High-Performance Organic-Inorganic Hybrid Conductive Hydrogels for Stretchable Elastic All-Hydrogel Supercapacitors and Flexible Self-Powered Integrated Systems.

Conductive polymer hydrogels exhibit unique electrical, electrochemical, and mechanical properties, making them highly competitive electrode materials for stretchable high-capacity energy storage devices for cutting-edge wearable electronics. However, it remains extremely challenging to simultaneously achieve large mechanical stretchability, high electrical conductivity, and excellent electrochemical properties in conductive polymer hydrogels because introducing soft insulating networks for improving stretchability inevitably deteriorates the connectivity of rigid conductive domain and decreases the conductivity and electrochemical activity. This work proposes a distinct confinement self-assembly and multiple crosslinking strategy to develop a new type of organic-inorganic hybrid conductive hydrogels with biphase interpenetrating cross-linked networks. The hydrogels simultaneously exhibit high conductivity (2000 S m-1), large stretchability (200%), and high electrochemical activity, outperforming existing conductive hydrogels. The inherent mechanisms for the unparalleled comprehensive performances are thoroughly investigated. Elastic all-hydrogel supercapacitors are prepared based on the hydrogels, showing high specific capacitance (212.5 mF cm-2), excellent energy density (18.89 µWh cm-2), and large deformability. Moreover, flexible self-powered luminescent integrated systems are constructed based on the supercapacitors, which can spontaneously shine anytime and anywhere without extra power. This work provides new insights and feasible avenues for developing high-performance stretchable electrode materials and energy storage devices for wearable electronics.

Highly Stable Silver Nanowire Plasmonic Electrodes for Flexible Polymer Light-Emitting Devices.

Silver nanowire (AgNW) transparent electrodes are considered as a promising candidate for applications in flexible optoelectronic devices. However, it remains a great challenge to obtain flexible AgNW electrodes with excellent optoelectrical properties and mechanical flexibility. Here, highly stable Ag nanoparticle (AgNP)-enhanced plasmonic AgNW electrodes are demonstrated via the controllable in situ growth of AgNPs at the AgNW junctions and introduction of an l-histidine (l-His) wrapping layer. The flexible transparent electrodes of AgNW-AgNP/l-His possess a low sheet resistance (Rsh) of ∼17.5 Ω sq-1, a high transmittance of ∼92.5% (550 nm), and a robust mechanical stability (100,000 bending cycles). Benefiting from plasmon-coupling effects, flexible polymer light-emitting devices (FPLEDs) with AgNW-AgNP/l-His electrodes present a current efficiency (CE) of ∼14.8 cd A-1 and an external quantum efficiency (EQE) of ∼5.6%, constituting ∼80% and ∼75% increases compared to those of the reference devices with AgNW electrodes, respectively. Additionally, the laminated flexible transparent PLEDs (FT-PLEDs) are demonstrated by integrating polydimethylsiloxane/AgNW-AgNP anodes by a soft lamination process. The FT-PLEDs present a CE of ∼7.1 cd A-1 (cathode side: ∼3.9 cd A-1; anode side: ∼3.2 cd A-1) and an EQE of ∼2.7% (cathode side: ∼1.5%; anode side: ∼1.2%). Furthermore, the FPLEDs and FT-PLEDs exhibit robust mechanical durability, maintaining ∼89% and ∼86% of their initial luminance after 1000 bending cycles at a bending radius of 2 mm, respectively. This work opens up a new avenue for the development of high performance and stable flexible optoelectronic devices.

Highly elastic energy storage device based on intrinsically super-stretchable polymer lithium-ion conductor with high conductivity.

Stretchable power sources, especially stretchable lithium-ion batteries (LIBs), have attracted increasing attention due to their enormous prospects for powering flexible/wearable electronics. Despite recent advances, it is still challenging to develop ultra-stretchable LIBs that can withstand large deformation. In particular, stretchable LIBs require an elastic electrolyte as a basic component, while the conductivity of most elastic electrolytes drops sharply during deformation, especially during large deformations. This is why highly stretchable LIBs have not yet been realized until now. As a proof of concept, a super-stretchable LIB with strain up to 1200% is created based on an intrinsically super-stretchable polymer electrolyte as the lithium-ion conductor. The super-stretchable conductive system is constructed by an effective diblock copolymerization strategy via photocuring of vinyl functionalized 2-ureido-4-pyrimidone (VFUpy), an acrylic monomer containing succinonitrile and a lithium salt, achieving high ionic conductivity (3.5 × 10-4 mS cm-1 at room temperature (RT)) and large deformation (the strain can reach 4560%). The acrylic elastomer containing Li-ion conductive domains can strongly increase the compatibility between the neighboring elastic networks, resulting in high ionic conductivity under ultra-large deformation, while VFUpy increases elasticity modulus (over three times) and electrochemical stability (voltage window reaches 5.3 V) of the prepared polymer conductor. At a strain of up to 1200%, the resulting stretchable LIBs are still sufficient to power LEDs. This study sheds light on the design and development of high-performance intrinsically super-stretchable materials for the advancement of highly elastic energy storage devices for powering flexible/wearable electronics that can endure large deformation.

