Potential-Dependent Passivation of Zinc Metal in a Sulfate-Based Aqueous Electrolyte.

Owing to its abundance, high theoretical capacity, and low electrode potential, zinc is one of the most important metallic anodes for primary and secondary batteries such as alkaline and zinc-air batteries. In the operation of zinc-based batteries, passivation of the anode surface plays an essential role because the electrode potential of zinc is slightly below that of the hydrogen evolution reaction. Therefore, it is important to scrutinize the nature of the passivation film to achieve anticorrosion inside batteries. Herein, the potential-dependent formation and removal of the passivation film during the deposition and dissolution of zinc metal in aqueous electrolytes are detected via electrochemical quartz crystal microbalance analysis. Film formation was not noticeable in hydroxide-based electrolytes; however, sulfate-based electrolytes induced potential-dependent formation and removal of the passivation film, enabling a superior coulombic efficiency of 99.37% and significantly reducing the rate of corrosion of the zinc-metal anodes. These observations provide insights into the development of advanced electrolytes for safe and stable energy-storage devices based on zinc-metal anodes.

Method development and mechanistic study on direct pulsed laser irradiation process for highly effective dechlorination of persistent organic pollutants.

Chlorine-based compounds are typical persistent organic pollutants (POPs) that are widely generated in industrial production. This paper reports an effective and rapid pulsed laser irradiation technique for the dechlorination of hexachlorobenzene (HCB), a model pollutant, without additional catalysts or supports. The effects of the laser parameters, including the laser wavelength and power, on the dechlorination efficiency, were also investigated. The optimized results showed that a lower laser wavelength of 266 nm with 10 mJ/pulse power exhibited the highest dechlorination efficiency with 95% within 15 min. In addition, the laser beam effect was examined by designing the direct-pulsed laser single and multipath irradiation system. The results showed that improving the laser beam profile resulted in more than 95% dechlorination efficiency within 5 min. Thus, the dechlorination reaction proceeded much faster as the surface area that the laser beam came in contact with increased due to the multipath system than the single pathway. Gas chromatography identified benzene as the final product of HCB with pentachlorobenzene (PCB), tetrachlorobenzene (TeCB), trichlorobenzene (TCB), dichlorobenzene (DCB), and chlorobenzene (CB) as intermediate products. The mechanism of HCB dechlorination was explained by a comparison of theoretical calculations with the experimental results. The present study reports an advanced technique for the complete dechlorination of chlorobenzenes, which holds great application potential in environmental remediation.

Concurrent occurrence of electrochemical dissolution/deposition of cobalt-calcium phosphate composite.

Amorphous cobalt-calcium phosphate composite (CCPC) films are electrochemically prepared on various electrodes by utilizing the solid phase of hydroxyapatite as a phosphate source. The CCPC film formation is surface process in which the dissolution of hydroxyapatite and the deposition of CCPC film concurrently occur on the electrode surface without the mass transfer of phosphate ions into the bulk solution. Elemental, crystallographic, and morphological analyses (EDX, ICP-AES, XPS, and XRD) indicate that the CCPC is composed of amorphous cobalt oxide with calcium and phosphate. The film exhibits durable oxygen evolution reaction (OER) catalytic properties under neutral and basic aqueous condition. Compared to using solution phase of phosphate source, our preparation method utilizing solid hydroxyapatite has advantage of preventing unnecessary chemical reaction between phosphate and other chemical species in bulk solution.

Cost-Effective Synthesis of Efficient CoWO4/Ni Nanocomposite Electrode Material for Supercapacitor Applications.

