Rapid tear screening of diabetic retinopathy by a detachable surface acoustic wave enabled immunosensor.

BACKGROUND: Diabetic retinopathy (DR), a chronic and progressive microvascular complication of diabetes mellitus, substantially threatens vision and is a leading cause of blindness among working-age individuals worldwide. Traditional diagnostic methods, such as ophthalmoscopy and fluorescein angiography are nonquantitative, invasive, and time consuming. Analysis of protein biomarkers in tear fluid offers noninvasive insights into ocular and systemic health, aiding in early DR detection. This study introduces a surface acoustic wave (SAW) microchip that rapidly enhances fluorescence in bead-based immunoassays for the sensitive and noninvasive DR detection from human tear samples. RESULTS: The device facilitated particle mixing for immunoassay formation and particle concentration in the droplet, resulting in an enhanced immunofluorescence signal. This detachable SAW microchip allows the disposal of the cover glass after every use, thereby improving the reusability of the interdigital transducer and minimizing potential cross-contamination. A preliminary clinical test was conducted on a cohort of 10 volunteers, including DR patients and healthy individuals. The results demonstrated strong agreement with ELISA studies, validating the high accuracy rate of the SAW microchip. SIGNIFICANCE: This comprehensive study offers significant insights into the potential application of a novel SAW microchip for the early detection of DR in individuals with diabetes. By utilizing protein biomarkers found in tear fluid, the device facilitates noninvasive, rapid, and sensitive detection, potentially revolutionizing DR diagnostics and improving patient outcomes through timely intervention and management of this vision-threatening condition.

Effect of biologic therapies on quality of life in severe asthma: Findings from the PRISM study.

Background: Anti-type 2 (T2) biologic therapies (biologics) improve exacerbation rates, lung function, and asthma-related quality of life (QoL) in patients with severe T2 asthma. However, studies comparing different biologics are lacking. We evaluated the QoL in patients with severe asthma comprehensively and compare the efficacy of different T2-directed biologics using QoL questionnaires. Methods: We compared the QoL between severe and mild-to-moderate asthma and between severe asthma with and without biologics treatment. Data of mild-to-moderate were extracted from the Cohort for Reality and Evolution of Adult Asthma in Korea, and data of severe asthma were collected from the Precision Medicine Intervention in Severe Asthma. We included 183 patients with severe asthma treated with T2 biologics or conventional therapy between April 2020 and May 2021 and assessed QoL of them using the Questionnaire for Adult Korean Asthmatics (QLQAKA), Severe Asthma Questionnaire (SAQ), and EuroQoL-5Dimensions (EQ-5D) at baseline and 6 months. Results: The EQ-5D index (0.803) of severe asthma was lower than that of other chronic diseases representing a worse QoL. The scores for all questions of QLQAKA, except "cough," were lower (less control) in the severe asthma group than in the mild-to-moderate asthma group at baseline and 6 months (P < 0.05). The total scores and subscores of all domains of the QLQAKA, SAQ, and EQ-5D improved significantly 6 months after biologic therapy but not after conventional therapy. The total QLQAKA, SAQ, and EQ-5D scores improved after 6 months in the anti-IL-5 (P < 0.05) and anti-IL-4/IL-13 (P < 0.05) treatment groups with no significant difference between groups (P > 0.05). Conclusion: QoL was worse in severe asthma than in mild-to-moderate asthma and other chronic diseases. T2 biologics equally improved QoL in patients with severe asthma.

Antibacterial properties of mesoporous silica coated with cerium oxide nanoparticles in dental resin composite.