Efficient Flexible Fabric-Based Top-Emitting Polymer Light-Emitting Devices for Wearable Electronics.

Low-cost fabric-based top-emitting polymer light-emitting devices (Fa-TPLEDs) have aroused increasing attention due to their remarkable potential applications in wearable displays. However, it is still challenging to realize efficient all-solution-processed devices from bottom electrodes to top electrodes with large-scale fabrication. Here, a smooth reflective Ag cathode integrated on fabric by one-step silver mirror reaction and a composite transparent anode of polydimethylsiloxane/silver nanowires/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) via a water-assisted peeling method are presented, both of which possess excellent optoelectrical properties and robust mechanical flexibility. The Fa-TPLEDs are constructed by spin-coating functional layers on the bottom reflective cathodes and laminating the top transparent anodes. The Fa-TPLEDs show a current efficiency of 16.3 cd A-1 , an external quantum efficiency of 4.9% and angle-independent electroluminescence spectra. In addition, the Fa-TPLEDs possess excellent mechanical stability, maintaining a current efficiency of 14.3 cd A-1 after 200 bending cycles at a radius of 4 mm. The results demonstrate that the integration of solution-processed reflective cathodes and transparent anodes sheds light on a new avenue to construct low-cost and efficient fabric-based devices, showing great potential applications in emerging smart flexible/wearable electronics.

Single-Component Color-Tunable Smart Organic Emitters with Simultaneous Multistage Stimuli-Responsiveness and Multimode Emissions.

Achieving color-tunable emission in single-component organic emitters with multistage stimuli-responsiveness is of vital significance for intelligent optoelectronic applications, but remains enormously challenging. Herein, we present an unprecedented example of a color-tunable single-component smart organic emitter (DDOP) that simultaneously exhibits multistage stimuli-responsiveness and multimode emissions. DDOP based on a highly twisted amide-bridged donor-acceptor-donor structure has been found to facilitate intersystem crossing, form multimode emissions, and generate multiple emissive species with multistage stimuli-responsiveness. DDOP pristine crystalline powders exhibit abnormal excitation-dependent emissions from a monomer-dominated blue emission centered at 470 nm to a dimer-dominated yellow emission centered at 550 nm through decreasing the ultraviolet (UV) excitation wavelengths, whereas DDOP single crystals show a wide emission band with a main emission peak at 585 nm when excited at different wavelengths. The emission behaviors of pristine crystalline powders and single crystals are different, demonstrating emission features that are closely related to the aggregation states. The work has developed color-tunable single-component organic emitters with simultaneous multistage stimuli-responsiveness and multimode emissions, which is vital for expanding intelligent optoelectronic applications, including multilevel information encryption, multicolor emissive patterns, and visual monitoring of UV wavelengths.

A Polyzwitterion-Mediated Polymer Electrolyte with High Oxidative Stability for Lithium-Metal Batteries.

To achieve high-performance solid-state lithium-metal batteries (SSLMBs), solid electrolytes with high ionic conductivity, high oxidative stability, and high mechanical strength are necessary. However, balancing these characteristics remains dramatically challenging and is still not well addressed. Herein, a simple yet effective design strategy is presented for the development of high-performance polymer electrolytes (PEs) by exploring the synergistic effect between dynamic H-bonded networks and conductive zwitterionic nanochannels. Multiple weak intermolecular interactions along with ample nanochannels lead to high oxidative stability (over 5 V), improved mechanical properties (strain of 1320%), and fast ion transport (ionic conductivity of 10-4 S cm-1 ) of PEs. The amphoteric ionic functional units also effectively regulate the lithium ion distribution and confine the anion transport to achieve uniform lithium ion deposition. As a result, the assembled SSLMBs exhibit excellent capacity retention and long-term cycle stability (average Coulombic efficiency: 99.5%, >1000 cycles with LiFePO4 cathode; initial capacity: 202 mAh g-1 , average Coulombic efficiency: 96%, >230 cycles with LiNi0.8 Co0.1 Mn0.1 O2 cathode). It is exciting to note that the corresponding flexible cells can be cycled stably and can withstand severe deformation. The resulting polyzwitterion-mediated PE therefore offers great promise for the next-generation safe and high-energy-density flexible energy storage devices.

