Characterisation of experimental flowable composites containing fluoride-doped calcium phosphates as promising remineralising materials.

OBJECTIVE: Remineralising composites with antibacterial properties may seal the cavity and prevent secondary caries. This study aimed at developing experimental flowable composites containing different concentrations of fluoride-doped calcium phosphate fillers and evaluating their remineralising and antibacterial properties. METHODS: Experimental resin-based composites containing different concentrations (0-20 %) of fluoride-doped calcium phosphate fillers (VS10/VS20) were formulated. The release of calcium (Ca), phosphate (PO) and fluoride (F) ions was assessed for 30 days. Remineralisation properties were evaluated through ATR-FTIR and SEM/EDX after storage in simulated body fluid (SBF). The metabolic activity and viability of Streptococcus gordonii was also evaluated through ATP, CFU and live/dead confocal microscopy. The evaluation of specific monomer elution from the experimental composites was conducted using high-performance liquid chromatography (HPLC). RESULTS: The composites containing VS10 showed the highest release of Ca, those containing VS20 released more F over time (p < 0.05), while there was no significant difference in terms of PO ions release between the groups (p > 0.05). A quick 7-day mineral precipitation was observed in the tested composites containing VS10 or VS20 at 10 %; these materials also showed the greatest antibacterial activity (p < 0.05). Moreover, the tested composites containing VS10 presented the lowest elution of monomers (p < 0.05). CONCLUSIONS: Innovative composites were developed with low monomers elution, evident antibacterial activity against S. gordonii and important remineralisation properties due to specific ions release. CLINICAL SIGNIFICANCE: Novel composites containing fluoride-doped calcium phosphates may be promising to modulate bacteria growth, promote remineralisation and reduce the risk of cytotoxicity related to monomers' elution.

Release Kinetics of Monomers from Dental Composites Containing Fluoride-Doped Calcium Phosphates.

This study analyse the type of release kinetic of specific monomers from dental resin composites containing various fluoride-doped calcium phosphates. The release behavior of urethane dimethacrylate (UDMA), ethoxylated bisphenol-A dimethacrylate (bis-EMA) and 1.6-hexanediol ethoxylate diacrylate (HEDA) was evaluated over a period of 35 days. Two tailored calcium phosphates doped with different concentrations of fluoride salts (VS10% and VS20%) were prepared and incorporated in the dimethacrylate matrix at various concentrations to generate a range of experimental composites. The release kinetics were characterized using mathematical models such as zero-order, first-order, Peppas and Higuchi models. The results showed that the first-order model best described the release kinetics. UDMA and HEDA exhibited significant differences in release compared to bis-EMA from day 1, while no significant differences were observed between UDMA and HEDA, except on day 35, when UDMA exhibited a higher release rate than HEDA. When comparing the release of each monomer, VS20-R20% had the highest total release percentage, with 3.10 ± 0.25%, whereas the composite VS10-R5% showed the lowest release percentage, with a total of 1.66 ± 0.08%. The release kinetics were influenced by the composition of the resin composites and the presence of calcium fluoride and sodium fluoride in the calcium phosphate played a role in the maximum amounts of monomer released. In conclusion, the release of monomers from the tested resin composites followed a first-order kinetic behaviour, with an initial rapid release that decreased over time. The composition of the resin monomers and the presence of fluoride salts influenced the release kinetics. The VS10-R5% and VS10-R10% resin composites exhibited the lowest total monomer release, suggesting its potential favourable composition with reduced monomer elution. These findings contribute to understanding the release behavior of dental resin composites and provide insights for the development of resin-based bioactive dental materials.

Biodistribution of progesterone in the eye after topical ocular administration via drops or inserts.