Cerium oxide nanoparticles are known for their antibacterial effects resulting from Ce3+ to Ce4+ conversion. Application of such cerium oxide nanoparticles in dentistry has been previously considered but limited due to deterioration of mechanical properties. Hence, this study aimed to examine mesoporous silica (MCM-41) coated with cerium oxide nanoparticles and evaluate the antibacterial effects and mechanical properties when applied to dental composite resin. Cerium oxide nanoparticles were coated on the MCM-41 surface using the sol-gel method by adding cerium oxide nanoparticle precursor to the MCM-41 dispersion. The samples were tested for antibacterial activity against Streptococcus mutans via CFU and MTT assays. The mechanical properties were assessed by flexural strength and depth of cure according to ISO 4049. Data were analyzed using a t-test, one-way ANOVA, and Tukey's post-hoc test (p = 0.05). The experimental group showed significantly increased antibacterial properties compared to the control groups (p < 0.005). The flexural strength exhibited a decreasing trend as the amount of cerium oxide nanoparticle-coated MCM-41 increased. However, the flexural strength and depth of cure values of the silane group met the ISO 4049 standard. Antibacterial properties increased with increasing amounts of cerium oxide nanoparticles. Although the mechanical properties decreased, silane treatment overcame this drawback. Hence, the cerium oxide nanoparticles coated on MCM-41 may be used for dental resin composite.

Implementing microfluidic flow device model in utilizing dural substitutes as pulp capping materials for vital pulp therapy.

Vital pulp therapy (VPT) has gained prominence with the increasing trends towards conservative dental treatment with specific indications for preserving tooth vitality by selectively removing the inflamed tissue instead of the entire dental pulp. Although VPT has shown high success rates in long-term follow-up, adverse effects have been reported due to the calcification of tooth canals by mineral trioxide aggregates (MTAs), which are commonly used in VPT. Canal calcification poses challenges for accessing instruments during retreatment procedures. To address this issue, this study evaluated the mechanical properties of dural substitute intended to alleviate intra-pulp pressure caused by inflammation, along with assessing the biological responses of human dental pulp stem cells (hDPSCs) and human umbilical vein endothelial cells (HUVECs), both of which play crucial roles in dental pulp. The study examined the application of dural substitutes as pulp capping materials, replacing MTA. This assessment was conducted using a microfluidic flow device model that replicated the blood flow environment within the dental pulp. Computational fluid dynamics simulations were employed to ensure that the fluid flow velocity within the microfluidic flow device matched the actual blood flow velocity within the dental pulp. Furthermore, the dural substitutes (Biodesign; BD and Neuro-Patch; NP) exhibited resistance to penetration by 2-hydroxypropyl methacrylate (HEMA) released from the upper restorative materials and bonding agents. Finally, while MTA increased the expression of angiogenesis-related and hard tissue-related genes in HUVEC and hDPSCS, respectively, BD and NP did not alter gene expression and preserved the original characteristics of both cell types. Hence, dural substitutes have emerged as promising alternatives for VPT owing to their resistance to HEMA penetration and the maintenance of stemness. Moreover, the microfluidic flow device model closely replicated the cellular responses observed in live pulp chambers, thereby indicating its potential use as anin vivotesting platform.

Laparoscopic versus open pancreatoduodenectomy for periampullary tumors: A randomized clinical trial.

BACKGROUND: There is a lack of robust evidence on the efficacy of laparoscopic pancreatoduodenectomy compared to open surgery. This study was aimed to compare time to functional recovery (FR) between laparoscopic and open pancreatoduodenectomy. MATERIALS AND METHODS: This pragmatic, multicenter, randomized controlled phase 3 trial was conducted in seven tertiary centers. Patients with periampullary tumors were randomized using a block design in a 1:1 ratio and stratified by pancreatic fistula risk. Participants were randomized to undergo open or laparoscopic pancreatoduodenectomy by expert pancreatic surgeons. The primary outcome was the time to FR, defined as the number of days until FR was achieved in all five domains. The secondary endpoints included perioperative and short-term oncological outcomes. RESULTS: Between March 2019 and June 2022, 252 patients were randomly assigned to the laparoscopic (n=125) or open groups (n=127). Primary outcomes were reported in 235 patients. The mean time to FR was shorter in laparoscopic group compared to the open group (7.7 d vs. 9.0 d, P=0.03). Laparoscopic group exhibited a higher cumulative rate of FR compared to the open group (Hazard ratio,1.34; 95% confidence interval, 1.03-1.74; P=0.02). Severe complications, R0 resection, the number of retrieved lymph nodes and short-term survival rates were comparable between the two groups. CONCLUSION: Laparoscopic pancreatoduodenectomy demonstrated modest advantages in FR time over open surgery for selected patients with experienced surgeons.