In the present study, the synthesis of CoWO4 (CWO)-Ni nanocomposites was conducted using a wet chemical method. The crystalline phases and morphologies of the Ni nanoparticles, CWO, and CWO-Ni composites were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDAX). The electrochemical properties of CWO and CWO-Ni composite electrode materials were assessed by cyclic voltammetry (CV), and galvanostatic charge-discharge (GCD) tests using KOH as a supporting electrolyte. Among the CWO-Ni composites containing different amounts of Ni1, Ni2, and Ni3, CWO-Ni3 exhibited the highest specific capacitance of 271 F g-1 at 1 A g-1, which was greater than that of bare CWO (128 F g-1). Moreover, the CWO-Ni3 composite electrode material displayed excellent reversible cyclic stability and maintained 86.4% of its initial capacitance after 1500 discharge cycles. The results obtained herein demonstrate that the prepared CWO-Ni3 nanocomposite is a promising electrode candidate for supercapacitor applications.

A Chronocoulometric Method to Measure the Corrosion Rate on Zinc Metal Electrodes.

Research studies on zinc metal-based batteries have attracted considerable attention as a candidate for post-lithium-ion batteries. Zinc is one of the few metal anodes that is compatible with aqueous and non-aqueous electrolytes, providing a large theoretical capacity of 820 mAh g-1. However, in aqueous electrolytes, the zinc metal anode suffers from hydrogen evolution reaction (HER), by which zinc is irreversibly consumed or corroded continually. Exact estimation of the corrosion rate has been a challenge in the development of Zn-based batteries. Measurement of the corrosion rate by conventional Tafel analysis meets serious problems because the cathodic current reflects deposition of Zn metal as well as HER, inhibiting exact measurement of the corrosion rate. Herein, we developed a chronocoulometric "deposition-rest-dissolution" method to quantify the corrosion rate without such interference from the deposition of Zn. The method was successfully applied to the quantification of the rate of chemical corrosion of Zn in aqueous electrolytes with various pH and concentration values. The "deposition-rest-dissolution" method and electrochemical impedance spectroscopy confirmed that saturated ZnSO4 (ca. 3.2 M) + 0.075 M Li2SO4 delivers the lowest corrosion rate compared to the other electrolytes, probably because the activity of water in such a concentrated electrolyte is low enough to suppress the kinetics of HER. Moreover, this method can be generally applied to determine the rate of chemical corrosion on various metal electrodes.

Ultraviolet Patterned Calixarene-Derived Supramolecular Gels and Films with Spatially Resolved Mechanical and Fluorescent Properties.

Supramolecular assemblies have in the past been considered mechanically weak and in most cases unable to withstand their own weight. Calixarene-derived networks can, however, provide robust supramolecular gels. Incorporating a photoreactive stilbene moiety, we show that the aggregation state of the material can be tuned by heating and UV exposure in order to control the mechanical as well as the fluorescent properties. Regulating the extent of heating to control the proportion of H-aggregates and J-aggregates and further cross-linking of H-aggregates by control over UV exposure allows for adjustable photopatterning of the fluorescence as well as the material stiffness in the range from ∼100 to 450 kPa. We expect this straightforward supramolecular system will be suitable for advanced prototyping in applications where modulus and shape are important design criteria.

Fabrication of enzyme-based coatings on intact multi-walled carbon nanotubes as highly effective electrodes in biofuel cells.

CNTs need to be dispersed in aqueous solution for their successful use, and most methods to disperse CNTs rely on tedious and time-consuming acid-based oxidation. Here, we report the simple dispersion of intact multi-walled carbon nanotubes (CNTs) by adding them directly into an aqueous solution of glucose oxidase (GOx), resulting in simultaneous CNT dispersion and facile enzyme immobilization through sequential enzyme adsorption, precipitation, and crosslinking (EAPC). The EAPC achieved high enzyme loading and stability because of crosslinked enzyme coatings on intact CNTs, while obviating the chemical pretreatment that can seriously damage the electron conductivity of CNTs. EAPC-driven GOx activity was 4.5- and 11-times higher than those of covalently-attached GOx (CA) on acid-treated CNTs and simply-adsorbed GOx (ADS) on intact CNTs, respectively. EAPC showed no decrease of GOx activity for 270 days. EAPC was employed to prepare the enzyme anodes for biofuel cells, and the EAPC anode produced 7.5-times higher power output than the CA anode. Even with a higher amount of bound non-conductive enzymes, the EAPC anode showed 1.7-fold higher electron transfer rate than the CA anode. The EAPC on intact CNTs can improve enzyme loading and stability with key routes of improved electron transfer in various biosensing and bioelectronics devices.

