhos(z)>rhob may imply a similar surface depletion of Cl- ions to a depth of a few angstorms. However, as the deviations of the XRs of RbBr and SrCl2 from those of the other solutions are small, the evidence for a different ion composition in the surface and the bulk is not strongly conclusive. Overall, these results contrast earlier theoretical and simulational results and nonstructural measurements, where significant surface layering of alternate, oppositely charged, ions is concluded.

X-ray specular reflectivity study of a critical binary fluid mixture.

We have used direct inversion of x-ray reflectivity data to extract the liquid-vapor interface composition profile and the related critical scaling function of a binary mixture of dodecane and tetrabromoethane. The mixture was in the one-phase region above its critical point. The results indicate the formation of a monolayer of the lower surface tension component followed by an abrupt change to a mixed composition which gradually relaxes to the bulk composition deep within the fluid.

Cholesterol monohydrate nucleation in ultrathin films on water.

The growth of a cholesterol crystalline phase, three molecular layers thick at the air-water interface, was monitored by grazing incidence x-ray diffraction and x-ray reflectivity. Upon compression, a cholesterol film transforms from a monolayer of trigonal symmetry and low crystallinity to a trilayer, composed of a highly crystalline bilayer in a rectangular lattice and a disordered top cholesterol layer. This system undergoes a phase transition into a crystalline trilayer incorporating ordered water between the hydroxyl groups of the top and middle sterol layers in an arrangement akin to the triclinic 3-D crystal structure of cholesterol x H(2)O. By comparison, the cholesterol derivative stigmasterol transforms, upon compression, directly into a crystalline trilayer in the rectangular lattice. These results may contribute to an understanding of the onset of cholesterol crystallization in pathological lipid deposits.

Crystalline films of interdigitated structures formed via amidinium-carboxylate interactions at the air-water interface.

Electrostatic interactions between amidinium and carboxylates were used for the construction of interdigitated architectures at the air-solution interface. Spreading the water-insoluble amphiphile p-pentadecylbenzoic acid (A) on an aqueous solution of p-methylbenzamidinium (B) ions results in an intercalation of the water-soluble base between the acidic headgroups of the water-insoluble amphiphile to form an amorphousA-B-A-B monolayer according to grazing incidence X-ray diffraction (GIXD) and X-ray reflectivity measurements. Upon compression the monolayer transforms into a crystalline film composed of three bilayers with interdigitated hydrocarbon chains, and a top layer whose chains are disordered. Water-insoluble p-heptadecylbenzamidinium spread on an aqueous solution of benzoic acid displays a surface pressure-area isotherm similar to that obtained from the above system. A mechanism that accounts for the formation of these films is presented. Deposition of p-heptadecylbenzamidinium and p-pentadecylbenzoic acid amphiphiles in a 1:1 ratio on pure water led to the formation of a crystalline monolayer phase but which is partially disordered. Over an aqueous solution containing a 1:1 mixture of benzamidinium and benzoic acid no measurable binding of these solute molecules to the polar headgroups of the 1:1 mixed monolayer could be detected by X-ray reflectivity or GIXD.

Oriented crystalline monolayers and bilayers of 2 x 2 silver(I) grid architectures at the air-solution interface: their assembly and crystal structure elucidation

Oriented crystalline monolayers, approximately 14 A thick, of a 2 x 2 Ag+ grid complex, self-assembled at the air-solution interface starting from an water-insoluble ligand 3,6-bis[2-(6-phenylpyridine)]pyridazine spread on silver-ion-containing solutions, were examined by grazing-incidence X-ray diffraction and specular X-ray reflectivity using synchrotron radiation. The monolayer structure was refined, including a determination of the positions of the counter-ions, with the SHELX-97 computer program. The monolayers were transferred from the interface onto various solid supports and visualized by scanning force microscopy, and characterized by X-ray photoelectron spectroscopy in terms of molecular structure. On surface compression, the initial self-assembled monolayer undergoes a transition to a crystalline bilayer in which the two layers, almost retaining the original arrangement, are in registry. Such a phase transition is of relevance to the understanding of crystal nucleation.

New molecular complexes of heterocyclic bis-adducts with bacterial lectins: synthesis and structure-activity relationship studies.

A strongly antitumour effect has been discovered for lectins of Bacillus bacteria [Bacillus subtilis 668(1 + 2)IMV, Bacillus polymyxa 102(1 + 2) KGU] and for their molecular complexes with some heterocyclic bis-adducts of unsubstituted benzimidazole and 6-methyluracile for the first time. These were tested on the tumours: Lymphosarcoma Plissa, Sarcoma 45, Carcinosarcoma Yokera 256. A new convenient method for the preparation of the heterocyclic bisadducts of imidazole, benzimidazole, uraciles with 1,1,1-trifluoro-2-bromo-2-chloroethane is described. The reactions are catalysed by the 18-crown-6-complex.

Formation of Chiral Interdigitated Multilayers at the Air-Liquid Interface Through Acid-Base Interactions

Thin interdigitated films composed of a long-chain, water-insoluble chiral acid (p-pentadecylmandelic acid of absolute configuration R) and a water-soluble chiral base (phenylethylamine, R') were constructed at the air-solution interface. The (R, R') structure was characterized to near-atomic resolution by grazing-incidence x-ray diffraction (GIXD). The two diastereomeric systems, (R, R') and (R, S'), demonstrate similar surface pressure-molecular area isotherms, but their structures are completely different on the molecular level, as monitored by GIXD. Complementary data on these two architectures were provided by atomic force microscopy.