Incidence of New Asthma in Pregnancy and Associated Risk Factors: A 10-Year Nationwide Population-Based Study.

Pregnancy is a risk factor for asthma exacerbation and may trigger new-onset asthma in nonasthmatics. This study evaluated the epidemiology of newly diagnosed asthma during pregnancy and the associated risk factors among previously nonasthmatic women. Twelve-year medical data from the Korean National Health Insurance claims database (from January 2007 to December 2018) of Korean women who gave birth between January 2012 and December 2015 were collected. Previously nonasthmatic women were defined as those who had not been diagnosed with asthma for at least 4 years before pregnancy. Asthma flare-up was defined as asthma diagnosed three times or more and treated at least once with an oral corticosteroid. A nested case-control study was performed, and then the derived risk factors were applied to whole study population. Among the nonasthmatic women, 7.5% experienced asthma during pregnancy including episodes requiring hospitalization and 18.6% of them visited emergency room. Older age, primiparity, multi-fetal pregnancy, and rhinitis were identified as the risk factors. Among the entire study population, moderate to severe rhinitis was a significant risk factor across all age groups, while primiparity with multi-fetal pregnancy was one for older pregnant women; 22.7% in those ≥ 34 years old experienced asthma flare-ups compared to only 3.5% in the < 34 age group. A substantial portion of pregnant women with no history of asthma experienced an asthma flare-up during pregnancy. Multi-fetal pregnancy as primiparity at a later age and moderate to severe rhinitis are risk factors for the new development of asthma.

Drosophila HCN mediates gustatory homeostasis by preserving sensillar transepithelial potential in sweet environments.

Establishing transepithelial ion disparities is crucial for sensory functions in animals. In insect sensory organs called sensilla, a transepithelial potential, known as the sensillum potential (SP), arises through active ion transport across accessory cells, sensitizing receptor neurons such as mechanoreceptors and chemoreceptors. Because multiple receptor neurons are often co-housed in a sensillum and share SP, niche-prevalent overstimulation of single sensory neurons can compromise neighboring receptors by depleting SP. However, how such potential depletion is prevented to maintain sensory homeostasis remains unknown. Here, we find that the Ih-encoded hyperpolarization-activated cyclic nucleotide-gated (HCN) channel bolsters the activity of bitter-sensing gustatory receptor neurons (bGRNs), albeit acting in sweet-sensing GRNs (sGRNs). For this task, HCN maintains SP despite prolonged sGRN stimulation induced by the diet mimicking their sweet feeding niche, such as overripe fruit. We present evidence that Ih-dependent demarcation of sGRN excitability is implemented to throttle SP consumption, which may have facilitated adaptation to a sweetness-dominated environment. Thus, HCN expressed in sGRNs serves as a key component of a simple yet versatile peripheral coding that regulates bitterness for optimal food intake in two contrasting ways: sweet-resilient preservation of bitter aversion and the previously reported sweet-dependent suppression of bitter taste.

Enhancing biofilm resistance and preserving optical translucency of 3D printed clear aligners through carboxybetaine-copolymer surface treatment.

