RESUMEN
All-solid lithium (Li) metal batteries (ASSLBs) with sulfide-based solid electrolyte (SEs) films exhibit excellent electrochemical performance, rendering them capable of satisfying the growing demand for energy storage systems. However, challenges persist in the application of SEs film owing to their reactivity with Li metal and uncontrolled formation of lithium dendrites. In this study, iodine-doped poly(vinylidenefluoride-hexafluoropropylene) (PVDF-HFP) as an interlayer (PHI) to establish a stable interphase between Li metal and Li6 PS5 Cl (LPSCl) films is investigated. The release of I ions and PVDF-HFP produces LiI and LiF, effectively suppressing lithium dendrite growth. Density functional theory calculations show that the synthesized interlayer layer exhibits high interfacial energy. Results show that the PHI@Li/LPSCl film/PHI@Li symmetrical cells can cycle for more than 650 h at 0.1 mA cm-2 . The PHI@Li/LPSCl film/NCM622 cell exhibits a distinct enhancement in capacity retention of ≈26% when using LiNi0.6 Mn0.2 Co0.2 O2 (NCM622) as the cathode, compared to pristine Li metal as the anode. This study presents a feasible method for producing next-generation dendrite-free SEs films, promoting their practical use in ASSLBs.
RESUMEN
Two new diamond-like (DL) chalcogenides, Li2MgGeSe4 and Li2MgSnSe4, have been successfully synthesized using a conventional high-temperature solid-state method. The two compounds crystallize in the non-centrosymmetric space group Pmn21 with a = 8.402 (14) Å, b = 7.181 (12) Å, c = 6.728 (11) Å, Z = 2 for Li2MgSnSe4, and a = 8.2961 (7) Å, b = 7.0069 (5) Å, c = 6.6116 (6) Å, Z = 2 for Li2MgGeSe4. The calculated results show that the second harmonic generation (SHG) coefficients of Li2MgSnSe4 (d33 = 12.19 pm/v) and Li2MgGeSe4 (d33 = -14.77 pm/v), mainly deriving from the [MSe4] (M = Ge, Sn) tetrahedral units, are close to the one in the benchmark AgGaS2 (d14 = 13.7 pm/V). The calculated band gaps for Li2MgSnSe4 and Li2MgGeSe4 are 2.42 and 2.44 eV, respectively. Moreover, the two compounds are the first series of alkali and alkaline-earth metal DL compounds in the I2-II-IV-VI4 family, enriching the structural diversity of DL compounds.
RESUMEN
A new fluorine-containing chalcohalide, Ba4GaS4F3, has been synthesized by conventional high-temperature solid-state reaction. The compound crystallizes in the centrosymmetric space group I41/a with a = b = 16.628 (5) Å, c = 17.139 (10) Å, Z = 16. Experimental and theoretical results confirm that Ba4GaS4F3 is a direct band gap compound with an experimental band gap of about 3.13 eV, and the band gap is mainly determined by the Ba-5p, F-2p and S-3p orbitals. What's more, different from the many newly discovered chalcohalides in the Ba3AM4Q (A = Ga, In; M = S, Se; Q = Cl, Br, I) family, Ba4GaS4F3 is the first reported compound in the Ba4AM4D3 (A = Ga, In; M = chalcogen; D = halogen) family. The results enrich the structural diversity of metal chalcohalides.
RESUMEN
Exploration of the versatility of materials is very important for increasing the utilization of materials. Herein, we successfully prepared Bi4O5I2 powders via a facile solvothermal method. The Bi4O5I2 photocatalyst exhibited significantly higher photocatalytic activity as compared to the common BiOI photocatalyst in the degradation of methyl orange, methylene blue and rhodamine B under visible light irradiation. Especially, for the degradation of methyl orange, the photocatalytic activity of Bi4O5I2 is about 10 times that of BiOI. Moreover, Bi4O5I2 exhibits an extremely high second harmonic generation response of about 20 × KDP (the benchmark) estimated by the unbiased ab initio calculations. The coexisting multifunction of Bi4O5I2 is mainly because of the increased dipole moment due to the stereochemical activity of lone pairs that promotes separation and transfer of photogenerated carriers, then enhances the photocatalytic activity and results in a high second harmonic generation response. This indicates that Bi4O5I2 may have good potential applications in photocatalytic and nonlinear optical fields.
RESUMEN
As one of nanomedicine delivery systems (NDSs), drug nanocrystals exhibited an excellent anticancer effect. Recently, differences of internalization mechanisms and subcellular localization of both drug nanocrystals and small molecular free drug have drawn much attention. In this paper, paclitaxel (PTX) as a model anticancer drug was directly labeled with 4-chloro-7-nitro-1, 2, 3-benzoxadiazole (NBD-Cl) (a drug-fluorophore conjugate Ma et al. (2016) and Wang et al. (2016) [1,2] (PTX-NBD)). PTX-NBD was synthesized by nucleophilic substitution reaction of PTX with NBD-Cl in high yield and characterized by fluorescence, XRD, ESI-MS, and FT-IR analysis. Subsequently, the cube-shaped PTX-NBD nanocrystals were prepared with an antisolvent method followed by surface functionalization of SPC and MPEG-DSPE. The obtained specific shaped PTX-NBD@PC-PEG NCs had a hydrodynamic particle size of â¼50nm, excellent colloidal stability, and a high drug-loading content of â¼64%. Moreover, in comparison with free PTX-NBD and the sphere-shaped PTX-NBD nanocrystals with surface functionalization of SPC and MPEG-DSPE (PTX-NBD@PC-PEG NSs), PTX-NBD@PC-PEG NCs remarkably reduced burst release and improved cellular uptake efficiency and in vitro cancer cell killing ability. In a word, the work highlights the potential of theranostic prodrug nanocrystals based on the drug-fluorophore conjugates for cell imaging and chemotherapy.
Asunto(s)
Nanopartículas/química , Paclitaxel/química , Fosfatidilcolinas/química , Fosfatidiletanolaminas/química , Polietilenglicoles/química , Profármacos/química , Supervivencia Celular/efectos de los fármacos , Fluorescencia , Células HeLa , Humanos , Microscopía Electrónica de Transmisión , Nanopartículas/ultraestructura , Nitrocompuestos/química , Oxadiazoles/química , Paclitaxel/farmacología , Profármacos/farmacología , Glycine max/química , Espectroscopía Infrarroja por Transformada de Fourier , Nanomedicina Teranóstica/métodos , Difracción de Rayos XRESUMEN
The structural and electronic properties of N-doped, Au-adsorbed, and Au/N co-implanted TiO2 nanotubes (NTs) were investigated by performing first-principle density functional theory (DFT) calculations. For all the possible implanted configurations, the radius and bond length do not change significantly relative to the clean NTs. Our results indicate that the introduction of N into NTs is in favor of implantation of Au, and Au pre-adsorption on the NTs can also enhance the N concentration in NTs. The synergistic stability can be mainly attributed to charge transfer between Au and N atoms. In co-implanted configurations, the empty N 2p states in the band gap are occupied by one electron; denoted by Au 5s states. Thus, the associated electron transition among the valence band, the conduction band and the gap states results in redshift of the light absorption. In addition, the disappearance of N 2p empty states can effectively decrease the photogenerated carrier combination. Therefore, the Au/N implanted NTs should be regarded as a promising photocatalytic material under the visible light region.