Improved electroluminescence efficiency derived from functionalized decoration of 1,3,4-oxadiazole (OXD)-based Ir(III) complexes.

The performance of organic light emitting devices (OLEDs) fabricated using Ir(III) complexes bearing 1,3,4-oxadiazole (OXD)-based cyclometallic ligands still needs to be improved. In this work, Ir3+ was coordinated with a 2-(9,9-diethyl-9H-fluoren-2-yl)-1,3,4-oxadiazole (F-OXD) fragment, which was modified with various functionalized substituents, including fluorenyl, OXD and carbazolyl groups. Three complexes, named Ir-Flu, Ir-OXD and Ir-Cz, were synthesized successfully and their photophysical, electrochemical and electroluminescence properties were investigated in detail. All these complexes exhibited yellow-orange emission in solution and a distinct aggregation-induced phosphorescent emission (AIPE) phenomenon was observed. Monochrome OLEDs were fabricated using these phosphorescent dopants, and the turn-on voltage (V), luminance (L) and current efficiency (CE) showed significant improvement compared to analogous OXD-based Ir(III) complexes reported before. In particular, the device with Ir-OXD as the dopant achieved the highest maximum brightness of 25 014 cd m-2 and the lowest efficiency roll-off (42.6%) at the maximum luminance among all the devices. These results provided a proven strategy of functionalized decoration of OXD-based complexes to achieve superior luminous efficiency devices.

Intrinsically Stretchable Electroluminescent Elastomers with Self-Confinement Effect for Highly Efficient Non-Blended Stretchable OLEDs.

Ultra-flexible stretchable organic light-emitting diodes (OLEDs) are emerging as a basic component of flexible electronics and human-machine interfaces. However, the brightness and efficiency of stretchable OLEDs remain still far inferior to their rigid counterparts, owing to the scarcity of satisfactory stretchable electroluminescent materials. Herein, we explore a general concept based on the self-confinement effect to dramatically improve the stretchability of elastomers, without affecting electroluminescent properties. The balanced rigid/flexible chain dynamics under self-confinement significantly reduces the modulus of the elastomers, resulting in the maximum strain reaching 806 %. Ultra-flexible stretchable OLEDs have been constructed based on the resulting ISEEs, achieving unprecedented high-performance non-blended stretchable OLEDs. The results suggest an effective molecular design strategy for highly deformable stretchable displays and flexible electronics.

Constructing Lithium-Free Anode/Separator Interface via 3D Carbon Fabric Scaffold for Ultrasafe Lithium Metal Batteries.

Metallic lithium represents a promising anode candidate to be utilized in future high-energy lithium batteries. However, the undesirable dendrite growth and fragile solid-electrolyte interphase (SEI) pose critical challenge for pursuing further practical application. In contrast to traditional approaches of using inert/lithiophilicity coating, here, we demonstrate a reverse strategy of introducing a highly conductive and lithophobic carbon fabric (CF) scaffold on lithium foil to guide a favorable nucleation site of lithium far away from the anode/separator interface. The CF scaffold with high conductivity can couple with inner electric field for achieving a uniform distribution of the lithium-ion flux, while the lithophobic feature offers the condition to guide the preferred deposition of lithium onto the underlying lithium foil, which greatly reduces the risk of dendrite-induced short circuits. Moreover, the SEI immersed in the CF scaffold is well supported by CF fibers and therefore exhibits extremely high stability during charge-discharge cycles. As a result, the lithium/CF anodes show >2,000-h stable cycling at 0.5 mA cm-2. Lithium metal batteries equipped with our lithium/CF anode deliver a high capacity retention of ~99.99% per cycle, i.e., retain ~97.3% capacity after 200 cycles. The unique interface-regulation strategy is versatile for various conductive scaffolds (e.g., ultrathin and ultralight conductive fabrics), exhibiting high superiority for highly safe lithium metal batteries.

Stable Ultrathin Ag Electrodes by Tailoring the Surface of Plastic Substrates for Flexible Organic Light-Emitting Devices.