OBJECTIVES: This study aimed to use a carboxybetaine methacrylate (CBMA) copolymer solution to surface treat 3D printed clear aligners at different fabrication stages, to impart antifouling properties, and assess the surface treatment at various fabrication stages' impact on physico-mechanical characteristics. METHODS: Surface treatments using a blend of 2-hydroxyethyl methacrylate (HEMA) and CBMA, termed CCS, were performed at various stages of 3D printed clear aligner fabrication. Experimental groups, CB1, CB2, and CB3, were determined by the stage of surface treatment during post-processing. CB1, CB2, and CB3 received treatment before post-curing, after post-curing, and after post-processing, respectively. Untreated samples served as controls. Physical and mechanical properties were assessed through tensile testing, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and UV-Vis spectroscopy. The surface was further characterized through scanning electron microscopy and contact angle measurements. The cytotoxicity was assessed with 7-day elution and agar diffusion assays. Lastly, bacterial biofilm resistance was evaluated using confocal laser scanning microscopy. Crystal violet assay was performed using Streptococcus mutans. RESULTS: Surface treatment during CB1 stage exerted the most significantly unfavorable influence on properties of the 3D printed aligner resin. CB2 samples showed the maximum preservation of translucency even after 7-day aging. CB2 and CB3 phases showed enhanced hydrophilicity of sample surfaces with reduced adhesion of multispecies biofilm and S. mutans. SIGNIFICANCE: Application of CCS surface treatment immediately after post-curing (CB2) can enhance the biofilm resistance of 3D printed clear aligners while maintaining high fidelity to optical translucency and constituent mechanical properties.

Antibacterial efficacy and osteogenic potential of mineral trioxide aggregate-based retrograde filling material incorporated with silver nanoparticle and calcium fluoride.

Background/purpose: The retrograde filling material, particularly mineral trioxide aggregate (MTA) employed in apicoectomy, should possess high antibacterial efficacy and osteogenic potential. We evaluated the antibacterial efficacy, biocompatibility, and osteogenic potential following the addition of silver nanoparticles (AgNPs) and calcium fluoride (CaF2) in retrograde filling material of MTA. Materials and methods: MTA was mixed with four different solvents. Group 1 (G1): distilled water, Group 2 (G2): 50 ppm AgNPs, Group 3 (G3): 1 wt% CaF2, and Group 4 (G4): 50 ppm AgNPs and 1 wt% CaF2. The pH variation of each group was monitored, while the surface roughness was measured. The antibacterial efficacy against Enterococcus faecalis (E. faecalis) and the viability of murine pre-osteoblast (MC3T3) were evaluated for each group using colorimetric assays. The gene expression levels of osteogenic potential marker (OCN, ALPL, and RUNX2) in MC3T3 cells for each group were quantified using real-time-qPCR. Statistical analysis was performed at α = 0.05 level of significance. Results: When comparing the levels of antibacterial efficacy, the order of effectiveness was G4>G2>G3>G1 (P < 0.05). In the cell viability test, owing to MTA-eluted growth medium having a positive effect on MC3T3 cell proliferation, G1-4 exhibited a statistically increased cell viability compared to the control (P < 0.05). However, G2-4 did not result in a statistically significant difference when compared to G1 (P < 0.05). Moreover, G4 exhibited the highest gene expression among the four groups (P < 0.05). Conclusion: The addition of AgNPs and CaF2 to MTA could be a promising option for use as a new retrograde filling material.

Mineral trioxide aggregate in membrane form as a barrier membrane in guided bone regeneration.