Low Serum Vitamin D Levels May Contribute to Gastric Dysmotility in de novo Parkinson's Disease.

BACKGROUND AND OBJECTIVES: Gastrointestinal dysfunction is a common non motor symptom in Parkinson's disease (PD). However, the potential association between vitamin D and gastroparesis in PD has not been previously investigated. The aim of this study was to compare vitamin D levels between drug-naive de novo PD patients with normal gastric emptying and those with delayed gastric emptying. METHODS: Fifty-one patients with drug-naive de novo PD and 20 age-matched healthy controls were enrolled in this study. Gastric emptying time (GET) was assessed by scintigraphy, and gastric emptying half-time (T1/2) was determined. The PD patients were divided into a delayed-GET group and a normal-GET group. RESULTS: The serum 25-hydroxyvitamin D3 levels were decreased in the delayed-GET group compared with the normal-GET and control groups (11.59 ± 4.90 vs. 19.43 ± 6.91 and 32.69 ± 4.93, respectively, p < 0.01). In the multivariate model, the serum 25-hydroxyvitamin D3 level was independently associated with delayed gastric emptying in PD patients. CONCLUSIONS: Vitamin D status may be an independent factor for gastric dysmotility in PD. Although the underlying mechanism remains to be characterized, vitamin D status may play a role in the pathogenesis of delayed gastric emptying in drug-naive PD.

Highly selective fluorescence imaging of zinc distribution in HeLa cells and Arabidopsis using a naphthalene-based fluorescent probe.

2-(N,N-Dimethylamino)naphthalene-based probe 1 was found to exhibit a dramatic enhancement in fluorescence upon addition of Zn(2+), but not with any other metal ions. Probe 1 as a chemoprobe enabled high-resolution fluorescence imaging of zinc ions in HeLa cells and Arabidopsis.

Efficacy and safety of deferasirox estimated by serum ferritin and labile plasma iron levels in patients with aplastic anemia, myelodysplastic syndrome, or acute myeloid leukemia with transfusional iron overload.

BACKGROUND: Patients receiving red blood cell (RBC) transfusions are at risk of iron overload, which can cause significant organ damage and is an important cause of morbidity and mortality. STUDY DESIGN AND METHODS: This study was an open-label, single-arm, prospective clinical study to evaluate the efficacy and safety of deferasirox (DFX) in patients with aplastic anemia (AA), myelodysplastic syndrome (MDS), or acute myeloid leukemia (AML). Patients with serum ferritin levels of at least 1000 ng/mL and ongoing transfusion requirements were enrolled. DFX was administered for up to 1 year. A total of 100 patients were enrolled. RESULTS: Serum ferritin levels decreased significantly following treatment (from 2000 to 1650 ng/mL, p = 0.004). The median absolute reduction in serum ferritin levels was -65 ng/mL in AA (p = 0.037), -647 ng/mL in lower-risk MDS (MDS-LR; p = 0.007), and -552 ng/mL in higher-risk MDS (MDS-HR)/AML (p = 0.482). Mean labile plasma iron (LPI) levels decreased from 0.24 µmol/L at baseline to 0.03 µmol/L at 1 year in all patients (p = 0.036). The mean LPI reduction in each group was -0.17 µmol/L in AA, -0.21 µmol/L in MDS-LR, and -0.30 µmol/L in MDS-HR/AML. Gastrointestinal disorders were commonly observed among groups (16.0%). DFX was temporarily skipped for adverse events in seven patients (7.0%) and was permanently discontinued in 11 patients (11.0%). CONCLUSION: DFX reduced serum ferritin and LPI levels in patients with transfusional iron overload. Despite the relatively high percentage of gastrointestinal side effects, DFX was tolerable in all subgroups.