Flexible transparent metal electrodes (FTMEs) have significant application potentials in the fields of flexible optoelectronic devices due to their outstanding optical transmittance and electrical conductivity. However, obtaining excellent optoelectrical properties and mechanical flexibility of FTMEs is challenging because ultrathin metal layers usually follow an island growth mode. In this paper, flexible transparent ultrathin Ag electrodes with high mechanical stability and good optoelectrical properties were exploited by tailoring the surface properties of plastic substrates with ultraviolet-ozone (UVO) treatment for regulating the nucleation and growth kinetics of Ag films. The composite transparent electrodes of Ag (9 nm)/MoO3 (20 nm) fabricated on the UVO-treated polyethylene terephthalate (PET) substrates possess a low sheet resistance of ∼7.9 Ω/sq, a high optical transmittance of ∼87.2% at 550 nm, a long-period environmental stability of 30 days (∼65 °C, ∼80% humidity), and excellent mechanical flexibility of 100,000 bending cycles at a bending radius of 1.5 mm. These properties are derived from the surface treatment of PET substrates by UVO, which increases substrate surface energy and produces chemical nucleation sites of the phenolic hydroxyl groups. The phenolic hydroxyl groups generated on the PET surface not only provided efficient nucleation sites for subsequent Ag film growth but also formed C-O-Ag bonds between the substrate surface and the Ag layer, which act as "anchor chains" to fix firmly the Ag atoms on the substrate surface. As a universal applicability strategy, the composite electrodes on the UVO-treated polyethylene naphthalate (PEN) and norland optical adhesive 63 (NOA63) substrates also possess excellent optoelectrical properties and mechanical flexibility. Based on the ultrathin Ag composite electrodes, the flexible white organic light-emitting devices with PET, PEN, and NOA63 as substrates present the maximum current efficiencies of 53.0, 77.0, and 65.2 cd/A, respectively.

Wireless Human-Machine Interface Based on Artificial Bionic Skin with Damage Reconfiguration and Multisensing Capabilities.

Human-machine interfaces (HMIs) enable users to interact with machines, thus playing a significant role in artificial intelligence, virtual reality, and the metaverse. Conventional HMIs are based on bulky and rigid electronic devices, seriously limiting their ductility, damage reconfiguration, and multifunctionality. In terms of replacing conventional HMIs, artificial bionic skins with good ductility, self-reparation, and multisensory ability are promising candidates. Still, they in their present form require innovations in mechanical and sensory properties, especially damage recovery and environmental stability, which seriously affect the service life and result in tons of electric waste. Herein, we present a new type of artificial bionic skin with excellent mechanical performance (>13,000% strain), high environmental stability (-80 to 80 °C), and multiple sensory properties toward strain, stress, temperature, solvent, and bioelectricity. Besides, this new type of artificial bionic skin also exhibits effective reconfiguration ability after damage and recyclability. The as-prepared artificial bionic skin was used as an interactive HMI to collect and distinguish the different sensory stimuli. The electronics assembled by HMI with artificial bionic skin can adhere compliantly on the human body for wireless motion capturing and sensing via Bluetooth, Wi-Fi, and the Internet. With simple programming, complex human motions can be mimicked in real-time by robots.

Tuning the Circularly Polarized Luminescence of Supramolecules via Self-Assembly Morphology Control.

Tuning the circularly polarized luminescence (CPL) is a paramount yet challenging issue in the research field of chiral materials. Here, the chiral supramolecules were constructed with a chiral inducer LL-diphenylalanine (LPFF) and a triphenyl-1,3,5-triazine-derived achiral molecule (DMAC-TRZ) to generate differentiated aggregates, giving rise to tunable responses of CPL. Specifically, the well-defined supercrystallines had an exceptional superior CPL emission located at 485 nm with a large luminescence dissymmetry factor (glum) value as high as +0.16, whereas the formed organic gel possessed a relatively strong CPL emission peaked at 495 nm with a glum value of -0.04 in respect to the water fraction about 50%. The distinguished glum value was assigned to the choice of spatial arrangement of the π-chromophores of DMAC-TRZ responding to the volume water fraction in the H2O/DMSO system, resulting in a tunable glum value. This strategy provides an efficient way to regulate CPL signals by modulating the π-stacking way of organic materials responding to external stimuli.

Highly Stable Silver Nanowires/Biomaterial Transparent Electrodes for Flexible Electronics.