Background/purpose: In the field of conservative dentistry and endodontics, mineral trioxide aggregate (MTA), commonly used, possesses advantages such as biocompatibility, antimicrobial properties and osteogenic potential. This study investigated the feasibility of utilizing membrane form mineral trioxide aggregate (MTA) as a barrier membrane in guided bone regeneration (GBR) procedures. Materials and methods: Membranes were electrospun from three different formulations: 15 w/v% Polycaprolactone (PCL), 13 w/v% PCL + 2 w/v% MTA (2MTA), and 11 w/v% PCL + 4 w/v% MTA (4MTA). Physicochemical and mechanical properties of the electrospun membrane were compared, encompassing parameters such as surface morphology, fiber diameter distribution, chemical composition, phase identification, tensile stress, pH variation, and water contact angle. Moreover, the antimicrobial properties against of the electrospun membranes were assessed through direct exposure to streptococcus aureus (S. aureus) and candida albicans (C. albicans). Additionally, on the 7th day, biocompatibility and cell attachment were investigated with respect to L929 (fibroblast) and MC3T3 (pre-osteoblast) cells. Inhibition of L929 cell infiltration and the expression of osteogenic related genes including osteocalcin (OCN), alkaline phosphatase (ALP), and runt related transcription factor 2 (RUNX2) in MC3T3 cells on 7th and 14th days were also investigated. Results: PCL, 2MTA, and 4MTA exhibited no statistically differences in fiber diameter distribution and tensile stress. However, as the MTA content increased, wettability and pH also increased. Due to the elevated pH, 4MTA demonstrated the lowest viability S.aureus and C.albicans. All membranes were highly biocompatibility and promoted cell attachment, while effectively preventing L929 cell infiltration. Lastly 4MTA showed increase in OCN, ALP, and RUNX2 expression on both 7th and 14th day. Conclusion: The membrane form MTA possessed characteristics essential for a novel barrier membrane.

SOD1 inhibition enhances sorafenib efficacy in HBV-related hepatocellular carcinoma by modulating PI3K/Akt/mTOR pathway and ROS-mediated cell death.

Hepatitis B Virus (HBV) infection significantly elevates the risk of hepatocellular carcinoma (HCC), with the HBV X protein (HBx) playing a crucial role in cancer progression. Sorafenib, the primary therapy for advanced HCC, shows limited effectiveness in HBV-infected patients due to HBx-related resistance. Numerous studies have explored combination therapies to overcome this resistance. Sodium diethyldithiocarbamate (DDC), known for its anticancer effects and its inhibition of superoxide dismutase 1 (SOD1), is hypothesized to counteract sorafenib (SF) resistance in HBV-positive HCCs. Our research demonstrates that combining DDC with SF significantly reduces HBx and SOD1 expressions in HBV-positive HCC cells and human tissues. This combination therapy disrupts the PI3K/Akt/mTOR signalling pathway and promotes apoptosis by increasing reactive oxygen species (ROS) levels. These cellular changes lead to reduced tumour viability and enhanced sensitivity to SF, as evidenced by the synergistic suppression of tumour growth in xenograft models. Additionally, DDC-mediated suppression of SOD1 further enhances SF sensitivity in HBV-positive HCC cells and xenografted animals, thereby inhibiting cancer progression more effectively. These findings suggest that the DDC-SF combination could serve as a promising strategy for overcoming SF resistance in HBV-related HCC, potentially optimizing therapy outcomes.

Cerium doping of 45S5 bioactive glass improves redox potential and cellular bioactivity.

45S5 Bioglass (BG) is composed of a glass network with silicate based on the component and can be doped with various therapeutic ions for the enhancement of hard tissue therapy. Nanoceria (CeO2) has been shown to indicate redox reaction and enhance the biological response. However, few studies focus on the proportion of CeO2-doped and its effect on the cellular bioactivity of CeO2-doped BG (CBG). In this study, we synthesized the CBG series with increasing amounts of doping CeO2 ranging (1 to 12) wt.%. The synthesized CBG series examined the characterization, mineralization capacity, and cellular activity against BG. Our results showed that the CBG series exhibited a glass structure and indicated the redox states between Ce3+ and Ce4+, thus they showed the antioxidant activity by characterization of Ce. The CBG series had a stable glass network structure similar to BG, which showed the preservation of bioactivity by exhibiting mineralization on the surface. In terms of biological response, although the CBG series showed the proliferative activity of pre-osteoblastic cells similar to BG, the CBG series augmented not only the alkaline phosphatase activity but also the osteogenic marker in the mRNA level. As stimulated the osteogenic activity, the CBG series improved the biomineralization. In conclusion, the CBG series might have a potential application for hard tissue therapeutic purposes.

Zinc Action in Vascular Calcification.