Progesterone (PG) has been shown to have a slowing effect on photoreceptor cell death in mouse models of retinitis pigmentosa when administered orally. The aim of this study was to investigate whether ophthalmically administered progesterone was able to reach neuroretina and thus, the distribution through ocular tissues of different PG formulations was studied. The effect of different initial PG concentration was also investigated. Different formulations with PG in their composition (drops, a corneal/scleral-insert and scleral-inserts) were prepared and assayed. Using whole porcine eyes, the different formulations were topically administered to the ocular surface. Frozen eyes were dissected, the PG in each tissue was extracted in acetonitrile and the amount of PG quantified by UHPLC-MS/MS. Our results show that after topical administration, PG diffuses from the ocular surface and distributes throughout all tissues of the eye. Lower levels of PG were found in sclera, choroid and neuroretina when PG was applied as drops compared to inserts. Our results also show that an increase in the initial PG concentrations applied, resulted in a statistically significant increase in the amounts of PG in aqueous humour, sclera, choroid and neuroretina.

Physical-chemical and microbiological performances of graphene-doped PMMA for CAD/CAM applications before and after accelerated aging protocols.

OBJECTIVES: Innovative, nanotechnologies-featuring dental materials for CAD/CAM applications are becoming available. However, the interaction with the oral environment poses critical challenges to their longevity. The present study evaluated specific physical-chemical properties and antimicrobial potential of a CAD/CAM graphene-doped resin before and after accelerated aging protocols. METHODS: Graphene nanofibers (GNF)-doped (<50 ppm) PMMA (GPMMA) and control PMMA CAD/CAM discs were used. Specimens underwent aging procedures of their bulk (thermo- and load-cycling) and surface (24 h-immersion in absolute ethanol), then they were tested for flexural strength, ultimate tensile strength, sorption/solubility, and methyl-methacrylate elution. Surface characterization included x-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, surface roughness, microhardness, and scanning electron microscopy (SEM). Adherence of Streptococcus mutans and Candida albicans, and biofilm formation (continuous-flow bioreactor) by the same strains and an artificial oral microcosm were investigated. RESULTS: GNF-doping improved the physical-chemical bulk properties of the PMMA resin. Surface aging reduced microhardness and increased the roughness of both test and control materials. Surfaces displayed signs of swelling and degradation at SEM. Microbiological data of non-aged surfaces showed that GNF-doping significantly reduced biofilm formation by all tested strains despite having no impact on microbial adherence. After aging, microbial adherence was higher on GPMMA surfaces, while biofilm formation was not promoted. SIGNIFICANCE: GNF-doping improved the material's performance and influenced its antimicrobial potential. This strategy seems a valuable option to overcome the effects of surface degradation induced by aging on the antimicrobial potential of PMMA resin.

Topical Ocular Administration of Progesterone Decreases Photoreceptor Cell Death in Retinal Degeneration Slow (rds) Mice.

Retinitis pigmentosa (RP) is an inherited eye disorder which triggers a cascade of retinal disorders leading to photoreceptor cell death and for which there is currently no effective treatment. The purpose of this research was to study whether ocular administration of a solution of progesterone (PG) in ß-cyclodextrins (CD) could delay photoreceptor cell death and counteract the gliosis process in an animal model of RP (rds mice). The possible effect of PG reaching the contralateral eye through the circulatory system was also evaluated. Finally, this research discusses and evaluates the diffusion of the drug from possible topical formulations for ocular administration of PG. A group of rds mice received one drop of a solution of PG in CD every 12 h for 10 days to the left eye, while the right eye was left untreated. Another group of rds mice (control) received the drug vehicle (PBS) on the left eye and, again, the right eye was left untreated. Once the treatment was finished on postnatal day 21, the animals were euthanized and histological immunofluorescence studies (TUNEL, GFAP, and DAPI staining) were carried out. Our results showed that the administration of a solution of PG in CD (CD-PG) as drops significantly decreased cell death and inflammation in the retina of the PG-treated eyes of rds mice. No effect was seen in the contralateral eye from PG that may have entered systemic circulation. In conclusion, CD-PG applied topically as drops to the eye decreases photoreceptor cell death in the early stages of RP, delaying vision loss and decreasing gliosis.

3D Printing of Temporary Prostheses for Controlled-Release of Drugs: Design, Physical Characterization and Preliminary Studies.

