RESUMEN
Micro-light-emitting diodes (µLEDs) hold significant promise for applications in displays and visible light communication (VLC). This study substantiates the viability of a wavelength division multiplexing (WDM)-VLC system using InGaN blue, green, and red µLED devices. The devices exhibited notable color stability and high modulation bandwidth due to the weakly polarized electric field in the blue and green semipolar devices and the stress-optimized structure in the red device. The aggregated data rate reached 11.14â Gbps. Moreover, the blue, green, and red InGaN µLEDs exhibited a wide color gamut, encompassing 119.4% of the NTSC and 89.2% of the Rec. 2020 standards, affirming the potential of blue, green, and red InGaN µLEDs for applications in full-color display and WDM-VLC systems.
RESUMEN
In this study, AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) processed via standard laser dicing (SLD) and multifocal laser stealth dicing (MFLSD) were investigated. Adopting the MFLSD technology would generate a roughing surface rather than the V-shaped grooves on the sidewall of 508 × 508 µm2 DUV-LEDs, which would reduce the forward operating voltage and increase the wall-plug efficiency, light output power, and far-field radiation patterns of these devices. In addition, the wavelength shift, far-field patterns, and light-tracing simulation results of the DUV-LEDs processed with SLD and MFLSD were clearly demonstrated and analyzed. Accordingly, it was observed that the MFLSD process provided more possibilities for photon escape to increase the light extraction efficiency (LEE) of DUV-LEDs, thus decreased the wavelength-redshift and junction temperature in DUV-LEDs. These results provide a reference for advanced nano-processing practices implemented during the fabrication of semiconductor devices.
RESUMEN
A composite strain-modulation strategy to achieve high-performing green µ-LED devices for visible light communication is proposed. Compared with the conventional pre-well structure, introducing a pre-layer to enlarge the lateral lattice constant of the underlayer decreased the strain in the overall strain-modulated layer and MQW. This improved the crystal quality and suppressed the quantum confinement Stark effect. Using this modulation strategy, the green µ-LED array with the compound pre-strained structure exhibited a light output power of 20.5â mW and modulation bandwidth of 366â MHz, corresponding to improvements of 61% and 78%, respectively, compared with those of µ-LEDs with a pre-well structure.
RESUMEN
The effects of different p-GaN layer thickness on the photoelectric and thermal properties of AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) were investigated. The results revealed that appropriate thinning of the p-GaN layer enhances the photoelectric performance and thermal stability of DUV-LEDs, reducing current crowding effects that affect the external quantum efficiency and chip heat dissipation. The ABC + f(n) model was used to analyse the EQE, which helped in identifying the different physical mechanisms for DUV-LEDs with different p-GaN layer thickness. Moreover, the finite difference time domain simulation results revealed that the light-extraction efficiency of the DUV-LEDs exhibits a trend similar to that of damped vibration as the thickness of the p-GaN layer increases. The AlGaN-based DUV-LED with a p-GaN layer thickness of 20â nm exhibited the best photoelectric characteristics and thermal stability.
RESUMEN
The temperature-dependent external quantum efficiency (EQE) droops of 265 nm, 275 nm, 280 nm, and 285 nm AlGaN-based ultraviolet-c light-emitting diodes (UVC-LEDs) differed in Al contents have been comprehensively investigated. The modifiedABCmodel (R = An+Bn2+Cn3) with the current-leakage related term,f(n)= Dn4, has been employed to analyze the recombination mechanisms in these UVC-LED samples. Experimental results reveal that, at relatively low electrical-current levels, the contribution of Shockley-Read-Hall (SRH) recombination exceeds those of the Auger recombination and carrier leakage. At relatively high electrical-current levels, the Auger recombination and carrier leakage jointly dominate the EQE droop phenomenon. Moreover, the inactivation efficiencies of 222 nm excimer lamp, 254 nm portable Mercury lamp, 265 nm, 280 nm, and 285 nm UVC-LED arrays in the inactivation ofEscherichia colihave been experimentally investigated, which could provide a technical reference for fighting against the new COVID-19.