A turn-on fluorogenic Zn(II) chemoprobe based on a terpyridine derivative with aggregation-induced emission (AIE) effects through nanofiber aggregation into spherical aggregates.

The self-assembly of a terpyridine-based ligand in a DMSO/water solvent mixture (1 : 99 v/v) with a high content of water formed a nanofibrillar structure and showed a non-emissive process. On the other hand, the self-assembly of the terpyridine-based ligand exhibited strong emission in the presence of Zn(2+) due to the formation of coordination bonds between the terpyridine moieties and the Zn(2+) by the aggregation-induced emission effect. The morphology of this aggregate represented a spherical structure.

Reversibly tunable helix inversion in supramolecular gels trigged by Co(2+).

Terpyridine-based ligands form octahedral complexes with Co(2+) at low cation concentrations to form helical assemblies which provide a supramolecular gel framework. Increasing the Co(2+) concentration above 0.6 equiv. reveals a second, co-existing square pyramidal complex derived assembly, having a distinct helicity. While this geometry dominates at 1 equiv. of Co(2+), we find this unique form of helical inversion to be fully reversible and controllable.

The efficacy and perioperative complications associated with lumbar spinal fusion surgery, focusing on geriatric patients in the republic of Korea.

OBJECTIVE: The purpose of this study was to examine the efficacy and perioperative complications associated with lumbar spinal fusion surgery, focusing on geriatric patients in the Republic of Korea. METHODS: We retrospectively investigated 485 patients with degenerative spinal diseases who had lumbar spinal fusion surgeries between March 2006 and December 2010 at our institution. Age, sex, comorbidity, American Society of Anesthesiologists (ASA) class, fusion segments, perioperative complications, and outcomes were analyzed in this study. Risk factors for complications and their association with age were analyzed. RESULTS: In this study, 81 patients presented complications (16.7%). The rate of perioperative complications was significantly higher in patients 70 years or older than in other age groups (univariate analysis, p=0.015; multivariate analysis, p=0.024). The perioperative complications were not significantly associated with the other factors tested (sex, comorbidity, ASA class, and fusion segments). Post-operative outcomes of lumbar spinal fusion surgeries for the patients were determined on the basis of MacNab's criteria (average follow up period : 19.7 months), and 412 patients (85.0%) were classified as having "excellent" or "good" results. CONCLUSION: Increasing age was an important risk factor for perioperative complications in patients undergoing lumbar spinal fusion surgery, whereas other factors were not significant. However, patients' satisfaction or return to daily activities when compared with younger patients did not show much difference. We recommend good clinical judgment as well as careful selection of geriatric patients for lumbar spinal fusion surgery.

Giant cystic cerebral cavernous malformation with multiple calcification - case report.

Cerebral cavernous malformation with giant cysts is rare and literature descriptions of its clinical features are few. In this case study, the authors describe the clinical symptoms, radiological findings, and pathological diagnosis of cerebral cavernous malformations with giant cysts, reviewing the relevant literature to clearly differentiate this from other disease entities. The authors present a case of a 19-year-old male with a giant cystic cavernous malformation, who was referred to the division of neurosurgery due to right sided motor weakness (grade II/II). Imaging revealed a large homogenous cystic mass, 7.2×4.6×6 cm in size, in the left fronto-parietal lobe and basal ganglia. The mass had an intra-cystic lesion, abutting the basal portion of the mass. The initial diagnosis considered this mass a glioma or infection. A left frontal craniotomy was performed, followed by a transcortical approach to resect the mass. Total removal was accomplished without post-operative complications. An open biopsy and a histopathological exam diagnosed the mass as a giant cystic cavernous malformation. Imaging appearances of giant cavernous malformations may vary. The clinical features, radiological features, and management of giant cavernous malformations are described based on pertinent literature review.

