RESUMEN
The new hydrazine 5H-dibenzo[b,f]azepin-5-amine (2) reacts with P- and Si-electrophiles via deprotonation to afford P(III)-, P(V)-, and TMS-hydrazides 3-8 and with carbonyl electrophiles via acid-free condensation to the N-substituted hydrazones 9-12 that are potential N-alkene ligands. While ß-ketohydrazone 9 and α-dihydrazone 10 react with [Mes(Cu)]4, [Cu(NCCCH3)4]2PF6, and FeCl2(THF)1.5 to afford complexes devoid of alkene interaction, [Cu(OTf)]2·C6H6 reacts with the α-keto hydrazone 11 or with N,N dimethyl-hydrazone 12 to form the neutral dimeric Cu(I) complex 18 with bridging Cu(I)-alkene interactions or the tetrahedral cationic complex 19 in which 12 binds as a bidentate hydrazone-alkene ligand, respectively. The surprising stability of the alkene coordination in complexes 18 and 19 prevents substitutions with, e.g., PPh3.
RESUMEN
Inverse sandwich complexes of Yb and Sm stabilized by a bulky ß-diketiminate (BDI) ligand have been prepared: (BDI)Ln(η6,η6-C6H6)Ln(BDI); Ln=lanthanide. Coordinated benzene ligands can be neutral, di-anionic or, often controversially discussed, even tetra-anionic. The formal charge on benzene is correlated to assignment of the metal oxidation state which generally poses a problem. Herein, we take advantage of the structural similarities found when comparing CaII with YbII, and SrII with SmII complexes. In this work, we found an excellent overlap of the Ca/Yb inverse sandwich structures but a striking difference for the Sr/Sm pair. The much shorter Sm-N and Sm-C6H6 distances are strong evidence for a SmIII-benzene-4-SmIII assignment. This was further supported by NMR spectroscopy, magnetic susceptibility, reactivity and comprehensive computational investigation.
RESUMEN
The chemistry of extremely bulky amide ligands is troubled by difficulties in deprotonation of the parent amine. As an alternative route to superbulky amide reagents, the addition of polar reagents to a sila-imine has been investigated. Attempts to synthesize the superbulky amide anion (tBu3Si)2N- by addition of tBuLi to tBu2Si=N(SitBu3) failed and gave tBu3Si(tBu2HSi)NLi and isobutene. Reaction of the sila-imine with KOtBu successfully led to tBu3Si[tBu2(tBuO)Si]NK which crystallized as a separated ion-pair. Reaction with the slightly bulkier KOAd (Ad=1-adamantyl) led in presence of THF to ether ring-opening. Reaction with tBuOH gave tBu3Si[tBu2(tBuO)Si]NH but this amine cannot be easily deprotonated. Reaction with (BDI*)MgnBu in presence of THF gave (BDI*)Mg+ â (THF)2 and the non-coordinating anion tBu3Si[tBu2(nBu)Si]N-; BDI*=ß-diketiminate ligand HC[C(tBu)N-DIPP]2, DIPP=2,6-diisopropylphenyl. Reaction of Mg(nBu)2 with tBu2Si=N(SitBu3) led to a Mg complex with one amide ligand: tBu3Si[tBu2(nBu)Si]N-. The other superbulky amide anion isomerized by internal deprotonation of a tBu-substituent to give a primary carbanion that is also coordinated to Mg. Although the amide-to-carbanion isomerization is highly contrathermodynamic, it allows for coordination of both anions to a single Mg center. The new bulky amides are rare cases of halogen-free weakly coordinating anions.