Although zinc's involvement in bone calcification is well-established, its role in vascular calcification, characterized by abnormal calcium and phosphorus deposition in soft tissues and a key aspect of various vascular diseases, including atherosclerosis, remains unclear. This review focuses on zinc's action in vascular smooth muscle cell (VSMC) calcification, including the vascular calcification mechanism. Accumulated research has indicated that zinc deficiency induces calcification in VSMCs and the aorta, primarily through apoptosis accompanied by a downregulation of smooth muscle cell markers. Moreover, zinc deficiency-induced vascular calcification operates independently of the action of alkaline phosphatase (ALP) activity, typically associated with osteogenic processes, but is partly regulated via inorganic phosphate transporter-1 (Pit-1). To date, research has shown that zinc regulates vascular calcification through a mechanism distinct from that of osteogenic calcification, providing insight into its dual effects on physiological and pathological calcification and thereby explaining the "zinc paradox," wherein zinc simultaneously increases osteoblastic calcification and decreases VSMC calcification.

Molecular and cellular basis of sodium sensing in Drosophila labellum.

Appropriate ingestion of salt is essential for physiological processes such as ionic homeostasis and neuronal activity. Generally, low concentrations of salt elicit attraction, while high concentrations elicit aversive responses. Here, we observed that sugar neurons in the L sensilla of the Drosophila labellum cf. responses to NaCl, while sugar neurons in the S-c sensilla do not respond to NaCl, suggesting that gustatory receptor neurons involved in NaCl sensing may employ diverse molecular mechanisms. Through an RNAi screen of the entire Ir and ppk gene families and molecular genetic approaches, we identified IR76b, IR25a, and IR56b as necessary components for NaCl sensing in the Drosophila labellum. Co-expression of these three IRs in heterologous systems such as S2 cells or Xenopus oocytes resulted in a current in response to sodium stimulation, suggesting formation of a sodium-sensing complex. Our results should provide insights for research on the diverse combinations constituting salt receptor complexes.

Evaluation of the effects of temperature and centrifugation time on elimination of uncured resin from 3D-printed dental aligners.

The study investigated the effects of temperature and centrifugation time on the efficacy of removing uncured resin from 3D-printed clear aligners. Using a photo-polymerizable polyurethane resin (Tera Harz TC-85, Graphy Inc., Seoul, Korea), aligners were printed and subjected to cleaning processes using isopropyl alcohol (IPA) or centrifugation (g-force 27.95g) at room temperature (RT, 23 °C) and high temperature (HT, 55 °C) for 2, 4, and 6 min. The control group received no treatment (NT). Cleaning efficiency was assessed through rheological analysis, weight measurement, transparency evaluation, SEM imaging, 3D geometry evaluation, stress relaxation, and cell viability tests. Results showed increased temperature and longer centrifugation times significantly reduced aligner viscosity, weight (P < 0.05), and transmittance. IPA-cleaned aligners exhibited significantly lower transparency and rougher surfaces in SEM images. All groups met ISO biocompatibility standards in cytotoxicity tests. The NT group had higher root mean square (RMS) values, indicating greater deviation from the original design. Stress relaxation tests revealed over 95% recovery in all groups after 60 min. The findings suggest that a 2-min HT centrifugation process effectively removes uncured resin without significantly impacting the aligners' physical and optical properties, making it a clinically viable option.

An in vitro evaluation of bond strength and failure behavior between 3D-printed cobalt-chromium alloy and different types of denture base resins.