Clinical Outcome of Rituximab-Based Therapy (RCHOP) in Diffuse Large B-Cell Lymphoma Patients with Bone Marrow Involvement.

PURPOSE: We investigated the clinical outcome of bone marrow (BM) involvement in patients with diffuse large B-cell lymphoma (DLBCL) who received rituximab-based therapy. MATERIALS AND METHODS: A total of 567 consecutive patients with newly diagnosed DLBCL treated with rituximab-CHOP (RCHOP) between November 2001 and March 2010 were included in the current study. All of the patients underwent a BM study at the initial staging and the clinical characteristics and prognosis of these patients with or without BM involvement were analyzed retrospectively. RESULTS: The total cohort included 567 patients. The overall incidence of BM involvement was 8.5%. With a median follow-up duration of 33.2 months (range, 0.1 to 80.7 months) for patients who were alive at the last follow-up, the five-year overall survival (OS) and event-free survival (EFS) rate in patients without BM involvement (76.3% and 67.5%, p<0.001) was statistically higher than that in patients with BM involvement (44.3% and 40.1%, p<0.001). In multivariate analysis, among total patients, BM involvement showed a significant association with OS and EFS. In univariate and multivariate analyses, even among stage IV patients, a significant association with worse EFS was observed in the BM involvement group. CONCLUSION: BM involvement at diagnosis affected the survival of patients with DLBCL who received RCHOP. Although use of RCHOP can result in significant improvement of the therapeutic effect of DLBCL, BM involvement is still a negative prognostic factor of DLBCL patients in the era of rituximab.

Systematic analysis of palladium-graphene nanocomposites and their catalytic applications in Sonogashira reaction.

Graphene has been modified with palladium nanoparticles (Pd NPs) to develop high performance catalysts for the Sonogashira cross coupling reaction. In this research, graphite oxide (GO) sheets exfoliated from graphite were impregnated with Pd(OAc)2 to prepare Pd(2+)/GO. Thermal treatments of the Pd(2+)/GO in H2 flow at 100°C produced Pd/graphene (Pd/G) nanocomposites. TEM images show that Pd NPs were distributed quite uniformly on the graphene sheet without obvious aggregation, and the mean size of Pd NPs was determined to be less than 2 nm in diameter. Morphological and chemical structures of the GO, Pd(2+)/GO, and Pd/G were investigated using FT-IR, XRD, XPS, and XAFS. The resulting Pd/G showed excellent catalytic efficiency in the Sonogashira reaction and offers significant advantages over inorganic supported catalysts such as simple recovery and recycling. Finally, deactivation process of the Pd/G in recycling was investigated. We believe that the remarkable reactivity of the Pd/G catalyst toward the Sonogashira reaction is attributed to the high degree of the Pd NP dispersion and thus the increased low coordination numbers of smaller Pd NPs.

Hydroxyapatite supported cobalt catalysts for hydrogen generation.

The controlled generation of H(2) from storage materials by using an efficient catalytic support is a highly sought after technology; however, the majority of successes utilize expensive materials considered unfeasible. In our report on the creation of a novel, durable, and inexpensive catalytic support material for hydrogen generation, we examine a critical surface modification of hydroxyapatite (HAP) with cobalt ions to provide the necessary catalytic transition metal for the fast hydrolysis of the hydrogen storage material, sodium borohydride (NaBH(4)). By altering the morphology and composition of the HAP crystal supports, we revealed novel methods for enhancing the hydrogen generation rates. Particularly, lowering the Ca composition during synthesis of the HAP crystals afforded a Ca deficient HAP capable of exhibiting a higher surface coverage of cobalt, thereby eliciting faster hydrolysis reaction rates in comparison with the amorphous HAP control having the characteristic Ca content for HAP. A more significant increase in hydrogen generation was observed when using single crystal HAP in comparison with amorphous and calcium deficient HAP supports. Despite the smaller surface area of the hydrothermally prepared single crystal HAP, it provided significantly faster hydrogen generation. Each of the HAP supports exhibit repeatability with catalytic efficiency decreasing by approximately 25% over 3 weeks upon repeated daily exposure to solutions of the hydrogen storage material NaBH(4). Through these experiments, we proved that altering the composition and morphology of cobalt ion exchanged HAP supports can offers a useful means for increasing the rate of controlled hydrogen generation.