RESUMEN
In this study, deep-ultraviolet light-emitting diodes (DUV LEDs) with different chip sidewall geometries (CSGs) are investigated. The structure had two types of chip sidewall designs that combined DUV LEDs with the same p-GaN thickness. By comparing the differences of the characteristics such as the external quantum efficiency droops, light output power, light extraction efficiency (LEE), and junction temperature of these DUV LEDs, the self-heated effect and light-tracing simulation results have been clearly demonstrated to explain the inclined sidewalls that provide more possibility pathway for photons escape to increase the LEE of LEDs; thus, the DUV LEDs with the CSG presented improved performance. These results demonstrate the potential of CSG for DUV LED applications.
RESUMEN
This study utilized thin p-GaN, indium tin oxide (ITO), and a reflective passivation layer (RPL) to improve the performance of deep ultra-violet light-emitting diodes (DUV-LEDs). RPL reflectors, which comprise HfO2/SiO2 stacks of different thickness to maintain high reflectance, were deposited on the DUV-LEDs with 40 nm-thick p-GaN and 12 nm-thick ITO thin films. Although the thin p-GaN and ITO films affect the operation voltage of DUV-LEDs, the highly reflective RPL structure improved the WPE and light extraction efficiency (LEE) of the DUV-LEDs, yielding the best WPE and LEE of 2.59% and 7.57%, respectively. The junction temperature of DUV-LEDs with thick p-GaN increased linearly with the injection current, while that of DUV-LEDs with thin p-GaN, thin ITO, and RPL was lower than that of the Ref-LED under high injection currents (> 500 mA). This influenced the temperature sensitive coefficients (dV/dT, dLOP/dT, and dWLP/dT). The thermal behavior of DUV-LEDs with p-GaN and ITO layers of different thicknesses with/without the RPL was discussed in detail.
RESUMEN
In this study, deep ultraviolet light-emitting diodes (DUV-LEDs) with a reflective passivation layer (RPL) were investigated. The RPL consists of HfO2/SiO2 stacks as distributed Bragg reflectors, which are deposited on two DUV-LEDs with different p-GaN thicknesses. The RPL structure improved the external quantum efficiency droops of the DUV-LEDs with thick and thin p-GaN, thereby increasing their light output power by 18.4% and 39.4% under injection current of 500 mA and by 17.9% and 37.9% under injection current of 1000 mA, respectively. The efficiency droops of the DUV-LEDs with and without the RPL with thick p-GaN were 20.1% and 19.1% and with thin p-GaN were 18.0% and 15.6%, respectively. The DUV-LEDs with the RPL presented improved performance. The above results demonstrate the potential for development of the RPLs for DUV-LED applications.
RESUMEN
In recent years, the process requirements of nano-devices have led to the gradual reduction in the scale of semiconductor devices, and the consequent non-negligible sidewall defects caused by etching. Since plasma-enhanced chemical vapor deposition can no longer provide sufficient step coverage, the characteristics of atomic layer deposition ALD technology are used to solve this problem. ALD utilizes self-limiting interactions between the precursor gas and the substrate surface. When the reactive gas forms a single layer of chemical adsorbed on the substrate surface, no reaction occurs between them and the growth thickness can be controlled. At the Å level, it can provide good step coverage. In this study, recent research on the ALD passivation on micro-light-emitting diodes and vertical cavity surface emitting lasers was reviewed and compared. Several passivation methods were demonstrated to lead to enhanced light efficiency, reduced leakage, and improved reliability.
RESUMEN
Semiconductor quantum dots (QDs) have attracted extensive attention because of their remarkable optical and electrical characteristics. However, the practical application of QDs and further the QD composite films have greatly been hindered mainly owing to their essential drawbacks of extreme unstability under oxygen and water environments. Herein, one simple method has been employed to enhance enormously the stability of Cd xZn1- xSe yS1- y QD composite films by a combination of Cd xZn1- xSe yS1- y QDs and poly(vinylidene) fluoride (PVDF), which is characteristic of closely arranged molecular chains and strong hydrogen bonds. There are many particular advantages in using QD/PVDF composite films such as easy processing, low cost, large-area fabrication, and especially extreme stability even in the boiling water for more than 240 min. By employing K2SiF6:Mn4+ as a red phosphor, a prototype white light-emitting diode (WLED) with color coordinates of (0.3307, 0.3387), Tc of 5568 K, and color gamut 112.1NTSC(1931)% at 20 mA has been fabricated, and there is little variation under different excitation currents, indicating that the QD/PVDF composite films fabricated by this simple blade-coating process make them ideal candidates for liquid-crystal display backlight utilization via assembling a WLED on a large scale owing to its ultrahigh stability under severe environments.