OBJECTIVES: This study aimed to evaluate the shear bond strength and failure behavior between cobalt-chromium (Co-Cr) alloy and different types of denture base resins (DBRs) over time. METHODS: Seventy-two disk-shaped specimens (8 mm in diameter and 2 mm in thickness) were manufactured using a selective laser melting technology-based metal 3D printer. Three types of DBRs were used: heat-cure (HEA group), cold-cure (COL group), and 3D-printable (TDP group) DBRs (n = 12 per group). Each DBR specimen was fabricated as a 5 mm × 5 mm × 5 mm cube model. The specimens of the TDP group were manufactured using a digital light processing technology-based 3D printer. Half of the DBRs were stored in distilled water at 37 °C for 24 h, whereas the remaining half underwent thermocycling for 10,000 cycles. Shear bond strength was measured using a universal testing machine; failure modes were observed, and metal surfaces were evaluated using energy dispersive spectrometry. RESULTS: The shear bond strength did not differ between the DBR types within the non-thermocycled groups. Contrarily, the TDP group exhibited inferior strength compared to the HEA group (P = 0.008) after thermocycling. All three types of DBRs exhibited a significant decrease in the shear bond strength and an increased tendency toward adhesive failure after thermocycling. CONCLUSIONS: The bond strength between 3D-printable DBRs and Co-Cr alloy was comparable to that of heat-and cold-cure DBRs before thermocycling. However, it exhibited a considerable weakening in comparison to heat-cure DBRs after simulated short-term use. CLINICAL SIGNIFICANCE: The application of 3D-printable DBR in metal framework-incorporated removable partial dentures may be feasible during the early phase of the treatment. However, its application is currently limited because the bond strength between the 3D-printable DBR and metal may weaken after short-term use. Further studies on methods to increase the bond strength between these heterogeneous materials are required.

The optical property measuring methods for resin composite using multiple spectrophotometers.

This study aimed to propose the measurement methods for resin composite translucency using four shades of resin composite and four spectrophotometers. Four methods were used for measuring translucency: (A) color measurement using reflectance mode, (B) visible light spectrum measurement using reflectance mode, (C) color measurement using transmittance mode, (D) visible light spectrum measurement using transmittance mode. Although there was a significant difference among the results of the translucency measuring methods, the same tendency was observed for translucency parameters obtained using each spectrophotometer. Therefore, the four methods can potentially be used as translucency measuring methods for resin composite.

Hydrated Calcium Silicate in Resin Composites for Prevention of Secondary Caries.

INTRODUCTION AND AIMS: The gaps at the margins of restorative composite resin can increase as the carious process occurs underneath the materials, causing further demineralization along the tooth cavity wall. The aim of this study was to evaluate the effects of restorative resin composite containing hydrated calcium silicate (hCS) filler on enamel protection against demineralization by simulating microleakage between the test material and teeth in a cariogenic environment. METHODS: The experimental resin composites were composed of 70 wt.% filler, which was mixed with a glass filler and hCS in a weight ratio of 70.0% glass (hCS 0), 17.5% hCS + 52.5% glass (hCS 17.5), 35.0% hCS + 35.0% glass (hCS 35.0), and 52.5% hCS + 17.5% glass (hCS 52.5). A light-cured experimental resin composite disk was positioned over a polished bovine enamel disk, separated by a 30-µm gap, and immersed in artificial saliva with pH 4.0 for 15, 30, and 60 days. After the immersion period, the enamel disk was separated from the resin composite disk and evaluated using a microhardness tester, atomic force microscopy, and polarized light microscopy. The opposing sides of the enamel and resin composite disks were observed using scanning electron microscopy/energy dispersive X-ray spectrometry. RESULTS: The enamel surface showed a significant increase in microhardness, decreased roughness, and remineralization layer as the proportion of hCS increased (P < .05). In the scanning electron microscopy image, the enamel surface with hCS 35.0 and 52.5 after all experimental immersion periods, showed a pattern similar to that of a sound tooth. CONCLUSIONS: The results demonstrated that increasing the hCS filler level of restorative resin composites significantly decreased enamel demineralization. CLINICAL RELEVANCE: Hydrated calcium silicate laced restorative resin composites may be a promising dental biomaterial for protecting teeth against demineralization and preventing secondary caries around restorations.

Sequential Assessment of External Nasal Deviation Angle Changes in Patients With a Deviated Nose Who Underwent Bilateral Osteotomy.