RESUMEN
Sterically hindered amide anions have found widespread application as deprotonation agents or as ligands to stabilize metals in unusual coordination geometries or oxidation states. The use of bulky amides has also been advantageous in catalyst design. Herein we present s-block metal chemistry with one of the bulkiest known amide ligands: (tBu3Si)2N- (abbreviated: tBuN-). The parent amine (tBuNH), introduced earlier by Wiberg, is extremely resistant to deprotonation (even with nBuLi/KOtBu superbases) but can be deprotonated slowly with a blue Cs+/e- electride formed by addition of Cs0 to THF. (tBuN)Cs crystallized as a separated ion-pair, even without cocrystallized solvent. As salt-metathesis reactions with (tBuN)Cs are sluggish and incomplete, it has only limited use as an amide transfer reagent. However, ball-milling with LiI led to quantitative formation of (tBuN)Li and CsI. Structural characterization shows that (tBuN)Li is a monomeric contact ion-pair with a relatively short N-Li bond, an unusual T-shaped coordination geometry around N and extremely short Liâ¯Me anagostic interactions. Crystal structures are compared with Li and Cs complexes of less bulky amide ligands (iPr3Si)2N- (iPrN-) and (Me3Si)2N- (MeN-). DFT calculations show trends in the geometries and electron distributions of amide ligands of increasing steric bulk (MeN- < iPrN- < tBuN-) and confirm that tBuN- is a rare example of a halogen-free weakly coordinating anion.
RESUMEN
The zinc complexes of chloroquine (CQ; [Zn(CQH+)Cl3]) and hydroxychloroquine (HO-CQ; [Zn(HO-CQH+)Cl3]) were synthesized and characterized by X-Ray structure analysis, FT-IR, NMR, UV-Vis spectroscopy, and cryo-spray mass spectrometry in solid state as well as in aqueous and organic solvent solutions, respectively. In acetonitrile, up to two Zn2+ ions bind to CQ and HO-CQ through the tertiary amine and aromatic nitrogen atoms (KN-aminCQâ¯=â¯(3.8⯱â¯0.5) x 104â¯M-1 and KN-aromCQâ¯=â¯(9.0⯱â¯0.7) x 103â¯M-1 for CQ, and KN-aminHO-CQâ¯=â¯(3.3⯱â¯0.4) x 104â¯M-1 and KN-aromHO-CQâ¯=â¯(1.6⯱â¯0.2) x 103â¯M-1 for HO-CQ). In MOPS buffer (pHâ¯7.4) the coordination proceeds through the partially deprotonated aromatic nitrogen, with the corresponding equilibrium constants of KN-arom(aq)CQâ¯=â¯(3.9⯱â¯1.9) x 103â¯M-1and KN-arom(aq)HO-CQâ¯=â¯(0.7â¯+â¯0.4) x 103â¯M-1 for CQ and HO-CQ, respectively. An apparent partition coefficient of 0.22 was found for [Zn(CQH+)Cl3]. Mouse embryonic fibroblast (MEF) cells were treated with pre-synthesized [Zn((HO-)CQH+)Cl3] complexes and corresponding ZnCl2/(HO-)CQ mixtures and zinc uptake was determined by application of the fluorescence probe and ICP-OES measurements. Administration of pre-synthesized complexes led to higher total zinc levels than those obtained upon administration of the related zinc/(hydroxy)chloroquine mixtures. The differences in the zinc uptake between these two types of formulations were discussed in terms of different speciation and character of the complexes. The obtained results suggest that intact zinc complexes may exhibit biological effects distinct from that of the related zinc/ligand mixtures.
Asunto(s)
Cloroquina , Complejos de Coordinación , Animales , Ratones , Cloroquina/farmacología , Cloroquina/química , Hidroxicloroquina , Zinc/química , Espectroscopía Infrarroja por Transformada de Fourier , Fibroblastos , Nitrógeno , Complejos de Coordinación/químicaRESUMEN
More than a century old, magnesium Grignard reagents remain essential to the toolbox of organic chemists. Although similar reagents with the neighbouring group 2 metal Ca have been explored, the considerably higher polarity and reactivity of the Ca-C bond result in undesired decomposition pathways. Ca Grignard reagents have found academic interest but have never fully developed into an established synthetic tool. Recent research activities, however, provide facile access to these highly reactive organocalcium species, including in situ preparation and ball milling approaches to tackle the challenge of controlling their extreme sensitivity. Heavier Grignard reagents are not just more reactive but profit from unique chemical transformations. Insight into the transition metal-like properties of Ca, Sr and Ba is only just emerging. Considering the rapidly developing field of alkaline-earth metal-mediated catalysis, heavy Grignard reagents will probably have a bright future.