In recent years, the use of 3D printing technologies in orthopedic surgery has markedly increased, as they offer the possibility of printing personalized prostheses. The work presented in this article is a preliminary study of a research project which aims to manufacture customized spacers containing antibiotics for use in joint replacement surgery. The objective of this work was to design and print different 3D constructs to evaluate the use of different materials, their properties after the process of 3D printing, such as resistance, and the release kinetics of drugs from the constructs. Different designs and different materials were analyzed to obtain a 3D construct with suitable properties. Our design takes advantage of the micropores created between the layers of the 3D printed filaments to release the contained drug. Using polylactic acid (PLA) we were able to print cylindrical structures with interconnected micropores and a hollow chamber capable of releasing methylene blue, which was selected as a model drug. The final PLA 3D construct was printed with a 10% infill. The physical and technological characteristics, morphological changes at body temperature and interaction with water were considered to be acceptable. The PLA 3D printed constructs were found to have sufficient strength to withstand a force of 500 kg. The results obtained allow to continue research in this project, with the aim of manufacturing prostheses containing a reservoir of antibiotics or other drugs in their interior for their subsequent controlled release.

Development, characterization, and ex vivo evaluation of an insert for the ocular administration of progesterone.

Progesterone (PG) affords neuroprotection in degenerative diseases associated to oxidative stress, such as cataracts, age-related macular degeneration, glaucoma, diabetic retinopathy and retinitis pigmentosa. The aim of this project was to develop ocular inserts for delivery of PG to the eye. Different inserts with PG in its composition were formulated and the insert with the best characteristics (59% polyvinyl alcohol, 39% polyvinylpyrrolidone K30 and 2% propylene glycol) was selected for ex vivo studies. Physical characteristics and drug release patterns of the insert were analysed. In vitro diffusion studies revealed a controlled diffusion of progesterone. Ex vivo experiments demonstrated similar trans-corneal and trans-scleral PG diffusion (corneal apparent permeability coefficient 6.46 ± 0.38 × 10-7 cm/s and scleral apparent permeability coefficient 5.87 ± 1.18 × 10-7 cm/s; mean ± SD; n = 5). However, the amount of PG accumulated in scleras was statistically higher than in corneas (30.07 ± 9.09 µg/cm2 and 15.56 ± 4.36 µg/cm2 respectively). The PG-loaded inserts (55.6 µg/cm2) were thin, translucent, showed no irritancy (HET-CAM test) and were elastic and robust, all suitable properties for its potential use in the treatment of several ocular diseases.

HPLC-UV analytical validation of a method for quantification of progesterone in ex vivo trans-corneal and trans-scleral diffusion studies.

Progesterone (PG) diminishes free radical damage and thus can afford protection against oxidative stress affecting the retina. The therapeutic use of PG is limited because it is a highly hydrophobic steroid hormone with very low solubility in water. This is the main drawback for the therapeutic application of PG at ocular level. The aims of this study were: (i) to analyze if PG causes ocular irritation (ii) to validate a HPLC method to determine PG in ex vivo studies and (iii) to evaluate PG permeation through cornea and sclera. A high performance liquid chromatographic method was developed and validated to detect PG incorporated to ß-cyclodextrin using a Waters Sunfire C18 (150 × 4.6 mm) reverse-phase column packed with 5 µm silica particles using a mobile phase consisted of a mixture of acetonitrile (ACN) and pure water 80:20 (v/v), pH 7.4. The limit of detection and the limit of quantification for 50 µL injection of PG were found to be 0.42 and 1.26 µg/mL, respectively. The calibration curve showed excellent linearity over the concentration range (0.5 µg/mL to 100 µg/mL). As proof of concept, ex-vivo experiments to investigate PG permeation through cornea and sclera with vertical diffusion cells were carried out to quantify PG diffusion. Ex vivo experiments demonstrate its applicability to investigate permeation levels of PG from 6.57 ±â€¯0.37 µg/cm2 at cornea and 8.13 ±â€¯0.85 µg/cm2 sclera. In addition, at the end of diffusion studies the amount of PG retained in each tissue was also quantified, and it was 40.87 ±â€¯9.84 µg/cm2 (mean ±â€¯SD; n = 6) in cornea and 56.11 ±â€¯16.67 µg/cm2 (mean ±â€¯SD; n = 6) in sclera.