OBJECTIVE: A deviated nose is traditionally classified as bony, cartilaginous, or combined deviation. Osteotomy is commonly used to correct bony deviation, and accurate surgical techniques and postoperative patient management are important for favorable outcomes. The authors investigated the change in the external nasal deviation angle over time using sequential clinical photographs to identify the optimal postoperative follow-up duration. METHODS: Medical records and sequential standardized clinical photographs of 22 patients who underwent bilateral medial and lateral osteotomies without dorsal augmentation from January 1, 2014 to May 31, 2021, were retrospectively reviewed. Clinical photographs were classified into 4 periods: "a" preoperative, "b" postoperative day (POD) ≤3 weeks, "c" POD ≤9 weeks, and "d" POD >9 weeks. The angle of deviation (AoD) was measured in both frontal and chin-on-chest views for each period. Differences in AoD between temporally adjacent periods were analyzed. RESULTS: Nineteen men and 3 women (mean age: 28.8 y) were included. Thirteen patients showed rightward deviation, whereas 9 showed leftward deviation. Eleven patients underwent surgery through an endonasal approach, whereas the other 11 underwent surgery through an external approach. In the frontal view, AoD differences (mean ± SD) between periods "a" and "b," "b" and "c," and "c" and "d" were 5.79 ± 3.36 degrees (P < 0.001), 1.44 ± 1.14 degrees (P < 0.001), and 1.07 ± 1.24 degrees (P < 0.05), respectively. In the chin-on-chest view, the values were 5.17 ± 2.69 degrees (P < 0.001), 2.06 ± 2.63 degrees (P < 0.001), and 1.46 ± 1.31 degrees (P < 0.001), respectively. No statistically significant difference in AoD differences was observed between the two approaches. CONCLUSIONS: Angle of deviation can change even 9 weeks after bilateral osteotomy. Thus, long-term follow-up using sequential clinical photographs is mandatory. If needed, close follow-up with early postoperative interventions may be required. The chin-on-chest view showed better sensitivity for assessing AoD than the frontal view.

Real-World Effectiveness of Biologics in Patients With Severe Asthma: Analysis of the KoSAR.

PURPOSE: Severe asthma is associated with high morbidity and healthcare utilization; however, treatment options for these patients are limited. This study aimed to determine the therapeutic effects of biologics in clinical practice. METHODS: This multicenter, retrospective cohort study included 136 patients who received biologics for at least 4 months between September 2017 and July 2022 at 25 medical centers affiliated with the Korean Severe Asthma Registry (KoSAR). The study evaluated the treatment effects, including acute exacerbation rates, maintenance of oral corticosteroid dosages, lung function, quality of life, blood eosinophil count, and fractional exhaled nitric oxide (FeNO) levels, by comparing measurements before and after 4 months of biologic treatment. Responses for each medication was evaluated based on the Global Evaluation of Treatment Effectiveness score, and any adverse reactions were summarized. RESULTS: With the administration of biologics over the course of 4 months, there was a reduction in asthma acute exacerbations, a significant improvement in lung function, and a significant decrease in daily maintenance dose of oral steroid. Blood eosinophil counts decreased in the mepolizumab and reslizumab groups, while FeNO levels decreased only in the dupilumab group. The Asthma Control Test, Quality of Life Questionnaire for Adult Korean Asthmatics, and the EuroQol-visual analogue scale scores showed a significant improvement. Most patients (80.15%) responded to the biologic treatment. Meanwhile, non-responders often had chronic rhinosinusitis as a comorbidity, exhibited lower lung function, and required higher doses of oral steroids. No severe adverse events were reported. CONCLUSIONS: Biologics are highly effective in Korean patients with Type 2 severe asthma, significantly reducing acute exacerbation rates and doses of oral corticosteroids, while also improving lung function. Therefore, it seems beneficial to administer biologics without any restrictions to patients exhibiting Type 2 severe asthma.