RESUMEN
Cu(I)-Hydrido complexes supported by dibenzo[b,f]azepinyl P-alkene hybrid ligands and stabilized by electrostatic interactions in a Cu-Hâ¯KClâ¯BR3 arrangement can be trapped with CO2 at low temperature to afford Cu(I)-formates. The complexes are isolable with and without a pendant BEt3 group and show strong Cu-O and weak B-O interactions.
RESUMEN
Inversion barriers ΔG for planar chiral phosphine-alkene and sulfonamide-alkene hybrid ligands based on phenyl-dibenz[b,f]azepine have been determined by density-functional theory calculations. Analysis of the structural and electronic characteristics of the minima and transition states explains the magnitudes of ΔG and the geometrical changes during the inversion process. The steric repulsion caused by bulky substituents attached to the azepine nitrogen atom has a pronounced effect on the ΔG value, explaining, inter alia, the stereochemical stability of the P- and S-alkene ligands when compared to the fluxional parent compound where X = H.
RESUMEN
Alkene planar chirality is introduced in the 'privileged' P-alkene phosphoramidite ligand 1. The resulting diastereomeric ligands (pR,R)-5 and (pS,R)-5 form optically pure complexes of Rh(I) and Pd(II), which catalyze conjugate additions of boron C-nucleophiles to enones and allylic alkylations, respectively. In the Rh-catalyzed reaction, the planar chirality of the alkene exerts absolute enantiocontrol over the potent BINOL auxiliary.
RESUMEN
DFT-Calculations predict that a low-valent complex (BDI)Mg-Ca(BDI) with bulky ß-diketiminate (BDI) ligands is thermodynamically stable. It was attempted to isolate such a complex by salt-metathesis between [(DIPePBDI*)Mg-Na+]2 and [(DIPePBDI)CaI]2 (DIPePBDI = HC[C(Me)N-DIPeP]2; DIPePBDI* = HC[C(tBu)N-DIPeP]2; DIPeP = 2,6-CH(Et)2-phenyl). Whereas in alkane solvents no reaction was observed, salt-metathesis in C6H6 led to immediate C-H activation of benzene to give (DIPePBDI*)MgPh and (DIPePBDI)CaH, the latter crystallizing as a THF-solvated dimer [(DIPePBDI)CaH·THF]2. Calculations suggest reduction and insertion of benzene in the Mg-Ca bond. The activation enthalpy for the subsequent decomposition of C6H62- into Ph- and H- is only 14.4 kcal mol-1. Repeating this reaction in the presence of naphthalene or anthracene led to heterobimetallic complexes in which naphthalene2- or anthracene2- anions are sandwiched between (DIPePBDI*)Mg+ and (DIPePBDI)Ca+ cations. These complexes slowly decompose to their homometallic counterparts and further decomposition products. Complexes in which naphthalene2- or anthracene2- anions are sandwiched between two (DIPePBDI)Ca+ cations were isolated. The low-valent complex (DIPePBDI*)Mg-Ca(DIPePBDI) could not be isolated due to its high reactivity. There is, however, strong evidence that this heterobimetallic compound is a fleeting intermediate.