Flexible transparent electrodes (FTEs) possess excellent optoelectrical properties, mechanical robustness, and environmental adaptability are important for the industrial scale development of flexible electronics. Silver nanowires (AgNWs) are widely used in FTEs owing to their excellent optoelectrical properties and mechanical flexibility. However, the high surface roughness and poor stability of AgNWs FTEs still limit their practical applications. Here, highly stable FTEs are demonstrated via combining AgNWs and biomaterial propolis which is eco-friendly and antioxidative. The AgNWs/propolis composite transparent electrodes exhibit excellent optoelectrical performance as well as a smooth surface (root-mean-square roughness ∼ 6.2 nm). Meanwhile, the composite electrodes possess high mechanical stability (10,000 bending cycles), thermal stability, and environmental adaptability (60 °C and 85 ± 3% humidity for 700 h). The versatile composite FTEs show great potential applications in organic light-emitting diodes and pressure sensors, which exhibit high performance, mechanical stability, and environmental adaptability. Our strategy of introducing biocompatible materials into metallic nanowires opens up new possibilities to achieve high-quality FTEs in a simple and eco-friendly way.

Discriminating Chiral Supramolecular Motions by Circularly Polarized Luminescence.

Molecular motions are closely associated with the behaviors and properties of organic materials. However, monitoring molecular motions is challenging. Herein, a chiral supramolecular system consisting of L-/D-phenylalanine (LPF/DPF) as a chiral inducer and an achiral tetraphenylethene derivative (TPEF) as a molecular rotor has been proposed and explored for real-time discriminating the supramolecular motions by the visualization of circularly polarized luminescence (CPL) signal variations. Derived from the ordered molecular motions of TPEF induced by LPF/DPF, highly organized aggregates have been progressively assembled in a controlled manner with differentiated morphologies, including spherical particles, one-dimensional fibers, and floor-shaped supercrystals. Notably, increasing level of ordered aggregates, in turn, led to quenching emissions, while the CPL signals have been dramatically amplified accompanying by a sharp enhancement of luminescence dissymmetry factors (glum ) from nearly 0 to -0.1. The significant amplification of CPL is attributed to the ordered aggregates of supramolecules, leading to the decrease of electric transition dipole moments in supramolecular system. As a result of the chiral supramolecular motions powered by supramolecular crystallization, the supramolecular motions are conveniently discriminated by visual CPL signal variation with an enhancement of glum value from 0 to -0.1 in real time.

Advanced Current Collector Materials for High-Performance Lithium Metal Anodes.

Lithium metal, as the "Holy Grail" of lithium battery anodes, is promising to be used in the next-generation of high-energy-density storage devices. However, serious safety risk and poor cycle performance are inevitable when bare lithium foil is used as the anode material, due to the uncontrolled growth of lithium dendrites, unstable solid electrolyte interface, and infinite volume expansion of lithium during cycling, which largely hinder the further commercial application of lithium metal batteries (LMBs). The utilization of up-to-date current collectors with specific composition and structure is believed to be effective to overcome these shortcomings. However, a systematic evaluation of the merit of different current collector materials for realizing high-performance lithium metal anodes is still lacking. This review summarizes the fashionable advanced current collector materials for long-life LMBs in recent years. The superiorities and related electrochemical performances by using these current collector materials are discussed in detail. It is expected that this review may promote the rational choice of appreciatory current collector materials with unique structure designs to extend the cycle life of lithium metal anodes for achieving the next-generation of high-energy-density LMBs.

Porous organic polymers for high-performance supercapacitors.

With the aim of addressing the global warming issue and fossil energy shortage, eco-friendly and sustainable renewable energy technologies are urgently needed. In comparison to energy conversion, studies on energy storage fall behind and remain largely to be explored. By storing energy from electrochemical processes at the electrode surface, supercapacitors (SCs) bridge the performance gap between electrostatic double-layer capacitors and batteries. Organic electrode materials have drawn extensive attention because of their special power density, good round trip efficiency and excellent cycle stability. Porous organic polymers (POPs) have drawn extensive attention as attractive electrode materials in SCs. In this review, we present and discuss recent advancements and design principles of POPs as efficient electrode materials for SCs from the perspectives of synthetic strategies and the structure-performance relationships of POPs. Finally, we put forward the outlook and prospects of POPs for SCs.

(4,5,8)-Connected Cationic Coordination Polymer Material as Explosive Chemosensor Based on the in Situ Generated AIE Tetrazolyl-Tetraphenylethylene Derivative.