The role of hyperthyroidism as the predisposing factor for superior sagittal sinus thrombosis.

Superior sagittal sinus thrombosis (SSST) is an uncommon cause of stroke, whose symptoms and clinical course are highly variable. It is frequently associated with a variety of hypercoagulable states. Coagulation abnormalities are commonly seen in patients with hyperthyroidism. To the best of our knowledge, there are few reports on the association between hyperthyroidism and cerebral venous thrombosis. We report on a 31-year-old male patient with a six-year history of hyperthyroidism who developed seizure and mental deterioration. Findings on brain computed tomography (CT) showed multiple hemorrhages in the subcortical area of both middle frontal gyrus and cerebral digital subtraction angiography (DSA) showed irregular intra-luminal filling defects of the superior sagittal sinus. These findings were consistent with hemorrhagic transformation of SSST. Findings on clinical laboratory tests were consistent with hyperthyroidism. In addition, our patient also showed high activity of factors IX and XI. The patient received treatment with oral anticoagulant and prophylthiouracil. His symptoms showed complete improvement. A follow-up cerebral angiography four weeks after treatment showed a recanalization of the SSS. In conclusion, findings of our case indicate that hypercoagulability may contribute to development of SSST in a patient with hyperthyroidism.

Comparison of posterior fixation alone and supplementation with posterolateral fusion in thoracolumbar burst fractures.

OBJECTIVE: We compared the radiological and clinical outcomes between patients who underwent posterior fixation alone and supplemented with fusion following the onset of thoracolumbar burst fractures. In addition, we also evaluated the necessity of posterolateral fusion for patients treated with posterior pedicle screw fixation. METHODS: From January 2007 to December 2009, 46 consecutive patients with thoracolumbar burst fracture were included in this study. On the basis of posterolateral fusion, we divided our patients into the non-fusion group and the fusion group. The radiological assessment was performed according to the Cobb's method, and results were obtained at immediately, 3, 6, 12 months after surgery. The clinical outcomes were evaluated using the modified Mcnab criteria at the final follow-up. RESULTS: The demographic data and the mean follow-up period were similar between the two groups. Patients of both groups achieved satisfactory clinical outcomes. The mean loss of kyphosis correction showed that patients of both groups experienced loss of correction with no respect to whether they underwent the posterolateral fusion. There was no significant difference in the degree of loss of correction at any time points of the follow-up between the two groups. In addition, we also compared the effect of fixed levels (i.e., short versus long segment) on loss of correction between the two groups and there was no significant difference. There were no major complications postoperatively and during follow-up period. CONCLUSION: We suggest that posterolateral fusion may be unnecessary for patients with thoracolumbar burst fractures who underwent posterior pedicle screw fixation.

Fluorescent composite hydrogels of metal-organic frameworks and functionalized graphene oxide.

GO MOFs! Azobenzoic acid functionalized graphene (A-GO) can act as a structure-directing template that influences hydrogel formation together with metal-organic frameworks (MOFs). Zn(2+) MOFs of pyridine derivatives work as framework linkers between the A-GO sheets (MOF-A-GO, see figure). MOF-A-GO exhibits a strong fluorescence enhancement upon gel formation. In addition, MOF-A-GO selectively recognizes trinitrotoluene.