RESUMEN
Alkenes that normally do not react with LiAlH4 (3-hexene, cyclohexene, 1-Me-cyclohexene), can be reduced to the corresponding alkanes by a mixture of LiAlH4 and Fe0 (the iron was activated by Metal-Vapour-Synthesis). This alkene-to-alkane conversion with a stoichiometric quantity of LiAlH4 /Fe0 does not need quenching with water or acids, implying that both H's originate from LiAlH4 . The LiAlH4 /Fe0 combination is also a remarkably potent cooperative catalyst for hydrogenation of multi-substituted alkenes and benzene or toluene. An induction period of circa two hours and the minimally required temperature of 120 °C, suggests that the actual catalyst is a combination of Fe0 and the decomposition product of LiAlH4 (LiH and Al0 ). A thermally pre-activated LiAlH4 /Fe0 catalyst did not need an induction time and is also active at room temperature and 1â bar H2 . A combination of AliBu3 and Fe0 is an even more active hydrogenation catalyst. Without pre-activation, tetra-substituted alkenes like Me2 C=CMe2 and toluene could be fully hydrogenated.
RESUMEN
Complex [(DIPeP BDI)Ca]2 (C6 H6 ), with a C6 H6 2- dianion bridging two Ca2+ ions, reacts with benzene to yield [(DIPeP BDI)Ca]2 (biphenyl) with a bridging biphenyl2- dianion (DIPeP BDI=HC[C(Me)N-DIPeP]2 ; DIPeP=2,6-CH(Et)2 -phenyl). The biphenyl complex was also prepared by reacting [(DIPeP BDI)Ca]2 (C6 H6 ) with biphenyl or by reduction of [(DIPeP BDI)CaI]2 with KC8 in presence of biphenyl. Benzene-benzene coupling was also observed when the deep purple product of ball-milling [(DIPP BDI)CaI(THF)]2 with K/KI was extracted with benzene (DIPP=2,6-CH(Me)2 -phenyl) giving crystalline [(DIPP BDI)Ca(THF)]2 (biphenyl) (52 % yield). Reduction of [(DIPeP BDI)SrI]2 with KC8 gave highly labile [(DIPeP BDI)Sr]2 (C6 H6 ) as a black powder (61 % yield) which reacts rapidly and selectively with benzene to [(DIPeP BDI)Sr]2 (biphenyl). DFT calculations show that the most likely route for biphenyl formation is a pathway in which the C6 H6 2- dianion attacks neutral benzene. This is facilitated by metal-benzene coordination.
RESUMEN
The previously reported potassium aluminyl complex [(BDI-H)Al-K+]2 was converted in Li+ or Na+ salts by a salt metathesis reaction with Li(BPh4) or Na(BPh4), respectively; BDI-H = dianionic [(DIPP)N-C(Me)îC(H)-C(îCH2)-N(DIPP)2-] and DIPP = 2,6-diisopropylphenyl. The Rb and Cs aluminyl complexes were obtained by reaction of (BDI)Al with RbC8 or CsC8; BDI = HC[C(Me)N(DIPP)]2. Crystal structures of two monomers, (BDI-H)Al-Li+·(Et2O)2 and (BDI-H)Al-Na+·(Et2O)(TMEDA), and four dimers [(BDI-H)Al-M+]2 (M = Li, Na, Rb, Cs) are discussed. Lewis base-free dimers [(BDI-H)Al-M+]2 crystallize either as slipped dimers (Li+, Na+) in which each Al center features only one Al-M contact or as a symmetric dimer (K+, Rb+, Cs+) in which the cation bridges both Al centers. The dimer with the largest cation (Cs+) shows Csâ¯CH2îC interactions between dimers, resulting in a coordination polymer. AIM and charge analysis reveal highly ionic Al-M bonds with strong polarization of the Al lone-pair towards the smaller cation Li+ and Na+. The Al-M bonds become weaker from Li to Cs. Calculated dimerization energies suggest that in apolar solvents only complexes with the heavier metals Rb and Cs may be in a monomer-dimer equilibrium. This is confirmed by DOSY measurements in benzene. Dimeric aluminyl complexes with heavier alkali metals (K-Cs) react with benzene to give a double C-H activation in para-positions.