Ex-Vivo Trans-Corneal and Trans-Scleral Diffusion Studies with Ocular Formulations of Glutathione as an Antioxidant Treatment for Ocular Diseases.

Exposure to sunlight and contact with atmospheric oxygen makes the eye particularly susceptible to oxidative stress, which can potentially produce cellular damage. In physiological conditions, there are several antioxidant defense mechanisms within the eye. Glutathione (GSH) is the most important antioxidant in the eye; GSH deficit has been linked to several ocular pathologies. The aim of this study was to explore the potential for newly developed formulations allowing controlled delivery of antioxidants such as GSH and vitamin C (Vit C) directly to the eye. We have investigated the stability of antioxidants in aqueous solution and assessed ex-vivo the diffusion of GSH through two ocular membranes, namely cornea and sclera, either in solution or included in a semisolid insert. We have also carried out the hen's egg-chlorioallantoic membrane test (HET-CAM) to evaluate the ocular irritancy of the different antioxidant solutions. Our results showed that GSH is stable for up to 30 days at 4 °C in darkness and it is not an irritant to the eye. The diffusion studies revealed that the manufactured formulation, a semisolid insert containing GSH, could deliver this tripeptide directly to the eye in a sustained manner.

Micelles of Progesterone for Topical Eye Administration: Interspecies and Intertissues Differences in Ex Vivo Ocular Permeability.

Progesterone (PG) may provide protection to the retina during retinitis pigmentosa, but its topical ocular supply is hampered by PG poor aqueous solubility and low ocular bioavailability. The development of efficient topical ocular forms must face up to two relevant challenges: Protective barriers of the eyes and lack of validated ex vivo tests to predict drug permeability. The aims of this study were: (i) To design micelles using Pluronic F68 and Soluplus copolymers to overcome PG solubility and permeability; and (ii) to compare drug diffusion through the cornea and sclera of three animal species (rabbit, porcine, and bovine) to investigate interspecies differences. Micelles of Pluronic F68 (3-4 nm) and Soluplus (52-59 nm) increased PG solubility by one and two orders of magnitude, respectively and exhibited nearly a 100% encapsulation efficiency. Soluplus systems showed in situ gelling capability in contrast to the low viscosity Pluronic F68 micelles. The formulations successfully passed the hen's egg-chorioallantoic membrane test (HET-CAM) test. PG penetration through rabbit cornea and sclera was faster than through porcine or bovine cornea, although the differences were also formulation-dependent. Porcine tissues showed intermediate permeability between rabbit and bovine. Soluplus micelles allowed greater PG accumulation in cornea and sclera whereas Pluronic F68 promoted a faster penetration of lower PG doses.

Influence of Chemical Enhancers and Iontophoresis on the In Vitro Transdermal Permeation of Propranolol: Evaluation by Dermatopharmacokinetics.

The aims of this study were to assess, in vitro, the possibility of administering propranolol transdermally and to evaluate the usefulness of the dermatopharmacokinetic (DPK) method in assessing the transport of drugs through stratum corneum, using propranolol as a model compound. Four chemical enhancers (decenoic and oleic acid, laurocapram, and R-(+)-limonene) and iontophoresis at two current densities, 0.25 and 0.5 mA/cm² were tested. R-(+)-limonene, and iontophoresis at 0.5 mA/cm² were proven to be the most efficient in increasing propranolol transdermal flux, both doubled the original propranolol transdermal flux. Iontophoresis was demonstrated to be superior than the chemical enhancer because it allowed faster delivery of the drug. The DPK method was sufficiently sensitive to detect subtle vehicle-induced effects on the skin permeation of propranolol. The shorter duration of these experiments and their ability to provide mechanistic information about partition between vehicle and skin and diffusivity through skin place them as practical and potentially insightful approach to quantify and, ultimately, optimize topical bioavailability.