A multidentate tetrazole molecule based on a TPE core, tetrakis[4-(1H-tetrazol-5-yl)phenyl]ethylene (H4ttpe) with combined advantages of two functional groups, was synthesized by cycloaddition reaction of the corresponding organic benzonitrile derivative and azide salt. Coordination self-assembly of the in situ formed aggregation-induced emission polytetrazole luminogen with cadmium(II) ion produces an unprecedented tetrazolyl-TPE-based microporous cationic metal-organic framework (MOF) with an unusual (4,5,8T14)-connected net of {[Cd4(H4ttpe)2Cl5]·(N3)3}, in which the H4ttpe serves as the first undeprotonated tetrazole ligand of octa-coordinating bridging mode. We investigate, for the first time, the utilization of the luminescent MOF containing a TPE core decorated with tetrazolyl terminals for explosive detection based on the change in fluorescence intensity, which shows high selectivity and efficiency in fluorescence quenching toward TNP detection in water solution.

Highly Efficient Inverted Organic Light-Emitting Diodes Adopting a Self-Assembled Modification Layer.

Inverted organic light-emitting diodes (IOLEDs) can be integrated with low-cost n-channel thin-film transistors for use in active-matrix OLEDs (AMOLEDs). However, the electron injection from conventional indium tin oxide (ITO) cathode to the upper electron transport layer usually suffers from a large injection barrier. To improve the electron injection efficiency, the electron injection layers (EILs) of ZnO modified by a self-assembled monolayer arginine (Arg) were developed to construct efficient IOLEDs. ZnO/Arg EILs present an ultralow work function (WF) of 2.35 eV, which is lower than that of ZnO modified by poly(ethylenimine) (PEI) (2.77 eV). The mechanism of low WF is attributed to the generation of strong molecular dipoles and interface dipoles at the interface of ZnO/Arg. The green fluorescent IOLEDs with ZnO/Arg present a low turn-on voltage (Von) of 3.5 V and a maximum current efficiency (CEmax) of 4.5 cd/A. Especially, the device possesses a half-life of 3600 h at an initial luminance of 1700 cd/m2, which is 36 times as long as that of the IOLEDs with ZnO/PEI as EILs. Furthermore, the green phosphorescent IOLEDs show a Von of 3.5 V, a CEmax of 59.1 cd/A, and a maximum external quantum efficiency (EQEmax) of 16.8%. At a luminance of 10 000 cd/m2, the efficiency roll-off of the device is only 6.3%.

Frequency-Upconverted Stimulated Emission by Up to Six-Photon Excitation from Highly Extended Spiro-Fused Ladder-Type Oligo(p-phenylene)s.

Frequency-upconverted fluorescence and stimulated emission induced by multiphoton absorption (MPA) have attracted much interest. As compared with low-order MPA processes, the construction of high-order MPA processes is highly desirable and rather attractive, yet remains a formidable challenge due to its inherent low transition probability. We report the observation of the first experimental frequency-upconverted fluorescence and stimulated emission by simultaneous six-photon excitation in an organic molecular system. The well-designed organic conjugated system based on cross-shaped spiro-fused ladder-type oligo(p-phenylene)s (SpL-z, z=1-3) manifests reasonably high MPA cross-sections and brilliant luminescence emission simultaneously. The six-photon absorption cross-section of SpL-3 with an extended π-conjugation was evaluated as 8.67×10-169  cm12 s5 photon-5 . Exceptionally efficient 2- to 6-photon excited stimulated emission was achieved under near-infrared laser excitation.

Self-templated synthesis of uniform hollow spheres based on highly conjugated three-dimensional covalent organic frameworks.

Covalent organic frameworks (COFs) have served as a family of porous crystalline molecules for various promising applications. However, controllable synthesis of COFs with uniform morphology is paramount yet still remains quite challenging. Herein, we report self-templated synthesis of uniform and unique hollow spheres based on highly conjugated three-dimensional (3D) COFs with diameters of 500-700 nm. A detailed time-dependent study reveals the continuous transformation from initial nano sphere-like particles into uniform hollow spherical structures with Ostwald ripening mechanism. Particularly, the resulting 3D COF (3D-Sp-COF) is prone to transport ions more efficiently and the lithium-ion transference number (t+) of 3D-Sp-COF reaches 0.7, which even overwhelms most typical PEO-based polymer electrolytes. Inspiringly, the hollow spherical structures show enhanced capacitance performance with a specific capacitance of 251 F g-1 at 0.5 A g-1, which compares favorably with the vast majority of two-dimensional COFs and other porous electrode materials.