RESUMEN
In order to isolate a monometallic Mg radical, the precursor (Am)MgIâ (CAAC) (1) was prepared (Am=tBuC(N-DIPP)2 , DIPP=2,6-diisopropylphenyl, CAAC=cyclic (alkyl)(amino)carbene). Reduction of a solution of 1 in toluene with the reducing agent K/KI led to formation of a deep purple complex that rapidly decomposed. Ball-milling of 1 with K/KI gave the low-valent MgI complex (Am)Mgâ (CAAC) (2) which after rapid extraction with pentane and crystallization was isolated in 15 % yield. Although a benzene solution of 2 decomposes rapidly to give Mg(Am)2 (3) and unidentified products, the radical is stable in the solid state. Its crystal structure shows planar trigonal coordination at Mg. The extremely short Mg-C distance of 2.056(2)â Å indicates strong Mg-CAAC bonding. Calculations and EPR measurements show that most of the spin density is in a π* orbital located at the C-N bond in CAAC, leading to significant C-N bond elongation. This is supported by calculated NPA charges in 2: Mg +1.73, CAAC -0.82. Similar metal-to-CAAC charge transfer was calculated for M0 (CAAC)2 and [MI (CAAC)2 + ] (M=Be, Mg, Ca) complexes in which the metal charges range from +1.50 to +1.70. Although the spin density of the radical is mainly located at the CAAC ligand, complex 2 reacts as a low-valent MgI complex: reaction with a I2 solution in toluene gave (Am)MgIâ (CAAC) (1) as the major product.
RESUMEN
Oxidative addition of 1.5 equiv of bromine or iodine to a Ir(I) sulfoxide pincer complex affords the corresponding Ir(IV) tris-bromido or tris-iodido complexes, respectively. The unprecedented trap-free reductive elimination of iodine from the Ir(IV)-iodido complex is induced by coordination of ligands or donor solvents. In the case of added I-, the isostructural tris-iodo Ir(III)-ate complex is quickly generated, which then can be readily reoxidized to the Ir(IV)-iodido complex with FcPF6 or electrochemically. DFT calculations indicate an "inverted ligand field" in the Ir(IV) complexes and favor dinuclear pathways for the reductive elimination of iodine from the formal d5 metal center.
RESUMEN
Low-valent (Me BDI)Al and (Me BDI)Ga and highly Lewis acidic cations in [(tBu BDI)M+ â C6 H6 ][(B(C6 F5 )4 - ] (M=Mg or Zn, Me BDI=HC[C(Me)N-DIPP]2 , tBu BDI=HC[C(tBu)N-DIPP]2 , DIPP=2,6-diisopropylphenyl) react to heterobimetallic cations [(tBu BDI)Mg-Al(Me BDI)+ ], [(tBu BDI)Mg-Ga(Me BDI)+ ] and [(tBu BDI)Zn-Ga(Me BDI)+ ]. These cations feature long Mg-Al (or Ga) bonds while the Zn-Ga bond is short. The [(tBu BDI)Zn-Al(Me BDI)+ ] cation was not formed. Combined AIM and charge calculations suggest that the metal-metal bonds to Zn are considerably more covalent, whereas those to Mg should be described as weak AlI (or GaI )âMg2+ donor bonds. Failure to isolate the Zn-Al combination originates from cleavage of the C-F bond in the solvent fluorobenzene to give (tBu BDI)ZnPh and (Me BDI)AlF+ which is extremely Lewis acidic and was not observed, but (Me BDI)Al(F)-(µ-F)-(F)Al(Me BDI)+ was verified by X-ray diffraction. DFT calculations show that the remarkably facile C-F bond cleavage follows a dearomatization/rearomatization route.