Anti-angiogenic drug loaded liposomes: Nanotherapy for early atherosclerotic lesions in mice.

Fumagillin-loaded liposomes were injected into ApoE-KO mice. The animals were divided into several groups to test the efficacy of this anti-angiogenic drug for early treatment of atherosclerotic lesions. Statistical analysis of the lesions revealed a decrease in the lesion size after 5 weeks of treatment.

Ex vivo rabbit cornea diffusion studies with a soluble insert of moxifloxacin.

The objective of this research was to develop and evaluate an ocular insert for the controlled drug delivery of moxifloxacin which could perhaps be used in the treatment of corneal keratitis or even bacterial endophthalmitis. We have evaluated the ex vivo ocular diffusion of moxifloxacin through rabbit cornea, both fresh and preserved under different conditions. Histological studies were also carried out. Subsequently, drug matrix inserts were prepared using bioadhesive polymers. The inserts were evaluated for their physicochemical parameters. Ophthalmic ex vivo permeation of moxifloxacin was carried out with the most promising insert. The formulate insert was thin and provided higher ocular diffusion than commercial formulations. Ocular diffusion studies revealed significant differences between fresh and frozen corneas. Histological examinations also showed differences in the thickness of stroma between fresh and frozen corneas. The ophthalmic insert we have developed allows a larger quantity of moxifloxacin to permeate through the cornea than existing commercial formulations of the drug. Ocular delivery of moxifloxacin with this insert could be a new approach for the treatment of eye diseases.

A UHPLC-UV Method to Quantify Skin Deposition and Transdermal Permeation of Tizanidine Hydrochloride.

Tizanidine hydrochloride is an α2-adrenergic agonist used for the symptomatic relief of spasticity associated with multiple sclerosis or with spinal cord injury or disease. The objective of this study was to develop an isocratic, robust and sensitive ultra-high performance liquid chromatography method using UV detection for use in a project to develop a transdermal therapeutic system to deliver tizanidine across the skin. Isocratic separation was achieved using a C18 column and a mobile phase comprising a 80:20 mixture of 0.004% trifluoroacetic acid in water and MeCN (pH* 3.2) at a flow rate of 0.2 mL min(-1) Tizanidine eluted at 1.499 min and the total run time was 2 min. The method was specific, robust and the response was accurate, precise and linear from 17.4 to 290 ng mL(-1) In contrast to existing methods, the method developed here was validated over a concentration range so as to include the low concentrations frequently observed in transdermal permeation studies and in samples extracted from the cutaneous matrix. Its suitability for use in transdermal permeation studies was subsequently tested and confirmed in preliminary experiments using porcine skin in vitro.

Evaluation of percutaneous absorption of esculetin: effect of chemical enhancers.

Percutaneous transdermal absorption of esculetin (6,7-dihydroxycoumarin), an oxidative damage inhibitor, was evaluated by means of in vitro permeation studies in which vertical Franz-type diffusion cells and pig ear skin were employed. To determine the absorption of esculetin, we validated a simple, accurate, precise, and rapid HPLC-UV method. Additionally, the effects of several percutaneous enhancers were studied. Pretreatment of porcine skin was performed with ethanol (control vehicle), decenoic acid, oleic acid, R-(+)-limonene, and laurocapram (Azone®) (5% in ethanol, w/w, respectively). Pretreatment of skin with oleic acid or laurocapram led to statistically significant differences in the transdermal flux of esculetin with respect to controls. Of the two enhancers, laurocapram showed the greatest capacity to enhance the flux of esculetin across pig skin.

Elastic vesicles of sumatriptan succinate for transdermal administration: characterization and in vitro permeation studies.