RESUMEN
First evidence for the coordination of norbornadiene (nbd) and dicyclopentadiene (dcpd) with the main group metal Mg is provided by the crystal structures of adducts with cationic ß-diketiminate (BDI) Mg complexes. While the dcpd complex is thermally stable, [(BDI)Mg+·nbd][B(C6F5)4-] shows slow room temperature retro-Diels-Alder decomposition to give a complex with the cation (BDI)Mg(C5H5)Mg(BDI)+.
RESUMEN
Strongly Lewis acidic cationic aluminium complexes, stabilized by ß-diketiminate (BDI) ligands and free of Lewis bases, have been prepared as their B(C6 F5 )4 - salts and were investigated for catalytic activity in imine hydrogenation. The backbone (R1) and N (R2) substituents on the R1,R2 BDI ligand (R1,R2 BDI=HC[C(R1)N(R2)]2 ) influence sterics and Lewis acidity. Ligand bulk increases along the row Me,DIPP BDI
RESUMEN
The chiral building block (R)-(+)-2,2'-diamino-1,1'-binaphthyl, (R)-BINAM, which is often used as backbone in privileged enantioselective catalysts, was converted to a series of N-substituted proligands R1-H2 (R = CH2tBu, C(H)Ph2, PPh2, dibenzosuberane, 8-quinoline). After double deprotonation with strong Mg or Ca bases, a series of alkaline earth (Ae) metal catalysts R1-Ae·(THF)n was obtained. Crystal structures of these C2-symmetric catalysts have been analyzed by quadrant models which show that the ligands with C(H)Ph2, dibenzosuberane and 8-quinoline substituents should give the best steric discrimination for the enantioselective intramolecular alkene hydroamination (IAH) of the aminoalkenes H2C[double bond, length as m-dash]CHCH2CR'2CH2NH2 (CR'2 = CPh2, CCy or CMe2). The dianionic R12- ligand in R1-Ae·(THF)n functions as reagent that deprotonates the aminoalkene substrate, while the monoanionic (R1-H)- ligand formed in this reaction functions as a chiral spectator ligand that controls the enantioselectivity of the ring closure reaction. Depending on the substituent R in the BINAM ligand, full cyclization of aminoalkenes to chiral pyrrolidine products as fast as 5 minutes was observed. Product analysis furnished enantioselectivities up to 57% ee, which marks the highest enantioselectivity reported for Ca catalyzed IAH. Higher selectivities are impeded by double protonation of the R12- ligand leading to complete loss of chiral information in the catalytically active species.
RESUMEN
Commercial LiAlH4 can be used in catalytic quantities in the hydrogenation of imines to amines with H2 . Combined experimental and theoretical investigations give deeper insight in the mechanism and identifies the most likely catalytic cycle. Activity is lost when Li in LiAlH4 is exchanged for Na or K. Exchanging Al for B or Ga also led to dramatically reduced activities. This indicates a heterobimetallic mechanism in which cooperation between Li and Al is crucial. Potential intermediates on the catalytic pathway have been isolated from reactions of MAlH4 (M=Li, Na, K) and different imines. Depending on the imine, double, triple or quadruple imine insertion has been observed. Prolonged reaction of LiAlH4 with PhC(H)=NtBu led to a side-reaction and gave the double insertion product LiAlH2 [N]2 ([N]=N(tBu)CH2 Ph) which at higher temperature reacts further by ortho-metallation of the Ph ring. A DFT study led to a number of conclusions. The most likely catalyst for hydrogenation of PhC(H)=NtBu with LiAlH4 is LiAlH2 [N]2 . Insertion of a third imine via a heterobimetallic transition state has a barrier of +23.2â kcal mol-1 (ΔH). The rate-determining step is hydrogenolysis of LiAlH[N]3 with H2 with a barrier of +29.2â kcal mol-1 . In agreement with experiment, replacing Li for Na (or K) and Al for B (or Ga) led to higher calculated barriers. Also, the AlH4 - anion showed very high barriers. Calculations support the experimentally observed effects of the imine substituents at C and N: the lowest barriers are calculated for imines with aryl-substituents at C and alkyl-substituents at N.