Elastic liposomes, including sumatriptan succinate, were prepared for their transdermal administration. Lipid vesicles containing 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) or l-α-phosphatidylcholine dilauroyl (DLPC) phospholipids were characterized for various parameters, including size, particle-size distribution (i.e., polydispersity index), and elasticity. In vitro transdermal experiments for the study of the skin penetration of sumatriptan succinate contained in liposomes were performed by using flow-through diffusion cells. The diameter of sumatriptan liposomes with different lipid compositions varied between 279 and 282 nm, and the polydispersity index value for the size distribution of liposomal formulations was <0.5. DLPC vesicles proved to be more elastic and provided a higher sumatriptan transdermal flux than vesicles formulated with DOPC phospolipid.

Combined strategies for enhancing the transdermal absorption of midazolam through human skin.

OBJECTIVES: Midazolam administration by intravenous or intramuscular injection produces pain and stress. For this reason, alternative methods of administration have been proposed. The transdermal administration of midazolam could improve patient comfort, which is especially important for children in the pre-operative period. We aimed to assess the effect of iontophoresis and chemical percutaneous enhancers applied individually and together, to determine if a synergistic effect is achieved when both enhancement techniques are simultaneously employed. METHODS: This work reports the characterization of the passive diffusion of midazolam hydrochloride through human skin in vitro and evaluates the effect of iontophoresis application and chemical percutaneous enhancers on said diffusion when employed both individually and in combination. KEY FINDINGS: Percutaneous absorption assays demonstrated that the physical technique of iontophoresis, when applied alone, moderately increased midazolam hydrochloride permeation flux through human skin, producing a similar effect to that obtained with R-(+)-limonene chemical enhancer. Among the strategies assayed, it was observed that Azone produced the most pronounced enhancement effect when applied separately. The combination of pre-treatment with Azone and iontophoresis exhibited a higher capacity for enhancing the transdermal flux of midazolam through human skin than Azone alone. CONCLUSIONS: In conclusion, when applied individually, Azone exhibited the greatest enhancement effect on the transdermal diffusion of midazolam of the various strategies assayed. The combination of Azone and iontophoresis produce the highest transdermal steady-state flux of midazolam but no synergic effect was achieved when the two enhancement strategies were applied in combination, showing that although selecting the best conditions for iontophoresis application, it is less effective for augmenting the transdermal delivery of midazolam than the chemical enhancer Azone.

Using transdermal iontophoresis to increase granisetron delivery across skin in vitro and in vivo: effect of experimental conditions and a comparison with other enhancement strategies.

The objectives of the study were (i) to investigate the effect of experimental parameters on the iontophoretic transport of granisetron, (ii) to identify the relative contributions of electromigration (EM) and electroosmosis (EO), (iii) to determine the feasibility of delivering therapeutic amounts of drug for the treatment of chemotherapy-induced nausea and vomiting and (iv) to test the in vitro results in a simple animal model in vivo. Preliminary in vitro studies using aqueous granisetron formulations investigating the effect of drug concentration (5, 10, 20 and 40 mM) and current density (0.1, 0.2, 0.3 mA cm(-2)) were performed using porcine ear skin. As expected, cumulative delivery in vitro at the 20 and 40 mM concentrations was significantly greater than that at 5 and 10mM, which were not statistically different (p<0.05). Increasing the applied current density from 0.1 to 0.3 mA cm(-2) resulted in a approximately 4.2-fold increase in iontophoretic flux. Furthermore, in the absence of Na(+) in the formulation, no dependence of iontophoretic flux on drug concentration was reported (at a granisetron concentration of 40 mM, the transport rate was 2.93+/-0.62 microg cm(-2)min(-1)). Co-iontophoresis of acetaminophen was used to show that EM was the predominant transport mechanism accounting for 71-86% of total granisetron delivery. In vivo studies in Wistar rats (40 mM granisetron; application of 0.3 mA cm(-2) for 5h with Ag/AgCl electrodes and salt bridges) showed an average iontophoretic input rate (k(input)) of 0.83+/-0.26 microg min(-1) and a maximum plasma concentration (C(max)) of 0.092+/-0.004 microg ml(-1). Based on these results and given the known pharmacokinetics, transdermal iontophoresis could achieve therapeutic drug levels for the management of chemotherapy-induced emesis using a reasonably sized (4-6 cm(2)) patch.